Encodian

The file content of the source PDF file

The filename of the file

The file content of the file

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The HTML to embed as a header or footer within the document

Set whether the HTML should be added to the header, footer of both locations.

Set whether to ignore the first page when the header / footers are added.

Set the top margin value (mm).

Set the bottom margin value (mm).

Set the right margin value (mm).

Set the left margin value (mm).

Set which pages within the PDF document to apply the HTML header or footer.

Specify the page numbers where the HTML header or footer should be applied, this property only applies when the 'Apply To' property is set to 'Specific'.

Specify the page numbers where the HTML header or footer should not applied, this property only applies when the 'Apply To' property is set to 'Specific'.

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source file, the file extension is mandatory: 'file.png' and not 'file'

The file content of the source file

The filename of the watermark image file, the file extension is mandatory: 'file.png' and not 'file'

The content of the watermark image file

The position of the image watermark on the image provided

Set the vertical watermark offset in pixels, starting from the top of the image. This setting will only apply when the 'Watermark Position' property is set to 'Custom'.

Set the horizontal watermark offset in pixels, starting from the left of the image. This setting will only apply when the 'Watermark Position' property is set to 'Custom'.

Set the rotation angle of the image watermark in degrees

The opacity of the image watermark, valid values range from 0.0+ to 1.0, the default value is 0.7

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The filename for the watermark image file, the file extension is mandatory: 'file.jpg' and not 'file'

The content of the watermark image file

Set whether to skip applying the watermark to the first page.

The orientation of the image to embed as a watermark within the document

The opacity of the text watermark, valid values range from 0.0+ to 1.0, the default value is 0.7

Override and manually set an identifier for the applied watermark

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The filename for the watermark image file, the file extension is mandatory: 'file.jpg' and not 'file'

The content of the watermark image file

Set whether to skip applying the watermark to the first page.

Set where in the document to apply the watermark.

Specify the page numbers where the watermark should be applied, this only applies when the 'Apply To' property is set to 'Specific'.

Specify the page numbers where the watermark should not applied, this property only applies when the 'Apply To' property is set to 'Specific'.

The opacity of the text watermark, valid values range from 0.0+ to 1.0, the default value is 0.7

Set the rotation angle of the image watermark in degrees.

Set the quality of the image watermark from 1 to 100.

Set the X offset for positioning the watermark image on the page.

Set the Y offset for positioning the watermark image on the page.

Set the multiple to either reduce (less than 1.0) or increase the size of the image (greater than 1.0), for example: 1.2 is equal to 120%, and 0.7 is equal to 70%.

If set to 'true' the watermark image will be added to the background of the page.

Override and manually set an identifier for the applied watermark

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source Microsoft Word file, the file extension is mandatory: 'file.docx' and not 'file'

The file content of the source Microsoft Word file

The filename for the watermark image file, the file extension is mandatory: 'file.jpg' and not 'file'

The content of the watermark image file

Change the thread culture used to process the request

Set the scale factor expressed as a fraction of the image. The default value is 1, valid values range from 0 to 65.5

Set whether the text watermark should be semi transparent

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

Set which page to start adding page number(s) from.

Set the starting number for the page number(s) added to the document.

Set the format of the page number(s) added to the document, where [PageNumber] is replaced by the current page number and [TotalPages] is replaced by the total number of pages.

Set the horizontal alignment of the page number(s) added to the document, the default value is Center.

Set a custom number format, for example '{0:00000}' would generate 00001

Set the top margin value (pt). The default value is set to 20.

Set the right margin value(pt). The default value is set to 20.

Set the bottom margin value (pt). The default value is set to 20.

Set the left margin value (pt). The default value is set to 20.

Set whether the page number(s) should be added to top or bottom layer of the PDF document. The default setting (false) adds the page number(s) to the top layer.

Set the HTML colour of the font, the default colour is set to #000000.

Set the size of the font, the default size is set to 14.

Set the opacity of the page number(s), valid values range from 0.0+ to 1.0, the default value is 1.0

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The file content of the source Microsoft Excel file

The JSON dataset to be processed and added as rows to the Excel file provided

The row number after which the data provided will be inserted

The column number after which the data provided will be inserted

Specify the name of a specific worksheet

Auto parse numeric and date values, setting the cell format category to 'Number' or 'Date'

Set the date and time format - https://video2.skills-academy.com/en-us/dotnet/standard/base-types/custom-date-and-time-format-strings

Set the numeric format - https://video2.skills-academy.com/en-us/dotnet/standard/base-types/standard-numeric-format-strings

Ignores titles of JSON attributes when converting JSON to Excel

Ignore JSON properties which contain null values.

