Database Engine events and errors (3000 to 3999)

This article contains error message numbers (between the range 3,000 and 3,999) and their description, which is the text of the error message from the sys.messages catalog view. Where applicable, the error number is a link to further information.

For the full range of error numbers, see the list on Database Engine events and errors.

You can query the Database Engine to see a full list of all errors, by running the following query against the sys.messages catalog view:

SELECT message_id AS Error,
    severity AS Severity,
    [Event Logged] = CASE is_event_logged
        WHEN 0 THEN 'No' ELSE 'Yes'
        END,
    [text] AS [Description]
FROM sys.messages
WHERE language_id = 1040 /* replace 1040 with the desired language ID, such as 1033 for US English */
ORDER BY message_id;

SQL Server version

This article shows events and errors (between the range 3,000 and 3,999) for SQL Server 2016 (13.x). If you want to view events and errors for other versions of SQL Server, see:

This article shows events and errors (between the range 3,000 and 3,999) for SQL Server 2017 (14.x). If you want to view events and errors for other versions of SQL Server, see:

This article shows events and errors (between the range 3,000 and 3,999) for SQL Server 2019 (15.x). If you want to view events and errors for other versions of SQL Server, see:

This article shows events and errors (between the range 3,000 and 3,999) for SQL Server 2022 (16.x). If you want to view events and errors for other versions of SQL Server, see:

Errors and events (3000 to 3999)

Error Severity Event logged Description
3001 16 No obsolete
3002 16 No Cannot BACKUP or RESTORE a database snapshot.
3003 10 No This BACKUP WITH DIFFERENTIAL will be based on more than one file backup. All those file backups must be restored before attempting to restore this differential backup.
3004 16 No The primary filegroup cannot be backed up as a file backup because the database is using the SIMPLE recovery model. Consider taking a partial backup by specifying READ_WRITE_FILEGROUPS.
3005 10 No The differential partial backup is including a read-only filegroup, '%ls'. This filegroup was read-write when the base partial backup was created, but was later changed to read-only access. We recommend that you create a separate file backup of the '%ls' filegroup now, and then create a new partial backup to provide a new base for later differential partial backups.
3006 16 No The differential backup is not allowed because it would be based on more than one base backup. Multi-based differential backups are not allowed in the simple recovery model, and are never allowed for partial differential backups.
3007 16 No The backup of the file or filegroup "%ls" is not permitted because it is not online. Container state: "%ls" (%d). Restore status: %d. BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data.
3008 16 No The specified device type is not supported for backup mirroring.
3009 16 No Could not insert a backup or restore history/detail record in the msdb database. This may indicate a problem with the msdb database. The backup/restore operation was still successful.
3010 16 No Invalid backup mirror specification. All mirrors must have the same number of members.
3011 16 No All backup devices must be of the same general class (for example, DISK and TAPE).
3012 17 No VDI ran out of buffer when SQL Server attempted to send differential information to SQL Writer.
3013 16 No %hs is terminating abnormally.
3014 10 No %hs successfully processed %I64d pages in %d.%03d seconds (%d.%03d MB/sec).
3015 10 No %hs is not yet implemented.
3016 16 No Backup of file '%ls' is not permitted because it contains pages subject to an online restore sequence. Complete the restore sequence before taking the backup, or restrict the backup to exclude this file.
3017 16 No The restart-checkpoint file '%ls' could not be opened. Operating system error '%ls'. Correct the problem, or reissue the command without RESTART.
3018 10 No The restart-checkpoint file '%ls' was not found. The RESTORE command will continue from the beginning as if RESTART had not been specified.
3019 16 No The restart-checkpoint file '%ls' is from a previous interrupted RESTORE operation and is inconsistent with the current RESTORE command. The restart command must use the same syntax as the interrupted command, with the addition of the RESTART clause. Alternatively, reissue the current statement without the RESTART clause.
3021 16 No Cannot perform a backup or restore operation within a transaction.
3022 10 No This backup is a file backup of read-write data from a database that uses the simple recovery model. This is only appropriate if you plan to set the filegroup to read-only followed by a differential file backup. Consult Books Online for more information on managing read-only data for the simple recovery model. In particular, consider how partial backups are used.
3023 16 No Backup, file manipulation operations (such as ALTER DATABASE ADD FILE) and encryption changes on a database must be serialized. Reissue the statement after the current backup or file manipulation operation is completed.
3024 16 No You can only perform a full backup of the master database. Use BACKUP DATABASE to back up the entire master database.
3025 16 No Missing database name. Reissue the statement specifying a valid database name.
3027 16 No The filegroup "%.*ls" is not part of database "%.*ls".
3028 10 No The restart-checkpoint file '%ls' was corrupted and is being ignored. The RESTORE command will continue from the beginning as if RESTART had not been specified.
3031 16 No Option '%ls' conflicts with option(s) '%ls'. Remove the conflicting option and reissue the statement.
3032 16 No One or more of the options (%ls) are not supported for this statement. Review the documentation for supported options.
3033 16 No BACKUP DATABASE cannot be used on a database opened in emergency mode.
3034 16 No No files were selected to be processed. You may have selected one or more filegroups that have no members.
3035 16 No Cannot perform a differential backup for database "%ls", because a current database backup does not exist. Perform a full database backup by reissuing BACKUP DATABASE, omitting the WITH DIFFERENTIAL option.
3036 16 No The database "%ls" is in warm-standby state (set by executing RESTORE WITH STANDBY) and cannot be backed up until the entire restore sequence is completed.
3038 16 No The file name "%ls" is invalid as a backup device name. Reissue the BACKUP statement with a valid file name.
3039 16 No Cannot perform a differential backup for file '%ls' because a current file backup does not exist. Reissue BACKUP DATABASE omitting the WITH DIFFERENTIAL option.
3040 10 No An error occurred while informing replication of the backup. The backup will continue, but the replication environment should be inspected.
3041 16 Yes BACKUP failed to complete the command %.*ls. Check the backup application log for detailed messages.
3042 10 No BACKUP WITH CONTINUE_AFTER_ERROR successfully generated a backup of the damaged database. Refer to the SQL Server error log for information about the errors that were encountered.
3043 16 No BACKUP '%ls' detected an error on page (%d:%d) in file '%ls'.
3044 16 No Invalid zero-length device name. Reissue the BACKUP statement with a valid device name.
3045 16 No BACKUP or RESTORE requires the NTFS file system for FILESTREAM and full-text support. The path "%.*ls" is not usable.
3046 16 No Inconsistent metadata has been encountered. The only possible backup operation is a tail-log backup using the WITH CONTINUE_AFTER_ERROR or NO_TRUNCATE option.
3047 16 No The BackupDirectory registry key is not configured correctly. This key should specify the root path where disk backup files are stored when full path names are not provided. This path is also used to locate restart checkpoint files for RESTORE.
3048 16 No BACKUP LOG WITH TRUNCATE_ONLY cannot operate on database '%ls' because it is configured for database mirroring.
3049 16 No BACKUP detected corruption in the database log. Check the errorlog for more information.
3050 16 No SQL Server could not send the differential information for database file '%ls' of database '%ls\%ls' to the backup application because the differential information is too large to fit in memory, and an attempt to use a temporary file has failed.
3051 16 No BACKUP LOG was unable to maintain mirroring consistency for database '%ls'. Database mirroring has been suspended.
3052 16 No BACKUP LOG was unable to log updates for for database '%ls'. Subsequent log backups will be required to advance the backup point from %S_LSN to %S_LSN after log space is made available for logging them.
3053 16 No BACKUP '%ls' detected an error on a page in file '%ls'.
3054 16 No Differential file backups can include only read-only data for databases using the simple recovery model. Consider taking a partial backup by specifying READ_WRITE_FILEGROUPS.
3055 16 No Backup destination "%.*ls" supports a FILESTREAM filegroup. This filegroup cannot be used as a backup destination. Rerun the BACKUP statement with a valid backup destination.
3056 16 No The backup operation has detected an unexpected file in a FILESTREAM container. The backup operation will continue and include file '%ls'.
3057 16 No Invalid device name. The length of the device name provided exceeds supported limit (maximum length is:%d). Reissue the BACKUP statement with a valid device name.
3058 10 No File or device name exceeds the supported limit (maximum length is:%d) and will be truncated: %.*ls.
3059 16 No This BACKUP or RESTORE command is not supported on a database mirror or secondary replica.
3060 10 No The restart-checkpoint file '%ls' was corrupted. The restored database can not be recovered. Restart the RESTORE sequence.
3061 16 No The restart-checkpoint file '%ls' could not be opened. Operating system error '%ls'. Make the file available and retry the operation or, restart the RESTORE sequence.
3062 16 No Cannot backup from a HADRON secondary because it is not in Synchronizing or Synchronized state.
3063 16 No Write to backup block blob device %ls failed. Device has reached its limit of allowed blocks.
3064 16 No Write to backup block blob detected out of order write at offset %ld, last block offset was at %ld.
3065 16 No Attempt to commit the block list for a block blob failed. Blob Name is "%.*ls". Storage Errorcode %ld.
3066 16 No Could not find the database file referenced by the file snapshot %.*ls. Please make sure that the URL points to a valid snapshot on a database file.
3067 16 No Failed while trying to delete file snapshot %.*ls. Error code %ld.
3068 16 No Invalid file snapshot URL. Please make sure that the URL is correctly formed.
3069 16 No Striping a backup set across multiple devices is not permitted for file snapshot backups.
3070 16 No Specifying the WITH options FORMAT and FILE_SNAPSHOT is not permitted.
3071 16 No The database %.*ls is configured for file snapshot point in time restore, log backups are not permitted.
3072 16 No Backup encryption is incompatible with file snapshot backup if TDE is not enabled on the database.
3073 16 No The option WITH FILE_SNAPSHOT is only permitted if all database files are in Azure Storage.
3074 16 No Failed while getting attributes for the file snapshot %.*ls. Error code %ld.
3075 16 No Device name '%.*ls' is not a valid MOVE target when restoring from a File Snapshot Backup.
3076 16 No File Snapshot Backup is only permitted with a single backup device and no additonal mirrored devices.
3077 10 No File snapshot %.*ls not found.
3078 16 No The file name "%ls" is invalid as a backup device name for the specified device type. Reissue the BACKUP statement with a valid file name and device type.
3095 16 No The backup cannot be performed because 'ENCRYPTION' was requested after the media was formatted with an incompatible structure. To append to this media set, either omit 'ENCRYPTION' or create a new media set by using WITH FORMAT in your BACKUP statement. If you use WITH FORMAT on an existing media set, all its backup sets will be overwritten.
3096 16 No The Certificate specified for backup encryption has expired.
3097 16 No The Backup cannot be performed because the existing media set is formatted with an incompatible version.
3098 16 No The backup cannot be performed because '%ls' was requested after the media was formatted with an incompatible structure. To append to this media set, either omit '%ls' or specify '%ls'. Alternatively, you can create a new media set by using WITH FORMAT in your BACKUP statement. If you use WITH FORMAT on an existing media set, all its backup sets will be overwritten.
3099 16 No Backup Encryption options were specified, Backup Encryption support has not been enabled on this version.
3101 16 No Exclusive access could not be obtained because the database is in use.
3102 16 No %ls cannot process database '%ls' because it is in use by this session. It is recommended that the master database be used when performing this operation.
3103 16 No A partial restore sequence cannot be initiated by this command. To initiate a partial restore sequence, use the WITH PARTIAL clause of the RESTORE statement and provide a backup set which includes a full copy of at least the primary data file. The WITH PARTIAL clause of the RESTORE statement may not be used for any other purpose.
3104 16 No RESTORE cannot operate on database '%ls' because it is configured for database mirroring or has joined an availability group. If you intend to restore the database, use ALTER DATABASE to remove mirroring or to remove the database from its availability group.
3105 16 No RESTORE cannot restore any more pages into file '%ls' because the maximum number of pages (%d) are already being restored. Either complete the restore sequence for the existing pages, or use RESTORE FILE to restore all pages in the file.
3106 16 No The filegroup "%ls" is ambiguous. The identity in the backup set does not match the filegroup that is currently defined in the online database. To force the use of the filegroup in the backup set, take the database offline and then reissue the RESTORE command.
3107 16 No The file "%ls" is ambiguous. The identity in the backup set does not match the file that is currently defined in the online database. To force the use of the file in the backup set, take the database offline and then reissue the RESTORE command.
3108 16 No To restore the master database, the server must be running in single-user mode. For information on starting in single-user mode, see "How to: Start an Instance of SQL Server (sqlservr.exe)" in Books Online.
3109 16 No Master can only be restored and fully recovered in a single step using a full database backup. Options such as NORECOVERY, STANDBY, and STOPAT are not supported.
3110 14 No User does not have permission to RESTORE database '%.*ls'.
3111 16 No Page %S_PGID is a control page which cannot be restored in isolation. To repair this page, the entire file must be restored.
3112 16 No Cannot restore any database other than master when the server is in single user mode.
3113 16 No Invalid data was detected.
3115 16 No The database is using the simple recovery model. It is not possible to restore a subset of the read-write data.
3116 16 No The supplied backup is not on the same recovery path as the database, and is ineligible for use for an online file restore.
3117 16 No The log or differential backup cannot be restored because no files are ready to rollforward.
3118 16 No The database "%ls" does not exist. RESTORE can only create a database when restoring either a full backup or a file backup of the primary file.
3119 16 No Problems were identified while planning for the RESTORE statement. Previous messages provide details.
3120 16 No This backup set will not be restored because all data has already been restored to a point beyond the time covered by this backup set.
3121 16 No The file "%ls" is on a recovery path that is inconsistent with application of this backup set. RESTORE cannot continue.
3122 16 No File initialization failed. RESTORE cannot continue.
3123 16 No Invalid database name '%.*ls' specified for backup or restore operation.
3125 16 No The database is using the simple recovery model. The data in the backup it is not consistent with the current state of the database. Restoring more data is required before recovery is possible. Either restore a full file backup taken since the data was marked read-only, or restore the most recent base backup for the target data followed by a differential file backup.
3126 16 No The file "%ls" was not relocated using a relative path during the RESTORE step. A relative location is required when restoring a database from a standalone instance to a matrix instance. Use the WITH MOVE option to specify a relative location for the file.
3127 16 Yes The file '%.*ls' of restored database '%ls' is being left in the defunct state because the database is using the simple recovery model and the file is marked for read-write access. Therefore, only read-only files can be recovered by piecemeal restore.
3128 16 No File '%ls' has an unsupported page size (%d).
3129 16 No The contents of the file "%ls" are not consistent with a transition into the restore sequence. A restore from a backup set may be required.
3130 10 No The filegroup "%ls" is selected. At the time of backup it was known by the name "%ls"'. RESTORE will continue operating upon the renamed filegroup.
3131 10 No The file "%ls" is selected. At the time of backup it was known by the name "%ls". RESTORE will continue operating upon the renamed file.
3132 16 No The media set has %d media families but only %d are provided. All members must be provided.
3133 16 No The volume on device "%ls" is sequence number %d of media family %d, but sequence number %d of media family %d is expected. Check that the device specifications and loaded media are correct.
3134 10 Yes The differential base attribute for file '%ls' of database '%ls' has been reset because the file has been restored from a backup taken on a conflicting recovery path. The restore was allowed because the file was read-only and was consistent with the current status of the database. Any future differential backup of this file will require a new differential base.
3135 16 No The backup set in file '%ls' was created by %hs and cannot be used for this restore operation.
3136 16 No This differential backup cannot be restored because the database has not been restored to the correct earlier state.
3137 16 No Database cannot be reverted. Either the primary or the snapshot names are improperly specified, all other snapshots have not been dropped, or there are missing files.
3138 16 No The database cannot be reverted because FILESTREAM BLOBs are present.
3139 16 No Restore to snapshot is not allowed with the master database.
3140 16 No Could not adjust the space allocation for file '%ls'.
3141 16 No The database to be restored was named '%ls'. Reissue the statement using the WITH REPLACE option to overwrite the '%ls' database.
3142 16 No File "%ls" cannot be restored over the existing "%ls". Reissue the RESTORE statement using WITH REPLACE to overwrite pre-existing files, or WITH MOVE to identify an alternate location.
3143 16 No The data set on device '%ls' is not a SQL Server backup set.
3144 16 No File '%.*ls' was not backed up in file %d on device '%ls'. The file cannot be restored from this backup set.
3145 16 No The STOPAT option is not supported for databases that use the SIMPLE recovery model.
3147 16 No Backup and restore operations are not allowed on database tempdb.
3148 16 No This RESTORE statement is invalid in the current context. The 'Recover Data Only' option is only defined for secondary filegroups when the database is in an online state. When the database is in an offline state filegroups cannot be specified.
3149 16 No The file or filegroup "%ls" is not in a valid state for the "Recover Data Only" option to be used. Only secondary files in the OFFLINE or RECOVERY_PENDING state can be processed.
3150 10 No The master database has been successfully restored. Shutting down SQL Server.
3151 21 Yes Failed to restore master database. Shutting down SQL Server. Check the error logs, and rebuild the master database. For more information about how to rebuild the master database, see SQL Server Books Online.
3153 16 No The database is already fully recovered.
3154 16 No The backup set holds a backup of a database other than the existing '%ls' database.
3155 16 No The RESTORE operation cannot proceed because one or more files have been added or dropped from the database since the backup set was created.
3156 16 No File '%ls' cannot be restored to '%ls'. Use WITH MOVE to identify a valid location for the file.
3159 16 No The tail of the log for the database "%ls" has not been backed up. Use BACKUP LOG WITH NORECOVERY to backup the log if it contains work you do not want to lose. Use the WITH REPLACE or WITH STOPAT clause of the RESTORE statement to just overwrite the contents of the log.
3161 16 No The primary file is unavailable. It must be restored or otherwise made available.
3163 16 No The transaction log was damaged. All data files must be restored before RESTORE LOG can be attempted.
3165 16 No Database '%ls' was restored, however an error was encountered while replication was being restored/removed. The database has been left offline. See the topic MSSQL_ENG003165 in SQL Server Books Online.
3166 16 No RESTORE DATABASE could not drop database '%ls'. Drop the database and then reissue the RESTORE DATABASE statement.
3167 16 No RESTORE could not start database '%ls'.
3168 16 No The backup of the system database on the device %ls cannot be restored because it was created by a different version of the server (%ls) than this server (%ls).
3169 16 No The database was backed up on a server running version %ls. That version is incompatible with this server, which is running version %ls. Either restore the database on a server that supports the backup, or use a backup that is compatible with this server.
3170 16 No The STANDBY filename is invalid.
3171 16 No File %ls is defunct and cannot be restored into the online database.
3172 16 No Filegroup %ls is defunct and cannot be restored into the online database.
3173 16 No The STOPAT clause provided with this RESTORE statement indicates that the tail of the log contains changes that must be backed up to reach the target point in time. The tail of the log for the database "%ls" has not been backed up. Use BACKUP LOG WITH NORECOVERY to back up the log, or use the WITH REPLACE clause in your RESTORE statement to overwrite the tail of the log.
3174 16 No The file '%ls' cannot be moved by this RESTORE operation.
3175 10 No RESTORE FILEGROUP="%ls" was specified, but not all of its files are present in the backup set. File "%ls" is missing. RESTORE will continue, but if you want all files to be restored, you must restore other backup sets.
3176 16 No File '%ls' is claimed by '%ls'(%d) and '%ls'(%d). The WITH MOVE clause can be used to relocate one or more files.
3178 16 No File %ls is not in the correct state to have this differential backup applied to it.
3179 16 No The system database cannot be moved by RESTORE.
3180 16 No This backup cannot be restored using WITH STANDBY because a database upgrade is needed. Reissue the RESTORE without WITH STANDBY.
3181 10 No Attempting to restore this backup may encounter storage space problems. Subsequent messages will provide details.
3182 16 No The backup set cannot be restored because the database was damaged when the backup occurred. Salvage attempts may exploit WITH CONTINUE_AFTER_ERROR.
3183 16 No RESTORE detected an error on page (%d:%d) in database "%ls" as read from the backup set.
3184 10 No RESTORE WITH CONTINUE_AFTER_ERROR was successful but some damage was encountered. Inconsistencies in the database are possible.
3185 16 No RESTORE cannot apply this backup set because the database is suspect. Restore a backup set that repairs the damage.
3186 16 No The backup set has been damaged. RESTORE will not attempt to apply this backup set.
3187 16 No RESTORE WITH CHECKSUM cannot be specified because the backup set does not contain checksum information.
3188 10 No The backup set was written with damaged data by a BACKUP WITH CONTINUE_AFTER_ERROR.
3189 16 No Damage to the backup set was detected.
3190 16 No Filegroup '%ls' cannot be restored because it does not exist in the backup set.
3191 16 No Restore cannot continue because file '%ls' cannot be written. Ensure that all files in the database are writable.
3192 10 No Restore was successful but deferred transactions remain. These transactions cannot be resolved because there are data that is unavailable. Either use RESTORE to make that data available or drop the filegroups if you never need this data again. Dropping the filegroup results in a defunct filegroup.
3193 16 No Restore Log operations are not permitted for a Log Backup with FILE_SNAPSHOT if bulk operations were present during the backup period. The Restore can be accomplished by issuing Restore Database from this archive.
3194 16 No Page %S_PGID is beyond the end of the file. Only pages that are in the current range of the file can be restored.
3195 16 No Page %S_PGID cannot be restored from this backup set. RESTORE PAGE can only be used from full backup sets or from the first log or differential backup taken since the file was added to the database.
3196 16 No RESTORE master WITH SNAPSHOT is not supported. To restore master from a snapshot backup, stop the service and copy the data and log file.
3197 10 Yes I/O is frozen on database %ls. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup.
3198 10 Yes I/O was resumed on database %ls. No user action is required.
3199 16 No RESTORE requires MAXTRANSFERSIZE=%u but %u was specified.
3201 16 No Cannot open backup device '%ls'. Operating system error %ls.
3202 16 No Write on "%ls" failed: %ls
3203 16 No Read on "%ls" failed: %ls
3204 16 No The backup or restore was aborted.
3205 16 No Too many backup devices specified for backup or restore; only %d are allowed.
3206 16 No Backup device '%.*ls' does not exist. To view existing backup devices, use the sys.backup_devices catalog view. To create a new backup device use either sp_addumpdevice or SQL Server Management Studio.
3207 16 No Backup or restore requires at least one backup device. Rerun your statement specifying a backup device.
