DataReader Classe

Définition

Lit les données d’un flux d’entrée.

public ref class DataReader sealed : IClosable, IDataReader
/// [Windows.Foundation.Metadata.Activatable(Windows.Storage.Streams.IDataReaderFactory, 65536, Windows.Foundation.UniversalApiContract)]
/// [Windows.Foundation.Metadata.ContractVersion(Windows.Foundation.UniversalApiContract, 65536)]
/// [Windows.Foundation.Metadata.MarshalingBehavior(Windows.Foundation.Metadata.MarshalingType.Agile)]
/// [Windows.Foundation.Metadata.Threading(Windows.Foundation.Metadata.ThreadingModel.Both)]
class DataReader final : IClosable, IDataReader
/// [Windows.Foundation.Metadata.ContractVersion(Windows.Foundation.UniversalApiContract, 65536)]
/// [Windows.Foundation.Metadata.MarshalingBehavior(Windows.Foundation.Metadata.MarshalingType.Agile)]
/// [Windows.Foundation.Metadata.Threading(Windows.Foundation.Metadata.ThreadingModel.Both)]
/// [Windows.Foundation.Metadata.Activatable(Windows.Storage.Streams.IDataReaderFactory, 65536, "Windows.Foundation.UniversalApiContract")]
class DataReader final : IClosable, IDataReader
[Windows.Foundation.Metadata.Activatable(typeof(Windows.Storage.Streams.IDataReaderFactory), 65536, typeof(Windows.Foundation.UniversalApiContract))]
[Windows.Foundation.Metadata.ContractVersion(typeof(Windows.Foundation.UniversalApiContract), 65536)]
[Windows.Foundation.Metadata.MarshalingBehavior(Windows.Foundation.Metadata.MarshalingType.Agile)]
[Windows.Foundation.Metadata.Threading(Windows.Foundation.Metadata.ThreadingModel.Both)]
public sealed class DataReader : System.IDisposable, IDataReader
[Windows.Foundation.Metadata.ContractVersion(typeof(Windows.Foundation.UniversalApiContract), 65536)]
[Windows.Foundation.Metadata.MarshalingBehavior(Windows.Foundation.Metadata.MarshalingType.Agile)]
[Windows.Foundation.Metadata.Threading(Windows.Foundation.Metadata.ThreadingModel.Both)]
[Windows.Foundation.Metadata.Activatable(typeof(Windows.Storage.Streams.IDataReaderFactory), 65536, "Windows.Foundation.UniversalApiContract")]
public sealed class DataReader : System.IDisposable, IDataReader
function DataReader(inputStream)
Public NotInheritable Class DataReader
Implements IDataReader, IDisposable
Héritage
Object Platform::Object IInspectable DataReader
Attributs
Implémente

Configuration requise pour Windows

Famille d’appareils
Windows 10 (introduit dans 10.0.10240.0)
API contract
Windows.Foundation.UniversalApiContract (introduit dans v1.0)

Exemples

L’exemple de code suivant montre comment écrire et lire des chaînes dans un flux en mémoire. Pour obtenir l’exemple d’application complet en C# et en C++/CX, consultez Exemple de sérialisation et désérialisation des données.

using System;
using System.Diagnostics;
using Windows.Foundation;
using Windows.UI.Xaml;
using Windows.UI.Xaml.Controls;
using Windows.UI.Xaml.Navigation;

// This is the click handler for the 'Copy Strings' button.  Here we will parse the
// strings contained in the ElementsToWrite text block, write them to a stream using
// DataWriter, retrieve them using DataReader, and output the results in the
// ElementsRead text block.
private async void TransferData(object sender, RoutedEventArgs e)
{
    // Initialize the in-memory stream where data will be stored.
    using (var stream = new Windows.Storage.Streams.InMemoryRandomAccessStream())
    {
        // Create the data writer object backed by the in-memory stream.
        using (var dataWriter = new Windows.Storage.Streams.DataWriter(stream))
        {
            dataWriter.UnicodeEncoding = Windows.Storage.Streams.UnicodeEncoding.Utf8;
            dataWriter.ByteOrder = Windows.Storage.Streams.ByteOrder.LittleEndian;

