New-AzFirewall

Creates a new Firewall in a resource group.

Syntax

New-AzFirewall
   -Name <String>
   -ResourceGroupName <String>
   -Location <String>
   [-PublicIpAddress <PSPublicIpAddress[]>]
   [-ApplicationRuleCollection <PSAzureFirewallApplicationRuleCollection[]>]
   [-NatRuleCollection <PSAzureFirewallNatRuleCollection[]>]
   [-NetworkRuleCollection <PSAzureFirewallNetworkRuleCollection[]>]
   [-ThreatIntelMode <String>]
   [-ThreatIntelWhitelist <PSAzureFirewallThreatIntelWhitelist>]
   [-PrivateRange <String[]>]
   [-EnableDnsProxy]
   [-DnsServer <String[]>]
   [-Tag <Hashtable>]
   [-Force]
   [-AsJob]
   [-Zone <String[]>]
   [-SkuName <String>]
   [-SkuTier <String>]
   [-VirtualHubId <String>]
   [-HubIPAddress <PSAzureFirewallHubIpAddresses>]
   [-FirewallPolicyId <String>]
   [-AllowActiveFTP]
   [-EnableFatFlowLogging]
   [-EnableUDPLogOptimization]
   [-RouteServerId <String>]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
New-AzFirewall
   -Name <String>
   -ResourceGroupName <String>
   -Location <String>
   -VirtualNetworkName <String>
   [-PublicIpName <String>]
   [-PublicIpAddress <PSPublicIpAddress[]>]
   [-ApplicationRuleCollection <PSAzureFirewallApplicationRuleCollection[]>]
   [-NatRuleCollection <PSAzureFirewallNatRuleCollection[]>]
   [-NetworkRuleCollection <PSAzureFirewallNetworkRuleCollection[]>]
   [-ThreatIntelMode <String>]
   [-ThreatIntelWhitelist <PSAzureFirewallThreatIntelWhitelist>]
   [-PrivateRange <String[]>]
   [-EnableDnsProxy]
   [-DnsServer <String[]>]
   [-Tag <Hashtable>]
   [-Force]
   [-AsJob]
   [-Zone <String[]>]
   [-SkuName <String>]
   [-SkuTier <String>]
   [-VirtualHubId <String>]
   [-HubIPAddress <PSAzureFirewallHubIpAddresses>]
   [-FirewallPolicyId <String>]
   [-AllowActiveFTP]
   [-EnableFatFlowLogging]
   [-EnableUDPLogOptimization]
   [-RouteServerId <String>]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
New-AzFirewall
   -Name <String>
   -ResourceGroupName <String>
   -Location <String>
   -VirtualNetwork <PSVirtualNetwork>
   [-PublicIpAddress <PSPublicIpAddress[]>]
   [-ManagementPublicIpAddress <PSPublicIpAddress>]
   [-ApplicationRuleCollection <PSAzureFirewallApplicationRuleCollection[]>]
   [-NatRuleCollection <PSAzureFirewallNatRuleCollection[]>]
   [-NetworkRuleCollection <PSAzureFirewallNetworkRuleCollection[]>]
   [-ThreatIntelMode <String>]
   [-ThreatIntelWhitelist <PSAzureFirewallThreatIntelWhitelist>]
   [-PrivateRange <String[]>]
   [-EnableDnsProxy]
   [-DnsServer <String[]>]
   [-Tag <Hashtable>]
   [-Force]
   [-AsJob]
   [-Zone <String[]>]
   [-SkuName <String>]
   [-SkuTier <String>]
   [-VirtualHubId <String>]
   [-HubIPAddress <PSAzureFirewallHubIpAddresses>]
   [-FirewallPolicyId <String>]
   [-AllowActiveFTP]
   [-EnableFatFlowLogging]
   [-EnableUDPLogOptimization]
   [-RouteServerId <String>]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The New-AzFirewall cmdlet creates an Azure Firewall.