3208 16 No Unexpected end of file while reading beginning of backup set. Confirm that the media contains a valid SQL Server backup set, and see the console error log for more details.
3209 16 No Operation is not supported on user instances.
3210 16 No The mirror member in drive "%ls" is inconsistent with the mirror member in drive "%ls".
3211 10 No %d percent processed.
3212 16 No The mirror device "%ls" and the mirror device "%ls" have different device specifications.
3213 16 No Unable to unload one or more tapes. See the error log for details.
3214 16 No Too many backup mirrors are specified. Only %d are allowed.
3215 16 No Use WITH FORMAT to create a new mirrored backup set.
3216 16 No RESTORE REWINDONLY is only applicable to tape devices.
3217 16 No Invalid value specified for %ls parameter.
3218 16 No Backup mirroring is not available in this edition of SQL Server. See Books Online for more details on feature support in different SQL Server editions.
3219 16 No The file or filegroup "%.*ls" cannot be selected for this operation.
3220 16 No The specified URL points to a Block Blob. Backup and Restore operations on Block Blobs are not supported when WITH CREDENTIAL syntax is used.
3221 16 No The ReadFileEx system function executed on file '%ls' only read %d bytes, expected %d.
3222 16 No The WriteFileEx system function executed on file '%ls' only wrote %d bytes, expected %d.
3223 16 No Backup To URL failed to write status messages to the Windows Event Log.
3224 16 No Cannot create worker thread.
3225 16 No Use of WITH CREDENTIAL syntax is not valid for credentials containing a Shared Access Signature.
3226 16 No Failed to create snapshot for file "%ls".
3227 16 No The backup media on "%ls" is part of media family %d which has already been processed on "%ls". Ensure that backup devices are correctly specified. For tape devices, ensure that the correct volumes are loaded.
3229 16 No Request for device '%ls' timed out.
3230 16 No Operation on device '%ls' exceeded retry count.
3231 16 No The media loaded on "%ls" is formatted to support %d media families, but %d media families are expected according to the backup device specification.
3232 16 No The volume mounted on "%ls" does not have the expected backup set identity. The volume may be obsolete due to a more recent overwrite of this media family. In that case, locate the correct volume with sequence number %d of media family %d.
3234 16 No Logical file '%.*ls' is not part of database '%ls'. Use RESTORE FILELISTONLY to list the logical file names.
3235 16 No The file "%.*ls" is not part of database "%ls". You can only list files that are members of this database.
3238 16 No The Estimate for the Backup size exceeds the maximum allowed file size on the remote endpoint.
3239 16 No The backup set on device '%ls' uses a feature of the Microsoft Tape Format not supported by SQL Server.
3240 16 No Backup to mirrored media sets requires all mirrors to append. Provide all members of the set, or reformat a new media set.
3241 16 No The media family on device '%ls' is incorrectly formed. SQL Server cannot process this media family.
3242 16 No The file on device '%ls' is not a valid Microsoft Tape Format backup set.
3243 16 No The media family on device '%ls' was created using Microsoft Tape Format version %d.%d. SQL Server supports version %d.%d.
3244 16 No Descriptor block size exceeds %d bytes. Use a shorter name and/or description string and retry the operation.
3245 16 No Could not convert a string to or from Unicode, %ls.
3246 16 No The media family on device '%ls' is marked as nonappendable. Reissue the statement using the INIT option to overwrite the media.
3247 16 No The volume on device '%ls' has the wrong media sequence number (%d). Remove it and insert volume %d.
3249 16 No The volume on device '%ls' is a continuation volume for the backup set. Remove it and insert the volume holding the start of the backup set.
3250 16 No The value '%d' is not within range for the %ls parameter.
3251 10 No The media family on device '%ls' is complete. The device is now being reused for one of the remaining families.
3252 16 No Failed to copy snapshot with name '%ls', timestamp '%ls' to destination '%ls'. Error returned '%ls'.
3253 16 No The block size parameter must supply a value that is a power of 2.
3254 16 No The volume on device '%ls' is empty.
3255 16 No The data set on device '%ls' is a SQL Server backup set not compatible with this version of SQL Server.
3256 16 No The backup set on device '%ls' was terminated while it was being created and is incomplete. RESTORE sequence is terminated abnormally.
3257 16 No There is insufficient free space on disk volume '%ls' to create the database. The database requires %I64u additional free bytes, while only %I64u bytes are available.
3258 16 No The volume on the device "%ls" is not part of the media set that is currently being processed. Ensure that the backup devices are loaded with the correct media.
3259 16 No The volume on device '%ls' is not part of a multiple family media set. BACKUP WITH FORMAT can be used to form a new media set.
3260 16 No An internal buffer has become full.
3261 16 No SQL Server cannot use the virtual device configuration.
3262 10 No The backup set on file %d is valid.
3263 16 No Cannot use the volume on device '%ls' as a continuation volume. It is sequence number %d of family %d for the current media set. Insert a new volume, or sequence number %d of family %d for the current set.
3264 16 No The operation did not proceed far enough to allow RESTART. Reissue the statement without the RESTART qualifier.
3265 16 No The login has insufficient authority. Membership of the sysadmin role is required to use VIRTUAL_DEVICE with BACKUP or RESTORE.
3266 16 Yes The backup data at the end of "%ls" is incorrectly formatted. Backup sets on the media might be damaged and unusable. To determine the backup sets on the media, use RESTORE HEADERONLY. To determine the usability of the backup sets, run RESTORE VERIFYONLY. If all of the backup sets are incomplete, reformat the media using BACKUP WITH FORMAT, which destroys all the backup sets.
3267 16 No Insufficient resources to create UMS scheduler.
3268 16 No Cannot use the backup file '%ls' because it was originally formatted with sector size %d and is now on a device with sector size %d.
3269 16 No Cannot restore the file '%ls' because it was originally written with sector size %d; '%ls' is now on a device with sector size %d.
3270 16 No An internal consistency error has occurred. This error is similar to an assert. Contact technical support for assistance.
3271 16 No A nonrecoverable I/O error occurred on file "%ls:" %ls.
3272 16 No The '%ls' device has a hardware sector size of %d, but the block size parameter specifies an incompatible override value of %d. Reissue the statement using a compatible block size.
3273 16 No The BUFFERCOUNT parameter must supply a value that allows at least one buffer per backup device.
3276 16 No WITH SNAPSHOT can be used only if the backup set was created WITH SNAPSHOT.
3277 16 No WITH SNAPSHOT must be used with only one virtual device.
3278 16 No Failed to encrypt string %ls
3279 16 No Access is denied due to a password failure
3280 16 No Backups on raw devices are not supported. '%ls' is a raw device.
3281 10 No Released and initiated rewind on '%ls'.
3283 16 No The file "%ls" failed to initialize correctly. Examine the error logs for more details.
3284 16 No Filemark on device '%ls' is not aligned. Re-issue the Restore statement with the same blocksize used to create the backupset: '%d' looks like a possible value.
3285 10 No Filemark on device '%ls' appears not to be aligned. The restore operation will proceed using less efficient I/O. To avoid this, re-issue the Restore statement with the same blocksize used to create the backupset: '%d' looks like a possible value.
3286 16 No Backup failed because there is a mismatch in file metadata for file %d.
3287 16 No The file ID %d on device '%ls' is incorrectly formed and can not be read.
3288 16 No Credential name %.*ls does not exist or user does not have permission to access it.
3289 16 No A Backup device of type URL was specified without a Credential, Backup/Restore operation cannot proceed.
3290 16 No Backup to URL received an exception from the remote endpoint. Exception Message: %.*ls
3291 16 No URL device type was specified, and a disallowed option %ls was specified.
3292 16 No A failure occurred while attempting to execute Backup or Restore with a URL device specified. Consult the Windows Event Log for details.
3293 16 No An error occurred while Backup/Restore to URL was initializing. Error message: %.*ls.
3294 16 No Use of the URL device type is limited to a single device during Backup and Restore operations.
3295 16 No Backup To URL error: Exclusive access to the file %.*ls could not be obtained.
3296 16 No The file %.*ls exists on the remote endpoint, and WITH FORMAT was not specified. Backup cannot proceed.
3297 16 No The URL provided does not meet specified requirements. The URL must be either resolvable as an absolute or relative URI, has or can be composed as an HTTP or HTTPS scheme, and cannot contain a query component.
3298 16 No Backup/Restore to URL device error: %.*ls.
3299 16 No BackupToUrl initiated.
3301 21 Yes The transaction log contains a record (logop %d) that is not valid. The log has been corrupted. Restore the database from a full backup, or repair the database.
3302 21 Yes Redoing of logged operations in database '%.*ls' failed to reach end of log at log record ID %S_LSN. This indicates corruption around log record ID %S_LSN. Restore the database from a full backup, or repair the database.
3303 10 Yes Remote harden of transaction '%.*ls' (ID 0x%016I64x %ls) started at %S_DATE in database '%ls' at LSN %S_LSN failed.
3313 21 Yes During redoing of a logged operation in database '%.*ls', an error occurred at log record ID %S_LSN. Typically, the specific failure is previously logged as an error in the Windows Event Log service. Restore the database from a full backup, or repair the database.
3314 21 Yes During undoing of a logged operation in database '%.*ls', an error occurred at log record ID %S_LSN. Typically, the specific failure is logged previously as an error in the Windows Event Log service. Restore the database or file from a backup, or repair the database.
3315 21 Yes During rollback, the following process did not hold an expected lock: process %d with mode %d at level %d for row %S_RID in database '%.*ls' under transaction %S_XID. Restore a backup of the database, or repair the database.
3316 21 Yes During undo of a logged operation in database '%.*ls', an error occurred at log record ID %S_LSN. The row was not found. Restore the database from a full backup, or repair the database.
3401 10 Yes Errors occurred during recovery while rolling back a transaction. The transaction was deferred. Restore the bad page or file, and re-run recovery.
3402 10 Yes The database '%ls' is marked %ls and is in a state that does not allow recovery to be run.
3403 10 Yes Recovering only master database because traceflag 3608 was specified. This is an informational message only. No user action is required.
3404 10 Yes Failed to check for new installation or a renamed server at startup. The logic for this check has failed unexpectedly. Run setup again, or fix the problematic registry key.
3406 10 Yes %d transactions rolled forward in database '%.*ls' (%d:%d). This is an informational message only. No user action is required.
3407 10 Yes %d transactions rolled back in database '%.*ls' (%d:%d). This is an informational message only. No user action is required.
3408 10 Yes Recovery is complete. This is an informational message only. No user action is required.
3409 16 Yes Performance counter shared memory setup failed with error %d. Reinstall sqlctr.ini for this instance, and ensure that the instance login account has correct registry permissions.
3410 10 Yes Data in filegroup %s is offline, and deferred transactions exist. Use RESTORE to recover the filegroup, or drop the filegroup if you never intend to recover it. Log truncation cannot occur until this condition is resolved.
3411 21 Yes Configuration block version %d is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
3412 10 Yes Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically. After the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
3413 21 Yes Database ID %d. Could not mark database as suspect. Getnext NC scan on sys.databases.database_id failed. Refer to previous errors in the error log to identify the cause and correct any associated problems.
3414 10 Yes An error occurred during recovery, preventing the database '%ls' (%d:%d) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
3415 16 Yes Database '%.*ls' cannot be upgraded because it is read-only, has read-only files or the user does not have permissions to modify some of the files. Make the database or files writeable, and rerun recovery.
3416 16 Yes The server contains read-only files that must be made writable before the server can be recollated.
3417 21 Yes Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
3418 10 Yes Recovery is unable to defer error %d. Errors can only be deferred in databases using the full recovery model and an active backup log chain.
3419 16 Yes Recovery for database '%.*ls' is being skipped because it requires an upgrade but is marked for Standby. Use RESTORE DATABASE WITH NORECOVERY to take the database back to a Restoring state and continue the restore sequence.
3420 21 Yes Database snapshot '%ls' has failed an IO operation and is marked suspect. It must be dropped and recreated.
3421 10 Yes Recovery completed for database %ls (database ID %d) in %I64d second(s) (analysis %I64d ms, redo %I64d ms, undo %I64d ms.) This is an informational message only. No user action is required.
3422 10 Yes Database %ls was shutdown due to error %d in routine '%hs'. Restart for non-snapshot databases will be attempted after all connections to the database are aborted.
3429 10 Yes Recovery could not determine the outcome of a cross-database transaction %S_XID, named '%.*ls', in database '%.*ls' (database ID %d:%d). The coordinating database (database ID %d:%d) was unavailable. The transaction was assumed to be committed. If the transaction was not committed, you can retry recovery when the coordinating database is available.
3431 21 Yes Could not recover database '%.*ls' (database ID %d) because of unresolved transaction outcomes. Microsoft Distributed Transaction Coordinator (MS DTC) transactions were prepared, but MS DTC was unable to determine the resolution. To resolve, either fix MS DTC, restore from a full backup, or repair the database.
3434 20 Yes Cannot change sort order or locale. An unexpected failure occurred while trying to reindex the server to a new collation. SQL Server is shutting down. Restart SQL Server to continue with the sort order unchanged. Diagnose and correct previous errors and then retry the operation.
3437 21 Yes An error occurred while recovering database '%.*ls'. Unable to connect to Microsoft Distributed Transaction Coordinator (MS DTC) to check the completion status of transaction %S_XID. Fix MS DTC, and run recovery again.
3441 21 Yes During startup of warm standby database '%.*ls' (database ID %d), its standby file ('%ls') was inaccessible to the RESTORE statement. The operating system error was '%ls'. Diagnose the operating system error, correct the problem, and retry startup.
3443 21 Yes Database '%ls' (database ID %d:%d) was marked for standby or read-only use, but has been modified. The RESTORE LOG statement cannot be performed. Restore the database from a backup.
3445 21 Yes File '%ls' is not a valid undo file for database '%.*ls (database ID %d). Verify the file path, and specify the correct file.
3446 16 No Primary log file is not available for database '%ls' (%d:%d). The log cannot be backed up.
3447 16 No Could not activate or scan all of the log files for database '%.*ls'.
3448 21 Yes Rollback encountered a page with a log sequence number (LSN) less than the original log record LSN. Could not undo log record %S_LSN, for transaction ID %S_XID, on page %S_PGID, database '%ls' (%d:%d). Page information: LSN = %S_LSN, type = %ld. Log information: OpCode = %ld, context %ld. Restore or repair the database.
3449 21 Yes SQL Server must shut down in order to recover a database (database ID %d). The database is either a user database that could not be shut down or a system database. Restart SQL Server. If the database fails to recover after another startup, repair or restore the database.
3450 10 Yes Recovery of database '%.*ls' (%d) is %d%% complete (approximately %d seconds remain). Phase %d of 3. This is an informational message only. No user action is required.
3452 10 Yes Recovery of database '%.*ls' (%d) detected possible identity value inconsistency in table ID %d. Run DBCC CHECKIDENT ('%.*ls').
3453 16 No This version cannot redo any index creation or non-logged operation done by SQL Server 7.0. Further roll forward is not possible.
3454 10 Yes Recovery is writing a checkpoint in database '%.*ls' (%d). This is an informational message only. No user action is required.
3456 21 Yes Could not redo log record %S_LSN, for transaction ID %S_XID, on page %S_PGID, allocation unit %I64d, database '%.*ls' (database ID %d). Page: LSN = %S_LSN, allocation unit = %I64d, type = %ld. Log: OpCode = %ld, context %ld, PrevPageLSN: %S_LSN. Restore from a backup of the database, or repair the database.
3457 21 Yes Transactional file system resource manager '%.*ls' failed to recover. For more information, see the accompanying error message, which determines the appropriate user action.
3458 16 No Recovery cannot scan database "%.*ls" for dropped allocation units because an unexpected error has occurred. These allocation units cannot be cleaned up.
3459 16 No Recovery of database "%.*ls" failed to redo a file add for file "%.*ls". Please delete the file and retry.
3460 21 Yes Failed to shutdown a database (database ID %d) that contains memory-optimized data. Restart SQL Server to bring the database to a consistent state. If the database fails to recover after restart, repair or restore the database.
3505 14 No Only the owner of database "%.*ls" or someone with relevant permissions can run the CHECKPOINT statement.
3604 10 No Duplicate key was ignored.
3605 16 No Schema verification failed for database '%.*ls'.
3606 10 No Arithmetic overflow occurred.
3607 10 No Division by zero occurred.
3608 16 No Cannot allocate a GUID for the token.
3609 16 No The transaction ended in the trigger. The batch has been aborted.
3611 10 No %hs SQL Server Execution Times:%hs CPU time not measured under fiber mode, elapsed time = %lu ms.
3612 10 No %hs SQL Server Execution Times:%hs CPU time = %lu ms, elapsed time = %lu ms.
3613 10 No SQL Server parse and compile time: %hs CPU time = %lu ms, elapsed time = %lu ms.
3615 10 No Table '%.*ls'. Scan count %d, logical reads %d, physical reads %d, read-ahead reads %d, lob logical reads %d, lob physical reads %d, lob read-ahead reads %d.
3616 16 No An error was raised during trigger execution. The batch has been aborted and the user transaction, if any, has been rolled back.
3619 10 Yes Could not write a checkpoint record in database %ls because the log is out of space. Contact the database administrator to truncate the log or allocate more space to the database log files.
3620 10 Yes Automatic checkpointing is disabled in database '%.*ls' because the log is out of space. Automatic checkpointing will be enabled when the database owner successfully checkpoints the database. Contact the database owner to either truncate the log file or add more disk space to the log. Then retry the CHECKPOINT statement.
3621 10 No The statement has been terminated.
3622 10 No Warning: An invalid floating point operation occurred.
3623 16 No An invalid floating point operation occurred.
3624 20 Yes A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a Hotfix from Technical Support.
3625 20 Yes '%hs' is not yet implemented.
3627 17 Yes New parallel operation cannot be started due to too many parallel operations executing at this time. Use the "max worker threads" configuration option to increase the number of allowable threads, or reduce the number of parallel operations running on the system.
3628 24 Yes The Database Engine received a floating point exception from the operating system while processing a user request. Try the transaction again. If the problem persists, contact your system administrator.
3633 16 Yes The operating system returned the error '%ls' while attempting '%ls' on '%ls' at '%hs'(%d).
3634 16 Yes The operating system returned the error '%ls' while attempting '%ls' on '%ls'.
3635 16 Yes An error occurred while processing '%ls' metadata for database id %d, file id %d, and transaction='%.*ls'. Additional Context='%ls'. Location='%hs'(%d). Retry the operation; if the problem persists, contact the database administrator to review locking and memory configurations. Review the application for possible deadlock conflicts.
3636 16 No An error occurred while processing '%ls' metadata for database id %d file id %d.
3637 16 No A parallel operation cannot be started from a DAC connection.
3641 10 No Total logical reads %lu, physical reads %lu, writes %lu.
3642 10 No Table '%.*ls'. Segment reads %u, segment skipped %u.
3701 11 No Cannot %S_MSG the %S_MSG '%.*ls', because it does not exist or you do not have permission.
3702 16 No Cannot drop database "%.*ls" because it is currently in use.
3703 16 No Cannot detach the %S_MSG '%.*ls' because it is currently in use.
3705 16 No Cannot use DROP %ls with '%.*ls' because '%.*ls' is a %S_MSG. Use %ls.
3706 16 No Cannot %S_MSG a database snapshot.
3707 16 No Cannot detach a suspect or recovery pending database. It must be repaired or dropped.
3708 16 No Cannot %S_MSG the %S_MSG '%.*ls' because it is a system %S_MSG.
3709 16 No Cannot %S_MSG the database while the database snapshot "%.*ls" refers to it. Drop that database first.
3710 16 No Cannot detach an opened database when the server is in minimally configured mode.
3716 16 No The %S_MSG '%.*ls' cannot be dropped because it is bound to one or more %S_MSG.
3717 16 No Cannot drop a default constraint by DROP DEFAULT statement. Use ALTER TABLE to drop a constraint default.
3718 11 No Could not drop index '%.*ls' because the table or clustered index entry cannot be found in the sysindexes system table.
3721 16 No Type '%.*ls' cannot be renamed because it is being referenced by object '%.*ls'.
3723 16 No An explicit DROP INDEX is not allowed on index '%.*ls'. It is being used for %ls constraint enforcement.
3724 16 No Cannot %S_MSG the %S_MSG '%.*ls' because it is being used for replication.
3725 16 No The constraint '%.*ls' is being referenced by table '%.*ls', foreign key constraint '%.*ls'.
3726 16 No Could not drop object '%.*ls' because it is referenced by a FOREIGN KEY constraint.
3727 10 No Could not drop constraint. See previous errors.
3728 16 No '%.*ls' is not a constraint.
3729 16 No Cannot %ls '%.*ls' because it is being referenced by object '%.*ls'.
3730 16 No Cannot drop the default constraint '%.*ls' while it is being used by a foreign key as SET DEFAULT referential action.
3732 16 No Cannot drop type '%.*ls' because it is being referenced by object '%.*ls'. There may be other objects that reference this type.
3733 16 No Constraint '%.*ls' does not belong to table '%.*ls'.
3734 16 No Could not drop the primary key constraint '%.*ls' because the table has an XML or spatial index.
3735 16 No The primary key constraint '%.*ls' on table '%.*ls' cannot be dropped because change tracking is enabled on the table. Change tracking requires a primary key constraint on the table. Disable change tracking before dropping the constraint.
3736 16 No Cannot drop the %S_MSG '%.*ls' because it is being used for distribution.
3737 16 No Could not delete file '%ls'. See the SQL Server error log for more information.
3738 10 No Deleting database file '%ls'.
3739 11 No Cannot %ls the index '%.*ls' because it is not a statistics collection.
3740 16 No Cannot drop the %S_MSG '%.*ls' because at least part of the table resides on a read-only filegroup.
3741 16 No Cannot drop the %S_MSG '%.*ls' because at least part of the table resides on an offline filegroup.
3743 16 No The database '%.*ls' is enabled for database mirroring. Database mirroring must be removed before you drop the database.
3744 16 No Only a single clause is allowed in a statement where an index is dropped online.
3745 16 No Only a clustered index can be dropped online.
3746 16 No Cannot drop the clustered index of view '%.*ls' because the view is being used for replication.
3747 16 No Cannot drop a clustered index created on a view using drop clustered index clause. Clustered index '%.*ls' is created on view '%.*ls'.
3748 16 No Cannot drop non-clustered index '%.*ls' using drop clustered index clause.
3749 16 No Cannot drop XML Index '%.*ls' using old 'Table.Index' syntax, use 'Index ON Table' syntax instead.