Change the thread culture used to process the request.

The filename of the source image file, the file extension is mandatory: 'file.jpg' and not 'file'

The file content of the source image file

The text to embed as a watermark within the image

The position of the text to embed as a watermark within the image

The font applied to the text watermark, the default font is set to Arial.

The HTML colour applied to the text watermark, the default colour is set to #E81123.

The size of the font applied to the text watermark, the default size is set to 10.

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The text to embed as a watermark within the document

Set whether to skip applying the watermark to the first page.

The orientation of the text to embed as a watermark within the document

The font applied to the text watermark, the default font is set to Arial.

The HTML colour applied to the text watermark, the default colour is set to #E81123.

The size of the font applied to the text watermark, the default size is set to 34.

The opacity of the text watermark, valid values range from 0.0+ to 1.0, the default value is 1.0

Override and manually set an identifier for the applied watermark

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The text to embed as a watermark within the document. Add carriage return control characters (backslash r) to manually split text onto new lines.

Set whether to skip applying the watermark to the first page.

Set where in the document to apply the watermark.

Specify the page numbers where the watermark should be applied, this proporty only applies when the 'Apply To' property is set to 'Specific'.

Specify the page numbers where the watermark should not applied, this property only applies when the 'Apply To' property is set to 'Specific'.

The font applied to the text watermark, the default font is set to Arial.

The HTML colour applied to the text watermark, the default colour is set to #E81123.

The size of the font applied to the text watermark, the default size is set to 34.

The opacity of the text watermark, valid values range from 0.0+ to 1.0, the default value is 1.0

The encoding type to apply to the text watermark.

Set the horizontal alignment of the watermark, the default value is Center.

Set the vertical alignment of the watermark, the default value is Center.

Set the text alignment of the watermark, the default value is Center.

Set the rotation angle of the text watermark.

Set whether the text watermark should automatically wrap.

Set the row width applied when the watermark is set to automatically wrap.

Set the whether the text should be automatically sized to fit the width of the container.

Set the width of the watermark container when automatic scaling is enabled.

Set the height of the watermark container when automatic scaling is enabled.

Set whether the watermark should be added to the top or bottom layer. If 'True' the watermark is added to the bottom layer.

Set the vertical watermark indent, starting from the bottom and overriding the VerticalAlignment property.

Set the horizontal watermark indent, starting from the left and overriding the HorizontalAlignment property.

Set whether the text watermark should be added as text or an image.

Override and manually set an identifier for the applied watermark

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source Microsoft Word file, the file extension is mandatory: 'file.docx' and not 'file'

The file content of the source Microsoft Word file

The text to embed as a watermark within the Microsoft Word file

Set the orientation of the text watermark

Change the thread culture used to process the request

Set the font type applied to the text watermark, the default font is set to Calibri

Set the HTML colour applied to the text watermark, the default colour is set to #808080 (Grey)

Set the font size applied to the text watermark, The default size is set to 0 (Auto)

Set whether the text watermark should be semi transparent

The filename of the output ZIP package

The filename of the file

The file content of the file

Set a password to protect and encrypt the archive (ZIP file)

Set the encryption level which will be applied to a password protected archive (ZIP file)

Set the encoding type.

The file content of the first Microsoft Word or PDF file to compare.

The file content of the second Microsoft Word or PDF file to compare.

Set the name of the author used to denote differences in the output document.

Specifies whether to ignore document formatting differences

Specifies whether to compare differences in documents as case insensitive

Specifies whether to compare differences in comments

Specifies whether to compare the differences in data contained in tables

Specifies whether to compare differences in fields. By default fields

Specifies whether to compare differences in footnotes and endnotes

Specifies whether to compare differences in the data contained within text boxes

Specifies whether to compare differences in the data contained within headers and footers

The file content of the source image file

Select the image file format.

The file content of the source PDF file

Contained images will be compressed, aligned to the value of the 'Image Quality' property

Sets the quality for compressed images: 1 > 100

Specifies the maximum resolution of images (dpi), if the image has a higher resolution it will be scaled dynamically.

