Application.UserAppDataPath Proprietà

public:
 static property System::String ^ UserAppDataPath { System::String ^ get(); };

public static string UserAppDataPath { get; }

static member UserAppDataPath : string

Public Shared ReadOnly Property UserAppDataPath As String

Valore della proprietà

Percorso relativo ai dati dell'applicazione di un utente.

Esempio

Nell'esempio di codice seguente vengono visualizzati due moduli e viene chiusa l'applicazione quando entrambe le forme vengono chiuse. All'avvio e all'uscita dell'applicazione, viene ricordata la posizione di ogni modulo. Questo esempio illustra l'uso della proprietà per archiviare i UserAppDataPath dati dell'applicazione per l'utente.

La classe MyApplicationContext eredita da ApplicationContext e mantiene traccia quando ogni modulo viene chiuso e chiude il thread corrente quando entrambi sono. La classe archivia le posizioni di ogni modulo per l'utente. I dati di posizione del modulo vengono archiviati in un file denominato Appdata.txt creato nella posizione determinata da UserAppDataPath. Il Main metodo chiama Application.Run(context) per avviare l'applicazione in base a ApplicationContext.

Questo codice è un estratto dell'esempio illustrato nella panoramica della ApplicationContext classe. Alcuni codici non vengono visualizzati allo scopo di brevità. Vedere ApplicationContext per l'intero elenco di codice.

   MyApplicationContext()
   {
      _formCount = 0;
      
      // Handle the ApplicationExit event to know when the application is exiting.
      Application::ApplicationExit += gcnew EventHandler( this, &MyApplicationContext::OnApplicationExit );
      try
      {
         
         // Create a file that the application will store user specific data in.
         _userData = gcnew FileStream( String::Concat( Application::UserAppDataPath, "\\appdata.txt" ),FileMode::OpenOrCreate );
      }
      catch ( IOException^ e ) 
      {
         
         // Inform the user that an error occurred.
         MessageBox::Show( "An error occurred while attempting to show the application. The error is: {0}", dynamic_cast<String^>(e) );
         
         // Exit the current thread instead of showing the windows.
         ExitThread();
      }

      
      // Create both application forms and handle the Closed event
      // to know when both forms are closed.
      _form1 = gcnew AppForm1;
      _form1->Closed += gcnew EventHandler( this, &MyApplicationContext::OnFormClosed );
      _form1->Closing += gcnew CancelEventHandler( this, &MyApplicationContext::OnFormClosing );
      _formCount++;
      _form2 = gcnew AppForm2;
      _form2->Closed += gcnew EventHandler( this, &MyApplicationContext::OnFormClosed );
      _form2->Closing += gcnew CancelEventHandler( this, &MyApplicationContext::OnFormClosing );
      _formCount++;
      
      // Get the form positions based upon the user specific data.
      if ( ReadFormDataFromFile() )
      {
         
         // If the data was read from the file, set the form
         // positions manually.
         _form1->StartPosition = FormStartPosition::Manual;
         _form2->StartPosition = FormStartPosition::Manual;
         _form1->Bounds = _form1Position;
         _form2->Bounds = _form2Position;
      }

      
      // Show both forms.
      _form1->Show();
      _form2->Show();
   }

   void OnApplicationExit( Object^ /*sender*/, EventArgs^ /*e*/ )
   {
      
      // When the application is exiting, write the application data to the
      // user file and close it.
      WriteFormDataToFile();
      try
      {
         
         // Ignore any errors that might occur while closing the file handle.
         _userData->Close();
      }
      catch ( Exception^ ) 
      {
      }

   }

private:

private MyApplicationContext()
{
    _formCount = 0;

    // Handle the ApplicationExit event to know when the application is exiting.
    Application.ApplicationExit += new EventHandler(this.OnApplicationExit);

    try
    {
        // Create a file that the application will store user specific data in.
        _userData = new FileStream(Application.UserAppDataPath + "\\appdata.txt", FileMode.OpenOrCreate);
    }
    catch (IOException e)
    {
        // Inform the user that an error occurred.
        MessageBox.Show("An error occurred while attempting to show the application." +
                        "The error is:" + e.ToString());