3750 10 No Warning: Index '%.*ls' on %S_MSG '%.*ls' was disabled as a result of disabling the clustered index on the %S_MSG.
3751 16 No Cannot use SP_DROPEXTENDEDPROC or DBCC DROPEXTENDEDPROC with '%.*ls' because '%.*ls' is a %S_MSG. Use %ls.
3752 16 No The database '%.*ls' is currently joined to an availability group. Before you can drop the database, you need to remove it from the availability group.
3753 16 No Cannot %S_MSG the federation member '%.*ls', because the federation root does not exist.
3754 16 No TRUNCATE TABLE statement failed. Index '%.*ls' uses partition function '%.*ls', but table '%.*ls' uses non-equivalent partition function '%.*ls'. Index and table must use an equivalent partition function.
3755 16 No Cannot drop a database with file snapshots on it. Please detach the database instead of dropping or delete the file snapshots and retry the drop.
3756 16 No TRUNCATE TABLE statement failed. Index '%.*ls' is not partitioned, but table '%.*ls' uses partition function '%.*ls'. Index and table must use an equivalent partition function.
3800 16 No Column name '%.*ls' is not sufficiently different from the names of other columns in the table '%.*ls'.
3801 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" may be impacted by the collation upgrade. Run DBCC CHECKTABLE.
3802 10 No Warning: The constraint "%.*ls" on "%.*ls"."%.*ls" may be impacted by the collation upgrade. Disable and enable WITH CHECK.
3803 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" is disabled because the implementation of the checksum function has changed.
3804 10 No Warning: The check constraint "%.*ls" on table "%.*ls"."%.*ls" is disabled because the implementation of the checksum function has changed.
3805 10 No Warning: Index "%.*ls" on table "%.*ls"."%.*ls" might be corrupted because it references computed column "%.*ls" containing a non-deterministic conversion from string to date. Run DBCC CHECKTABLE to verify index. Consider using explicit CONVERT with deterministic date style such as 121. Computed column indexes referencing non-deterministic expressions can't be created in 90 compatibility mode. See Books Online topic "Creating Indexes on Computed Columns" for more information.
3806 10 No Warning: Indexed view "%.*ls"."%.*ls" might be corrupted because it contains a non-deterministic conversion from string to date. Run DBCC CHECKTABLE to verify view. Consider using explicit CONVERT with deterministic date style such as 121. Indexed views referencing non-deterministic expressions can't be created in 90 compatibility mode. See Books Online topic "Creating Indexed Views" for more information.
3807 17 No Create failed because all available identifiers have been exhausted.
3808 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" is disabled because the index is defined on a view with ignore_dup_key index option. Drop the index and, if possible, recreate it without ignore_dup_key option. You may need to change the logical structure of the view to ensure all rows are unique.
3809 16 No Upgrade of database "%.*ls" failed because index "%.*ls" on object ID %d has the same name as that of another index on the same table.
3810 10 No Event notification "%.*ls" on assembly is dropped.
3811 10 No Event notification "%.*ls" on service queue is dropped as broker instance is not specified.
3812 10 No Event notification "%.*ls" on object is dropped.
3813 16 No Upgrade of login '%.*ls' failed because its name or sid is a duplicate of another login or server role.
3814 16 No Local login mapped to remote login '%.*ls' on server '%.*ls' is invalid. Drop and recreate the remote login before upgrade.
3815 16 No Local login mapped to linked login '%.*ls' on server '%.*ls' is invalid. Drop and recreate the linked login before upgrade.
3816 16 No Upgrade of login '%.*ls' failed because its password hash is invalid. Update the login password before upgrade.
3817 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" was disabled because the implementation of "%.*ls" have changed.
3818 20 No Invalid or unexpected message received.
3819 10 No Warning: The check constraint "%.*ls" on "%.*ls"."%.*ls" was disabled and set as not trusted because the implementation of "%.*ls" have changed.
3821 10 No Warning: The foreign key constraint "%.*ls" on "%.*ls"."%.*ls" was disabled because the implementation of '%.*ls' have changed.
3822 10 No Warning: The heap "%.*ls"."%.*ls" has persisted computed columns that depends on a geometry or geography methods and may contain out-of-date information. Because of this, DBCC may report inconsistencies on this table. The persisted computed columns depending on geometry or geography methods should be unpersisted and persisted again to refresh the data.
3823 10 No Warning: The object "%.*ls"."%.*ls" could not be bound and was ignored during upgrade. Consider reviewing and correcting its definition.
3824 16 No Invalid partition fragment map is specified.
3827 10 No Warning: The table "%.*ls"."%.*ls" is unavailable because it contains a persisted computed column that depends on "%.*ls", the implementation of which has changed. Rebuild the table offline and reconstruct the persisted computed column.
3828 10 No Metadata cache entry %d:%d in database ID(%d) does not match between brick ID %d and %d.
3829 10 No Metadata cache entry %d:%d in database ID(%d) is not checked for coherency due to lock timeout.
3830 10 No Metadata cache coherency check for database ID(%d) did not find any inconsistency.
3851 10 No An invalid row (%ls) was found in the system table sys.%ls%ls.
3852 10 No Row (%ls) in sys.%ls%ls does not have a matching row (%ls) in sys.%ls%ls.
3853 10 No Attribute (%ls) of row (%ls) in sys.%ls%ls does not have a matching row (%ls) in sys.%ls%ls.
3854 10 No Attribute (%ls) of row (%ls) in sys.%ls%ls has a matching row (%ls) in sys.%ls%ls that is invalid.
3855 10 No Attribute (%ls) exists without a row (%ls) in sys.%ls%ls.
3856 10 No Attribute (%ls) exists but should not for row (%ls) in sys.%ls%ls.
3857 10 No The attribute (%ls) is required but is missing for row (%ls) in sys.%ls%ls.
3858 10 No The attribute (%ls) of row (%ls) in sys.%ls%ls has an invalid value.
3859 10 No Warning: The system catalog was updated directly in database ID %d, most recently at %S_DATE.
3860 10 No Cannot upgrade database ID 32767. This ID value is reserved for SQL Server internal use.
3862 10 No CLR type '%.*ls'.'%.*ls' is disabled because the on disk format for this CLR type has been changed. Use DROP TYPE to remove this disabled type.
3864 23 Yes Could not find an entry for index with ID %d on object with ID %d in database with ID %d. Possible schema corruption. Run DBCC CHECKDB.
3865 16 No The operation on object '%.*ls' is blocked. The object is a FileTable system defined object and user modifications are not allowed.
3866 10 Yes The operation on FileTable system defined object '%.*ls' was allowed because of traceflag settings. To prevent this informational message from appearing in the error log, use DBCC TRACEOFF to turn off the trace flag.
3867 10 No The FileTable object '%.*ls' contains system defined constraints that cannot be modified as long as the FILETABLE_NAMESPACE option is enabled on the table. Only user defined constraints have been updated.
3901 16 No The transaction name must be specified when it is used with the mark option.
3902 16 No The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.
3903 16 No The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION.
3904 21 No Cannot unsplit logical page %S_PGID in object '%.*ls', in database '%.*ls'. Both pages together contain more data than will fit on one page.
3906 16 No Failed to update database "%.*ls" because the database is read-only.
3908 16 No Could not run BEGIN TRANSACTION in database '%.*ls' because the database is in emergency mode or is damaged and must be restarted.
3909 16 No Session binding token is invalid.
3910 16 No Transaction context in use by another session.
3912 16 No Cannot bind using an XP token while the server is not in an XP call.
3913 16 Yes TDS reset connection protocol error. Client driver requested both ResetConnectionKeepLocalXact and ResetConnectionKeepDTCXact at the same time. This is not expected in server.
3914 16 No The data type "%s" is invalid for transaction names or savepoint names. Allowed data types are char, varchar, nchar, varchar(max), nvarchar, and nvarchar(max).
3915 16 No Cannot use the ROLLBACK statement within an INSERT-EXEC statement.
3916 16 No Cannot use the COMMIT statement within an INSERT-EXEC statement unless BEGIN TRANSACTION is used first.
3917 16 No Session is bound to a transaction context that is in use. Other statements in the batch were ignored.
3918 16 No The statement or function must be executed in the context of a user transaction.
3919 16 No Cannot enlist in the transaction because the transaction has already been committed or rolled back.
3920 10 No The WITH MARK option only applies to the first BEGIN TRAN WITH MARK statement. The option is ignored.
3921 16 No Cannot get a transaction token if there is no transaction active. Reissue the statement after a transaction has been started
3922 16 No Cannot enlist in the transaction because the transaction does not exist.
3923 10 No Cannot use transaction marks on database '%.*ls' with bulk-logged operations that have not been backed up. The mark is ignored.
3924 10 No The session was enlisted in an active user transaction while trying to bind to a new transaction. The session has defected from the previous user transaction.
3925 16 No Invalid transaction mark name. The 'LSN:' prefix is reserved.
3926 10 No The transaction active in this session has been committed or aborted by another session.
3927 10 No The session had an active transaction when it tried to enlist in a Distributed Transaction Coordinator transaction.
3928 16 No The marked transaction "%.*ls" failed. A timeout occurred while attempting to place a mark in the log by committing the marked transaction. This can be caused by contention with Microsoft Distributed Transaction Coordinator (MS DTC) transactions or other local marked transaction that have prepared, but not committed or aborted. Try the operation again and if the error persists, determine the source of the contention.
3929 16 No No distributed or bound transaction is allowed in single user database.
3930 16 No The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.
3931 16 No The current transaction cannot be committed and cannot be rolled back to a savepoint. Roll back the entire transaction.
3932 16 No The save point name "%.*ls" that was provided is too long. The maximum allowed length is %d characters.
3933 16 No Cannot promote the transaction to a distributed transaction because there is an active save point in this transaction.
3934 14 No The current user cannot use this FILESTREAM transaction context. To obtain a valid FILESTREAM transaction context, use GET_FILESTREAM_TRANSACTION_CONTEXT.
3935 16 No A FILESTREAM transaction context could not be initialized. This might be caused by a resource shortage. Retry the operation. Error code: 0x%x.
3936 16 No The transaction could not be committed because an error occurred while tyring to flush FILESTREAM data to disk. A file may have been open at commit time or a disk I/O error may have occurred. '%.*ls' was one of the one or more files involved. ErorrCode: 0x%x
3937 16 No While rolling back a transaction, an error occurred while trying to deliver a rollback notification to the FILESTREAM filter driver. Error code: 0x%0x.
3938 18 No The transaction has been stopped because it conflicted with the execution of a FILESTREAM close operation using the same transaction. The transaction will be rolled back.
3939 16 No An uncommittable transaction was detected at the beginning of the batch. The transaction was rolled back. This was caused by an error that occurred during the processing of a FILESTREAM request in the context of this transaction.
3940 16 No Failed to acquire necessary locks during commit and the transaction was rolled back.
3948 16 No The transaction was terminated because of the availability replica config/state change or because ghost records are being deleted on the primary and the secondary availability replica that might be needed by queries running under snapshot isolation. Retry the transaction.
3949 16 No Transaction aborted when accessing versioned row in table '%.*ls' in database '%.*ls'. Requested versioned row was not found because the readable secondary access is not allowed for the operation that attempted to create the version. This might be timing related, so try the query again later.
3950 16 No Version store scan timed out when attempting to read the next row. Please try the statement again later when the system is not as busy.
3951 16 No Transaction failed in database '%.*ls' because the statement was run under snapshot isolation but the transaction did not start in snapshot isolation. You cannot change the isolation level of the transaction to snapshot after the transaction has started unless the transaction was originally started under snapshot isolation level.
3952 16 No Snapshot isolation transaction failed accessing database '%.*ls' because snapshot isolation is not allowed in this database. Use ALTER DATABASE to allow snapshot isolation.
3953 16 No Snapshot isolation transaction failed in database '%.*ls' because the database was not recovered when the current transaction was started. Retry the transaction after the database has recovered.
3954 16 No Snapshot isolation transaction failed to start in database '%.*ls' because the ALTER DATABASE command that disallows snapshot isolation had started before this transaction began. The database is in transition to OFF state. You will either need to change the isolation level of the transaction or re-enable the snapshot isolation in the database.
3955 16 No Snapshot isolation transaction failed in database '%.*ls' because the recovery was skipped for this database. You must recover the database before you can run a transaction under snapshot isolation.
3956 16 No Snapshot isolation transaction failed to start in database '%.*ls' because the ALTER DATABASE command which enables snapshot isolation for this database has not finished yet. The database is in transition to pending ON state. You must wait until the ALTER DATABASE Command completes successfully.
3957 16 No Snapshot isolation transaction failed in database '%.*ls' because the database did not allow snapshot isolation when the current transaction started. It may help to retry the transaction.
3958 16 No Transaction aborted when accessing versioned row in table '%.*ls' in database '%.*ls'. Requested versioned row was not found. Your tempdb is probably out of space. Please refer to BOL on how to configure tempdb for versioning.
3959 10 Yes Version store is full. New version(s) could not be added. A transaction that needs to access the version store may be rolled back. Please refer to BOL on how to configure tempdb for versioning.
3960 16 No Snapshot isolation transaction aborted due to update conflict. You cannot use snapshot isolation to access table '%.*ls' directly or indirectly in database '%.*ls' to update, delete, or insert the row that has been modified or deleted by another transaction. Retry the transaction or change the isolation level for the update/delete statement.
3961 16 No Snapshot isolation transaction failed in database '%.*ls' because the object accessed by the statement has been modified by a DDL statement in another concurrent transaction since the start of this transaction. It is disallowed because the metadata is not versioned. A concurrent update to metadata can lead to inconsistency if mixed with snapshot isolation.
3962 16 No Bind to another transaction while executing SQL Server internal query is not supported. Check your logon trigger definition and remove any sp_bindsession usage if any. If this error is not happening during logon trigger execution, contact production support team.
3963 16 No Transaction failed in database '%.*ls' because distributed transactions are not supported under snapshot isolation.
3964 16 No Transaction failed because this DDL statement is not allowed inside a snapshot isolation transaction. Since metadata is not versioned, a metadata change can lead to inconsistency if mixed within snapshot isolation.
3965 16 No The PROMOTE TRANSACTION request failed because there is no local transaction active.
3966 17 No Transaction is rolled back when accessing version store. It was earlier marked as victim when the version store was shrunk due to insufficient space in tempdb. This transaction was marked as a victim earlier because it may need the row version(s) that have already been removed to make space in tempdb. Retry the transaction
3967 17 Yes Insufficient space in tempdb to hold row versions. Need to shrink the version store to free up some space in tempdb. Transaction (id=%I64d xsn=%I64d spid=%d elapsed_time=%d) has been marked as victim and it will be rolled back if it accesses the version store. If the problem persists, the likely cause is improperly sized tempdb or long running transactions. Please refer to BOL on how to configure tempdb for versioning.
3968 10 No Snapshot isolation or read committed snapshot is not available in database '%.*ls' because SQL Server was started with one or more undocumented trace flags that prevent enabling database for versioning. Transaction started with snapshot isolation will fail and a query running under read committed snapshot will succeed but will resort back to lock based read committed.
3969 16 No Distributed transaction is not supported while running SQL Server internal query. Check your logon trigger definition and remove any distributed transaction usage if any. If this error is not happening during logon trigger execution, contact production support team.
3970 16 No This operation conflicts with another pending operation on this transaction. The operation failed.
3971 16 No The server failed to resume the transaction. Desc:%I64x.
3972 20 Yes Incoming Tabular Data Stream (TDS) protocol is incorrect. Transaction Manager event has wrong length. Event type: %d. Expected length: %d. Actual length: %d.
3973 16 No The database is currently being used by another thread under the same workspace in exclusive mode. The operation failed.
3974 16 No The number of databases in exclusive mode usage under a workspace is limited. Because the limit has been exceeded, the operation failed.
3975 16 No The varchar(max) data type is not supported for sp_getbindtoken. The batch has been aborted.
3976 16 No The transaction name has the odd length %d. The batch has been aborted.
3977 16 No The savepoint name cannot be NULL. The batch has been aborted.
3978 16 No Beginning a new transaction after rollback to save point is not allowed.
3979 16 No The TM request is longer than expected. The request is not processed.
3980 16 No The request failed to run because the batch is aborted, this can be caused by abort signal sent from client, or another request is running in the same session, which makes the session busy.
3981 16 No The transaction operation cannot be performed because there are pending requests working on this transaction.
3982 16 No New transaction is not allowed to be started while DTC or bound transaction is active.
3983 16 No The operation failed because the session is not single threaded.
3984 16 No Cannot acquire a database lock during a transaction change.
3985 16 No An error occurred during the changing of transaction context. This is usually caused by low memory in the system. Try to free up more memory.
3986 19 No The transaction timestamps ran out. Restart the server.
3987 10 No SNAPSHOT ISOLATION is always enabled in this database.
3988 16 No New transaction is not allowed because there are other threads running in the session.
3989 16 No New request is not allowed to start because it should come with valid transaction descriptor.
3990 16 No Transaction is not allowed to commit inside of a user defined routine, trigger or aggregate because the transaction is not started in that CLR level. Change application logic to enforce strict transaction nesting.
3991 16 No The context transaction which was active before entering user defined routine, trigger or aggregate "%.*ls" has been ended inside of it, which is not allowed. Change application logic to enforce strict transaction nesting.
3992 16 No Transaction count has been changed from %d to %d inside of user defined routine, trigger or aggregate "%.*ls". This is not allowed and user transaction will be rolled back. Change application logic to enforce strict transaction nesting.
3993 16 No The user transaction that has been started in user defined routine, trigger or aggregate "%.*ls" is not ended upon exiting from it. This is not allowed and the transaction will be rolled back. Change application logic to enforce strict transaction nesting.
3994 16 No User defined routine, trigger or aggregate tried to rollback a transaction that is not started in that CLR level. An exception will be thrown to prevent execution of rest of the user defined routine, trigger or aggregate.
3995 16 No Unknown transaction isolation level %d, valid value range is 0 to 5.
3996 16 No Snapshot isolation level is not supported for distributed transaction. Use another isolation level or do not use distributed transaction.
3997 16 No A transaction that was started in a MARS batch is still active at the end of the batch. The transaction is rolled back.
3998 16 No Uncommittable transaction is detected at the end of the batch. The transaction is rolled back.
3999 17 Yes Failed to flush the commit table to disk in dbid %d due to error %d. Check the errorlog for more information.
Error Severity Event logged Description
3001 16 No obsolete
3002 16 No Cannot BACKUP or RESTORE a database snapshot.
3003 10 No This BACKUP WITH DIFFERENTIAL will be based on more than one file backup. All those file backups must be restored before attempting to restore this differential backup.
3004 16 No The primary filegroup cannot be backed up as a file backup because the database is using the SIMPLE recovery model. Consider taking a partial backup by specifying READ_WRITE_FILEGROUPS.
3005 10 No The differential partial backup is including a read-only filegroup, '%ls'. This filegroup was read-write when the base partial backup was created, but was later changed to read-only access. We recommend that you create a separate file backup of the '%ls' filegroup now, and then create a new partial backup to provide a new base for later differential partial backups.
3006 16 No The differential backup is not allowed because it would be based on more than one base backup. Multi-based differential backups are not allowed in the simple recovery model, and are never allowed for partial differential backups.
3007 16 No The backup of the file or filegroup "%ls" is not permitted because it is not online. Container state: "%ls" (%d). Restore status: %d. BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data.
3008 16 No The specified device type is not supported for backup mirroring.
3009 16 No Could not insert a backup or restore history/detail record in the msdb database. This may indicate a problem with the msdb database. The backup/restore operation was still successful.
3010 16 No Invalid backup mirror specification. All mirrors must have the same number of members.
3011 16 No All backup devices must be of the same general class (for example, DISK and TAPE).
3012 17 No VDI ran out of buffer when SQL Server attempted to send differential information to SQL Writer.
3013 16 No %hs is terminating abnormally.
3014 10 No %hs successfully processed %I64d pages in %d.%03d seconds (%d.%03d MB/sec).
3015 10 No %hs is not yet implemented.
3016 16 No Backup of file '%ls' is not permitted because it contains pages subject to an online restore sequence. Complete the restore sequence before taking the backup, or restrict the backup to exclude this file.
3017 16 No The restart-checkpoint file '%ls' could not be opened. Operating system error '%ls'. Correct the problem, or reissue the command without RESTART.
3018 10 No The restart-checkpoint file '%ls' was not found. The RESTORE command will continue from the beginning as if RESTART had not been specified.
3019 16 No The restart-checkpoint file '%ls' is from a previous interrupted RESTORE operation and is inconsistent with the current RESTORE command. The restart command must use the same syntax as the interrupted command, with the addition of the RESTART clause. Alternatively, reissue the current statement without the RESTART clause.
3021 16 No Cannot perform a backup or restore operation within a transaction.
3022 10 No This backup is a file backup of read-write data from a database that uses the simple recovery model. This is only appropriate if you plan to set the filegroup to read-only followed by a differential file backup. Consult Books Online for more information on managing read-only data for the simple recovery model. In particular, consider how partial backups are used.
3023 16 No Backup, file manipulation operations (such as ALTER DATABASE ADD FILE) and encryption changes on a database must be serialized. Reissue the statement after the current backup or file manipulation operation is completed.
3024 16 No You can only perform a full backup of the master database. Use BACKUP DATABASE to back up the entire master database.
3025 16 No Missing database name. Reissue the statement specifying a valid database name.
3027 16 No The filegroup "%.*ls" is not part of database "%.*ls".
3028 10 No The restart-checkpoint file '%ls' was corrupted and is being ignored. The RESTORE command will continue from the beginning as if RESTART had not been specified.
3031 16 No Option '%ls' conflicts with option(s) '%ls'. Remove the conflicting option and reissue the statement.
3032 16 No One or more of the options (%ls) are not supported for this statement. Review the documentation for supported options.
3033 16 No BACKUP DATABASE cannot be used on a database opened in emergency mode.
3034 16 No No files were selected to be processed. You may have selected one or more filegroups that have no members.
3035 16 No Cannot perform a differential backup for database "%ls", because a current database backup does not exist. Perform a full database backup by reissuing BACKUP DATABASE, omitting the WITH DIFFERENTIAL option.
3036 16 No The database "%ls" is in warm-standby state (set by executing RESTORE WITH STANDBY) and cannot be backed up until the entire restore sequence is completed.
3038 16 No The file name "%ls" is invalid as a backup device name. Reissue the BACKUP statement with a valid file name.