            // Parse the input stream and write each element separately.
            string[] inputElements = ElementsToWrite.Text.Split(';');
            foreach (string inputElement in inputElements)
            {
                uint inputElementSize = dataWriter.MeasureString(inputElement);
                dataWriter.WriteUInt32(inputElementSize);
                dataWriter.WriteString(inputElement);
            }

            // Send the contents of the writer to the backing stream.
            await dataWriter.StoreAsync();

            // For the in-memory stream implementation we are using, the flushAsync call 
            // is superfluous,but other types of streams may require it.
            await dataWriter.FlushAsync();

            // In order to prolong the lifetime of the stream, detach it from the 
            // DataWriter so that it will not be closed when Dispose() is called on 
            // dataWriter. Were we to fail to detach the stream, the call to 
            // dataWriter.Dispose() would close the underlying stream, preventing 
            // its subsequent use by the DataReader below.
            dataWriter.DetachStream();
        }

        // Create the input stream at position 0 so that the stream can be read 
        // from the beginning.
        using (var inputStream = stream.GetInputStreamAt(0))
        {
            using (var dataReader = new Windows.Storage.Streams.DataReader(inputStream))
            {
                // The encoding and byte order need to match the settings of the writer 
                // we previously used.
                dataReader.UnicodeEncoding = Windows.Storage.Streams.UnicodeEncoding.Utf8;
                dataReader.ByteOrder = Windows.Storage.Streams.ByteOrder.LittleEndian;

                // Once we have written the contents successfully we load the stream.
                await dataReader.LoadAsync((uint)stream.Size);

                var receivedStrings = "";

                // Keep reading until we consume the complete stream.
                while (dataReader.UnconsumedBufferLength > 0)
                {
                    // Note that the call to readString requires a length of "code units" 
                    // to read. This is the reason each string is preceded by its length 
                    // when "on the wire".
                    uint bytesToRead = dataReader.ReadUInt32();
                    receivedStrings += dataReader.ReadString(bytesToRead) + "\n";
                }

                // Populate the ElementsRead text block with the items we read 
                // from the stream.
                ElementsRead.Text = receivedStrings;
            }
        }
    }
}
#include "pch.h"
#include "WriteReadStream.h" // header file for WriteReadStream.xaml.
#include <sstream>

#include <winrt/Windows.Foundation.h>
#include <winrt/Windows.Storage.Streams.h>

using namespace winrt;

std::array<winrt::hstring, 5> m_inputElements{ L"Hello", L"World", L"1 2 3 4 5", L"Très bien!", L"Goodbye" };

WriteReadStream::WriteReadStream()
{
    InitializeComponent();

    // Populate the text block with the input elements.
    std::wstringstream stringstream;
    for (winrt::hstring const& element : m_inputElements)
    {
        stringstream << element.c_str() << L";";
    }
    ElementsToWrite().Text(stringstream.str().c_str());
}

// This is the click handler for the 'Copy Strings' button. Here we will parse the
// strings contained in the ElementsToWrite text block, write them to a stream using
// DataWriter, retrieve them using DataReader, and output the results in the
// ElementsRead text block.
winrt::Windows::Foundation::IAsyncAction WriteReadStream::TransferData(
    Windows::Foundation::IInspectable const& /* sender */,
    Windows::UI::Xaml::RoutedEventArgs const& /* args */)
{
    // Initialize the in-memory stream where data will be stored.
    Windows::Storage::Streams::InMemoryRandomAccessStream stream;

    // Create the DataWriter object backed by the in-memory stream. When
    // dataWriter goes out of scope, it closes the underlying stream.
    Windows::Storage::Streams::DataWriter dataWriter{ stream };
    dataWriter.UnicodeEncoding(Windows::Storage::Streams::UnicodeEncoding::Utf16LE);
    dataWriter.ByteOrder(Windows::Storage::Streams::ByteOrder::LittleEndian);

    // Create the data reader by using the input stream set at position 0 so that 
    // the stream will be read from the beginning regardless of the position that
    // the original stream ends up in after the store.
    Windows::Storage::Streams::IInputStream inputStream{ stream.GetInputStreamAt(0) };
    Windows::Storage::Streams::DataReader dataReader{ inputStream };
    // The encoding and byte order need to match the settings of the writer that
    // we previously used.
    dataReader.UnicodeEncoding(Windows::Storage::Streams::UnicodeEncoding::Utf16LE);
    dataReader.ByteOrder(Windows::Storage::Streams::ByteOrder::LittleEndian);