If 'Compress Images' and 'Resize Images' are enabled, images will be resized where the image resolution is greater than the specified 'Max Resolution' property.

Remove private information from the PDF document, i.e. page piece information.

Remove all unused objects (i.e. objects which do not have a reference) are removed from PDF document.

Remove all unused resources from the PDF document.

Link duplicate streams and store them as a single object. This can decrease document size in some cases (for example, where the same document was merged multiple times).

Page contents will be reused when the PDF document is optimized for equal pages.

Remove all embedded fonts. The document size will decrease but the document may become unreadable if the correct font is not installed on the user's machine.

Flatten all annotations contained within the PDF document.

Delete all annotations contained within the PDF document.

Flatten all fields contained within the PDF document (AcroForms only).

The filename of the source file, the file extension is mandatory: 'file.pptx' and not 'file'

The file content of the source file

Sets the compression rate for images. A higher compression rate generates smaller file sizes.

Compresses the file provided by removing unused characters from embedded fonts

Compresses the file provided by removing unused layout slides

Compresses the file provided by removing unused master slides

Resizes the images to fit the frame in which they are displayed

Change the thread culture used to process the request.

Set the output file type

Request object, refer to schema definition: DtoConvertCad

The filename of the source file, the file extension is mandatory: 'file.msg' and not 'file'

The file content of the source file

Set whether attachments should be automatically converted and merged with the output.pdf

Set whether bookmarks should be automatically created for Microsoft Word documents which are converted to PDF.

Set PDF/A Compliance option

Set the PDF/A Compliance Level, the default value is PDF_A_2A.

Change the thread culture used to process the request.

Set the output file type

Request object, refer to schema definition: DtoConvertExcel

The filename of the output PDF document

Optional - The file content of the source HTML file.

Optional - The HTML which will be converted to a PDF document

Optional - The web address to the web page which will be converted to a PDF document

Set page oprientation (Landscape or portrait).

Set the page size for the output PDF document, A4 is the default size.

Set the viewport used to render the HTML.

Set the top margin value (pixels)

Set the bottom margin value (pixels)

Set the right margin value (pixels)

Set the left margin value (pixels)

Enable or disable auto creation of PDF bookmarks.

Enable or disable javascript.

Enable or disable hyperlinks.

Set whether the HTML content should be converted to a PDF form.

Set whether the data provided in the HTML Data field should be decoded.

Set whether the standard or print style sheets should be used for HTML conversion.

Set whether to repeat the table header on every page break. The default value is true

Set whether to repeat the table footer on every page break. The default value is true

Set whether to split images

Set whether to split text lines

Set the delay in milliseconds between the HTML being received and the conversion to allo time for JavaScript to load.

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the output DOCX document

Optional - The file content of the source HTML file.

Optional - The HTML which will be converted to a Word document

Optional - The web address to the web page which will be converted to a Word document

Set page oprientation (Landscape or portrait).

Set the page size for the output Word document, A4 is the default size.

Set whether the data provided in the HTML Data field should be decoded.

Set the encoding type for the HTML.

Set the top margin value (pt. The default value is set to -1, whereby a minus value does not change the existing page margin value.

Set the bottom margin value (pt. The default value is set to -1, whereby a minus value does not change the existing page margin value.

Set the right margin value (pt. The default value is set to -1, whereby a minus value does not change the existing page margin value.

Set the left margin value (pt. The default value is set to -1, whereby a minus value does not change the existing page margin value.

Set the compliance level applied to the HTML source during conversion

The file content of the source image file

Select the current image file format.

Select the new image file format.

The filename of the output document

Optional - The file content of the source JSON file.

Optional - The JSON data to be converted to an Excel document

The first row to be written to

The first column to be written to

The name of the worksheet that the JSON data is added to

Auto parse numeric and date values, setting the cell format category to 'Number' or 'Date'

Set the date and time format - https://video2.skills-academy.com/en-us/dotnet/standard/base-types/custom-date-and-time-format-strings

Set the numeric format - https://video2.skills-academy.com/en-us/dotnet/standard/base-types/standard-numeric-format-strings

Ignore JSON properties which contain null values.

Set the title font color

Set the title to bold

Set whether a titles text is wrapped

Ignores titles of JSON attributes when converting JSON to Excel

Change the thread culture used to process the request.

The file content of the source PDF file.

