Connected Standby Hardware Security Test

  • Articolo

This test queries the Windows Hardware Security Testability Interface. It also scans for hardware that permits unauthenticated DMA access.

Test details

Associated requirements

System.Fundamentals.Firmware.CS.UEFISecureBoot.ConnectedStandby System.Fundamentals.Firmware.CS.UEFISecureBoot.Provisioning

See the system hardware requirements.

Platforms

Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2

Expected run time

~10 minutes

Categories

Certification

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: WDTF System Fundamentals Testing Prerequisites.

Troubleshooting

This test returns Pass or Fail. To review test details, review the test log from Windows Hardware Certification Kit (Windows HCK) Studio. If this test fails because of insecure DMA detection, please contact Microsoft to request a review process to understand the implications of this failure.

For troubleshooting information, see Troubleshooting System Fundamentals Testing.

System.Fundamentals Tests

 

 

Send comments about this topic to Microsoft