3039 16 No Cannot perform a differential backup for file '%ls' because a current file backup does not exist. Reissue BACKUP DATABASE omitting the WITH DIFFERENTIAL option.
3040 10 No An error occurred while informing replication of the backup. The backup will continue, but the replication environment should be inspected.
3041 16 Yes BACKUP failed to complete the command %.*ls. Check the backup application log for detailed messages.
3042 10 No BACKUP WITH CONTINUE_AFTER_ERROR successfully generated a backup of the damaged database. Refer to the SQL Server error log for information about the errors that were encountered.
3043 16 No BACKUP '%ls' detected an error on page (%d:%d) in file '%ls'.
3044 16 No Invalid zero-length device name. Reissue the BACKUP statement with a valid device name.
3045 16 No BACKUP or RESTORE requires the NTFS file system for FILESTREAM and full-text support. The path "%.*ls" is not usable.
3046 16 No Inconsistent metadata has been encountered. The only possible backup operation is a tail-log backup using the WITH CONTINUE_AFTER_ERROR or NO_TRUNCATE option.
3047 16 No The BackupDirectory registry key is not configured correctly. This key should specify the root path where disk backup files are stored when full path names are not provided. This path is also used to locate restart checkpoint files for RESTORE.
3048 16 No BACKUP LOG WITH TRUNCATE_ONLY cannot operate on database '%ls' because it is configured for database mirroring.
3049 16 No BACKUP detected corruption in the database log. Check the errorlog for more information.
3050 16 No SQL Server could not send the differential information for database file '%ls' of database '%ls\%ls' to the backup application because the differential information is too large to fit in memory, and an attempt to use a temporary file has failed.
3051 16 No BACKUP LOG was unable to maintain mirroring consistency for database '%ls'. Database mirroring has been suspended.
3052 16 No BACKUP LOG was unable to log updates for for database '%ls'. Subsequent log backups will be required to advance the backup point from %S_LSN to %S_LSN after log space is made available for logging them.
3053 16 No BACKUP '%ls' detected an error on a page in file '%ls'.
3054 16 No Differential file backups can include only read-only data for databases using the simple recovery model. Consider taking a partial backup by specifying READ_WRITE_FILEGROUPS.
3055 16 No Backup destination "%.*ls" supports a FILESTREAM filegroup. This filegroup cannot be used as a backup destination. Rerun the BACKUP statement with a valid backup destination.
3056 16 No The backup operation has detected an unexpected file in a FILESTREAM container. The backup operation will continue and include file '%ls'.
3057 16 No Invalid device name. The length of the device name provided exceeds supported limit (maximum length is:%d). Reissue the BACKUP statement with a valid device name.
3058 10 No File or device name exceeds the supported limit (maximum length is:%d) and will be truncated: %.*ls.
3059 16 No This BACKUP or RESTORE command is not supported on a database mirror or secondary replica.
3060 10 No The restart-checkpoint file '%ls' was corrupted. The restored database can not be recovered. Restart the RESTORE sequence.
3061 16 No The restart-checkpoint file '%ls' could not be opened. Operating system error '%ls'. Make the file available and retry the operation or, restart the RESTORE sequence.
3062 16 No Cannot backup from a HADRON secondary because it is not in Synchronizing or Synchronized state.
3063 16 No Write to backup block blob device %ls failed. Device has reached its limit of allowed blocks.
3064 16 No Write to backup block blob detected out of order write at offset %ld, last block offset was at %ld.
3065 16 No Attempt to commit the block list for a block blob failed. Blob Name is "%.*ls". Storage Errorcode %ld.
3066 16 No Could not find the database file referenced by the file snapshot %.*ls. Please make sure that the URL points to a valid snapshot on a database file.
3067 16 No Failed while trying to delete file snapshot %.*ls. Error code %ld.
3068 16 No Invalid file snapshot URL. Please make sure that the URL is correctly formed.
3069 16 No Striping a backup set across multiple devices is not permitted for file snapshot backups.
3070 16 No Specifying the WITH options FORMAT and FILE_SNAPSHOT is not permitted.
3071 16 No The database %.*ls is configured for file snapshot point in time restore, log backups are not permitted.
3072 16 No Backup encryption is incompatible with file snapshot backup if TDE is not enabled on the database.
3073 16 No The option WITH FILE_SNAPSHOT is only permitted if all database files are in Azure Storage.
3074 16 No Failed while getting attributes for the file snapshot %.*ls. Error code %ld.
3075 16 No Device name '%.*ls' is not a valid MOVE target when restoring from a File Snapshot Backup.
3076 16 No File Snapshot Backup is only permitted with a single backup device and no additonal mirrored devices.
3077 10 No File snapshot %.*ls not found.
3078 16 No The file name "%ls" is invalid as a backup device name for the specified device type. Reissue the BACKUP statement with a valid file name and device type.
3095 16 No The backup cannot be performed because 'ENCRYPTION' was requested after the media was formatted with an incompatible structure. To append to this media set, either omit 'ENCRYPTION' or create a new media set by using WITH FORMAT in your BACKUP statement. If you use WITH FORMAT on an existing media set, all its backup sets will be overwritten.
3096 16 No The Certificate specified for backup encryption has expired.
3097 16 No The Backup cannot be performed because the existing media set is formatted with an incompatible version.
3098 16 No The backup cannot be performed because '%ls' was requested after the media was formatted with an incompatible structure. To append to this media set, either omit '%ls' or specify '%ls'. Alternatively, you can create a new media set by using WITH FORMAT in your BACKUP statement. If you use WITH FORMAT on an existing media set, all its backup sets will be overwritten.
3099 16 No Backup Encryption options were specified, Backup Encryption support has not been enabled on this version.
3101 16 No Exclusive access could not be obtained because the database is in use.
3102 16 No %ls cannot process database '%ls' because it is in use by this session. It is recommended that the master database be used when performing this operation.
3103 16 No A partial restore sequence cannot be initiated by this command. To initiate a partial restore sequence, use the WITH PARTIAL clause of the RESTORE statement and provide a backup set which includes a full copy of at least the primary data file. The WITH PARTIAL clause of the RESTORE statement may not be used for any other purpose.
3104 16 No RESTORE cannot operate on database '%ls' because it is configured for database mirroring or has joined an availability group. If you intend to restore the database, use ALTER DATABASE to remove mirroring or to remove the database from its availability group.
3105 16 No RESTORE cannot restore any more pages into file '%ls' because the maximum number of pages (%d) are already being restored. Either complete the restore sequence for the existing pages, or use RESTORE FILE to restore all pages in the file.
3106 16 No The filegroup "%ls" is ambiguous. The identity in the backup set does not match the filegroup that is currently defined in the online database. To force the use of the filegroup in the backup set, take the database offline and then reissue the RESTORE command.
3107 16 No The file "%ls" is ambiguous. The identity in the backup set does not match the file that is currently defined in the online database. To force the use of the file in the backup set, take the database offline and then reissue the RESTORE command.
3108 16 No To restore the master database, the server must be running in single-user mode. For information on starting in single-user mode, see "How to: Start an Instance of SQL Server (sqlservr.exe)" in Books Online.
3109 16 No Master can only be restored and fully recovered in a single step using a full database backup. Options such as NORECOVERY, STANDBY, and STOPAT are not supported.
3110 14 No User does not have permission to RESTORE database '%.*ls'.
3111 16 No Page %S_PGID is a control page which cannot be restored in isolation. To repair this page, the entire file must be restored.
3112 16 No Cannot restore any database other than master when the server is in single user mode.
3113 16 No Invalid data was detected.
3115 16 No The database is using the simple recovery model. It is not possible to restore a subset of the read-write data.
3116 16 No The supplied backup is not on the same recovery path as the database, and is ineligible for use for an online file restore.
3117 16 No The log or differential backup cannot be restored because no files are ready to rollforward.
3118 16 No The database "%ls" does not exist. RESTORE can only create a database when restoring either a full backup or a file backup of the primary file.
3119 16 No Problems were identified while planning for the RESTORE statement. Previous messages provide details.
3120 16 No This backup set will not be restored because all data has already been restored to a point beyond the time covered by this backup set.
3121 16 No The file "%ls" is on a recovery path that is inconsistent with application of this backup set. RESTORE cannot continue.
3122 16 No File initialization failed. RESTORE cannot continue.
3123 16 No Invalid database name '%.*ls' specified for backup or restore operation.
3125 16 No The database is using the simple recovery model. The data in the backup it is not consistent with the current state of the database. Restoring more data is required before recovery is possible. Either restore a full file backup taken since the data was marked read-only, or restore the most recent base backup for the target data followed by a differential file backup.
3126 16 No The file "%ls" was not relocated using a relative path during the RESTORE step. A relative location is required when restoring a database from a standalone instance to a matrix instance. Use the WITH MOVE option to specify a relative location for the file.
3127 16 Yes The file '%.*ls' of restored database '%ls' is being left in the defunct state because the database is using the simple recovery model and the file is marked for read-write access. Therefore, only read-only files can be recovered by piecemeal restore.
3128 16 No File '%ls' has an unsupported page size (%d).
3129 16 No The contents of the file "%ls" are not consistent with a transition into the restore sequence. A restore from a backup set may be required.
3130 10 No The filegroup "%ls" is selected. At the time of backup it was known by the name "%ls"'. RESTORE will continue operating upon the renamed filegroup.
3131 10 No The file "%ls" is selected. At the time of backup it was known by the name "%ls". RESTORE will continue operating upon the renamed file.
3132 16 No The media set has %d media families but only %d are provided. All members must be provided.
3133 16 No The volume on device "%ls" is sequence number %d of media family %d, but sequence number %d of media family %d is expected. Check that the device specifications and loaded media are correct.
3134 10 Yes The differential base attribute for file '%ls' of database '%ls' has been reset because the file has been restored from a backup taken on a conflicting recovery path. The restore was allowed because the file was read-only and was consistent with the current status of the database. Any future differential backup of this file will require a new differential base.
3135 16 No The backup set in file '%ls' was created by %hs and cannot be used for this restore operation.
3136 16 No This differential backup cannot be restored because the database has not been restored to the correct earlier state.
3137 16 No Database cannot be reverted. Either the primary or the snapshot names are improperly specified, all other snapshots have not been dropped, or there are missing files.
3138 16 No The database cannot be reverted because FILESTREAM BLOBs are present.
3139 16 No Restore to snapshot is not allowed with the master database.
3140 16 No Could not adjust the space allocation for file '%ls'.
3141 16 No The database to be restored was named '%ls'. Reissue the statement using the WITH REPLACE option to overwrite the '%ls' database.
3142 16 No File "%ls" cannot be restored over the existing "%ls". Reissue the RESTORE statement using WITH REPLACE to overwrite pre-existing files, or WITH MOVE to identify an alternate location.
3143 16 No The data set on device '%ls' is not a SQL Server backup set.
3144 16 No File '%.*ls' was not backed up in file %d on device '%ls'. The file cannot be restored from this backup set.
3145 16 No The STOPAT option is not supported for databases that use the SIMPLE recovery model.
3147 16 No Backup and restore operations are not allowed on database tempdb.
3148 16 No This RESTORE statement is invalid in the current context. The 'Recover Data Only' option is only defined for secondary filegroups when the database is in an online state. When the database is in an offline state filegroups cannot be specified.
3149 16 No The file or filegroup "%ls" is not in a valid state for the "Recover Data Only" option to be used. Only secondary files in the OFFLINE or RECOVERY_PENDING state can be processed.
3150 10 No The master database has been successfully restored. Shutting down SQL Server.
3151 21 Yes Failed to restore master database. Shutting down SQL Server. Check the error logs, and rebuild the master database. For more information about how to rebuild the master database, see SQL Server Books Online.
3153 16 No The database is already fully recovered.
3154 16 No The backup set holds a backup of a database other than the existing '%ls' database.
3155 16 No The RESTORE operation cannot proceed because one or more files have been added or dropped from the database since the backup set was created.
3156 16 No File '%ls' cannot be restored to '%ls'. Use WITH MOVE to identify a valid location for the file.
3159 16 No The tail of the log for the database "%ls" has not been backed up. Use BACKUP LOG WITH NORECOVERY to backup the log if it contains work you do not want to lose. Use the WITH REPLACE or WITH STOPAT clause of the RESTORE statement to just overwrite the contents of the log.
3161 16 No The primary file is unavailable. It must be restored or otherwise made available.
3163 16 No The transaction log was damaged. All data files must be restored before RESTORE LOG can be attempted.
3165 16 No Database '%ls' was restored, however an error was encountered while replication was being restored/removed. The database has been left offline. See the topic MSSQL_ENG003165 in SQL Server Books Online.
3166 16 No RESTORE DATABASE could not drop database '%ls'. Drop the database and then reissue the RESTORE DATABASE statement.
3167 16 No RESTORE could not start database '%ls'.
3168 16 No The backup of the system database on the device %ls cannot be restored because it was created by a different version of the server (%ls) than this server (%ls).
3169 16 No The database was backed up on a server running version %ls. That version is incompatible with this server, which is running version %ls. Either restore the database on a server that supports the backup, or use a backup that is compatible with this server.
3170 16 No The STANDBY filename is invalid.
3171 16 No File %ls is defunct and cannot be restored into the online database.
3172 16 No Filegroup %ls is defunct and cannot be restored into the online database.
3173 16 No The STOPAT clause provided with this RESTORE statement indicates that the tail of the log contains changes that must be backed up to reach the target point in time. The tail of the log for the database "%ls" has not been backed up. Use BACKUP LOG WITH NORECOVERY to back up the log, or use the WITH REPLACE clause in your RESTORE statement to overwrite the tail of the log.
3174 16 No The file '%ls' cannot be moved by this RESTORE operation.
3175 10 No RESTORE FILEGROUP="%ls" was specified, but not all of its files are present in the backup set. File "%ls" is missing. RESTORE will continue, but if you want all files to be restored, you must restore other backup sets.
3176 16 No File '%ls' is claimed by '%ls'(%d) and '%ls'(%d). The WITH MOVE clause can be used to relocate one or more files.
3178 16 No File %ls is not in the correct state to have this differential backup applied to it.
3179 16 No The system database cannot be moved by RESTORE.
3180 16 No This backup cannot be restored using WITH STANDBY because a database upgrade is needed. Reissue the RESTORE without WITH STANDBY.
3181 10 No Attempting to restore this backup may encounter storage space problems. Subsequent messages will provide details.
3182 16 No The backup set cannot be restored because the database was damaged when the backup occurred. Salvage attempts may exploit WITH CONTINUE_AFTER_ERROR.
3183 16 No RESTORE detected an error on page (%d:%d) in database "%ls" as read from the backup set.
3184 10 No RESTORE WITH CONTINUE_AFTER_ERROR was successful but some damage was encountered. Inconsistencies in the database are possible.
3185 16 No RESTORE cannot apply this backup set because the database is suspect. Restore a backup set that repairs the damage.
3186 16 No The backup set has been damaged. RESTORE will not attempt to apply this backup set.
3187 16 No RESTORE WITH CHECKSUM cannot be specified because the backup set does not contain checksum information.
3188 10 No The backup set was written with damaged data by a BACKUP WITH CONTINUE_AFTER_ERROR.
3189 16 No Damage to the backup set was detected.
3190 16 No Filegroup '%ls' cannot be restored because it does not exist in the backup set.
3191 16 No Restore cannot continue because file '%ls' cannot be written. Ensure that all files in the database are writable.
3192 10 No Restore was successful but deferred transactions remain. These transactions cannot be resolved because there are data that is unavailable. Either use RESTORE to make that data available or drop the filegroups if you never need this data again. Dropping the filegroup results in a defunct filegroup.
3193 16 No Restore Log operations are not permitted for a Log Backup with FILE_SNAPSHOT if bulk operations were present during the backup period. The Restore can be accomplished by issuing Restore Database from this archive.
3194 16 No Page %S_PGID is beyond the end of the file. Only pages that are in the current range of the file can be restored.
3195 16 No Page %S_PGID cannot be restored from this backup set. RESTORE PAGE can only be used from full backup sets or from the first log or differential backup taken since the file was added to the database.
3196 16 No RESTORE master WITH SNAPSHOT is not supported. To restore master from a snapshot backup, stop the service and copy the data and log file.
3197 10 Yes I/O is frozen on database %ls. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup.
3198 10 Yes I/O was resumed on database %ls. No user action is required.
3199 16 No RESTORE requires MAXTRANSFERSIZE=%u but %u was specified.
3201 16 No Cannot open backup device '%ls'. Operating system error %ls.
3202 16 No Write on "%ls" failed: %ls
3203 16 No Read on "%ls" failed: %ls
3204 16 No The backup or restore was aborted.
3205 16 No Too many backup devices specified for backup or restore; only %d are allowed.
3206 16 No Backup device '%.*ls' does not exist. To view existing backup devices, use the sys.backup_devices catalog view. To create a new backup device use either sp_addumpdevice or SQL Server Management Studio.
3207 16 No Backup or restore requires at least one backup device. Rerun your statement specifying a backup device.
3208 16 No Unexpected end of file while reading beginning of backup set. Confirm that the media contains a valid SQL Server backup set, and see the console error log for more details.
3209 16 No Operation is not supported on user instances.
3210 16 No The mirror member in drive "%ls" is inconsistent with the mirror member in drive "%ls".
3211 10 No %d percent processed.
3212 16 No The mirror device "%ls" and the mirror device "%ls" have different device specifications.
3213 16 No Unable to unload one or more tapes. See the error log for details.
3214 16 No Too many backup mirrors are specified. Only %d are allowed.
3215 16 No Use WITH FORMAT to create a new mirrored backup set.
3216 16 No RESTORE REWINDONLY is only applicable to tape devices.
3217 16 No Invalid value specified for %ls parameter.
3218 16 No Backup mirroring is not available in this edition of SQL Server. See Books Online for more details on feature support in different SQL Server editions.
3219 16 No The file or filegroup "%.*ls" cannot be selected for this operation.
3220 16 No The specified URL points to a Block Blob. Backup and Restore operations on Block Blobs are not supported when WITH CREDENTIAL syntax is used.
3221 16 No The ReadFileEx system function executed on file '%ls' only read %d bytes, expected %d.
3222 16 No The WriteFileEx system function executed on file '%ls' only wrote %d bytes, expected %d.
3223 16 No Backup To URL failed to write status messages to the operating system error log.
3224 16 No Cannot create worker thread.
3225 16 No Use of WITH CREDENTIAL syntax is not valid for credentials containing a Shared Access Signature.
3226 16 No Failed to create snapshot for file "%ls".
3227 16 No The backup media on "%ls" is part of media family %d which has already been processed on "%ls". Ensure that backup devices are correctly specified. For tape devices, ensure that the correct volumes are loaded.
3228 16 No Writing snapshot metadata to backup set for file "%ls" failed due to invalid format.
3229 16 No Request for device '%ls' timed out.
3230 16 No Operation on device '%ls' exceeded retry count.
3231 16 No The media loaded on "%ls" is formatted to support %d media families, but %d media families are expected according to the backup device specification.
3232 16 No The volume mounted on "%ls" does not have the expected backup set identity. The volume may be obsolete due to a more recent overwrite of this media family. In that case, locate the correct volume with sequence number %d of media family %d.
3234 16 No Logical file '%.*ls' is not part of database '%ls'. Use RESTORE FILELISTONLY to list the logical file names.
3235 16 No The file "%.*ls" is not part of database "%ls". You can only list files that are members of this database.
3238 16 No The Estimate for the Backup size exceeds the maximum allowed file size on the remote endpoint.
3239 16 No The backup set on device '%ls' uses a feature of the Microsoft Tape Format not supported by SQL Server.
3240 16 No Backup to mirrored media sets requires all mirrors to append. Provide all members of the set, or reformat a new media set.
3241 16 No The media family on device '%ls' is incorrectly formed. SQL Server cannot process this media family.
3242 16 No The file on device '%ls' is not a valid Microsoft Tape Format backup set.
3243 16 No The media family on device '%ls' was created using Microsoft Tape Format version %d.%d. SQL Server supports version %d.%d.
3244 16 No Descriptor block size exceeds %d bytes. Use a shorter name and/or description string and retry the operation.
3245 16 No Could not convert a string to or from Unicode, %ls.
3246 16 No The media family on device '%ls' is marked as nonappendable. Reissue the statement using the INIT option to overwrite the media.
3247 16 No The volume on device '%ls' has the wrong media sequence number (%d). Remove it and insert volume %d.
3249 16 No The volume on device '%ls' is a continuation volume for the backup set. Remove it and insert the volume holding the start of the backup set.
3250 16 No The value '%d' is not within range for the %ls parameter.
3251 10 No The media family on device '%ls' is complete. The device is now being reused for one of the remaining families.
3252 16 No Failed to copy snapshot with name '%ls', timestamp '%ls' to destination '%ls'. Error returned '%ls'.
3253 16 No The block size parameter must supply a value that is a power of 2.
3254 16 No The volume on device '%ls' is empty.
3255 16 No The data set on device '%ls' is a SQL Server backup set not compatible with this version of SQL Server.
3256 16 No The backup set on device '%ls' was terminated while it was being created and is incomplete. RESTORE sequence is terminated abnormally.
3257 16 No There is insufficient free space on disk volume '%ls' to create the database. The database requires %I64u additional free bytes, while only %I64u bytes are available.
3258 16 No The volume on the device "%ls" is not part of the media set that is currently being processed. Ensure that the backup devices are loaded with the correct media.
3259 16 No Failed to copy blob with name '%ls', to destination '%ls'. Error returned '%ls'.
3260 16 No An internal buffer has become full.
3261 16 No SQL Server cannot use the virtual device configuration.
3262 10 No The backup set on file %d is valid.
3263 16 No Cannot use the volume on device '%ls' as a continuation volume. It is sequence number %d of family %d for the current media set. Insert a new volume, or sequence number %d of family %d for the current set.
3264 16 No The operation did not proceed far enough to allow RESTART. Reissue the statement without the RESTART qualifier.
3265 16 No The login has insufficient authority. Membership of the sysadmin role is required to use VIRTUAL_DEVICE with BACKUP or RESTORE.
3266 16 Yes The backup data at the end of "%ls" is incorrectly formatted. Backup sets on the media might be damaged and unusable. To determine the backup sets on the media, use RESTORE HEADERONLY. To determine the usability of the backup sets, run RESTORE VERIFYONLY. If all of the backup sets are incomplete, reformat the media using BACKUP WITH FORMAT, which destroys all the backup sets.