    // Write the input data to the output stream. Serialize the elements by writing
    // each string separately, preceded by its length in bytes.
    for (winrt::hstring const& element : m_inputElements)
    {
        dataWriter.WriteUInt32(element.size());
        dataWriter.WriteString(element);
    }

    // Send the contents of the writer to the backing stream.
    unsigned int bytesStored{ co_await dataWriter.StoreAsync() };

    // For the in-memory stream implementation we are using, the FlushAsync() call 
    // is superfluous, but other types of streams may require it.
    if (co_await dataWriter.FlushAsync())
    {
        try
        {
            // Once we've written the contents successfully, we load the stream.
            unsigned int bytesLoaded{ co_await dataReader.LoadAsync((unsigned int)stream.Size()) };

            std::wstringstream readFromStream;

            // Keep reading until we consume the complete stream.
            while (dataReader.UnconsumedBufferLength() > 0)
            {
                // Note that the call to ReadString requires a length of 
                // "code units" to read. This is the reason each string is 
                // preceded by its length when "on the wire".
                unsigned int bytesToRead{ dataReader.ReadUInt32() };
                readFromStream << dataReader.ReadString(bytesToRead).c_str() << std::endl;
            }

            // Populate the ElementsRead text block with the items we read from the stream
            ElementsRead().Text(readFromStream.str().c_str());
        }
        catch (winrt::hresult_error const& ex)
        {
            ElementsRead().Text(L"Error: " + ex.message());
        }
    }
}
#include "pch.h"
#include "WriteReadStream.xaml.h"

using namespace Concurrency;
using namespace DataReaderWriter;
using namespace Platform;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Xaml;
using namespace Windows::UI::Xaml::Controls;
using namespace Windows::UI::Xaml::Navigation;

Array<String^>^ _inputElements = ref new Array<String^>
{
    "Hello", "World", "1 2 3 4 5", "Très bien!", "Goodbye"
};

WriteReadStream::WriteReadStream()
{
    InitializeComponent();

    // Populate the text block with the input elements.
    ElementsToWrite->Text = "";
    for (unsigned int i = 0; i < _inputElements->Length; i++)
    {
        ElementsToWrite->Text += _inputElements[i] + ";";
    }
}

// Invoked when this page is about to be displayed in a Frame.
void WriteReadStream::OnNavigatedTo(NavigationEventArgs^ e)
{
    // Get a pointer to our main page.
    rootPage = MainPage::Current;
}

// This is the click handler for the 'Copy Strings' button.  Here we will parse the
// strings contained in the ElementsToWrite text block, write them to a stream using
// DataWriter, retrieve them using DataReader, and output the results in the
// ElementsRead text block.
void DataReaderWriter::WriteReadStream::TransferData(
Platform::Object^ sender, Windows::UI::Xaml::RoutedEventArgs^ e)
{
    // Initialize the in-memory stream where data will be stored.
    InMemoryRandomAccessStream^ stream = ref new InMemoryRandomAccessStream();

    // Create the DataWriter object backed by the in-memory stream.  When
    // dataWriter is deleted, it will also close the underlying stream.
    DataWriter^ dataWriter = ref new DataWriter(stream);
    dataWriter->UnicodeEncoding = UnicodeEncoding::Utf8;
    dataWriter->ByteOrder = ByteOrder::LittleEndian;

    // Create the data reader by using the input stream set at position 0 so that 
    // the stream will be read from the beginning regardless of where the position
    // the original stream ends up in after the store.
    IInputStream^ inputStream = stream->GetInputStreamAt(0);
    DataReader^ dataReader = ref new DataReader(inputStream);
    // The encoding and byte order need to match the settings of the writer 
    // we previously used.
    dataReader->UnicodeEncoding = UnicodeEncoding::Utf8;
    dataReader->ByteOrder = ByteOrder::LittleEndian;

    // Write the input data to the output stream.  Serialize the elements by writing
    // each string separately, preceded by its length.
    for (unsigned int i = 0; i < _inputElements->Length; i++) 
    {
        unsigned int inputElementSize = dataWriter->MeasureString(_inputElements[i]);
        dataWriter->WriteUInt32(inputElementSize);
        dataWriter->WriteString(_inputElements[i]);
    }

