WCN Device Verify the device is able to display the WPS Pin (Manual Test)

  • [アーティクル]

This test verifies that the device is able to display the Wi-Fi Protected Setup (WPS) PIN.

The device should have a way to display the WPS PIN. If the WPS PIN is static, it should be printed on the device and should be exactly 8 numeric characters. If the WPS PIN is dynamic, then the device should have a way to display the current WPS PIN on the device (like an LCD display). A dynamic WPS PIN can be 4 or 8 numeric characters. The test will pass if the device meets the specified criteria and fail if it does not.

Test details

Associated requirements

Device.Connectivity.Network.VerticalPairing.WCN

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows 8 (x64) Windows 8 (x86) Windows 8.1 x64 Windows 8.1 x86

Expected run time

~40 minutes

Categories

Certification

Type

Manual

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: USB Device.Connectivity Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Connectivity Testing.

 

 

Send comments about this topic to Microsoft