3267 16 No Insufficient resources to create UMS scheduler.
3268 16 No Cannot use the backup file '%ls' because it was originally formatted with sector size %d and is now on a device with sector size %d.
3269 16 No Cannot restore the file '%ls' because it was originally written with sector size %d; '%ls' is now on a device with sector size %d.
3270 16 No An internal consistency error has occurred. This error is similar to an assert. Contact technical support for assistance.
3271 16 No A nonrecoverable I/O error occurred on file "%ls:" %ls.
3272 16 No The '%ls' device has a hardware sector size of %d, but the block size parameter specifies an incompatible override value of %d. Reissue the statement using a compatible block size.
3273 16 No The BUFFERCOUNT parameter must supply a value that allows at least one buffer per backup device.
3276 16 No WITH SNAPSHOT can be used only if the backup set was created WITH SNAPSHOT.
3277 16 No WITH SNAPSHOT must be used with only one virtual device.
3278 16 No Failed to encrypt string %ls
3279 16 No Access is denied due to a password failure
3280 16 No Backups on raw devices are not supported. '%ls' is a raw device.
3281 10 No Released and initiated rewind on '%ls'.
3283 16 No The file "%ls" failed to initialize correctly. Examine the error logs for more details.
3284 16 No Filemark on device '%ls' is not aligned. Re-issue the Restore statement with the same blocksize used to create the backupset: '%d' looks like a possible value.
3285 10 No Filemark on device '%ls' appears not to be aligned. The restore operation will proceed using less efficient I/O. To avoid this, re-issue the Restore statement with the same blocksize used to create the backupset: '%d' looks like a possible value.
3286 16 No Backup failed because there is a mismatch in file metadata for file %d.
3287 16 No The file ID %d on device '%ls' is incorrectly formed and can not be read.
3288 16 No Credential name %.*ls does not exist or user does not have permission to access it.
3289 16 No A Backup device of type URL was specified without a Credential, Backup/Restore operation cannot proceed.
3290 16 No Backup to URL received an exception from the remote endpoint. Exception Message: %.*ls
3291 16 No URL device type was specified, and a disallowed option %ls was specified.
3292 16 No A failure occurred while attempting to execute Backup or Restore with a URL device specified. Consult the operating system error log for details.
3293 16 No An error occurred while Backup/Restore to URL was initializing. Error message: %.*ls.
3294 16 No Use of the URL device type is limited to a single device during Backup and Restore operations.
3295 16 No Backup To URL error: Exclusive access to the file %.*ls could not be obtained.
3296 16 No The file %.*ls exists on the remote endpoint, and WITH FORMAT was not specified. Backup cannot proceed.
3297 16 No The URL provided does not meet specified requirements. The URL must be either resolvable as an absolute or relative URI, has or can be composed as an HTTP or HTTPS scheme, and cannot contain a query component.
3298 16 No Backup/Restore to URL device error: %.*ls.
3299 16 No BackupToUrl initiated.
3301 21 Yes The transaction log contains a record (logop %d) that is not valid. The log has been corrupted. Restore the database from a full backup, or repair the database.
3302 21 Yes Redoing of logged operations in database '%.*ls' failed to reach end of log at log record ID %S_LSN. This indicates corruption around log record ID %S_LSN. Restore the database from a full backup, or repair the database.
3303 10 Yes Remote harden of transaction '%.*ls' (ID 0x%016I64x %ls) started at %S_DATE in database '%ls' at LSN %S_LSN failed.
3313 21 Yes During redoing of a logged operation in database '%.*ls', an error occurred at log record ID %S_LSN. Typically, the specific failure is previously logged as an error in the operating system error log. Restore the database from a full backup, or repair the database.
3314 21 Yes During undoing of a logged operation in database '%.*ls', an error occurred at log record ID %S_LSN. Typically, the specific failure is logged previously as an error in the operating system error log. Restore the database or file from a backup, or repair the database.
3315 21 Yes During rollback, the following process did not hold an expected lock: process %d with mode %d at level %d for row %S_RID in database '%.*ls' under transaction %S_XID. Restore a backup of the database, or repair the database.
3316 21 Yes During undo of a logged operation in database '%.*ls', an error occurred at log record ID %S_LSN. The row was not found. Restore the database from a full backup, or repair the database.
3401 10 Yes Errors occurred during recovery while rolling back a transaction. The transaction was deferred. Restore the bad page or file, and re-run recovery.
3402 10 Yes The database '%ls' is marked %ls and is in a state that does not allow recovery to be run.
3403 10 Yes Recovering only master database because traceflag 3608 was specified. This is an informational message only. No user action is required.
3404 10 Yes Failed to check for new installation or a renamed server at startup. The logic for this check has failed unexpectedly. Run setup again, or fix the problematic registry key.
3406 10 Yes %d transactions rolled forward in database '%.*ls' (%d:%d). This is an informational message only. No user action is required.
3407 10 Yes %d transactions rolled back in database '%.*ls' (%d:%d). This is an informational message only. No user action is required.
3408 10 Yes Recovery is complete. This is an informational message only. No user action is required.
3409 16 Yes Performance counter shared memory setup failed with error %d. Reinstall sqlctr.ini for this instance, and ensure that the instance login account has correct registry permissions.
3410 10 Yes Data in filegroup %s is offline, and deferred transactions exist. Use RESTORE to recover the filegroup, or drop the filegroup if you never intend to recover it. Log truncation cannot occur until this condition is resolved.
3411 21 Yes Configuration block version %d is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
3412 10 Yes Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically. After the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
3413 21 Yes Database ID %d. Could not mark database as suspect. Getnext NC scan on sys.databases.database_id failed. Refer to previous errors in the error log to identify the cause and correct any associated problems.
3414 10 Yes An error occurred during recovery, preventing the database '%ls' (%d:%d) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
3415 16 Yes Database '%.*ls' cannot be upgraded because it is read-only, has read-only files or the user does not have permissions to modify some of the files. Make the database or files writeable, and rerun recovery.
3416 16 Yes The server contains read-only files that must be made writable before the server can be recollated.
3417 21 Yes Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
3418 10 Yes Recovery is unable to defer error %d. Errors can only be deferred in databases using the full recovery model and an active backup log chain.
3419 16 Yes Recovery for database '%.*ls' is being skipped because it requires an upgrade but is marked for Standby. Use RESTORE DATABASE WITH NORECOVERY to take the database back to a Restoring state and continue the restore sequence.
3420 21 Yes Database snapshot '%ls' has failed an IO operation and is marked suspect. It must be dropped and recreated.
3421 10 Yes Recovery completed for database %ls (database ID %d) in %I64d second(s) (analysis %I64d ms, redo %I64d ms, undo %I64d ms.) This is an informational message only. No user action is required.
3422 10 Yes Database %ls was shutdown due to error %d in routine '%hs'. Restart for non-snapshot databases will be attempted after all connections to the database are aborted.
3429 10 Yes Recovery could not determine the outcome of a cross-database transaction %S_XID, named '%.*ls', in database '%.*ls' (database ID %d:%d). The coordinating database (database ID %d:%d) was unavailable. The transaction was assumed to be committed. If the transaction was not committed, you can retry recovery when the coordinating database is available.
3431 21 Yes Could not recover database '%.*ls' (database ID %d) because of unresolved transaction outcomes. Microsoft Distributed Transaction Coordinator (MS DTC) transactions were prepared, but MS DTC was unable to determine the resolution. To resolve, either fix MS DTC, restore from a full backup, or repair the database.
3434 20 Yes Cannot change sort order or locale. An unexpected failure occurred while trying to reindex the server to a new collation. SQL Server is shutting down. Restart SQL Server to continue with the sort order unchanged. Diagnose and correct previous errors and then retry the operation.
3437 21 Yes An error occurred while recovering database '%.*ls'. Unable to connect to Microsoft Distributed Transaction Coordinator (MS DTC) to check the completion status of transaction %S_XID. Fix MS DTC, and run recovery again.
3441 21 Yes During startup of warm standby database '%.*ls' (database ID %d), its standby file ('%ls') was inaccessible to the RESTORE statement. The operating system error was '%ls'. Diagnose the operating system error, correct the problem, and retry startup.
3443 21 Yes Database '%ls' (database ID %d:%d) was marked for standby or read-only use, but has been modified. The RESTORE LOG statement cannot be performed. Restore the database from a backup.
3445 21 Yes File '%ls' is not a valid undo file for database '%.*ls (database ID %d). Verify the file path, and specify the correct file.
3446 16 No Primary log file is not available for database '%ls' (%d:%d). The log cannot be backed up.
3447 16 No Could not activate or scan all of the log files for database '%.*ls'.
3448 21 Yes Rollback encountered a page with a log sequence number (LSN) less than the original log record LSN. Could not undo log record %S_LSN, for transaction ID %S_XID, on page %S_PGID, database '%ls' (%d:%d). Page information: LSN = %S_LSN, type = %ld. Log information: OpCode = %ld, context %ld. Restore or repair the database.
3449 21 Yes SQL Server must shut down in order to recover a database (database ID %d). The database is either a user database that could not be shut down or a system database. Restart SQL Server. If the database fails to recover after another startup, repair or restore the database.
3450 10 Yes Recovery of database '%.*ls' (%d) is %d%% complete (approximately %d seconds remain). Phase %d of 3. This is an informational message only. No user action is required.
3452 10 Yes Recovery of database '%.*ls' (%d) detected possible identity value inconsistency in table ID %d. Run DBCC CHECKIDENT ('%.*ls').
3453 16 No This version cannot redo any index creation or non-logged operation done by SQL Server 7.0. Further roll forward is not possible.
3454 10 Yes Recovery is writing a checkpoint in database '%.*ls' (%d). This is an informational message only. No user action is required.
3456 21 Yes Could not redo log record %S_LSN, for transaction ID %S_XID, on page %S_PGID, allocation unit %I64d, database '%.*ls' (database ID %d). Page: LSN = %S_LSN, allocation unit = %I64d, type = %ld. Log: OpCode = %ld, context %ld, PrevPageLSN: %S_LSN. Restore from a backup of the database, or repair the database.
3457 21 Yes Transactional file system resource manager '%.*ls' failed to recover. For more information, see the accompanying error message, which determines the appropriate user action.
3458 16 No Recovery cannot scan database "%.*ls" for dropped allocation units because an unexpected error has occurred. These allocation units cannot be cleaned up.
3459 16 No Recovery of database "%.*ls" failed to redo a file add for file "%.*ls". Please delete the file and retry.
3460 21 Yes Failed to shutdown a database (database ID %d) that contains memory-optimized data. Restart SQL Server to bring the database to a consistent state. If the database fails to recover after restart, repair or restore the database.
3461 21 Yes Failed to wait for XTP %ls to complete during recovery.
3505 14 No Only the owner of database "%.*ls" or someone with relevant permissions can run the CHECKPOINT statement.
3604 10 No Duplicate key was ignored.
3605 16 No Schema verification failed for database '%.*ls'.
3606 10 No Arithmetic overflow occurred.
3607 10 No Division by zero occurred.
3608 16 No Cannot allocate a GUID for the token.
3609 16 No The transaction ended in the trigger. The batch has been aborted.
3611 10 No %hs SQL Server Execution Times:%hs CPU time not measured under fiber mode, elapsed time = %lu ms.
3612 10 No %hs SQL Server Execution Times:%hs CPU time = %lu ms, elapsed time = %lu ms.
3613 10 No SQL Server parse and compile time: %hs CPU time = %lu ms, elapsed time = %lu ms.
3615 10 No Table '%.*ls'. Scan count %d, logical reads %d, physical reads %d, read-ahead reads %d, lob logical reads %d, lob physical reads %d, lob read-ahead reads %d.
3616 16 No An error was raised during trigger execution. The batch has been aborted and the user transaction, if any, has been rolled back.
3619 10 Yes Could not write a checkpoint record in database %ls because the log is out of space. Contact the database administrator to truncate the log or allocate more space to the database log files.
3620 10 Yes Automatic checkpointing is disabled in database '%.*ls' because the log is out of space. Automatic checkpointing will be enabled when the database owner successfully checkpoints the database. Contact the database owner to either truncate the log file or add more disk space to the log. Then retry the CHECKPOINT statement.
3621 10 No The statement has been terminated.
3622 10 No Warning: An invalid floating point operation occurred.
3623 16 No An invalid floating point operation occurred.
3624 20 Yes A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a Hotfix from Technical Support.
3625 20 Yes '%hs' is not yet implemented.
3627 17 Yes New parallel operation cannot be started due to too many parallel operations executing at this time. Use the "max worker threads" configuration option to increase the number of allowable threads, or reduce the number of parallel operations running on the system.
3628 24 Yes The Database Engine received a floating point exception from the operating system while processing a user request. Try the transaction again. If the problem persists, contact your system administrator.
3633 16 Yes The operating system returned the error '%ls' while attempting '%ls' on '%ls' at '%hs'(%d).
3634 16 Yes The operating system returned the error '%ls' while attempting '%ls' on '%ls'.
3635 16 Yes An error occurred while processing '%ls' metadata for database id %d, file id %d, and transaction='%.*ls'. Additional Context='%ls'. Location='%hs'(%d). Retry the operation; if the problem persists, contact the database administrator to review locking and memory configurations. Review the application for possible deadlock conflicts.
3636 16 No An error occurred while processing '%ls' metadata for database id %d file id %d.
3637 16 No A parallel operation cannot be started from a DAC connection.
3641 10 No Total logical reads %lu, physical reads %lu, writes %lu.
3642 10 No Table '%.*ls'. Segment reads %u, segment skipped %u.
3643 16 No The operation elapsed time exceeded the maximum time specified for this operation. The execution has been stopped.
3701 11 No Cannot %S_MSG the %S_MSG '%.*ls', because it does not exist or you do not have permission.
3702 16 No Cannot drop database "%.*ls" because it is currently in use.
3703 16 No Cannot detach the %S_MSG '%.*ls' because it is currently in use.
3705 16 No Cannot use DROP %ls with '%.*ls' because '%.*ls' is a %S_MSG. Use %ls.
3706 16 No Cannot %S_MSG a database snapshot.
3707 16 No Cannot detach a suspect or recovery pending database. It must be repaired or dropped.
3708 16 No Cannot %S_MSG the %S_MSG '%.*ls' because it is a system %S_MSG.
3709 16 No Cannot %S_MSG the database while the database snapshot "%.*ls" refers to it. Drop that database first.
3710 16 No Cannot detach an opened database when the server is in minimally configured mode.
3716 16 No The %S_MSG '%.*ls' cannot be dropped because it is bound to one or more %S_MSG.
3717 16 No Cannot drop a default constraint by DROP DEFAULT statement. Use ALTER TABLE to drop a constraint default.
3718 11 No Could not drop index '%.*ls' because the table or clustered index entry cannot be found in the sysindexes system table.
3721 16 No Type '%.*ls' cannot be renamed because it is being referenced by object '%.*ls'.
3723 16 No An explicit DROP INDEX is not allowed on index '%.*ls'. It is being used for %ls constraint enforcement.
3724 16 No Cannot %S_MSG the %S_MSG '%.*ls' because it is being used for replication.
3725 16 No The constraint '%.*ls' is being referenced by table '%.*ls', foreign key constraint '%.*ls'.
3726 16 No Could not drop object '%.*ls' because it is referenced by a FOREIGN KEY constraint.
3727 10 No Could not drop constraint. See previous errors.
3728 16 No '%.*ls' is not a constraint.
3729 16 No Cannot %ls '%.*ls' because it is being referenced by object '%.*ls'.
3730 16 No Cannot drop the default constraint '%.*ls' while it is being used by a foreign key as SET DEFAULT referential action.
3732 16 No Cannot drop type '%.*ls' because it is being referenced by object '%.*ls'. There may be other objects that reference this type.
3733 16 No Constraint '%.*ls' does not belong to table '%.*ls'.
3734 16 No Could not drop the primary key constraint '%.*ls' because the table has an XML or spatial index.
3735 16 No The primary key constraint '%.*ls' on table '%.*ls' cannot be dropped because change tracking is enabled on the table. Change tracking requires a primary key constraint on the table. Disable change tracking before dropping the constraint.
3736 16 No Cannot drop the %S_MSG '%.*ls' because it is being used for distribution.
3737 16 No Could not delete file '%ls'. See the SQL Server error log for more information.
3738 10 No Deleting database file '%ls'.
3739 11 No Cannot %ls the index '%.*ls' because it is not a statistics collection.
3740 16 No Cannot drop the %S_MSG '%.*ls' because at least part of the table resides on a read-only filegroup.
3741 16 No Cannot drop the %S_MSG '%.*ls' because at least part of the table resides on an offline filegroup.
3743 16 No The database '%.*ls' is enabled for database mirroring. Database mirroring must be removed before you drop the database.
3744 16 No Only a single clause is allowed in a statement where an index is dropped online.
3745 16 No Only a clustered index can be dropped online.
3746 16 No Cannot drop the clustered index of view '%.*ls' because the view is being used for replication.
3747 16 No Cannot drop a clustered index created on a view using drop clustered index clause. Clustered index '%.*ls' is created on view '%.*ls'.
3748 16 No Cannot drop non-clustered index '%.*ls' using drop clustered index clause.
3749 16 No Cannot drop XML Index '%.*ls' using old 'Table.Index' syntax, use 'Index ON Table' syntax instead.
3750 10 No Warning: Index '%.*ls' on %S_MSG '%.*ls' was disabled as a result of disabling the clustered index on the %S_MSG.
3751 16 No Cannot use SP_DROPEXTENDEDPROC or DBCC DROPEXTENDEDPROC with '%.*ls' because '%.*ls' is a %S_MSG. Use %ls.
3752 16 No The database '%.*ls' is currently joined to an availability group. Before you can drop the database, you need to remove it from the availability group.
3753 16 No Cannot %S_MSG the federation member '%.*ls', because the federation root does not exist.
3754 16 No TRUNCATE TABLE statement failed. Index '%.*ls' uses partition function '%.*ls', but table '%.*ls' uses non-equivalent partition function '%.*ls'. Index and table must use an equivalent partition function.
3755 16 No Cannot drop a database with file snapshots on it. Please detach the database instead of dropping or delete the file snapshots and retry the drop.
3756 16 No TRUNCATE TABLE statement failed. Index '%.*ls' is not partitioned, but table '%.*ls' uses partition function '%.*ls'. Index and table must use an equivalent partition function.
3757 16 No WAIT_AT_LOW_PRIORITY clause is not permitted without ONLINE = ON option, for drop clustered %S_MSG '%.*ls' on Table '%.*ls'.
3758 16 No Multiple %S_MSG cannot be dropped when WAIT_AT_LOW_PRIORITY clause is specified.
3759 16 No %.*ls constraint '%.*ls' cannot be dropped when WAIT_AT_LOW_PRIORITY clause is used.
3760 16 No Cannot drop index '%.*ls' on view '%.*ls' that has SNAPSHOT_MATERIALIZATION.
3800 16 No Column name '%.*ls' is not sufficiently different from the names of other columns in the table '%.*ls'.
3801 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" may be impacted by the collation upgrade. Run DBCC CHECKTABLE.
3802 10 No Warning: The constraint "%.*ls" on "%.*ls"."%.*ls" may be impacted by the collation upgrade. Disable and enable WITH CHECK.
3803 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" is disabled because the implementation of the checksum function has changed.
3804 10 No Warning: The check constraint "%.*ls" on table "%.*ls"."%.*ls" is disabled because the implementation of the checksum function has changed.
3805 10 No Warning: Index "%.*ls" on table "%.*ls"."%.*ls" might be corrupted because it references computed column "%.*ls" containing a non-deterministic conversion from string to date. Run DBCC CHECKTABLE to verify index. Consider using explicit CONVERT with deterministic date style such as 121. Computed column indexes referencing non-deterministic expressions can't be created in 90 compatibility mode. See Books Online topic "Creating Indexes on Computed Columns" for more information.
3806 10 No Warning: Indexed view "%.*ls"."%.*ls" might be corrupted because it contains a non-deterministic conversion from string to date. Run DBCC CHECKTABLE to verify view. Consider using explicit CONVERT with deterministic date style such as 121. Indexed views referencing non-deterministic expressions can't be created in 90 compatibility mode. See Books Online topic "Creating Indexed Views" for more information.
3807 17 No Create failed because all available identifiers have been exhausted.
3808 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" is disabled because the index is defined on a view with ignore_dup_key index option. Drop the index and, if possible, recreate it without ignore_dup_key option. You may need to change the logical structure of the view to ensure all rows are unique.
3809 16 No Upgrade of database "%.*ls" failed because index "%.*ls" on object ID %d has the same name as that of another index on the same table.
3810 10 No Event notification "%.*ls" on assembly is dropped.
3811 10 No Event notification "%.*ls" on service queue is dropped as broker instance is not specified.
3812 10 No Event notification "%.*ls" on object is dropped.
3813 16 No Upgrade of login '%.*ls' failed because its name or sid is a duplicate of another login or server role.
3814 16 No Local login mapped to remote login '%.*ls' on server '%.*ls' is invalid. Drop and recreate the remote login before upgrade.
3815 16 No Local login mapped to linked login '%.*ls' on server '%.*ls' is invalid. Drop and recreate the linked login before upgrade.
3816 16 No Upgrade of login '%.*ls' failed because its password hash is invalid. Update the login password before upgrade.
3817 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" was disabled because the implementation of "%.*ls" have changed.
3818 20 No Invalid or unexpected message received.
3819 10 No Warning: The check constraint "%.*ls" on "%.*ls"."%.*ls" was disabled and set as not trusted because the implementation of "%.*ls" have changed.
3821 10 No Warning: The foreign key constraint "%.*ls" on "%.*ls"."%.*ls" was disabled because the implementation of '%.*ls' have changed.
3822 10 No Warning: The heap "%.*ls"."%.*ls" has persisted computed columns that depends on a geometry or geography methods and may contain out-of-date information. Because of this, DBCC may report inconsistencies on this table. The persisted computed columns depending on geometry or geography methods should be unpersisted and persisted again to refresh the data.
3823 10 No Warning: The object "%.*ls"."%.*ls" could not be bound and was ignored during upgrade. Consider reviewing and correcting its definition.
3824 16 No Invalid partition fragment map is specified.
3827 10 No Warning: The table "%.*ls"."%.*ls" is unavailable because it contains a persisted computed column that depends on "%.*ls", the implementation of which has changed. Rebuild the table offline and reconstruct the persisted computed column.
3828 10 No Metadata cache entry %d:%d in database ID(%d) does not match between brick ID %d and %d.