Set the format for the output image files

The prefix filename for the output image files

Set the image resolution

The file content of the source PDF file.

The filename of the output JPG file

Set the image quality between 1 and 100

Set the image resolution

Set the resolution unit

Set the compression color mode

Set the compression type

Apply enhanced compression which will further reduce the image size for some conversion configurations

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

Set the PDF/A Compliance Level, the default value is PDF_A_2A.

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The file content of the source PDF file.

The filename of the output PNG file

Set progressive image rendering

Set the compression level

Set the image resolution

Set the bit depth

The file content of the source PDF file.

The filename of the output TIFF file

Set the image resolution

Set the compression type

Set the page orientation of the TIFF file

Set whether blank pages should be skipped upon conversion

The filename of the output DOCX document

The file content of the source PDF file.

Set the output file type

Request object, refer to schema definition: DtoConvertPowerPoint

The filename of the output PDF document

Optional - Please provide either The file content of the source file and source filename or text data.

Optional - Please provide either the text data which will be converted to a PDF document or The file content of the source file and source filename.

The encoding type used for text conversion.

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the source file

The filename of the output PDF document

Set MS Office document comments and tracked changes removal option

Set PDF/A Compliance option

Set the PDF/A Compliance Level, the default value is PDF_A_2A.

Set whether bookmarks should be automatically created for Microsoft Word documents which are converted to PDF.

Change the thread culture used to process the request.

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Set the output file type

Request object, refer to schema definition: DtoConvertVisio

Set the output file type

Request object, refer to schema definition: DtoConvertWord

The filename of the source Microsoft Word file, the file extension is mandatory: 'file.doc' and not 'file'

The file content of the source Microsoft Word file

The filename of the output PDF document

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Set the barcode type

Request object, refer to schema definition: DtoResponseCreateBarcode

Set the string value used to generate the QR barcode.

Set the image format for barcode.

Set the QR code height (pixels).

Set the QR code width (pixels).

Set the QR auto size mode, use 'Nearest' to assure QR code readability

Set the QR code foreground color (HTML Color #000000)

Set the QR code background color (HTML Color #FFFFFF)

Set whether the QR code border is visible

Set the QR code border color (HTML Color #000000)

Set the QR code border style

Set the QR code border width in pixels

Set the QR code border image resolution (dpi)

Set the QR code encode mode

Set the QR code encode type

Set the QR code text encoding type

The filename of the source logo file, the file extension is mandatory: 'file.png' and not 'file'

The file content of the source logo file

Set the position of the logo

Set the caption above text

Set the font for the caption text

Set the size of font for the caption text

Set the font colour for the caption text

Set the alignment of the caption text

Set the wrapping of the caption text

Set the caption below text

Set the font for the caption text

Set the size of font for the caption text

Set the font colour for the caption text

Set the alignment of the caption text

Set the wrapping of the caption text

Set the crop type action

Request object, refer to schema definition: DtoCropImage

The file content of the source Excel file

Set the number of the first row to delete

Set the number of the last row to delete

Set the name of a specific worksheet to delete the rows from

Set an array of rows to delete, conforming to following structure: [23-56],[100-120],[156-8988]

The filename of the source Microsoft Word file, the file extension is mandatory: 'file.docx' and not 'file'

The file content of the source Microsoft Word document

Change the thread culture used to process the request.

The filename of the source Microsoft Word file, the file extension is mandatory: 'file.docx' and not 'file'

The file content of the source Microsoft Word document

Change the thread culture used to process the request.

The file content of the source PDF file

The file content of the source Microsoft Excel file

A comma separated list of the names of the worksheets to extract: Sales, Totals, Year to Date

A comma separated list of indexes of the worksheets to extract: 1,3,4

The file content of the archive

Set a password for opening the archive

Set whether to extract files contained within folders which are present in the archive

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The name assigned to the extracted image

The number of points from the left edge of the page to the lower left corner of the rectangle image region

The number of points from the bottom edge of the page to the lower left corner of the rectangle image region

The number of points from the left edge of the page to the upper right corner of the rectangle image region

The number of points from the bottom edge of the page to the upper right corner of the rectangle image region

The number of the page to extract the image from

Extract the specified page as an image, ignoring and specificed coodinates

The resolution of the extracted image

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Select the image file format.

