Set-AzLoadBalancerProbeConfig

Updates a probe configuration for a load balancer.

Syntax

Set-AzLoadBalancerProbeConfig
   -LoadBalancer <PSLoadBalancer>
   -Name <String>
   [-Protocol <String>]
   -Port <Int32>
   -IntervalInSeconds <Int32>
   -ProbeCount <Int32>
   [-ProbeThreshold <Int32>]
   [-RequestPath <String>]
   [-NoHealthyBackendsBehavior <String>]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-AzLoadBalancerProbeConfig cmdlet updates a probe configuration for a load balancer.

Examples

Example 1: Modify the probe configuration on a load balancer

$slb = Get-AzLoadBalancer -Name "MyLoadBalancer" -ResourceGroupName "MyResourceGroup"
$slb | Add-AzLoadBalancerProbeConfig -Name "NewProbe" -Protocol "http" -Port 80 -IntervalInSeconds 15 -ProbeCount 2 -ProbeThreshold 2 -RequestPath "healthcheck.aspx" 
$slb | Set-AzLoadBalancerProbeConfig -Name "NewProbe" -Port 80 -IntervalInSeconds 15 -ProbeCount 2 -NoHealthyBackendsBehavior "AllProbedUp"

The first command gets the loadbalancer named MyLoadBalancer, and then stores it in the $slb variable. The second command uses the pipeline operator to pass the load balancer in $slb to Add-AzLoadBalancerProbeConfig, which adds a new probe configuration to it. The third command passes the load balancer to Set-AzLoadBalancerProbeConfig, which sets the new configuration. Note that it is necessary to specify several of the same parameters that were specified in the previous command because they are required by the current cmdlet.

Example 2

Updates a probe configuration for a load balancer. (autogenerated)

Set-AzLoadBalancerProbeConfig -IntervalInSeconds 15 -Name 'NewProbe' -Port 443 -ProbeCount 2 -Protocol https -LoadBalancer <PSLoadBalancer>

Parameters

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DefaultProfile

The credentials, account, tenant, and subscription used for communication with azure.

Type:IAzureContextContainer
Aliases:AzContext, AzureRmContext, AzureCredential
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IntervalInSeconds

Specifies the interval, in seconds, between probes to each instance of the load-balanced service.

Type:Int32
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-LoadBalancer

Specifies a load balancer. This cmdlet updates a probe configuration for the load balancer that this parameter specifies.

Type:PSLoadBalancer
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Name

Specifies the name of the probe configuration that this cmdlet sets.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-NoHealthyBackendsBehavior

Determines how new connections are handled by the load balancer when all backend instances are probed down. The acceptable values for this parameter are: AllProbedDown or AllProbedUp.

Type:String
Position:Named
Default value:AllProbedDown
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Port

Specifies the port on which probes should connect to a load-balanced service.

Type:Int32
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-ProbeCount

Specifies the number of per-instance consecutive failures for an instance to be considered unhealthy.

Type:Int32
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-ProbeThreshold

Specifies the number of consecutive successful or failed probes in order to allow or deny traffic from being delivered to this endpoint.

Type:Nullable<T>[Int32]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Protocol

Specifies the protocol to use for the probing. The acceptable values for this parameter are: Tcp or Http.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-RequestPath

Specifies the path in the load-balanced service to probe to determine health.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

PSLoadBalancer

String

Int32

Outputs

PSLoadBalancer