WHCKProximityDeviceTest - DeviceTouchMark

  • [アーティクル]

This test verifies that a proximity implementation that uses Near Field Communication (NFC) Tap features as defined by the NFC Forum adheres to the specifications of the NCF Forum. The test also verifies that the NFC Forum has certified the device as compliant.

During the test, you receive the following message:

Press Y to respond that the device has a touchmark on the chassis to indicate where to tap devices together.

Press any other key to respond that the touchmark requirement is not fulfilled.

You must press Y to successfully complete the test. This acts as an affirmation that the proximity device supports Tap features.

Test details

Associated requirements

Device.Connectivity.NearFieldProximity.TouchMark

See the device hardware requirements.

Platforms

Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~2 minutes

Categories

Certification

Type

Manual

 

Running the test

Before you run the test, complete the test setup as described in Proximity Device.Connectivity Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Connectivity Testing.

 

 

Send comments about this topic to Microsoft