The file content of the source image file

Select the language used for OCR processing

Perform document clean-up operations, the default option will auto rotate, auto deskew and auto despeckle the document.

Automatically detects orientation and rotates it so that the text on it is upright oriented

Sets the minimum confidence percentage (0 to 100) used to control whether the rotation is applied, the default value is 70.

Detects the skew angle and rotates to remove that skew.

Automatically detects speckles and removes them.

This action analyzes a document and automatically adjusts brightness and contrast based on the analysis.

Locates border pixels and removes the pixels from the document,this is disabled by default.

This works only on color and grayscale documents. This operation smoothes background colors to eliminate or de-emphasize noise.

This only works on bitonal documents, it looks at groups of pixels, and finds isolated bumps and pits in the edges of those objects, and fills them in.

This action will remove shaded regions from bitonal documents.

Image Detergent works by changing pixels of similar color values to a central color value, which has the result of smoothing the image wherever regions of those colors appear.

Performs a 3x3 Average filter smoothing operation on the document, placing the output in the center of the window.

Detects and removes hole punch marks from a bitonal document.

Computes all necessary parameters by analyzing the input data before actually performing the binarization. The algorithm is tuned to typical document images, consisting of dark text on brighter background. It is robust to shadows, noise and background images.

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The name assigned to the text region

The number of points from the left edge of the page to the lower left corner of the rectangle text region

The number of points from the bottom edge of the page to the lower left corner of the rectangle text region

The number of points from the left edge of the page to the upper right corner of the rectangle text region

The number of points from the bottom edge of the page to the upper right corner of the rectangle text region

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The file content of the source PDF file

The JSON data to populate with the PDF Form with.

The file content of the source PDF file

The file content of the source image file

Set the orientation to flip the image provided

The filename of the source email file, the file extension is mandatory: 'file.eml' or 'file.msg' and not 'file'

The file content of the email

Set whether to extract inline attachments

The file content of the email

Change the thread culture used to process the request.

The file content of the source image file

Return the Latitude and Longitude as formatted string eg., '45° 26’ 21"N'

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The file content of the source PDF file

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

Sets the page number to begin text layer extraction from.

Sets the page number to end text layer extraction from. The default value is set to the last page of the PDF document provided.

The encoding type used for text extraction.

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The file content of the source file

Set the name of a specific worksheet to be exported

Set whether the first row specified is a header row

Set the number of the first row to be exported

Set the number of the last row to be rows to be exported

Set the number of the first column to be exported

Set the number of the last column to be exported

Set whether empty rows should be excluded from the export

Set whether empty cells should be exported

Set whether values should be exported as text, i.e. a number would be exported as "value":"3"

Set how Hyperlinks should be exported

Force row data to be exported as a JsonObject even when there is only a single worksheet contained within the file

Set the thread culture used to process the request

The file content of the Microsoft Word file

Sets the page number to begin text layer extraction from

Sets the page number to end text layer extraction from. The default value is set to the last page of the Microsoft Word document provided

Set whether comments should be removed prior to extracting text from the the Microsoft Word file

Set whether tracked changes should be accepted prior to extracting text from the the Microsoft Word file

Set whether headers and footers should be removed from the the Microsoft Word file

Change the thread culture used to process the request

The file content of the source Microsoft Word file

Set whether comments should be included within the tracked changes result(s)

Change the thread culture used to process the request

The filename of the source image file, the file extension is mandatory: 'file.png' and not 'file'

The file content of the source image file

Perform file clean-up operations, the default option will auto rotate, auto deskew and auto despeckle the provided file.

Automatically detects orientation and rotates so that the text is upright oriented, this is enabled by default.

Sets the minimum confidence percentage (0 to 100) used to control whether the rotation is applied, the default value is 60.

Detects the skew angle and rotates to remove that skew, this is enabled by default.

Automatically detects speckles and removes them, this is enabled by default.

This action analyzes a document and automatically adjusts brightness and contrast based on the analysis, this is disabled by default.

Locates border pixels and removes the pixels from the document, this is disabled by default.

This works only on color and grayscale documents. This operation smoothes background colors to eliminate or de-emphasize noise, this is disabled by default.

This only works on bitonal documents, it looks at groups of pixels, and finds isolated bumps and pits in the edges of those objects, and fills them in, this is disabled by default.

This action will remove shaded regions from bitonal documents, this is disabled by default.