3829 10 No Metadata cache entry %d:%d in database ID(%d) is not checked for coherency due to lock timeout.
3830 10 No Metadata cache coherency check for database ID(%d) did not find any inconsistency.
3851 10 No An invalid row (%ls) was found in the system table sys.%ls%ls.
3852 10 No Row (%ls) in sys.%ls%ls does not have a matching row (%ls) in sys.%ls%ls.
3853 10 No Attribute (%ls) of row (%ls) in sys.%ls%ls does not have a matching row (%ls) in sys.%ls%ls.
3854 10 No Attribute (%ls) of row (%ls) in sys.%ls%ls has a matching row (%ls) in sys.%ls%ls that is invalid.
3855 10 No Attribute (%ls) exists without a row (%ls) in sys.%ls%ls.
3856 10 No Attribute (%ls) exists but should not for row (%ls) in sys.%ls%ls.
3857 10 No The attribute (%ls) is required but is missing for row (%ls) in sys.%ls%ls.
3858 10 No The attribute (%ls) of row (%ls) in sys.%ls%ls has an invalid value.
3859 10 No Warning: The system catalog was updated directly in database ID %d, most recently at %S_DATE.
3860 10 No Cannot upgrade database ID 32767. This ID value is reserved for SQL Server internal use.
3862 10 No CLR type '%.*ls'.'%.*ls' is disabled because the on disk format for this CLR type has been changed. Use DROP TYPE to remove this disabled type.
3864 23 Yes Could not find an entry for index with ID %d on object with ID %d in database with ID %d. Possible schema corruption. Run DBCC CHECKDB.
3865 16 No The operation on object '%.*ls' is blocked. The object is a FileTable system defined object and user modifications are not allowed.
3866 10 Yes The operation on FileTable system defined object '%.*ls' was allowed because of traceflag settings. To prevent this informational message from appearing in the error log, use DBCC TRACEOFF to turn off the trace flag.
3867 10 No The FileTable object '%.*ls' contains system defined constraints that cannot be modified as long as the FILETABLE_NAMESPACE option is enabled on the table. Only user defined constraints have been updated.
3901 16 No The transaction name must be specified when it is used with the mark option.
3902 16 No The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.
3903 16 No The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION.
3904 21 No Cannot unsplit logical page %S_PGID in object '%.*ls', in database '%.*ls'. Both pages together contain more data than will fit on one page.
3906 16 No Failed to update database "%.*ls" because the database is read-only.
3908 16 No Could not run BEGIN TRANSACTION in database '%.*ls' because the database is in emergency mode or is damaged and must be restarted.
3909 16 No Session binding token is invalid.
3910 16 No Transaction context in use by another session.
3912 16 No Cannot bind using an XP token while the server is not in an XP call.
3913 16 Yes TDS reset connection protocol error. Client driver requested both ResetConnectionKeepLocalXact and ResetConnectionKeepDTCXact at the same time. This is not expected in server.
3914 16 No The data type "%s" is invalid for transaction names or savepoint names. Allowed data types are char, varchar, nchar, varchar(max), nvarchar, and nvarchar(max).
3915 16 No Cannot use the ROLLBACK statement within an INSERT-EXEC statement.
3916 16 No Cannot use the COMMIT statement within an INSERT-EXEC statement unless BEGIN TRANSACTION is used first.
3917 16 No Session is bound to a transaction context that is in use. Other statements in the batch were ignored.
3918 16 No The statement or function must be executed in the context of a user transaction.
3919 16 No Cannot enlist in the transaction because the transaction has already been committed or rolled back.
3920 10 No The WITH MARK option only applies to the first BEGIN TRAN WITH MARK statement. The option is ignored.
3921 16 No Cannot get a transaction token if there is no transaction active. Reissue the statement after a transaction has been started
3922 16 No Cannot enlist in the transaction because the transaction does not exist.
3923 10 No Cannot use transaction marks on database '%.*ls' with bulk-logged operations that have not been backed up. The mark is ignored.
3924 10 No The session was enlisted in an active user transaction while trying to bind to a new transaction. The session has defected from the previous user transaction.
3925 16 No Invalid transaction mark name. The 'LSN:' prefix is reserved.
3926 10 No The transaction active in this session has been committed or aborted by another session.
3927 10 No The session had an active transaction when it tried to enlist in a Distributed Transaction Coordinator transaction.
3928 16 No The marked transaction "%.*ls" failed. A timeout occurred while attempting to place a mark in the log by committing the marked transaction. This can be caused by contention with Microsoft Distributed Transaction Coordinator (MS DTC) transactions or other local marked transaction that have prepared, but not committed or aborted. Try the operation again and if the error persists, determine the source of the contention.
3929 16 No No distributed or bound transaction is allowed in single user database.
3930 16 No The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.
3931 16 No The current transaction cannot be committed and cannot be rolled back to a savepoint. Roll back the entire transaction.
3932 16 No The save point name "%.*ls" that was provided is too long. The maximum allowed length is %d characters.
3933 16 No Cannot promote the transaction to a distributed transaction because there is an active save point in this transaction.
3934 14 No The current user cannot use this FILESTREAM transaction context. To obtain a valid FILESTREAM transaction context, use GET_FILESTREAM_TRANSACTION_CONTEXT.
3935 16 No A FILESTREAM transaction context could not be initialized. This might be caused by a resource shortage. Retry the operation. Error code: 0x%x.
3936 16 No The transaction could not be committed because an error occurred while tyring to flush FILESTREAM data to disk. A file may have been open at commit time or a disk I/O error may have occurred. '%.*ls' was one of the one or more files involved. ErorrCode: 0x%x
3937 16 No While rolling back a transaction, an error occurred while trying to deliver a rollback notification to the FILESTREAM filter driver. Error code: 0x%0x.
3938 18 No The transaction has been stopped because it conflicted with the execution of a FILESTREAM close operation using the same transaction. The transaction will be rolled back.
3939 16 No An uncommittable transaction was detected at the beginning of the batch. The transaction was rolled back. This was caused by an error that occurred during the processing of a FILESTREAM request in the context of this transaction.
3940 16 No Failed to acquire necessary locks during commit and the transaction was rolled back.
3948 16 No The transaction was terminated because of the availability replica config/state change or because ghost records are being deleted on the primary and the secondary availability replica that might be needed by queries running under snapshot isolation. Retry the transaction.
3949 16 No Transaction aborted when accessing versioned row in table '%.*ls' in database '%.*ls'. Requested versioned row was not found because the readable secondary access is not allowed for the operation that attempted to create the version. This might be timing related, so try the query again later.
3950 16 No Version store scan timed out when attempting to read the next row. Please try the statement again later when the system is not as busy.
3951 16 No Transaction failed in database '%.*ls' because the statement was run under snapshot isolation but the transaction did not start in snapshot isolation. You cannot change the isolation level of the transaction to snapshot after the transaction has started unless the transaction was originally started under snapshot isolation level.
3952 16 No Snapshot isolation transaction failed accessing database '%.*ls' because snapshot isolation is not allowed in this database. Use ALTER DATABASE to allow snapshot isolation.
3953 16 No Snapshot isolation transaction failed in database '%.*ls' because the database was not recovered when the current transaction was started. Retry the transaction after the database has recovered.
3954 16 No Snapshot isolation transaction failed to start in database '%.*ls' because the ALTER DATABASE command that disallows snapshot isolation had started before this transaction began. The database is in transition to OFF state. You will either need to change the isolation level of the transaction or re-enable the snapshot isolation in the database.
3955 16 No Snapshot isolation transaction failed in database '%.*ls' because the recovery was skipped for this database. You must recover the database before you can run a transaction under snapshot isolation.
3956 16 No Snapshot isolation transaction failed to start in database '%.*ls' because the ALTER DATABASE command which enables snapshot isolation for this database has not finished yet. The database is in transition to pending ON state. You must wait until the ALTER DATABASE Command completes successfully.
3957 16 No Snapshot isolation transaction failed in database '%.*ls' because the database did not allow snapshot isolation when the current transaction started. It may help to retry the transaction.
3958 16 No Transaction aborted when accessing versioned row in table '%.*ls' in database '%.*ls'. Requested versioned row was not found. Your tempdb is probably out of space. Please refer to BOL on how to configure tempdb for versioning.
3959 10 Yes Version store is full. New version(s) could not be added. A transaction that needs to access the version store may be rolled back. Please refer to BOL on how to configure tempdb for versioning.
3960 16 No Snapshot isolation transaction aborted due to update conflict. You cannot use snapshot isolation to access table '%.*ls' directly or indirectly in database '%.*ls' to update, delete, or insert the row that has been modified or deleted by another transaction. Retry the transaction or change the isolation level for the update/delete statement.
3961 16 No Snapshot isolation transaction failed in database '%.*ls' because the object accessed by the statement has been modified by a DDL statement in another concurrent transaction since the start of this transaction. It is disallowed because the metadata is not versioned. A concurrent update to metadata can lead to inconsistency if mixed with snapshot isolation.
3962 16 No Bind to another transaction while executing SQL Server internal query is not supported. Check your logon trigger definition and remove any sp_bindsession usage if any. If this error is not happening during logon trigger execution, contact production support team.
3963 16 No Transaction failed in database '%.*ls' because distributed transactions are not supported under snapshot isolation.
3964 16 No Transaction failed because this DDL statement is not allowed inside a snapshot isolation transaction. Since metadata is not versioned, a metadata change can lead to inconsistency if mixed within snapshot isolation.
3965 16 No The PROMOTE TRANSACTION request failed because there is no local transaction active.
3966 17 No Transaction is rolled back when accessing version store. It was earlier marked as victim when the version store was shrunk due to insufficient space in tempdb. This transaction was marked as a victim earlier because it may need the row version(s) that have already been removed to make space in tempdb. Retry the transaction
3967 17 Yes Insufficient space in tempdb to hold row versions. Need to shrink the version store to free up some space in tempdb. Transaction (id=%I64d xsn=%I64d spid=%d elapsed_time=%d) has been marked as victim and it will be rolled back if it accesses the version store. If the problem persists, the likely cause is improperly sized tempdb or long running transactions. Please refer to BOL on how to configure tempdb for versioning.
3968 10 No Snapshot isolation or read committed snapshot is not available in database '%.*ls' because SQL Server was started with one or more undocumented trace flags that prevent enabling database for versioning. Transaction started with snapshot isolation will fail and a query running under read committed snapshot will succeed but will resort back to lock based read committed.
3969 16 No Distributed transaction is not supported while running SQL Server internal query. Check your logon trigger definition and remove any distributed transaction usage if any. If this error is not happening during logon trigger execution, contact production support team.
3970 16 No This operation conflicts with another pending operation on this transaction. The operation failed.
3971 16 No The server failed to resume the transaction. Desc:%I64x.
3972 20 Yes Incoming Tabular Data Stream (TDS) protocol is incorrect. Transaction Manager event has wrong length. Event type: %d. Expected length: %d. Actual length: %d.
3973 16 No The database is currently being used by another thread under the same workspace in exclusive mode. The operation failed.
3974 16 No The number of databases in exclusive mode usage under a workspace is limited. Because the limit has been exceeded, the operation failed.
3975 16 No The varchar(max) data type is not supported for sp_getbindtoken. The batch has been aborted.
3976 16 No The transaction name has the odd length %d. The batch has been aborted.
3977 16 No The savepoint name cannot be NULL. The batch has been aborted.
3978 16 No Beginning a new transaction after rollback to save point is not allowed.
3979 16 No The TM request is longer than expected. The request is not processed.
3980 16 No The request failed to run because the batch is aborted, this can be caused by abort signal sent from client, or another request is running in the same session, which makes the session busy.
3981 16 No The transaction operation cannot be performed because there are pending requests working on this transaction.
3982 16 No New transaction is not allowed to be started while DTC or bound transaction is active.
3983 16 No The operation failed because the session is not single threaded.
3984 16 No Cannot acquire a database lock during a transaction change.
3985 16 No An error occurred during the changing of transaction context. This is usually caused by low memory in the system. Try to free up more memory.
3986 19 No The transaction timestamps ran out. Restart the server.
3987 10 No SNAPSHOT ISOLATION is always enabled in this database.
3988 16 No New transaction is not allowed because there are other threads running in the session.
3989 16 No New request is not allowed to start because it should come with valid transaction descriptor.
3990 16 No Transaction is not allowed to commit inside of a user defined routine, trigger or aggregate because the transaction is not started in that CLR level. Change application logic to enforce strict transaction nesting.
3991 16 No The context transaction which was active before entering user defined routine, trigger or aggregate "%.*ls" has been ended inside of it, which is not allowed. Change application logic to enforce strict transaction nesting.
3992 16 No Transaction count has been changed from %d to %d inside of user defined routine, trigger or aggregate "%.*ls". This is not allowed and user transaction will be rolled back. Change application logic to enforce strict transaction nesting.
3993 16 No The user transaction that has been started in user defined routine, trigger or aggregate "%.*ls" is not ended upon exiting from it. This is not allowed and the transaction will be rolled back. Change application logic to enforce strict transaction nesting.
3994 16 No User defined routine, trigger or aggregate tried to rollback a transaction that is not started in that CLR level. An exception will be thrown to prevent execution of rest of the user defined routine, trigger or aggregate.
3995 16 No Unknown transaction isolation level %d, valid value range is 0 to 5.
3996 16 No Snapshot isolation level is not supported for distributed transaction. Use another isolation level or do not use distributed transaction.
3997 16 No A transaction that was started in a MARS batch is still active at the end of the batch. The transaction is rolled back.
3998 16 No Uncommittable transaction is detected at the end of the batch. The transaction is rolled back.
3999 17 Yes Failed to flush the commit table to disk in dbid %d due to error %d. Check the errorlog for more information.
Error Severity Event logged Description
3001 16 No obsolete
3002 16 No Cannot BACKUP or RESTORE a database snapshot.
3003 10 No This BACKUP WITH DIFFERENTIAL will be based on more than one file backup. All those file backups must be restored before attempting to restore this differential backup.
3004 16 No The primary filegroup cannot be backed up as a file backup because the database is using the SIMPLE recovery model. Consider taking a partial backup by specifying READ_WRITE_FILEGROUPS.
3005 10 No The differential partial backup is including a read-only filegroup, '%ls'. This filegroup was read-write when the base partial backup was created, but was later changed to read-only access. We recommend that you create a separate file backup of the '%ls' filegroup now, and then create a new partial backup to provide a new base for later differential partial backups.
3006 16 No The differential backup is not allowed because it would be based on more than one base backup. Multi-based differential backups are not allowed in the simple recovery model, and are never allowed for partial differential backups.
3007 16 No The backup of the file or filegroup "%ls" is not permitted because it is not online. Container state: "%ls" (%d). Restore status: %d. BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data.
3008 16 No The specified device type is not supported for backup mirroring.
3009 16 No Could not insert a backup or restore history/detail record in the msdb database. This may indicate a problem with the msdb database. The backup/restore operation was still successful.
3010 16 No Invalid backup mirror specification. All mirrors must have the same number of members.
3011 16 No All backup devices must be of the same general class (for example, DISK and TAPE).
3012 17 No VDI ran out of buffer when SQL Server attempted to send differential information to SQL Writer.
3013 16 No %hs is terminating abnormally.
3014 10 No %hs successfully processed %I64d pages in %d.%03d seconds (%d.%03d MB/sec).
3015 10 No %hs is not yet implemented.
3016 16 No Backup of file '%ls' is not permitted because it contains pages subject to an online restore sequence. Complete the restore sequence before taking the backup, or restrict the backup to exclude this file.
3017 16 No The restart-checkpoint file '%ls' could not be opened. Operating system error '%ls'. Correct the problem, or reissue the command without RESTART.
3018 10 No The restart-checkpoint file '%ls' was not found. The RESTORE command will continue from the beginning as if RESTART had not been specified.
3019 16 No The restart-checkpoint file '%ls' is from a previous interrupted RESTORE operation and is inconsistent with the current RESTORE command. The restart command must use the same syntax as the interrupted command, with the addition of the RESTART clause. Alternatively, reissue the current statement without the RESTART clause.
3021 16 No Cannot perform a backup or restore operation within a transaction.
3022 10 No This backup is a file backup of read-write data from a database that uses the simple recovery model. This is only appropriate if you plan to set the filegroup to read-only followed by a differential file backup. Consult Books Online for more information on managing read-only data for the simple recovery model. In particular, consider how partial backups are used.
3023 16 No Backup, file manipulation operations (such as ALTER DATABASE ADD FILE) and encryption changes on a database must be serialized. Reissue the statement after the current backup or file manipulation operation is completed.
3024 16 No You can only perform a full backup of the master database. Use BACKUP DATABASE to back up the entire master database.
3025 16 No Missing database name. Reissue the statement specifying a valid database name.
3027 16 No The filegroup "%.*ls" is not part of database "%.*ls".
3028 10 No The restart-checkpoint file '%ls' was corrupted and is being ignored. The RESTORE command will continue from the beginning as if RESTART had not been specified.
3031 16 No Option '%ls' conflicts with option(s) '%ls'. Remove the conflicting option and reissue the statement.
3032 16 No One or more of the options (%ls) are not supported for this statement. Review the documentation for supported options.
3033 16 No BACKUP DATABASE cannot be used on a database opened in emergency mode.
3034 16 No No files were selected to be processed. You may have selected one or more filegroups that have no members.
3035 16 No Cannot perform a differential backup for database "%ls", because a current database backup does not exist. Perform a full database backup by reissuing BACKUP DATABASE, omitting the WITH DIFFERENTIAL option.
3036 16 No The database "%ls" is in warm-standby state (set by executing RESTORE WITH STANDBY) and cannot be backed up until the entire restore sequence is completed.
3038 16 No The file name "%ls" is invalid as a backup device name. Reissue the BACKUP statement with a valid file name.
3039 16 No Cannot perform a differential backup for file '%ls' because a current file backup does not exist. Reissue BACKUP DATABASE omitting the WITH DIFFERENTIAL option.
3040 10 No An error occurred while informing replication of the backup. The backup will continue, but the replication environment should be inspected.
3041 16 Yes BACKUP failed to complete the command %.*ls. Check the backup application log for detailed messages.
3042 10 No BACKUP WITH CONTINUE_AFTER_ERROR successfully generated a backup of the damaged database. Refer to the SQL Server error log for information about the errors that were encountered.
3043 16 No BACKUP '%ls' detected an error on page (%d:%d) in file '%ls'.
3044 16 No Invalid zero-length device name. Reissue the BACKUP statement with a valid device name.
3045 16 No BACKUP or RESTORE requires the NTFS file system for FILESTREAM and full-text support. The path "%.*ls" is not usable.
3046 16 No Inconsistent metadata has been encountered. The only possible backup operation is a tail-log backup using the WITH CONTINUE_AFTER_ERROR or NO_TRUNCATE option.
3047 16 No The BackupDirectory registry key is not configured correctly. This key should specify the root path where disk backup files are stored when full path names are not provided. This path is also used to locate restart checkpoint files for RESTORE.
3048 16 No BACKUP LOG WITH TRUNCATE_ONLY cannot operate on database '%ls' because it is configured for database mirroring.
3049 16 No BACKUP detected corruption in the database log. Check the errorlog for more information.
3050 16 No SQL Server could not send the differential information for database file '%ls' of database '%ls\%ls' to the backup application because the differential information is too large to fit in memory, and an attempt to use a temporary file has failed.
3051 16 No BACKUP LOG was unable to maintain mirroring consistency for database '%ls'. Database mirroring has been suspended.
3052 16 No BACKUP LOG was unable to log updates for for database '%ls'. Subsequent log backups will be required to advance the backup point from %S_LSN to %S_LSN after log space is made available for logging them.
3053 16 No BACKUP '%ls' detected an error on a page in file '%ls'.
3054 16 No Differential file backups can include only read-only data for databases using the simple recovery model. Consider taking a partial backup by specifying READ_WRITE_FILEGROUPS.
3055 16 No Backup destination "%.*ls" supports a FILESTREAM filegroup. This filegroup cannot be used as a backup destination. Rerun the BACKUP statement with a valid backup destination.
3056 16 No The backup operation has detected an unexpected file in a FILESTREAM container. The backup operation will continue and include file '%ls'.
3057 16 No Invalid device name. The length of the device name provided exceeds supported limit (maximum length is:%d). Reissue the BACKUP statement with a valid device name.
3058 10 No File or device name exceeds the supported limit (maximum length is:%d) and will be truncated: %.*ls.
3059 16 No This BACKUP or RESTORE command is not supported on a database mirror or secondary replica.
3060 10 No The restart-checkpoint file '%ls' was corrupted. The restored database can not be recovered. Restart the RESTORE sequence.
3061 16 No The restart-checkpoint file '%ls' could not be opened. Operating system error '%ls'. Make the file available and retry the operation or, restart the RESTORE sequence.
3062 16 No Cannot backup from a HADRON secondary because it is not in Synchronizing or Synchronized state.
3063 16 No Write to backup block blob device %ls failed. Device has reached its limit of allowed blocks.
3064 16 No Write to backup block blob detected out of order write at offset %ld, last block offset was at %ld.
3065 16 No Attempt to commit the block list for a block blob failed. Blob Name is "%.*ls". Storage Errorcode %ld.
3066 16 No Could not find the database file referenced by the file snapshot %.*ls. Please make sure that the URL points to a valid snapshot on a database file.
3067 16 No Failed while trying to delete file snapshot %.*ls. Error code %ld.
3068 16 No Invalid file snapshot URL. Please make sure that the URL is correctly formed.
3069 16 No Striping a backup set across multiple devices is not permitted for file snapshot backups.
3070 16 No Specifying the WITH options FORMAT and FILE_SNAPSHOT is not permitted.
3071 16 No The database %.*ls is configured for file snapshot point in time restore, log backups are not permitted.
3072 16 No Backup encryption is incompatible with file snapshot backup if TDE is not enabled on the database.
3073 16 No The option WITH FILE_SNAPSHOT is only permitted if all database files are in Azure Storage.
3074 16 No Failed while getting attributes for the file snapshot %.*ls. Error code %ld.
3075 16 No Device name '%.*ls' is not a valid MOVE target when restoring from a File Snapshot Backup.
3076 16 No File Snapshot Backup is only permitted with a single backup device and no additonal mirrored devices.
3077 10 No File snapshot %.*ls not found.
3078 16 No The file name "%ls" is invalid as a backup device name for the specified device type. Reissue the BACKUP statement with a valid file name and device type.