    // Send the contents of the writer to the backing stream.
    create_task(dataWriter->StoreAsync()).then([this, dataWriter] (unsigned int bytesStored)
    {
        // For the in-memory stream implementation we are using, the FlushAsync() call 
        // is superfluous, but other types of streams may require it.
        return dataWriter->FlushAsync();
    }).then([this, dataReader, stream] (bool flushOp)
    {
        // Once we have written the contents successfully we load the stream.
        return dataReader->LoadAsync((unsigned int) stream->Size);
    }).then([this, dataReader] (task<unsigned int> bytesLoaded)
    {
        try
        {
            // Check for possible exceptions that could have been thrown 
            // in the async call chain.
            bytesLoaded.get();

            String^ readFromStream = "";

            // Keep reading until we consume the complete stream.
            while (dataReader->UnconsumedBufferLength > 0)
            {
                // Note that the call to ReadString requires a length of 
                // "code units" to read. This is the reason each string is 
                // preceded by its length when "on the wire".
                unsigned int bytesToRead = dataReader->ReadUInt32();
                readFromStream += dataReader->ReadString(bytesToRead) + "\n";
            }

            // Populate the ElementsRead text block with the items we read from the stream
            ElementsRead->Text = readFromStream;
        }
        catch (Exception^ e)
        {
            ElementsRead->Text = "Error: " + e->Message;
        }
    });
}

Remarques

Les instances d’objets DataReader ne prennent pas en charge les opérations de lecture simultanées. Si une application lit ou détache simultanément un flux d’un instance DataReader en cours de lecture, l’appel à l’objet échoue avec l’erreur HRESULT_FROM_WIN32(ERROR_INVALID_OPERATION).

Constructeurs

DataReader(IInputStream)

Crée et initialise une nouvelle instance du lecteur de données.

Propriétés

ByteOrder

Obtient ou définit l’ordre d’octet des données dans le flux d’entrée.

InputStreamOptions

Obtient ou définit les options de lecture pour le flux d’entrée.

UnconsumedBufferLength

Obtient la taille de la mémoire tampon qui n’a pas été lue.

UnicodeEncoding

Obtient ou définit l’encodage de caractères Unicode pour le flux d’entrée.

Méthodes

Close()

Ferme le flux actuel et libère les ressources système.

DetachBuffer()

Détache la mémoire tampon associée au lecteur de données. Cela est utile si vous souhaitez conserver la mémoire tampon après avoir éliminé le lecteur de données.

DetachStream()

Détache le flux associé au lecteur de données.

Dispose()

Exécute les tâches définies par l'application associées à la libération ou à la redéfinition des ressources non managées.

FromBuffer(IBuffer)

Crée une instance du lecteur de données avec les données de la mémoire tampon spécifiée.

LoadAsync(UInt32)

Charge des données à partir du flux d’entrée.

ReadBoolean()

Lit une valeur booléenne à partir du flux d’entrée.

ReadBuffer(UInt32)

Lit une mémoire tampon à partir du flux d’entrée.

ReadByte()

Lit une valeur d’octet à partir du flux d’entrée.

ReadBytes(Byte[])

Lit un tableau de valeurs d’octets à partir du flux d’entrée.

ReadDateTime()

Lit une valeur de date et d’heure à partir du flux d’entrée.

ReadDouble()

Lit une valeur à virgule flottante à partir du flux d’entrée.

ReadGuid()

Lit une valeur GUID à partir du flux d’entrée.

ReadInt16()

Lit une valeur entière 16 bits à partir du flux d’entrée.

ReadInt32()

Lit une valeur entière 32 bits à partir du flux d’entrée.

ReadInt64()

Lit une valeur entière 64 bits à partir du flux d’entrée.

ReadSingle()

Lit une valeur à virgule flottante à partir du flux d’entrée.

ReadString(UInt32)

Lit une valeur de chaîne à partir du flux d’entrée.

ReadTimeSpan()

Lit une valeur d’intervalle de temps à partir du flux d’entrée.

ReadUInt16()

Lit un entier non signé 16 bits à partir du flux d’entrée.

ReadUInt32()

Lit un entier non signé 32 bits à partir du flux d’entrée.

ReadUInt64()

Lit un entier non signé 64 bits à partir du flux d’entrée.

S’applique à

Voir aussi