RADIUS protocol

  • [アーティクル]

Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2

RADIUS protocol

Remote Authentication Dial-In User Service (RADIUS) is an industry standard protocol described in RFC 2865, "Remote Authentication Dial-in User Service (RADIUS)," and RFC 2866, "RADIUS Accounting." RADIUS is used to provide authentication, authorization, and accounting services. A RADIUS client (typically a dial-up server, VPN server, or wireless access point) sends user credentials and connection parameter information in the form of a RADIUS message to a RADIUS server. The RADIUS server authenticates and authorizes the RADIUS client request, and sends back a RADIUS message response. RADIUS clients also send RADIUS accounting messages to RADIUS servers. Additionally, the RADIUS standards support the use of RADIUS proxies. A RADIUS proxy is a computer that forwards RADIUS messages between RADIUS-enabled computers.

RADIUS messages are sent as User Datagram Protocol (UDP) messages. UDP port 1812 is used for RADIUS authentication messages and UDP port 1813 is used for RADIUS accounting messages. Some network access servers might use UDP port 1645 for RADIUS authentication messages and UDP port 1646 for RADIUS accounting messages. By default, IAS supports receiving RADIUS messages destined to both sets of UDP ports. For information about changing the UDP ports that are used by IAS, see Configure IAS port information. Only one RADIUS message is included in the UDP payload of a RADIUS packet.

RFCs 2865 and 2866 define the following RADIUS message types:

  • Access-Request

    Sent by a RADIUS client to request authentication and authorization for a connection attempt.

  • Access-Accept

    Sent by a RADIUS server in response to an Access-Request message. This message informs the RADIUS client that the connection attempt is authenticated and authorized.

  • Access-Reject

    Sent by a RADIUS server in response to an Access-Request message. This message informs the RADIUS client that the connection attempt is rejected. A RADIUS server sends this message if either the credentials are not authentic or the connection attempt is not authorized.

  • Access-Challenge

    Sent by a RADIUS server in response to an Access-Request message. This message is a challenge to the RADIUS client that requires a response.

  • Accounting-Request

    Sent by a RADIUS client to specify accounting information for a connection that was accepted.

  • Accounting-Response

    Sent by the RADIUS server in response to the Accounting-Request message. This message acknowledges the successful receipt and processing of the Accounting-Request message.

A RADIUS message consists of a RADIUS header and zero or more RADIUS attributes. Each RADIUS attribute specifies a piece of information about the connection attempt. For example, there are RADIUS attributes for the user name, the user password, the type of service requested by the user, and the IP address of the access server. RADIUS attributes are used to convey information between RADIUS clients, RADIUS proxies, and RADIUS servers. For example, the list of attributes in the Access-Request message includes information about the user credentials and the parameters of the connection attempt. In contrast, the Access-Accept message includes information about the type of connection that can be made, connection constraints, and any vendor-specific attributes (VSAs).

Note

  • You can configure IAS in Windows Server 2003, Standard Edition, with a maximum of 50 RADIUS clients and a maximum of 2 remote RADIUS server groups. You can define a RADIUS client using a fully qualified domain name or an IP address, but you cannot define groups of RADIUS clients by specifying an IP address range. If the fully qualified domain name of a RADIUS client resolves to multiple IP addresses, the IAS server uses the first IP address returned in the DNS query. With IAS in Windows Server 2003, Enterprise Edition, and Windows Server 2003, Datacenter Edition, you can configure an unlimited number of RADIUS clients and remote RADIUS server groups. In addition, you can configure RADIUS clients by specifying an IP address range.