Examples

Example 1: Create a Firewall attached to a virtual network

$rgName = "resourceGroupName"
$vnet = Get-AzVirtualNetwork -ResourceGroupName $rgName -Name "vnet"
$pip = Get-AzPublicIpAddress -ResourceGroupName $rgName -Name "publicIpName"
New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -VirtualNetwork $vnet -PublicIpAddress $pip

This example creates a Firewall attached to virtual network "vnet" in the same resource group as the firewall. Since no rules were specified, the firewall will block all traffic (default behavior). Threat Intel will also run in default mode - Alert - which means malicious traffic will be logged, but not denied.

Example 2: Create a Firewall which allows all HTTPS traffic

$rgName = "resourceGroupName"
$vnet = Get-AzVirtualNetwork -ResourceGroupName $rgName -Name "vnet"
$pip = Get-AzPublicIpAddress -ResourceGroupName $rgName -Name "publicIpName"

$rule = New-AzFirewallApplicationRule -Name R1 -Protocol "https:443" -TargetFqdn "*" 
$ruleCollection = New-AzFirewallApplicationRuleCollection -Name RC1 -Priority 100 -Rule $rule -ActionType "Allow"
New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -VirtualNetwork $vnet -PublicIpAddress $pip -ApplicationRuleCollection $ruleCollection

This example creates a Firewall which allows all HTTPS traffic on port 443. Threat Intel will run in default mode - Alert - which means malicious traffic will be logged, but not denied.

Example 3: DNAT - redirect traffic destined to 10.1.2.3:80 to 10.2.3.4:8080

$rule = New-AzFirewallNatRule -Name "natRule" -Protocol "TCP" -SourceAddress "*" -DestinationAddress "10.1.2.3" -DestinationPort "80" -TranslatedAddress "10.2.3.4" -TranslatedPort "8080"
$ruleCollection = New-AzFirewallNatRuleCollection -Name "NatRuleCollection" -Priority 1000 -Rule $rule
New-AzFirewall -Name "azFw" -ResourceGroupName "rg" -Location centralus -NatRuleCollection $ruleCollection -ThreatIntelMode Off

This example created a Firewall which translated the destination IP and port of all packets destined to 10.1.2.3:80 to 10.2.3.4:8080 Threat Intel is turned off in this example.

Example 4: Create a Firewall with no rules and with Threat Intel in Alert mode

$rgName = "resourceGroupName"
$vnet = Get-AzVirtualNetwork -ResourceGroupName $rgName -Name "vnet"
$pip = Get-AzPublicIpAddress -ResourceGroupName $rgName -Name "publicIpName"
New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -VirtualNetwork $vnet -PublicIpAddress $pip -ThreatIntelMode Alert

This example creates a Firewall which blocks all traffic (default behavior) and has Threat Intel running in Alert mode. This means alerting logs are emitted for malicious traffic before applying the other rules (in this case just the default rule - Deny All)

Example 5: Create a Firewall which allows all HTTP traffic on port 8080, but blocks malicious domains identified by Threat Intel

$rgName = "resourceGroupName"
$vnet = Get-AzVirtualNetwork -ResourceGroupName $rgName -Name "vnet"
$pip = Get-AzPublicIpAddress -ResourceGroupName $rgName -Name "publicIpName"

$rule = New-AzFirewallApplicationRule -Name R1 -Protocol "http:8080" -TargetFqdn "*" 
$ruleCollection = New-AzFirewallApplicationRuleCollection -Name RC1 -Priority 100 -Rule $rule -ActionType "Allow"
New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -VirtualNetwork $vnet -PublicIpAddress $pip -ApplicationRuleCollection $ruleCollection -ThreatIntelMode Deny

This example creates a Firewall which allows all HTTP traffic on port 8080 unless it is considered malicious by Threat Intel. When running in Deny mode, unlike Alert, traffic considered malicious by Threat Intel is not just logged, but also blocked.

