EventLog Costruttori

Source:

EventLog.cs

Source:

EventLog.cs

Source:

EventLog.cs

public:
 EventLog();

public EventLog ();

Public Sub New ()

Esempio

Nell'esempio seguente viene creata l'origine MySource se non esiste già e scrive una voce nel registro MyNewLogeventi .

#using <System.dll>

using namespace System;
using namespace System::Diagnostics;
using namespace System::Threading;
int main()
{
   
   // Create the source, if it does not already exist.
   if (  !EventLog::SourceExists( "MySource" ) )
   {
      //An event log source should not be created and immediately used.
      //There is a latency time to enable the source, it should be created
      //prior to executing the application that uses the source.
      //Execute this sample a second time to use the new source.
      EventLog::CreateEventSource( "MySource", "MyNewLog" );
      Console::WriteLine( "CreatingEventSource" );
      // The source is created.  Exit the application to allow it to be registered.
      return 0;
   }

   
   // Create an EventLog instance and assign its source.
   EventLog^ myLog = gcnew EventLog;
   myLog->Source = "MySource";
   
   // Write an informational entry to the event log.    
   myLog->WriteEntry( "Writing to event log." );
}

using System;
using System.Diagnostics;
using System.Threading;

class MySample{

    public static void Main(){

        // Create the source, if it does not already exist.
        if(!EventLog.SourceExists("MySource"))
        {
             //An event log source should not be created and immediately used.
             //There is a latency time to enable the source, it should be created
             //prior to executing the application that uses the source.
             //Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog");
            Console.WriteLine("CreatedEventSource");
            Console.WriteLine("Exiting, execute the application a second time to use the source.");
            // The source is created.  Exit the application to allow it to be registered.
            return;
        }

        // Create an EventLog instance and assign its source.
        EventLog myLog = new EventLog();
        myLog.Source = "MySource";

        // Write an informational entry to the event log.
        myLog.WriteEntry("Writing to event log.");
    }
}

Option Explicit
Option Strict

Imports System.Diagnostics
Imports System.Threading

Class MySample
    Public Shared Sub Main()
        
        If Not EventLog.SourceExists("MySource") Then
            ' Create the source, if it does not already exist.
            ' An event log source should not be created and immediately used.
            ' There is a latency time to enable the source, it should be created
            ' prior to executing the application that uses the source.
            ' Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog")
            Console.WriteLine("CreatingEventSource")
            'The source is created.  Exit the application to allow it to be registered.
            Return
        End If
        
        ' Create an EventLog instance and assign its source.
        Dim myLog As New EventLog()
        myLog.Source = "MySource"
        
        ' Write an informational entry to the event log.    
        myLog.WriteEntry("Writing to event log.")
    End Sub
End Class

Commenti

Prima di chiamare WriteEntry, specificare la Source proprietà dell'istanza EventLog . Se si legge Entries solo dal log, è possibile specificare in alternativa solo le Log proprietà e MachineName .

Nella tabella seguente vengono illustrati i valori delle proprietà iniziali per un'istanza di EventLog.

Vedi anche

• Source
• Log
• MachineName
• Entries
• WriteEntry
• WriteEvent
• EventLogEntry

Source:

EventLog.cs

Source:

EventLog.cs

Source:

EventLog.cs

public:
 EventLog(System::String ^ logName);

public EventLog (string logName);

new System.Diagnostics.EventLog : string -> System.Diagnostics.EventLog

Public Sub New (logName As String)

Parametri

Eccezioni

Esempio

L'esempio seguente legge le voci nel registro eventi"myNewLog" nel computer locale.

#using <System.dll>

using namespace System;
using namespace System::Diagnostics;
using namespace System::Threading;
int main()
{
    // Create the source, if it does not already exist.
   if (  !EventLog::SourceExists( "MySource" ) )
   {
      //An event log source should not be created and immediately used.
      //There is a latency time to enable the source, it should be created
      //prior to executing the application that uses the source.
      //Execute this sample a second time to use the new source.
      EventLog::CreateEventSource( "MySource", "MyNewLog" );
      Console::WriteLine( "CreatingEventSource" );
      // The source is created.  Exit the application to allow it to be registered.
      return 0;
   }

   
   // Create an EventLog instance and assign its log name.
   EventLog^ myLog = gcnew EventLog( "myNewLog" );
   
   // Read the event log entries.
   System::Collections::IEnumerator^ myEnum = myLog->Entries->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      EventLogEntry^ entry = safe_cast<EventLogEntry^>(myEnum->Current);
      Console::WriteLine( "\tEntry: {0}", entry->Message );
   }
}

using System;
using System.Diagnostics;
using System.Threading;

class MySample
{
    public static void Main()
    {
        // Create the source, if it does not already exist.
        if (!EventLog.SourceExists("MySource"))
        {
            //An event log source should not be created and immediately used.
            //There is a latency time to enable the source, it should be created
            //prior to executing the application that uses the source.
            //Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog");
            Console.WriteLine("CreatedEventSource");
            Console.WriteLine("Exiting, execute the application a second time to use the source.");
            // The source is created.  Exit the application to allow it to be registered.
            return;
        }

