Reset-HcsFactoryDefault

Reset-HcsFactoryDefault

Resets one or both controllers to a factory default state.

Sintaxis

Parameter Set: Default
Reset-HcsFactoryDefault [[-Format] <String> ] [[-Scope] <ClusterScope> ] [-Force] [ <CommonParameters>]

Descripción detallada

The Reset-HcsFactoryDefault cmdlet resets one or both controllers to a factory default state. If you reset both controllers, you lose all data, metadata, and controller settings. The controllers revert to the operating system that the factory installed.

If you use Reset-HcsFactoryDefault to reset only one controller, that controller gets the current operating system image from its peer controller. You should reset only one controller if the peer controller is running and is in a healthy state. You do not lose any data if you reset only one controller.

The default behavior of this cmdlet is to reset both controllers.

Parámetros

-Force

Fuerza que el comando se ejecute sin pedir confirmación al usuario.

-Format<String>

Specifies the format for how the shared serial-attached SCSI (SAS) disks where customer data is stored are formatted.

-Scope<ClusterScope>

Specifies the scope. Los valores aceptables para este parámetro son los siguientes:

-- Cluster. Disable support access for both nodes. This option resets both controllers. This option loses all data. You must run setup again. This is the default.
-- Controller. Disable support access for the local node only. This option resets only the current controller. This option resets the current controller. That controller forms a cluster with the peer controller once the reset is complete. No data loss occurs in this process.

<CommonParameters>

Este cmdlet admite los siguientes parámetros comunes: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer y -OutVariable. Para obtener más información, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Entradas

El tipo de entrada es el tipo de los objetos que se pueden canalizar al cmdlet.

Salidas

El tipo de resultado es el tipo de objetos que emite el cmdlet.

Ejemplos

Example 1: Reset both controllers to the default factory state

This command resets both controllers to the default factory state.

PS C:\> Reset-HCSFactoryDefault

Example 2: Reset both controllers to the factory default state without confirmation

This command resets both controllers to the factory default state. The user is not prompted for confirmation.

PS C:\> Reset-HCSFactoryDefault -Force

Example 3: Reset the current controller to the factory default state

This command resets the current controller to the factory default state.

PS C:\> Reset-HCSFactoryDefault -Scope Controller