Example 6: Create a Firewall with no rules and with availability zones

$rgName = "resourceGroupName"
$vnet = Get-AzVirtualNetwork -ResourceGroupName $rgName -Name "vnet"
$pip = Get-AzPublicIpAddress -ResourceGroupName $rgName -Name "publicIpName"
New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -VirtualNetworkName $vnet.Name -PublicIpName $pip.Name -Zone 1,2,3

This example creates a Firewall with all available availability zones.

Example 7: Create a Firewall with two or more Public IP Addresses

$rgName = "resourceGroupName"
$vnet = Get-AzVirtualNetwork -Name "vnet" -ResourceGroupName $rgName
$pip1 = New-AzPublicIpAddress -Name "AzFwPublicIp1" -ResourceGroupName "rg" -Sku "Basic" -Tier "Regional" -Location "centralus" -AllocationMethod Static
$pip2 = New-AzPublicIpAddress -Name "AzFwPublicIp2" -ResourceGroupName "rg" -Sku "Basic" -Tier "Regional" -Location "centralus" -AllocationMethod Static
New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -VirtualNetwork $vnet -PublicIpAddress @($pip1, $pip2)

This example creates a Firewall attached to virtual network "vnet" with two public IP addresses.

Example 8: Create a Firewall which allows MSSQL traffic to specific SQL database

$rgName = "resourceGroupName"
$vnet = Get-AzVirtualNetwork -ResourceGroupName $rgName -Name "vnet"
$pip = Get-AzPublicIpAddress -ResourceGroupName $rgName -Name "publicIpName"

$rule = New-AzFirewallApplicationRule -Name R1 -Protocol "mssql:1433" -TargetFqdn "sql1.database.windows.net"
$ruleCollection = New-AzFirewallApplicationRuleCollection -Name RC1 -Priority 100 -Rule $rule -ActionType "Allow"
New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -VirtualNetwork $vnet -PublicIpAddress $pip -ApplicationRuleCollection $ruleCollection -ThreatIntelMode Deny

This example creates a Firewall which allows MSSQL traffic on standard port 1433 to SQL database sql1.database.windows.net.

Example 9: Create a Firewall attached to a virtual hub

$rgName = "resourceGroupName"
$fp = Get-AzFirewallPolicy -ResourceGroupName $rgName -Name "fp"
$fpId = $fp.Id
$vHub = Get-AzVirtualHub -Name "hub"
$vHubId = $vHub.Id

New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -SkuName AZFW_Hub -VirtualHubId $vHubId -FirewallPolicyId -$fpId

This example creates a Firewall attached to virtual hub "vHub". A firewall policy $fp will be attached to the firewall. This firewall allows/denies the traffic based on the rules mentioned in the firewall policy $fp. The virtual hub and the firewall should be in the same regions.

Example 10: Create a Firewall with threat intelligence allowlist setup

$rgName = "resourceGroupName"
$vnet = Get-AzVirtualNetwork -ResourceGroupName $rgName -Name "vnet"
$pip = Get-AzPublicIpAddress -ResourceGroupName $rgName -Name "publicIpName"

$tiWhitelist = New-AzFirewallThreatIntelWhitelist -FQDN @("www.microsoft.com") -IpAddress @("8.8.8.8")
New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -VirtualNetwork $vnet -PublicIpAddress $pip -ThreatIntelWhitelist $tiWhitelist

This example creates a Firewall that allowlists "www.microsoft.com" and "8.8.8.8" from threat intelligence

Example 11: Create a Firewall with customized private range setup

$rgName = "resourceGroupName"
$vnet = Get-AzVirtualNetwork -ResourceGroupName $rgName -Name "vnet"
$pip = Get-AzPublicIpAddress -ResourceGroupName $rgName -Name "publicIpName"

New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -VirtualNetwork $vnet -PublicIpAddress $pip -PrivateRange @("99.99.99.0/24", "66.66.0.0/16")