Image Detergent works by changing pixels of similar color values to a central color value, which has the result of smoothing the image wherever regions of those colors appear, this is disabled by default.

Performs a 3x3 Average filter smoothing operation on the document, placing the output in the center of the window, this is disabled by default.

Detects and removes hole punch marks from a bitonal document, this is disabled by default.

Computes all necessary parameters by analyzing the input data before actually performing the binarization. The algorithm is tuned to typical document images, consisting of dark text on brighter background. It is robust to shadows, noise and background images, this is disabled by default.

The filename of the source image file, the file extension is mandatory: 'file.png' and not 'file'

The file content of the source image file

Perform file clean-up operations, the default option will auto rotate, apply colour balance, auto deskew and auto despeckle the provided file.

Detects the skew angle and rotates to remove that skew, this is enabled by default.

Automatically detects speckles and removes them, this is enabled by default.

Restores and balances the color quality within an image, this is enabled by default.

Locates border pixels and removes the pixels from the document, this is disabled by default.

Adjusts the contrast in the current image.

Automatically reduces the red reflection of the flash seen in the eyes of people in color flash photo images.

Blurs the current image by averaging each pixel with each of its neighboring pixels giving it an 'out of focus' appearance.

Diffuses the current image by replacing each pixel with a randomly selected neighboring pixel.

Computes all necessary parameters by analyzing the input data before actually performing the binarization. The algorithm is tuned to typical document images, consisting of dark text on brighter background. It is robust to shadows, noise and background images, this is disabled by default.

Automatically detects orientation and rotates so that the text is upright oriented, this is enabled by default.

Sets the minimum confidence percentage (0 to 100) used to control whether the rotation is applied, the default value is 40.

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

The HTML which will be inserted into the PDF document

Set where within the PDF provided, the HTML data should be inserted, the default value is Prepend.

Set a specific page location to insert the HTML data into.

Set page oprientation (Landscape or portrait).

Set the page size for the output PDF document, A4 is the default size.

Set the viewport used to render the HTML.

Set the top margin value (mm)

Set the bottom margin value (mm)

Set the right margin value (mm)

Set the left margin value (mm)

Set whether the data provided in the HTML Data field should be decoded.

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the source Microsoft Word file, the file extension is mandatory: 'file.docx' and not 'file'

The file content of the source Microsoft Word file

Set whether to accept or reject insertions

Set whether to accept or reject deletions

Set whether to accept or reject format changes

Set whether to accept or reject content movements

Set whether to remove comments

Change the thread culture used to process the request

The filename of the output PDF document

The filename of the file

The file content of the file

Set MS Office document comments and tracked changes removal option

Set PDF/A Compliance option

Set the PDF/A Compliance Level, the default value is PDF_A_2A.

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the output PDF document

The filename of the 1st source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the source file

The filename of the 2nd source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 2nd source file

The filename of the 3rd source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 3rd source file

The filename of the 4th source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 4th source file

The filename of the 5th source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 5th source file

The filename of the 6th source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 6th source file

The filename of the 7th source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 7th source file

The filename of the 8th source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 8th source file

The filename of the 9th source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 9th source file

The filename of the 10th source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the 10th source file

Set MS Office document comments and tracked changes removal option

Set PDF/A Compliance option

Set the PDF/A Compliance Level, the default value is PDF_A_2A.

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The filename of the output excel file

The format of the output excel file

The filename of the source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the source file

Set the sort position within the document array

Specify which worksheets from the source file should be included within the output

The filename of the output excel file

The format of the output excel file

The filename of the source file, the file extension is mandatory: 'file.xlsx' and not 'file'

The file content of the source file

Set the sort position for the document within the array, lowest number first

Specify which worksheets from the source file should be included within the output

Set whether to include the first row of the worksheet

Assure that the first row of the first workbook and sheet is always preserved

The format of the output presentation file

The filename of the output presentation file, set to 'presentation' by default

The filename of the source file, the file extension is mandatory: 'file.pptx' and not 'file'

The file content of the source file

Set the sort position within the document array

Specify which slides to include in the output

Apply the style of the first provided presentation to all other presentations, set to 'false' by default

The filename of the output DOCX document

The filename of the source file, the file extension is mandatory: 'file.docx' and not 'file'

The file content of the source file

Set the sort position within the document array

Set how formatting is handled when documents are merged into the first document in the array.