        // Exit the current thread instead of showing the windows.
        ExitThread();
    }

    // Create both application forms and handle the Closed event
    // to know when both forms are closed.
    _form1 = new AppForm1();
    _form1.Closed += new EventHandler(OnFormClosed);
    _form1.Closing += new CancelEventHandler(OnFormClosing);
    _formCount++;

    _form2 = new AppForm2();
    _form2.Closed += new EventHandler(OnFormClosed);
    _form2.Closing += new CancelEventHandler(OnFormClosing);
    _formCount++;

    // Get the form positions based upon the user specific data.
    if (ReadFormDataFromFile())
    {
        // If the data was read from the file, set the form
        // positions manually.
        _form1.StartPosition = FormStartPosition.Manual;
        _form2.StartPosition = FormStartPosition.Manual;

        _form1.Bounds = _form1Position;
        _form2.Bounds = _form2Position;
    }

    // Show both forms.
    _form1.Show();
    _form2.Show();
}

private void OnApplicationExit(object sender, EventArgs e)
{
    // When the application is exiting, write the application data to the
    // user file and close it.
    WriteFormDataToFile();

    try
    {
        // Ignore any errors that might occur while closing the file handle.
        _userData.Close();
    }
    catch { }
}

Public Sub New()
    MyBase.New()
    _formCount = 0

    ' Handle the ApplicationExit event to know when the application is exiting.
    AddHandler Application.ApplicationExit, AddressOf OnApplicationExit

    Try
        ' Create a file that the application will store user specific data in.
        _userData = New FileStream(Application.UserAppDataPath + "\appdata.txt", FileMode.OpenOrCreate)

    Catch e As IOException
        ' Inform the user that an error occurred.
        MessageBox.Show("An error occurred while attempting to show the application." +
                        "The error is:" + e.ToString())

        ' Exit the current thread instead of showing the windows.
        ExitThread()
    End Try

    ' Create both application forms and handle the Closed event
    ' to know when both forms are closed.
    _form1 = New AppForm1()
    AddHandler _form1.Closed, AddressOf OnFormClosed
    AddHandler _form1.Closing, AddressOf OnFormClosing
    _formCount = _formCount + 1

    _form2 = New AppForm2()
    AddHandler _form2.Closed, AddressOf OnFormClosed
    AddHandler _form2.Closing, AddressOf OnFormClosing
    _formCount = _formCount + 1

    ' Get the form positions based upon the user specific data.
    If (ReadFormDataFromFile()) Then
        ' If the data was read from the file, set the form
        ' positions manually.
        _form1.StartPosition = FormStartPosition.Manual
        _form2.StartPosition = FormStartPosition.Manual

        _form1.Bounds = _form1Position
        _form2.Bounds = _form2Position
    End If

    ' Show both forms.
    _form1.Show()
    _form2.Show()
End Sub

Private Sub OnApplicationExit(ByVal sender As Object, ByVal e As EventArgs)
    ' When the application is exiting, write the application data to the
    ' user file and close it.
    WriteFormDataToFile()

    Try
        ' Ignore any errors that might occur while closing the file handle.
        _userData.Close()
    Catch
    End Try
End Sub

Commenti

Se un percorso non esiste, ne viene creato uno nel formato seguente:

Percorso di base\CompanyName\ProductName\ProductVersion

I dati archiviati in questo percorso fanno parte del profilo utente abilitato per il roaming. Un utente roaming funziona su più computer in una rete. Il profilo utente per un utente roaming viene mantenuto in un server nella rete e viene caricato in un sistema quando l'utente accede. Per considerare un profilo utente per il roaming, il sistema operativo deve supportare i profili mobili e deve essere abilitato.

Un percorso di base tipico è C:\Documents e Settings\username\Application Data. Questo percorso sarà diverso, tuttavia, se l'applicazione Windows Forms viene distribuita usando ClickOnce. ClickOnce crea la propria directory dati dell'applicazione isolata da tutte le altre applicazioni. Per altre informazioni, vedere Accesso ai dati locali e remoti nelle applicazioni ClickOnce.

Si applica a

Vedi anche

• UserAppDataRegistry