Need a Few Processors?

  • [アーティクル]

Referring back to my post on hyperthreading, I had to remove quite a few procs to get the correct number of physical processors and logical processors for a customer test.

Unfortunately, I have found that using a "numprocs" boot.ini switch doesn't suffice for testing the correct number.

For example, we have a customer that would like to test on a couple of our 4-way servers (because it is what they have in production). However, they wanted two physical, hyperthreaded processors. If I left all four physical processors in the box, and rebooted using a numprocs=2 boot.ini switch, only two processors would show up (two physical, not hyperthreaded). Therefore, I had to physically remove 2 of the four processors in order to get the combination they wanted.

 
Click on the image for a larger view

- Marcus

Contact your TAM, ADC, MCS Consultant or other Microsoft Representative to find out how you can use our facilities