Set a specific time zone for date and time processing

The filename of the source PDF file, the file extension is mandatory: 'file.pdf' and not 'file'

The file content of the source PDF file

Select the language used for OCR processing

Select the OCR processing type, the 'Fast' option reduces processing time with possible minor loss of OCR accuracy - https://support.encodian.com/hc/en-gb/articles/360012686653-OCR-a-PDF-Document

Set PDF/A Compliance option

Set the PDF/A Compliance Level, the default value is PDF_A_2A.

Perform document clean-up operations, the default option will auto rotate, auto deskew and auto despeckle the document.

Automatically detects orientation and rotates it so that the text on it is upright oriented

Sets the minimum confidence percentage (0 to 100) used to control whether the rotation is applied, the default value is 60.

Detects the skew angle and rotates to remove that skew.

Automatically detects speckles and removes them.

This action analyzes a document and automatically adjusts brightness and contrast based on the analysis.

Locates border pixels and removes the pixels from the document,this is disabled by default.

This works only on color and grayscale documents. This operation smoothes background colors to eliminate or de-emphasize noise.

This only works on bitonal documents, it looks at groups of pixels, and finds isolated bumps and pits in the edges of those objects, and fills them in.

This action will remove shaded regions from bitonal documents.

Image Detergent works by changing pixels of similar color values to a central color value, which has the result of smoothing the image wherever regions of those colors appear.

Performs a 3x3 Average filter smoothing operation on the document, placing the output in the center of the window.

Detects and removes hole punch marks from a bitonal document.

Computes all necessary parameters by analyzing the input data before actually performing the binarization. The algorithm is tuned to typical document images, consisting of dark text on brighter background. It is robust to shadows, noise and background images.

Set whether blank pages should be removed from the PDF document.

Advanced - Set the identifier of a previous Encodian operation, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

Advanced - Return the processed file (File Contents) as opposed to just an Operation ID, please review before using - https://support.encodian.com/hc/en-gb/articles/360010509573-Flow-Action-Return-Options-File-Content-vs-Operation-ID

The file content of the source CSV file

Set the CSV delimiter, the default value is a comma: ','

Manually set the column headers for the CSV data (Column delimited: Column 1, Column 2, etc.

Skip the first line of the CSV file, set to 'Yes' if your CSV document contains column headers

The Microsoft Excel workbook (XLSX) to populate

The JSON data to populate the Microsoft Excel wookbook with

Sets the JSON parsing mode for simple values (null, boolean, number, integer, and string)

Automatically calculate formulas upon population

When enabled data is added to the workbook using corresponding Excel data types as opposed to a string data type

Sets the engine to allow missing values within the 'JSON Data'

Produces errors within the resultant workbook as opposed to rejecting the request with a HTTP 4** error

Sets the engine to automatically removes any empty paragraphs upon execution

Set one or more specfic formats for parsing DateTime values

Change the thread culture used to process the request

The Microsoft PowerPoint file (PPTX) to populate

The JSON data to populate the Microsoft PowerPoint file with

Sets the JSON parsing mode for simple values (null, boolean, number, integer, and string)

Sets the engine to allow missing values within the 'Document Data'

Produces errors within the resultant document as opposed to rejecting the request with a HTTP 4** error

Sets the engine to automatically removes any empty paragraphs upon execution

Set one or more specfic formats for parsing DateTime values

Change the thread culture used to process the request

The Microsoft Word Document (DOCX) to populate

The JSON data to populate the Microsoft Word Document with

Sets the JSON parsing mode for simple values (null, boolean, number, integer, and string)

Sets the engine to allow missing values within the 'Document Data'

Produces errors within the resultant document as opposed to rejecting the request with a HTTP 4** error

Sets the engine to automatically removes any empty paragraphs upon execution

Set one or more specfic formats for parsing DateTime values

Change the thread culture used to process the request

Set a specific time zone for date and time processing

Select the source document format.

The file content of the source file

Set the confidence level for barcode detection

Set the quality level for barcode detection

Set the page number to begin reading from

Set the page number to end reading on

Set whether recognised control characters should be removed

The file content of the source image file

Select the image format for the barcode image provided

Set the confidence level for barcode detection

Set whether recognised control characters should be removed

Select the source document format.

The file content of the source file

Set the confidence level for barcode detection

Set the page number to begin reading from

Set the page number to end reading on