        // Create an EventLog instance and assign its log name.
        EventLog myLog = new EventLog("myNewLog");

        // Read the event log entries.
        foreach (EventLogEntry entry in myLog.Entries)
        {
            Console.WriteLine("\tEntry: " + entry.Message);
        }
    }
}

Option Explicit
Option Strict

Imports System.Diagnostics
Imports System.Threading

Class MySample
    Public Shared Sub Main()
        
        If Not EventLog.SourceExists("MySource") Then
            ' Create the source, if it does not already exist.
            ' An event log source should not be created and immediately used.
            ' There is a latency time to enable the source, it should be created
            ' prior to executing the application that uses the source.
            ' Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog")
            Console.WriteLine("CreatingEventSource")
            'The source is created.  Exit the application to allow it to be registered.
            Return
        End If

        Dim myLog As New EventLog("myNewLog")
        
        ' Read the event log entries.
        Dim entry As EventLogEntry
        For Each entry In  myLog.Entries
            Console.WriteLine((ControlChars.Tab & "Entry: " & entry.Message))
        Next entry
    End Sub
End Class

Commenti

Questo overload imposta la proprietà sul LoglogName parametro. Prima di chiamare WriteEntry, specificare la Source proprietà dell'istanza EventLog . Se si legge Entries solo dal log, è possibile specificare in alternativa solo le Log proprietà e MachineName .

Se l'origine Source specificata nella proprietà è univoca da altre origini nel computer, una chiamata successiva per WriteEntry creare un log con il nome specificato, se non esiste già.

Nella tabella seguente vengono illustrati i valori delle proprietà iniziali per un'istanza di EventLog.

Vedi anche

• Source
• Log
• MachineName
• Entries
• WriteEntry
• WriteEvent
• EventLogEntry

Source:

EventLog.cs

Source:

EventLog.cs

Source:

EventLog.cs

public:
 EventLog(System::String ^ logName, System::String ^ machineName);

public EventLog (string logName, string machineName);

new System.Diagnostics.EventLog : string * string -> System.Diagnostics.EventLog

Public Sub New (logName As String, machineName As String)

Parametri

Eccezioni

Esempio

L'esempio seguente legge le voci nel registro eventi "myNewLog", nel computer "myServer".

#using <System.dll>

using namespace System;
using namespace System::Diagnostics;
using namespace System::Threading;
int main()
{
   // Create the source, if it does not already exist.
   if (  !EventLog::SourceExists( "MySource" ) )
   {
      //An event log source should not be created and immediately used.
      //There is a latency time to enable the source, it should be created
      //prior to executing the application that uses the source.
      //Execute this sample a second time to use the new source.
      EventLog::CreateEventSource( "MySource", "MyNewLog", "myServer" );
      Console::WriteLine( "CreatingEventSource" );
      // The source is created.  Exit the application to allow it to be registered.
      return 0;
   }

   // Create an EventLog instance and assign its log name.
   EventLog^ myLog = gcnew EventLog( "myNewLog","myServer" );
   
   // Read the event log entries.
   System::Collections::IEnumerator^ myEnum = myLog->Entries->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      EventLogEntry^ entry = safe_cast<EventLogEntry^>(myEnum->Current);
      Console::WriteLine( "\tEntry: {0}", entry->Message );
   }
}

using System;
using System.Diagnostics;
using System.Threading;

class MySample1
{
    public static void Main()
    {
        // Create the source, if it does not already exist.
        if (!EventLog.SourceExists("MySource"))
        {
            //An event log source should not be created and immediately used.
            //There is a latency time to enable the source, it should be created
            //prior to executing the application that uses the source.
            //Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog", "myServer");
            Console.WriteLine("CreatedEventSource");
            Console.WriteLine("Exiting, execute the application a second time to use the source.");
            // The source is created.  Exit the application to allow it to be registered.
            return;
        }
        // Create an EventLog instance and assign its log name.
        EventLog myLog = new EventLog("myNewLog", "myServer");

        // Read the event log entries.
        foreach (EventLogEntry entry in myLog.Entries)
        {
            Console.WriteLine("\tEntry: " + entry.Message);
        }
    }
}

Option Explicit
Option Strict

Imports System.Diagnostics
Imports System.Threading

Class MySample
    Public Shared Sub Main()
        If Not EventLog.SourceExists("MySource") Then
            ' Create the source, if it does not already exist.
            ' An event log source should not be created and immediately used.
            ' There is a latency time to enable the source, it should be created
            ' prior to executing the application that uses the source.
            ' Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog", "myServer")
            Console.WriteLine("CreatingEventSource")
            'The source is created.  Exit the application to allow it to be registered.
            Return
        End If