3079 16 No Could not find the blob file %.*ls. Please make sure that the file name points to a valid blob file.
3080 16 No Invalid Backup Path. The length of the default backup path provided exceeds supported limit (maximum length is: %d). Correct the default backup path.
3095 16 No The backup cannot be performed because 'ENCRYPTION' was requested after the media was formatted with an incompatible structure. To append to this media set, either omit 'ENCRYPTION' or create a new media set by using WITH FORMAT in your BACKUP statement. If you use WITH FORMAT on an existing media set, all its backup sets will be overwritten.
3096 16 No The Certificate specified for backup encryption has expired.
3097 16 No The Backup cannot be performed because the existing media set is formatted with an incompatible version.
3098 16 No The backup cannot be performed because '%ls' was requested after the media was formatted with an incompatible structure. To append to this media set, either omit '%ls' or specify '%ls'. Alternatively, you can create a new media set by using WITH FORMAT in your BACKUP statement. If you use WITH FORMAT on an existing media set, all its backup sets will be overwritten.
3099 16 No Backup Encryption options were specified, Backup Encryption support has not been enabled on this version.
3101 16 No Exclusive access could not be obtained because the database is in use.
3102 16 No %ls cannot process database '%ls' because it is in use by this session. It is recommended that the master database be used when performing this operation.
3103 16 No A partial restore sequence cannot be initiated by this command. To initiate a partial restore sequence, use the WITH PARTIAL clause of the RESTORE statement and provide a backup set which includes a full copy of at least the primary data file. The WITH PARTIAL clause of the RESTORE statement may not be used for any other purpose.
3104 16 No RESTORE cannot operate on database '%ls' because it is configured for database mirroring or has joined an availability group. If you intend to restore the database, use ALTER DATABASE to remove mirroring or to remove the database from its availability group.
3105 16 No RESTORE cannot restore any more pages into file '%ls' because the maximum number of pages (%d) are already being restored. Either complete the restore sequence for the existing pages, or use RESTORE FILE to restore all pages in the file.
3106 16 No The filegroup "%ls" is ambiguous. The identity in the backup set does not match the filegroup that is currently defined in the online database. To force the use of the filegroup in the backup set, take the database offline and then reissue the RESTORE command.
3107 16 No The file "%ls" is ambiguous. The identity in the backup set does not match the file that is currently defined in the online database. To force the use of the file in the backup set, take the database offline and then reissue the RESTORE command.
3108 16 No To restore the master database, the server must be running in single-user mode. For information on starting in single-user mode, see "How to: Start an Instance of SQL Server (sqlservr.exe)" in Books Online.
3109 16 No Master can only be restored and fully recovered in a single step using a full database backup. Options such as NORECOVERY, STANDBY, and STOPAT are not supported.
3110 14 No User does not have permission to RESTORE database '%.*ls'.
3111 16 No Page %S_PGID is a control page which cannot be restored in isolation. To repair this page, the entire file must be restored.
3112 16 No Cannot restore any database other than master when the server is in single user mode.
3113 16 No Invalid data was detected.
3115 16 No The database is using the simple recovery model. It is not possible to restore a subset of the read-write data.
3116 16 No The supplied backup is not on the same recovery path as the database, and is ineligible for use for an online file restore.
3117 16 No The log or differential backup cannot be restored because no files are ready to rollforward.
3118 16 No The database "%ls" does not exist. RESTORE can only create a database when restoring either a full backup or a file backup of the primary file.
3119 16 No Problems were identified while planning for the RESTORE statement. Previous messages provide details.
3120 16 No This backup set will not be restored because all data has already been restored to a point beyond the time covered by this backup set.
3121 16 No The file "%ls" is on a recovery path that is inconsistent with application of this backup set. RESTORE cannot continue.
3122 16 No File initialization failed. RESTORE cannot continue.
3123 16 No Invalid database name '%.*ls' specified for backup or restore operation.
3125 16 No The database is using the simple recovery model. The data in the backup it is not consistent with the current state of the database. Restoring more data is required before recovery is possible. Either restore a full file backup taken since the data was marked read-only, or restore the most recent base backup for the target data followed by a differential file backup.
3127 16 Yes The file '%.*ls' of restored database '%ls' is being left in the defunct state because the database is using the simple recovery model and the file is marked for read-write access. Therefore, only read-only files can be recovered by piecemeal restore.
3128 16 No File '%ls' has an unsupported page size (%d).
3129 16 No The contents of the file "%ls" are not consistent with a transition into the restore sequence. A restore from a backup set may be required.
3130 10 No The filegroup "%ls" is selected. At the time of backup it was known by the name "%ls"'. RESTORE will continue operating upon the renamed filegroup.
3131 10 No The file "%ls" is selected. At the time of backup it was known by the name "%ls". RESTORE will continue operating upon the renamed file.
3132 16 No The media set has %d media families but only %d are provided. All members must be provided.
3133 16 No The volume on device "%ls" is sequence number %d of media family %d, but sequence number %d of media family %d is expected. Check that the device specifications and loaded media are correct.
3134 10 Yes The differential base attribute for file '%ls' of database '%ls' has been reset because the file has been restored from a backup taken on a conflicting recovery path. The restore was allowed because the file was read-only and was consistent with the current status of the database. Any future differential backup of this file will require a new differential base.
3135 16 No The backup set in file '%ls' was created by %hs and cannot be used for this restore operation.
3136 16 No This differential backup cannot be restored because the database has not been restored to the correct earlier state.
3137 16 No Database cannot be reverted. Either the primary or the snapshot names are improperly specified, all other snapshots have not been dropped, or there are missing files.
3138 16 No The database cannot be reverted because FILESTREAM BLOBs are present.
3139 16 No Restore to snapshot is not allowed with the master database.
3140 16 No Could not adjust the space allocation for file '%ls'.
3141 16 No The database to be restored was named '%ls'. Reissue the statement using the WITH REPLACE option to overwrite the '%ls' database.
3142 16 No File "%ls" cannot be restored over the existing "%ls". Reissue the RESTORE statement using WITH REPLACE to overwrite pre-existing files, or WITH MOVE to identify an alternate location.
3143 16 No The data set on device '%ls' is not a SQL Server backup set.
3144 16 No File '%.*ls' was not backed up in file %d on device '%ls'. The file cannot be restored from this backup set.
3145 16 No The STOPAT option is not supported for databases that use the SIMPLE recovery model.
3147 16 No Backup and restore operations are not allowed on database tempdb.
3148 16 No This RESTORE statement is invalid in the current context. The 'Recover Data Only' option is only defined for secondary filegroups when the database is in an online state. When the database is in an offline state filegroups cannot be specified.
3149 16 No The file or filegroup "%ls" is not in a valid state for the "Recover Data Only" option to be used. Only secondary files in the OFFLINE or RECOVERY_PENDING state can be processed.
3150 10 No The master database has been successfully restored. Shutting down SQL Server.
3151 21 Yes Failed to restore master database. Shutting down SQL Server. Check the error logs, and rebuild the master database. For more information about how to rebuild the master database, see SQL Server Books Online.
3153 16 No The database is already fully recovered.
3154 16 No The backup set holds a backup of a database other than the existing '%ls' database.
3155 16 No The RESTORE operation cannot proceed because one or more files have been added or dropped from the database since the backup set was created.
3156 16 No File '%ls' cannot be restored to '%ls'. Use WITH MOVE to identify a valid location for the file.
3159 16 No The tail of the log for the database "%ls" has not been backed up. Use BACKUP LOG WITH NORECOVERY to backup the log if it contains work you do not want to lose. Use the WITH REPLACE or WITH STOPAT clause of the RESTORE statement to just overwrite the contents of the log.
3161 16 No The primary file is unavailable. It must be restored or otherwise made available.
3163 16 No The transaction log was damaged. All data files must be restored before RESTORE LOG can be attempted.
3165 16 No Database '%ls' was restored, however an error was encountered while replication was being restored/removed. The database has been left offline. See the topic MSSQL_ENG003165 in SQL Server Books Online.
3166 16 No RESTORE DATABASE could not drop database '%ls'. Drop the database and then reissue the RESTORE DATABASE statement.
3167 16 No RESTORE could not start database '%ls'.
3168 16 No The backup of the system database on the device %ls cannot be restored because it was created by a different version of the server (%ls) than this server (%ls).
3169 16 No The database was backed up on a server running version %ls. That version is incompatible with this server, which is running version %ls. Either restore the database on a server that supports the backup, or use a backup that is compatible with this server.
3170 16 No The STANDBY filename is invalid.
3171 16 No File %ls is defunct and cannot be restored into the online database.
3172 16 No Filegroup %ls is defunct and cannot be restored into the online database.
3173 16 No The STOPAT clause provided with this RESTORE statement indicates that the tail of the log contains changes that must be backed up to reach the target point in time. The tail of the log for the database "%ls" has not been backed up. Use BACKUP LOG WITH NORECOVERY to back up the log, or use the WITH REPLACE clause in your RESTORE statement to overwrite the tail of the log.
3174 16 No The file '%ls' cannot be moved by this RESTORE operation.
3175 10 No RESTORE FILEGROUP="%ls" was specified, but not all of its files are present in the backup set. File "%ls" is missing. RESTORE will continue, but if you want all files to be restored, you must restore other backup sets.
3176 16 No File '%ls' is claimed by '%ls'(%d) and '%ls'(%d). The WITH MOVE clause can be used to relocate one or more files.
3178 16 No File %ls is not in the correct state to have this differential backup applied to it.
3179 16 No The system database cannot be moved by RESTORE.
3180 16 No This backup cannot be restored using WITH STANDBY because a database upgrade is needed. Reissue the RESTORE without WITH STANDBY.
3181 10 No Attempting to restore this backup may encounter storage space problems. Subsequent messages will provide details.
3182 16 No The backup set cannot be restored because the database was damaged when the backup occurred. Salvage attempts may exploit WITH CONTINUE_AFTER_ERROR.
3183 16 No RESTORE detected an error on page (%d:%d) in database "%ls" as read from the backup set.
3184 10 No RESTORE WITH CONTINUE_AFTER_ERROR was successful but some damage was encountered. Inconsistencies in the database are possible.
3185 16 No RESTORE cannot apply this backup set because the database is suspect. Restore a backup set that repairs the damage.
3186 16 No The backup set has been damaged. RESTORE will not attempt to apply this backup set.
3187 16 No RESTORE WITH CHECKSUM cannot be specified because the backup set does not contain checksum information.
3188 10 No The backup set was written with damaged data by a BACKUP WITH CONTINUE_AFTER_ERROR.
3189 16 No Damage to the backup set was detected.
3190 16 No Filegroup '%ls' cannot be restored because it does not exist in the backup set.
3191 16 No Restore cannot continue because file '%ls' cannot be written. Ensure that all files in the database are writable.
3192 10 No Restore was successful but deferred transactions remain. These transactions cannot be resolved because there are data that is unavailable. Either use RESTORE to make that data available or drop the filegroups if you never need this data again. Dropping the filegroup results in a defunct filegroup.
3193 16 No Restore Log operations are not permitted for a Log Backup with FILE_SNAPSHOT if bulk operations were present during the backup period. The Restore can be accomplished by issuing Restore Database from this archive.
3194 16 No Page %S_PGID is beyond the end of the file. Only pages that are in the current range of the file can be restored.
3195 16 No Page %S_PGID cannot be restored from this backup set. RESTORE PAGE can only be used from full backup sets or from the first log or differential backup taken since the file was added to the database.
3196 16 No RESTORE master WITH SNAPSHOT is not supported. To restore master from a snapshot backup, stop the service and copy the data and log file.
3197 10 Yes I/O is frozen on database %ls. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup.
3198 10 Yes I/O was resumed on database %ls. No user action is required.
3199 16 No RESTORE requires MAXTRANSFERSIZE=%u but %u was specified.
3201 16 No Cannot open backup device '%ls'. Operating system error %ls.
3202 16 No Write on "%ls" failed: %ls
3203 16 No Read on "%ls" failed: %ls
3204 16 No The backup or restore was aborted.
3205 16 No Too many backup devices specified for backup or restore; only %d are allowed.
3206 16 No Backup device '%.*ls' does not exist. To view existing backup devices, use the sys.backup_devices catalog view. To create a new backup device use either sp_addumpdevice or SQL Server Management Studio.
3207 16 No Backup or restore requires at least one backup device. Rerun your statement specifying a backup device.
3208 16 No Unexpected end of file while reading beginning of backup set. Confirm that the media contains a valid SQL Server backup set, and see the console error log for more details.
3209 16 No Operation is not supported on user instances.
3210 16 No The mirror member in drive "%ls" is inconsistent with the mirror member in drive "%ls".
3211 10 No %d percent processed.
3212 16 No The mirror device "%ls" and the mirror device "%ls" have different device specifications.
3213 16 No Unable to unload one or more tapes. See the error log for details.
3214 16 No Too many backup mirrors are specified. Only %d are allowed.
3215 16 No Use WITH FORMAT to create a new mirrored backup set.
3216 16 No RESTORE REWINDONLY is only applicable to tape devices.
3217 16 No Invalid value specified for %ls parameter.
3218 16 No Backup mirroring is not available in this edition of SQL Server. See Books Online for more details on feature support in different SQL Server editions.
3219 16 No The file or filegroup "%.*ls" cannot be selected for this operation.
3220 16 No The specified URL points to a Block Blob. Backup and Restore operations on Block Blobs are not supported when WITH CREDENTIAL syntax is used.
3221 16 No The ReadFileEx system function executed on file '%ls' only read %d bytes, expected %d.
3222 16 No The WriteFileEx system function executed on file '%ls' only wrote %d bytes, expected %d.
3223 16 No Backup To URL failed to write status messages to the operating system error log.
3224 16 No Cannot create worker thread.
3225 16 No Use of WITH CREDENTIAL syntax is not valid for credentials containing a Shared Access Signature.
3226 16 No Failed to create snapshot for file "%ls".
3227 16 No The backup media on "%ls" is part of media family %d which has already been processed on "%ls". Ensure that backup devices are correctly specified. For tape devices, ensure that the correct volumes are loaded.
3228 16 No Writing snapshot metadata to backup set for file "%ls" failed due to invalid format.
3229 16 No Request for device '%ls' timed out.
3230 16 No Operation on device '%ls' exceeded retry count.
3231 16 No The media loaded on "%ls" is formatted to support %d media families, but %d media families are expected according to the backup device specification.
3232 16 No The volume mounted on "%ls" does not have the expected backup set identity. The volume may be obsolete due to a more recent overwrite of this media family. In that case, locate the correct volume with sequence number %d of media family %d.
3234 16 No Logical file '%.*ls' is not part of database '%ls'. Use RESTORE FILELISTONLY to list the logical file names.
3235 16 No The file "%.*ls" is not part of database "%ls". You can only list files that are members of this database.
3238 16 No The Estimate for the Backup size exceeds the maximum allowed file size on the remote endpoint.
3239 16 No The backup set on device '%ls' uses a feature of the Microsoft Tape Format not supported by SQL Server.
3240 16 No Backup to mirrored media sets requires all mirrors to append. Provide all members of the set, or reformat a new media set.
3241 16 No The media family on device '%ls' is incorrectly formed. SQL Server cannot process this media family.
3242 16 No The file on device '%ls' is not a valid Microsoft Tape Format backup set.
3243 16 No The media family on device '%ls' was created using Microsoft Tape Format version %d.%d. SQL Server supports version %d.%d.
3244 16 No Descriptor block size exceeds %d bytes. Use a shorter name and/or description string and retry the operation.
3245 16 No Could not convert a string to or from Unicode, %ls.
3246 16 No The media family on device '%ls' is marked as nonappendable. Reissue the statement using the INIT option to overwrite the media.
3247 16 No The volume on device '%ls' has the wrong media sequence number (%d). Remove it and insert volume %d.
3249 16 No The volume on device '%ls' is a continuation volume for the backup set. Remove it and insert the volume holding the start of the backup set.
3250 16 No The value '%d' is not within range for the %ls parameter.
3251 10 No The media family on device '%ls' is complete. The device is now being reused for one of the remaining families.
3252 16 No Failed to copy snapshot with name '%ls', timestamp '%ls' to destination '%ls'. Error returned '%ls'.
3253 16 No The block size parameter must supply a value that is a power of 2.
3254 16 No The volume on device '%ls' is empty.
3255 16 No The data set on device '%ls' is a SQL Server backup set not compatible with this version of SQL Server.
3256 16 No The backup set on device '%ls' was terminated while it was being created and is incomplete. RESTORE sequence is terminated abnormally.
3257 16 No There is insufficient free space on disk volume '%ls' to create the database. The database requires %I64u additional free bytes, while only %I64u bytes are available.
3258 16 No The volume on the device "%ls" is not part of the media set that is currently being processed. Ensure that the backup devices are loaded with the correct media.
3259 16 No Failed to copy blob with name '%ls', to destination '%ls'. Error returned '%ls'.
3260 16 No An internal buffer has become full.
3261 16 No SQL Server cannot use the virtual device configuration.
3262 10 No The backup set on file %d is valid.
3263 16 No Cannot use the volume on device '%ls' as a continuation volume. It is sequence number %d of family %d for the current media set. Insert a new volume, or sequence number %d of family %d for the current set.
3264 16 No The operation did not proceed far enough to allow RESTART. Reissue the statement without the RESTART qualifier.
3265 16 No The login has insufficient authority. Membership of the sysadmin role is required to use VIRTUAL_DEVICE with BACKUP or RESTORE.
3266 16 Yes The backup data at the end of "%ls" is incorrectly formatted. Backup sets on the media might be damaged and unusable. To determine the backup sets on the media, use RESTORE HEADERONLY. To determine the usability of the backup sets, run RESTORE VERIFYONLY. If all of the backup sets are incomplete, reformat the media using BACKUP WITH FORMAT, which destroys all the backup sets.
3267 16 No Insufficient resources to create UMS scheduler.
3268 16 No Cannot use the backup file '%ls' because it was originally formatted with sector size %d and is now on a device with sector size %d.
3269 16 No Cannot restore the file '%ls' because it was originally written with sector size %d; '%ls' is now on a device with sector size %d.
3270 16 No An internal consistency error has occurred. This error is similar to an assert. Contact technical support for assistance.
3271 16 No A nonrecoverable I/O error occurred on file "%ls:" %ls.
3272 16 No The '%ls' device has a hardware sector size of %d, but the block size parameter specifies an incompatible override value of %d. Reissue the statement using a compatible block size.
3273 16 No The ambiguity for master has be detected. please specify PHYSMASTER or replicatedmaster database explicitly in action '%ls'.
3276 16 No WITH SNAPSHOT can be used only if the backup set was created WITH SNAPSHOT.
3277 16 No WITH SNAPSHOT must be used with only one virtual device.
3278 16 No Failed to encrypt string %ls
3279 16 No Access is denied due to a password failure
3280 16 No Backups on raw devices are not supported. '%ls' is a raw device.
3281 10 No Released and initiated rewind on '%ls'.
3283 16 No The file "%ls" failed to initialize correctly. Examine the error logs for more details.
3284 16 No Filemark on device '%ls' is not aligned. Re-issue the Restore statement with the same blocksize used to create the backupset: '%d' looks like a possible value.
3285 10 No Filemark on device '%ls' appears not to be aligned. The restore operation will proceed using less efficient I/O. To avoid this, re-issue the Restore statement with the same blocksize used to create the backupset: '%d' looks like a possible value.
3286 16 No Backup failed because there is a mismatch in file metadata for file %d.
3287 16 No The file ID %d on device '%ls' is incorrectly formed and can not be read.
3288 16 No Credential name %.*ls does not exist or user does not have permission to access it.
3289 16 No A Backup device of type URL was specified without a Credential, Backup/Restore operation cannot proceed.
3290 16 No Backup to URL received an exception from the remote endpoint. Exception Message: %.*ls
3291 16 No URL device type was specified, and a disallowed option %ls was specified.
3292 16 No A failure occurred while attempting to execute Backup or Restore with a URL device specified. Consult the operating system error log for details.
3293 16 No An error occurred while Backup/Restore to URL was initializing. Error message: %.*ls.
3294 16 No Use of the URL device type is limited to a single device during Backup and Restore operations.
3295 16 No Backup To URL error: Exclusive access to the file %.*ls could not be obtained.
3296 16 No The file %.*ls exists on the remote endpoint, and WITH FORMAT was not specified. Backup cannot proceed.
3297 16 No The URL provided does not meet specified requirements. The URL must be either resolvable as an absolute or relative URI, has or can be composed as an HTTP or HTTPS scheme, and cannot contain a query component.
3298 16 No Backup/Restore to URL device error: %.*ls.
3299 16 No BackupToUrl initiated.
3301 21 Yes The transaction log contains a record (logop %d) that is not valid. The log has been corrupted. Restore the database from a full backup, or repair the database.
3302 21 Yes Redoing of logged operations in database '%.*ls' failed to reach end of log at log record ID %S_LSN. This indicates corruption around log record ID %S_LSN. Restore the database from a full backup, or repair the database.
3303 10 Yes Remote harden of transaction '%.*ls' (ID 0x%016I64x %ls) started at %S_DATE in database '%ls' at LSN %S_LSN failed.
3313 21 Yes During redoing of a logged operation in database '%.*ls' (page %S_PGID if any), an error occurred at log record ID %S_LSN. Typically, the specific failure is previously logged as an error in the operating system error log. Restore the database from a full backup, or repair the database.
3314 21 Yes During undoing of a logged operation in database '%.*ls' (page %S_PGID if any), an error occurred at log record ID %S_LSN. Typically, the specific failure is logged previously as an error in the operating system error log. Restore the database or file from a backup, or repair the database.
3315 21 Yes During rollback, the following process did not hold an expected lock: process %d with mode %d at level %d for row %S_RID in database '%.*ls' under transaction %S_XID. Restore a backup of the database, or repair the database.
3316 21 Yes During undo of a logged operation in database '%.*ls', an error occurred at log record ID %S_LSN. The row was not found. Restore the database from a full backup, or repair the database.
3401 10 Yes Errors occurred during recovery while rolling back a transaction. The transaction was deferred. Restore the bad page or file, and re-run recovery.
3402 10 Yes The database '%ls' is marked %ls and is in a state that does not allow recovery to be run.
3403 10 Yes Recovering only master database because traceflag 3608 was specified. This is an informational message only. No user action is required.
3404 10 Yes Failed to check for new installation or a renamed server at startup. The logic for this check has failed unexpectedly. Run setup again, or fix the problematic registry key.