This example creates a Firewall that treats "99.99.99.0/24" and "66.66.0.0/16" as private ip ranges and won't snat traffic to those addresses

Example 12: Create a Firewall with a management subnet and Public IP address

$rgName = "resourceGroupName"
$vnet = Get-AzVirtualNetwork -ResourceGroupName $rgName -Name "vnet"
$pip = Get-AzPublicIpAddress -ResourceGroupName $rgName -Name "publicIpName"
$mgmtPip = Get-AzPublicIpAddress -ResourceGroupName $rgName -Name "managementPublicIpName"

New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -VirtualNetwork $vnet -PublicIpAddress $pip -ManagementPublicIpAddress $mgmtPip

This example creates a Firewall attached to virtual network "vnet" in the same resource group as the firewall. Since no rules were specified, the firewall will block all traffic (default behavior). Threat Intel will also run in default mode - Alert - which means malicious traffic will be logged, but not denied.

To support "forced tunneling" scenarios, this firewall will use the subnet "AzureFirewallManagementSubnet" and the management public IP address for its management traffic

Example 13: Create a Firewall with Firewall Policy attached to a virtual network

$rgName = "resourceGroupName"
$vnet = Get-AzVirtualNetwork -ResourceGroupName $rgName -Name "vnet"
$pip = Get-AzPublicIpAddress -ResourceGroupName $rgName -Name "publicIpName"
$fp = Get-AzFirewallPolicy -ResourceGroupName $rgName -Name "fp"
New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -VirtualNetwork $vnet -PublicIpAddress $pip -FirewallPolicyId $fp

This example creates a Firewall attached to virtual network "vnet" in the same resource group as the firewall. The rules and threat intelligence that will be applied to the firewall will be taken from the firewall policy

Example 14: Create a Firewall with DNS Proxy and DNS Servers

$rgName = "resourceGroupName"
$vnet = Get-AzVirtualNetwork -ResourceGroupName $rgName -Name "vnet"
$pip = Get-AzPublicIpAddress -ResourceGroupName $rgName -Name "publicIpName"
New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -VirtualNetwork $vnet -PublicIpAddress $pip -DnsServer @("10.10.10.1", "20.20.20.2")

This example creates a Firewall attached to virtual network "vnet" in the same resource group as the firewall. DNS Proxy is enabled for this firewall and 2 DNS Servers are provided. Also Require DNS Proxy for Network rules is set so if there are any Network rules with FQDNs then DNS proxy will be used for them too.

Example 15: Create a Firewall with multiple IPs. The Firewall can be associated with the Virtual Hub

$rgName = "resourceGroupName"
$vHub = Get-AzVirtualHub -Name "hub"
$vHubId = $vHub.Id
$fwpips = New-AzFirewallHubPublicIpAddress -Count 2
$hubIpAddresses = New-AzFirewallHubIpAddress -PublicIP $fwpips
$fw=New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location westus -SkuName AZFW_Hub -HubIPAddress $hubIpAddresses -VirtualHubId $vHubId

This example creates a Firewall attached to virtual hub "hub" in the same resource group as the firewall. The Firewall will be assigned 2 public IPs that are created implicitly.

Example 16: Create a Firewall with Allow Active FTP.

$rgName = "resourceGroupName"
$vnet = Get-AzVirtualNetwork -ResourceGroupName $rgName -Name "vnet"
$pip = Get-AzPublicIpAddress -ResourceGroupName $rgName -Name "publicIpName"
New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -VirtualNetwork $vnet -PublicIpAddress $pip -AllowActiveFTP

This example creates a Firewall with allow active FTP flag.

Example 17: Create a Firewall with a management subnet and no data Public IP address

$rgName = "resourceGroupName"
$vnet = Get-AzVirtualNetwork -ResourceGroupName $rgName -Name "vnet"
$mgmtPip = Get-AzPublicIpAddress -ResourceGroupName $rgName -Name "managementPublicIpName"

New-AzFirewall -Name "azFw" -ResourceGroupName $rgName -Location centralus -VirtualNetwork $vnet -ManagementPublicIpAddress $mgmtPip

This example creates a "forced tunneling" Firewall that uses the subnet "AzureFirewallManagementSubnet" and the management public IP address for its management traffic. In this scenario, users do not have to specify a data Public IP if they are only using firewall for private traffic only.

