Sensor PowerState Test

  • [アーティクル]

This test validates that sensors will enter and leave power states at the appropriate time.

Test details

Associated requirements

Device.Input.Sensor.Base.Discretional

See the device hardware requirements.

Platforms

Windows 8.1 x64 Windows 8.1 x86

Expected run time

~2 minutes

Categories

Basic

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Sensor Device Testing Prerequisites.

If this test is being run against a GPS sensor device node, make sure that you are running the test in an environment in which you can receive a GPS signal.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Input Testing.

A GPS signal is required if the sensor under test is GPS.

You must enable all location privacy settings.

Close all apps and services that use sensors before running the test.

 

 

Send comments about this topic to Microsoft