        ' Create an EventLog instance and assign its log name.
        Dim myLog As New EventLog("myNewLog", "myServer")
        
        ' Read the event log entries.
        Dim entry As EventLogEntry
        For Each entry In  myLog.Entries
            Console.WriteLine((ControlChars.Tab & "Entry: " & entry.Message))
        Next entry
    End Sub
End Class

Commenti

Questo overload imposta la Log proprietà sul logName parametro e la MachineName proprietà sul machineName parametro. Prima di chiamare WriteEntry, specificare la Source proprietà dell'oggetto EventLog. Se si legge Entries solo dal log, è possibile specificare in alternativa solo le Log proprietà e MachineName .

Nella tabella seguente vengono illustrati i valori delle proprietà iniziali per un'istanza di EventLog.

Vedi anche

• Source
• Log
• MachineName
• Entries
• WriteEntry
• WriteEvent
• EventLogEntry

Source:

EventLog.cs

Source:

EventLog.cs

Source:

EventLog.cs

public:
 EventLog(System::String ^ logName, System::String ^ machineName, System::String ^ source);

public EventLog (string logName, string machineName, string source);

new System.Diagnostics.EventLog : string * string * string -> System.Diagnostics.EventLog

Public Sub New (logName As String, machineName As String, source As String)

Parametri

Eccezioni

Esempio

L'esempio seguente scrive una voce in un registro eventi, "MyNewLog", nel computer locale usando l'origine "MySource".

#using <System.dll>

using namespace System;
using namespace System::Diagnostics;
using namespace System::Threading;
int main()
{
   // Create the source, if it does not already exist.
   if (  !EventLog::SourceExists( "MySource" ) )
   {
      //An event log source should not be created and immediately used.
      //There is a latency time to enable the source, it should be created
      //prior to executing the application that uses the source.
      //Execute this sample a second time to use the new source.
      EventLog::CreateEventSource( "MySource", "MyNewLog");
      Console::WriteLine( "CreatingEventSource" );
      // The source is created.  Exit the application to allow it to be registered.
      return 0;
   }
   
   // Create an EventLog instance and assign its source.
   EventLog^ myLog = gcnew EventLog( "myNewLog",".","MySource" );
   
   // Write an entry to the log.        
   myLog->WriteEntry( String::Format( "Writing to event log on {0}", myLog->MachineName ) );
}

using System;
using System.Diagnostics;
using System.Threading;

class MySample2
{
    public static void Main()
    {
        // Create the source, if it does not already exist.
        if (!EventLog.SourceExists("MySource"))
        {
            //An event log source should not be created and immediately used.
            //There is a latency time to enable the source, it should be created
            //prior to executing the application that uses the source.
            //Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog");
            Console.WriteLine("CreatedEventSource");
            Console.WriteLine("Exiting, execute the application a second time to use the source.");
            // The source is created.  Exit the application to allow it to be registered.
            return;
        }
        // Create an EventLog instance and assign its source.
        EventLog myLog = new EventLog("myNewLog", ".", "MySource");

        // Write an entry to the log.
        myLog.WriteEntry("Writing to event log on " + myLog.MachineName);
    }
}

Option Strict
Option Explicit

Imports System.Diagnostics
Imports System.Threading

Class MySample
    Public Shared Sub Main()
        If Not EventLog.SourceExists("MySource") Then
            ' Create the source, if it does not already exist.
            ' An event log source should not be created and immediately used.
            ' There is a latency time to enable the source, it should be created
            ' prior to executing the application that uses the source.
            ' Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog")
            Console.WriteLine("CreatingEventSource")
            'The source is created.  Exit the application to allow it to be registered.
            Return
        End If
        ' Create an EventLog instance and assign its source.
        Dim myLog As New EventLog("myNewLog", ".", "MySource")
        
        ' Write an entry to the log.        
        myLog.WriteEntry(("Writing to event log on " & myLog.MachineName))
    End Sub
End Class

Commenti

Questo costruttore imposta la Log proprietà sul parametro, la MachineName proprietà logNamemachineName sul parametro e la Source proprietà sul source parametro. La Source proprietà è necessaria durante la scrittura in un registro eventi. Tuttavia, se si legge solo da un registro eventi, sono necessarie solo le Log proprietà e MachineName , purché il log eventi nel server abbia già associato un'origine. Se si legge solo dal registro eventi, potrebbe essere sufficiente un altro overload del costruttore.

Nella tabella seguente vengono illustrati i valori delle proprietà iniziali per un'istanza di EventLog.

Vedi anche

• Source
• Log
• MachineName
• Entries
• WriteEntry
• WriteEvent
• EventLogEntry