Parameters

-AllowActiveFTP

Allows Active FTP on the Firewall. By default it is disabled.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ApplicationRuleCollection

Specifies the collections of application rules for the new Firewall.

Type:PSAzureFirewallApplicationRuleCollection[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-AsJob

Run cmdlet in the background

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DefaultProfile

The credentials, account, tenant, and subscription used for communication with azure.

Type:IAzureContextContainer
Aliases:AzContext, AzureRmContext, AzureCredential
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DnsServer

The list of DNS Servers to be used for DNS resolution,

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-EnableDnsProxy

Enable DNS Proxy. By default it is disabled.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-EnableFatFlowLogging

Enable Fat Flow Logging. By default it is false.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-EnableUDPLogOptimization

Enable UDP Log Optimization. By default it is false.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-FirewallPolicyId

The firewall policy attached to the firewall

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Force

Forces the command to run without asking for user confirmation.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-HubIPAddress

The ip addresses for the firewall attached to a virtual hub

Type:PSAzureFirewallHubIpAddresses
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Location

Specifies the region for the Firewall.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-ManagementPublicIpAddress

One or more Public IP Addresses to use for management traffic. The Public IP addresses must use Standard SKU and must belong to the same resource group as the Firewall.

Type:PSPublicIpAddress
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Name

Specifies the name of the Azure Firewall that this cmdlet creates.

Type:String
Aliases:ResourceName
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-NatRuleCollection

The list of AzureFirewallNatRuleCollections

Type:PSAzureFirewallNatRuleCollection[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-NetworkRuleCollection

The list of AzureFirewallNetworkRuleCollections

Type:PSAzureFirewallNetworkRuleCollection[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-PrivateRange

The private IP ranges to which traffic won't be SNAT'ed

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PublicIpAddress

One or more Public IP Addresses. The Public IP addresses must use Standard SKU and must belong to the same resource group as the Firewall. No input needed for Forced Tunneling Firewalls.

Type:PSPublicIpAddress[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-PublicIpName

Public Ip Name. The Public IP must use Standard SKU and must belong to the same resource group as the Firewall.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-ResourceGroupName

Specifies the name of a resource group to contain the Firewall.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-RouteServerId

The Route Server Id for the firewall

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-SkuName

The sku name for firewall

Type:String
Aliases:Sku
Accepted values:AZFW_Hub, AZFW_VNet
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-SkuTier

The sku tier for firewall

Type:String
Accepted values:Standard, Premium, Basic
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Tag

Key-value pairs in the form of a hash table. For example:

@{key0="value0";key1=$null;key2="value2"}

Type:Hashtable
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-ThreatIntelMode

Specifies the operation mode for Threat Intelligence. Default mode is Alert, not Off.

Type:String
Accepted values:Alert, Deny, Off
Position:Named
Default value:Alert
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-ThreatIntelWhitelist

The allowlist for Threat Intelligence

Type:PSAzureFirewallThreatIntelWhitelist
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-VirtualHubId

The virtual hub that a firewall is attached to

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-VirtualNetwork

Virtual Network

Type:PSVirtualNetwork
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-VirtualNetworkName

Specifies the name of the virtual network for which the Firewall will be deployed. Virtual network and Firewall must belong to the same resource group.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Zone

A list of availability zones denoting where the firewall needs to come from.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

String

PSVirtualNetwork

PSPublicIpAddress[]

PSPublicIpAddress

PSAzureFirewallApplicationRuleCollection[]

PSAzureFirewallNatRuleCollection[]

PSAzureFirewallNetworkRuleCollection[]

Hashtable

Outputs

PSAzureFirewall