3406 10 Yes %d transactions rolled forward in database '%.*ls' (%d:%d). This is an informational message only. No user action is required.
3407 10 Yes %d transactions rolled back in database '%.*ls' (%d:%d). This is an informational message only. No user action is required.
3408 10 Yes Recovery is complete. This is an informational message only. No user action is required.
3409 16 Yes Performance counter shared memory setup failed with error %d. Reinstall sqlctr.ini for this instance, and ensure that the instance login account has correct registry permissions.
3410 10 Yes Data in filegroup %s is offline, and deferred transactions exist. Use RESTORE to recover the filegroup, or drop the filegroup if you never intend to recover it. Log truncation cannot occur until this condition is resolved.
3411 21 Yes Configuration block version %d is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
3412 10 Yes Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically. After the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
3413 21 Yes Database ID %d. Could not mark database as suspect. Getnext NC scan on sys.databases.database_id failed. Refer to previous errors in the error log to identify the cause and correct any associated problems.
3414 10 Yes An error occurred during recovery, preventing the database '%ls' (%d:%d) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
3415 16 Yes Database '%.*ls' cannot be upgraded because it is read-only, has read-only files or the user does not have permissions to modify some of the files. Make the database or files writeable, and rerun recovery.
3416 16 Yes The server contains read-only files that must be made writable before the server can be recollated.
3417 21 Yes Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
3418 10 Yes Recovery is unable to defer error %d. Errors can only be deferred in databases using the full recovery model and an active backup log chain.
3419 16 Yes Recovery for database '%.*ls' is being skipped because it requires an upgrade but is marked for Standby. Use RESTORE DATABASE WITH NORECOVERY to take the database back to a Restoring state and continue the restore sequence.
3420 21 Yes Database snapshot '%ls' has failed an IO operation and is marked suspect. It must be dropped and recreated.
3421 10 Yes Recovery completed for database %ls (database ID %d) in %I64d second(s) (analysis %I64d ms, redo %I64d ms, undo %I64d ms [system undo %I64d ms, regular undo %I64d ms].) This is an informational message only. No user action is required.
3422 10 Yes Database %ls was shutdown due to error %d in routine '%hs'. Restart for non-snapshot databases will be attempted after all connections to the database are aborted.
3423 10 Yes Info: The server instance was started using multiuser, minimal configuration startup option (-M).
3429 10 Yes Recovery could not determine the outcome of a cross-database transaction %S_XID, named '%.*ls', in database '%.*ls' (database ID %d:%d). The coordinating database (database ID %d:%d) was unavailable. The transaction was assumed to be committed. If the transaction was not committed, you can retry recovery when the coordinating database is available.
3431 21 Yes Could not recover database '%.*ls' (database ID %d) because of unresolved transaction outcomes. Microsoft Distributed Transaction Coordinator (MS DTC) transactions were prepared, but MS DTC was unable to determine the resolution. To resolve, either fix MS DTC, restore from a full backup, or repair the database.
3434 20 Yes Cannot change sort order or locale. An unexpected failure occurred while trying to reindex the server to a new collation. SQL Server is shutting down. Restart SQL Server to continue with the sort order unchanged. Diagnose and correct previous errors and then retry the operation.
3437 21 Yes An error occurred while recovering database '%.*ls'. Unable to connect to Microsoft Distributed Transaction Coordinator (MS DTC) to check the completion status of transaction %S_XID. Fix MS DTC, and run recovery again.
3441 21 Yes During startup of warm standby database '%.*ls' (database ID %d), its standby file ('%ls') was inaccessible to the RESTORE statement. The operating system error was '%ls'. Diagnose the operating system error, correct the problem, and retry startup.
3443 21 Yes Database '%ls' (database ID %d:%d) was marked for standby or read-only use, but has been modified. The RESTORE LOG statement cannot be performed. Restore the database from a backup.
3445 21 Yes File '%ls' is not a valid undo file for database '%.*ls (database ID %d). Verify the file path, and specify the correct file.
3446 16 No Primary log file is not available for database '%ls' (%d:%d). The log cannot be backed up.
3447 16 No Could not activate or scan all of the log files for database '%.*ls'.
3448 21 Yes Rollback encountered a page with a log sequence number (LSN) less than the original log record LSN. Could not undo log record %S_LSN, for transaction ID %S_XID, on page %S_PGID, database '%ls' (%d:%d). Page information: LSN = %S_LSN, type = %ld. Log information: OpCode = %ld, context %ld. Restore or repair the database.
3449 21 Yes SQL Server must shut down in order to recover a database (database ID %d). The database is either a user database that could not be shut down or a system database. Restart SQL Server. If the database fails to recover after another startup, repair or restore the database.
3450 10 Yes Recovery of database '%.*ls' (%d) is %d%% complete (approximately %d seconds remain). Phase %d of 3. This is an informational message only. No user action is required.
3452 10 Yes Recovery of database '%.*ls' (%d) detected possible identity value inconsistency in table ID %d. Run DBCC CHECKIDENT ('%.*ls').
3453 16 No This version cannot redo any index creation or non-logged operation done by SQL Server 7.0. Further roll forward is not possible.
3454 10 Yes Recovery is writing a checkpoint in database '%.*ls' (%d). This is an informational message only. No user action is required.
3456 21 Yes Could not redo log record %S_LSN, for transaction ID %S_XID, on page %S_PGID, allocation unit %I64d, database '%.*ls' (database ID %d). Page: LSN = %S_LSN, allocation unit = %I64d, type = %ld. Log: OpCode = %ld, context %ld, PrevPageLSN: %S_LSN. Restore from a backup of the database, or repair the database.
3457 21 Yes Transactional file system resource manager '%.*ls' failed to recover. For more information, see the accompanying error message, which determines the appropriate user action.
3458 16 No Recovery cannot scan database "%.*ls" for dropped allocation units because an unexpected error has occurred. These allocation units cannot be cleaned up.
3459 16 No Recovery of database "%.*ls" failed to redo a file add for file "%.*ls". Please delete the file and retry.
3460 21 Yes Failed to shutdown a database (database ID %d) that contains memory-optimized data. Restart SQL Server to bring the database to a consistent state. If the database fails to recover after restart, repair or restore the database.
3461 21 Yes Failed to wait for XTP %ls to complete during recovery.
3462 10 Yes Redo observed a higher LSN on the PFS page %S_PGID for transaction ID %S_XID, database '%.*ls' (database ID %d). Redo LSN: %S_LSN, Page: LSN = %S_LSN, PrevPageLSN: %S_LSN. This can happen in the presence of concurrent PFS updates. No user action is required.
3463 21 Yes An error occurred while recovering database '%.*ls'. Transaction outcome could not be resolved.
3464 16 Yes An error occurred while resolving the deferred transaction. Transaction outcome: %d, IsDeferred: %ls.
3465 16 Yes An error occurred while resolving the deferred transaction. Transaction not found.
3466 10 No Restore was successful but deferred transactions remain. These transactions cannot be resolved because there are data or keys in the enclave that is unavailable. Either use sp_enclave_send_keys to send keys to the enclave, or use RESTORE to make that data available or drop the filegroups if you never need this data again. Dropping the filegroup results in a defunct filegroup.
3467 10 No Restore was successful but deferred transactions remain. These transactions cannot be resolved because there are data or keys in the enclave that is unavailable. For keys, since there is no enclave configured, SQL may resolve deferred transactions by invalidating indexes on encrypted columns; please check the error log.For the data, either use RESTORE to make that data available or drop the filegroups if you never need this data again. Dropping the filegroup results in a defunct filegroup.
3468 21 No Restore failed due to items not being found in the expected restore pipeline queues.
3505 14 No Only the owner of database "%.*ls" or someone with relevant permissions can run the CHECKPOINT statement.
3604 10 No Duplicate key was ignored.
3605 16 No Schema verification failed for database '%.*ls'.
3606 10 No Arithmetic overflow occurred.
3607 10 No Division by zero occurred.
3608 16 No Cannot allocate a GUID for the token.
3609 16 No The transaction ended in the trigger. The batch has been aborted.
3611 10 No %hs SQL Server Execution Times:%hs CPU time not measured under fiber mode, elapsed time = %lu ms.
3612 10 No %hs SQL Server Execution Times:%hs CPU time = %lu ms, elapsed time = %lu ms.
3613 10 No SQL Server parse and compile time: %hs CPU time = %lu ms, elapsed time = %lu ms.
3615 10 No Table '%.*ls'. Scan count %d, logical reads %d, physical reads %d, page server reads %d, read-ahead reads %d, page server read-ahead reads %d, lob logical reads %d, lob physical reads %d, lob page server reads %d, lob read-ahead reads %d, lob page server read-ahead reads %d.
3616 16 No An error was raised during trigger execution. The batch has been aborted and the user transaction, if any, has been rolled back.
3619 10 Yes Could not write a checkpoint record in database %ls because the log is out of space. Contact the database administrator to truncate the log or allocate more space to the database log files.
3620 10 Yes Automatic checkpointing is disabled in database '%.*ls' because the log is out of space. Automatic checkpointing will be enabled when the database owner successfully checkpoints the database. Contact the database owner to either truncate the log file or add more disk space to the log. Then retry the CHECKPOINT statement.
3621 10 No The statement has been terminated.
3622 10 No Warning: An invalid floating point operation occurred.
3623 16 No An invalid floating point operation occurred.
3624 20 Yes A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a Hotfix from Technical Support.
3625 20 Yes '%hs' is not yet implemented.
3627 17 Yes New parallel operation cannot be started due to too many parallel operations executing at this time. Use the "max worker threads" configuration option to increase the number of allowable threads, or reduce the number of parallel operations running on the system.
3628 24 Yes The Database Engine received a floating point exception from the operating system while processing a user request. Try the transaction again. If the problem persists, contact your system administrator.
3633 16 Yes The operating system returned the error '%ls' while attempting '%ls' on '%ls' at '%hs'(%d).
3634 16 Yes The operating system returned the error '%ls' while attempting '%ls' on '%ls'.
3635 16 Yes An error occurred while processing '%ls' metadata for database id %d, file id %d, and transaction='%.*ls'. Additional Context='%ls'. Location='%hs'(%d). Retry the operation; if the problem persists, contact the database administrator to review locking and memory configurations. Review the application for possible deadlock conflicts.
3636 16 No An error occurred while processing '%ls' metadata for database id %d file id %d.
3637 16 No A parallel operation cannot be started from a DAC connection.
3641 10 No Total logical reads %lu, physical reads %lu, remote reads %lu, writes %lu.
3642 10 No Table '%.*ls'. Segment reads %u, segment skipped %u.
3643 16 No The operation elapsed time exceeded the maximum time specified for this operation. The execution has been stopped.
3644 10 No Prefaulter task failed for file %ls with error %d.
3701 11 No Cannot %S_MSG the %S_MSG '%.*ls', because it does not exist or you do not have permission.
3702 16 No Cannot drop database "%.*ls" because it is currently in use.
3703 16 No Cannot detach the %S_MSG '%.*ls' because it is currently in use.
3705 16 No Cannot use DROP %ls with '%.*ls' because '%.*ls' is a %S_MSG. Use %ls.
3706 16 No Cannot %S_MSG a database snapshot.
3707 16 No Cannot detach a suspect or recovery pending database. It must be repaired or dropped.
3708 16 No Cannot %S_MSG the %S_MSG '%.*ls' because it is a system %S_MSG.
3709 16 No Cannot %S_MSG the database while the database snapshot "%.*ls" refers to it. Drop that database first.
3710 16 No Cannot detach an opened database when the server is in minimally configured mode.
3716 16 No The %S_MSG '%.*ls' cannot be dropped because it is bound to one or more %S_MSG.
3717 16 No Cannot drop a default constraint by DROP DEFAULT statement. Use ALTER TABLE to drop a constraint default.
3718 11 No Could not drop index '%.*ls' because the table or clustered index entry cannot be found in the sysindexes system table.
3721 16 No Type '%.*ls' cannot be renamed because it is being referenced by object '%.*ls'.
3723 16 No An explicit DROP INDEX is not allowed on index '%.*ls'. It is being used for %ls constraint enforcement.
3724 16 No Cannot %S_MSG the %S_MSG '%.*ls' because it is being used for replication.
3725 16 No The constraint '%.*ls' is being referenced by table '%.*ls', foreign key constraint '%.*ls'.
3726 16 No Could not drop object '%.*ls' because it is referenced by a FOREIGN KEY constraint.
3727 10 No Could not drop constraint. See previous errors.
3728 16 No '%.*ls' is not a constraint.
3729 16 No Cannot %ls '%.*ls' because it is being referenced by object '%.*ls'.
3730 16 No Cannot drop the default constraint '%.*ls' while it is being used by a foreign key as SET DEFAULT referential action.
3732 16 No Cannot drop type '%.*ls' because it is being referenced by object '%.*ls'. There may be other objects that reference this type.
3733 16 No Constraint '%.*ls' does not belong to table '%.*ls'.
3734 16 No Could not drop the primary key constraint '%.*ls' because the table has an XML or spatial index.
3735 16 No The primary key constraint '%.*ls' on table '%.*ls' cannot be dropped because change tracking is enabled on the table. Change tracking requires a primary key constraint on the table. Disable change tracking before dropping the constraint.
3736 16 No Cannot drop the %S_MSG '%.*ls' because it is being used for distribution.
3737 16 No Could not delete file '%ls'. See the SQL Server error log for more information.
3738 10 No Deleting database file '%ls'.
3739 11 No Cannot %ls the index '%.*ls' because it is not a statistics collection.
3740 16 No Cannot drop the %S_MSG '%.*ls' because at least part of the table resides on a read-only filegroup.
3741 16 No Cannot drop the %S_MSG '%.*ls' because at least part of the table resides on an offline filegroup.
3743 16 No The database '%.*ls' is enabled for database mirroring. Database mirroring must be removed before you drop the database.
3744 16 No Only a single clause is allowed in a statement where an index is dropped online.
3745 16 No Only a clustered index can be dropped online.
3746 16 No Cannot drop the clustered index of view '%.*ls' because the view is being used for replication.
3747 16 No Cannot drop a clustered index created on a view using drop clustered index clause. Clustered index '%.*ls' is created on view '%.*ls'.
3748 16 No Cannot drop non-clustered index '%.*ls' using drop clustered index clause.
3749 16 No Cannot drop XML Index '%.*ls' using old 'Table.Index' syntax, use 'Index ON Table' syntax instead.
3750 10 No Warning: Index '%.*ls' on %S_MSG '%.*ls' was disabled as a result of disabling the clustered index on the %S_MSG.
3751 16 No Cannot use SP_DROPEXTENDEDPROC or DBCC DROPEXTENDEDPROC with '%.*ls' because '%.*ls' is a %S_MSG. Use %ls.
3752 16 No The database '%.*ls' is currently joined to an availability group. Before you can drop the database, you need to remove it from the availability group.
3753 16 No Cannot %S_MSG the federation member '%.*ls', because the federation root does not exist.
3754 16 No TRUNCATE TABLE statement failed. Index '%.*ls' uses partition function '%.*ls', but table '%.*ls' uses non-equivalent partition function '%.*ls'. Index and table must use an equivalent partition function.
3755 16 No Cannot drop a database with file snapshots on it. Please detach the database instead of dropping or delete the file snapshots and retry the drop.
3756 16 No TRUNCATE TABLE statement failed. Index '%.*ls' is not partitioned, but table '%.*ls' uses partition function '%.*ls'. Index and table must use an equivalent partition function.
3757 16 No WAIT_AT_LOW_PRIORITY clause is not permitted without ONLINE = ON option, for drop clustered %S_MSG '%.*ls' on Table '%.*ls'.
3758 16 No Multiple %S_MSG cannot be dropped when WAIT_AT_LOW_PRIORITY clause is specified.
3759 16 No %.*ls constraint '%.*ls' cannot be dropped when WAIT_AT_LOW_PRIORITY clause is used.
3760 16 No Cannot drop index '%.*ls' on view '%.*ls' that has SNAPSHOT_MATERIALIZATION.
3761 16 No Could not delete SBS backed file '%ls'. See the SQL Server error log for more information.
3764 16 No Cannot %S_MSG the %S_MSG '%.*ls' because it is being used for Change Data Capture.
3800 16 No Column name '%.*ls' is not sufficiently different from the names of other columns in the table '%.*ls'.
3801 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" may be impacted by the collation upgrade. Run DBCC CHECKTABLE.
3802 10 No Warning: The constraint "%.*ls" on "%.*ls"."%.*ls" may be impacted by the collation upgrade. Disable and enable WITH CHECK.
3803 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" is disabled because the implementation of the checksum function has changed.
3804 10 No Warning: The check constraint "%.*ls" on table "%.*ls"."%.*ls" is disabled because the implementation of the checksum function has changed.
3805 10 No Warning: Index "%.*ls" on table "%.*ls"."%.*ls" might be corrupted because it references computed column "%.*ls" containing a non-deterministic conversion from string to date. Run DBCC CHECKTABLE to verify index. Consider using explicit CONVERT with deterministic date style such as 121. Computed column indexes referencing non-deterministic expressions can't be created in 90 compatibility mode. See Books Online topic "Creating Indexes on Computed Columns" for more information.
3806 10 No Warning: Indexed view "%.*ls"."%.*ls" might be corrupted because it contains a non-deterministic conversion from string to date. Run DBCC CHECKTABLE to verify view. Consider using explicit CONVERT with deterministic date style such as 121. Indexed views referencing non-deterministic expressions can't be created in 90 compatibility mode. See Books Online topic "Creating Indexed Views" for more information.
3807 17 No Create failed because all available identifiers have been exhausted.
3808 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" is disabled because the index is defined on a view with ignore_dup_key index option. Drop the index and, if possible, recreate it without ignore_dup_key option. You may need to change the logical structure of the view to ensure all rows are unique.
3809 16 No Upgrade of database "%.*ls" failed because index "%.*ls" on object ID %d has the same name as that of another index on the same table.
3810 10 No Event notification "%.*ls" on assembly is dropped.
3811 10 No Event notification "%.*ls" on service queue is dropped as broker instance is not specified.
3812 10 No Event notification "%.*ls" on object is dropped.
3813 16 No Upgrade of login '%.*ls' failed because its name or sid is a duplicate of another login or server role.
3814 16 No Local login mapped to remote login '%.*ls' on server '%.*ls' is invalid. Drop and recreate the remote login before upgrade.
3815 16 No Local login mapped to linked login '%.*ls' on server '%.*ls' is invalid. Drop and recreate the linked login before upgrade.
3816 16 No Upgrade of login '%.*ls' failed because its password hash is invalid. Update the login password before upgrade.
3817 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" was disabled because the implementation of "%.*ls" have changed.
3819 10 No Warning: The check constraint "%.*ls" on "%.*ls"."%.*ls" was disabled and set as not trusted because the implementation of "%.*ls" have changed.
3821 10 No Warning: The foreign key constraint "%.*ls" on "%.*ls"."%.*ls" was disabled because the implementation of '%.*ls' have changed.
3822 10 No Warning: The heap "%.*ls"."%.*ls" has persisted computed columns that depends on a geometry or geography methods and may contain out-of-date information. Because of this, DBCC may report inconsistencies on this table. The persisted computed columns depending on geometry or geography methods should be unpersisted and persisted again to refresh the data.
3823 10 No Warning: The object "%.*ls"."%.*ls" could not be bound and was ignored during upgrade. Consider reviewing and correcting its definition.
3827 10 No Warning: The table "%.*ls"."%.*ls" is unavailable because it contains a persisted computed column that depends on "%.*ls", the implementation of which has changed. Rebuild the table offline and reconstruct the persisted computed column.
3830 10 No Metadata cache coherency check for database ID(%d) did not find any inconsistency.
3851 10 No An invalid row (%ls) was found in the system table sys.%ls%ls.
3852 10 No Row (%ls) in sys.%ls%ls does not have a matching row (%ls) in sys.%ls%ls.
3853 10 No Attribute (%ls) of row (%ls) in sys.%ls%ls does not have a matching row (%ls) in sys.%ls%ls.
3854 10 No Attribute (%ls) of row (%ls) in sys.%ls%ls has a matching row (%ls) in sys.%ls%ls that is invalid.
3855 10 No Attribute (%ls) exists without a row (%ls) in sys.%ls%ls.
3856 10 No Attribute (%ls) exists but should not for row (%ls) in sys.%ls%ls.
3857 10 No The attribute (%ls) is required but is missing for row (%ls) in sys.%ls%ls.
3858 10 No The attribute (%ls) of row (%ls) in sys.%ls%ls has an invalid value.
3859 10 No Warning: The system catalog was updated directly in database ID %d, most recently at %S_DATE.
3860 10 No Cannot upgrade database ID 32767. This ID value is reserved for SQL Server internal use.
3862 10 No CLR type '%.*ls'.'%.*ls' is disabled because the on disk format for this CLR type has been changed. Use DROP TYPE to remove this disabled type.
3864 23 Yes Could not find an entry for index with ID %d on object with ID %d in database with ID %d. Possible schema corruption. Run DBCC CHECKDB.
3865 16 No The operation on object '%.*ls' is blocked. The object is a FileTable system defined object and user modifications are not allowed.
3866 10 Yes The operation on FileTable system defined object '%.*ls' was allowed because of traceflag settings. To prevent this informational message from appearing in the error log, use DBCC TRACEOFF to turn off the trace flag.
3867 10 No The FileTable object '%.*ls' contains system defined constraints that cannot be modified as long as the FILETABLE_NAMESPACE option is enabled on the table. Only user defined constraints have been updated.
3868 10 No Failed to start tempdb metadata memory-optimized mode. Continuing tempdb startup in SQL mode. Please run ALTER SERVER CONFIGURATION TEMPDB METADATA MEMORY_OPTIMIZED ON once again and restart to retry.
3869 10 No The desired memory-optimized configuration is already set. No further action is necessary.
3870 10 No The tempdb metadata memory-optimized configuration has been set to '%S_MSG'. Restart SQL server for the new setting to take effect.
3871 10 No Tempdb started with memory-optimized metadata.
3872 10 No The hybrid buffer pool memory-optimized configuration has been set to '%S_MSG'. Restart SQL server for the new setting to take effect.
3873 10 No Hybrid buffer pool started with memory-optimized metadata.
3874 16 No Resource pool '%.*ls' does not exist or resource governor has not been reconfigured.
3875 16 No Internal resource pool cannot be used for tempdb
3876 16 No Resource pool setting for tempdb failed. Retry with a valid pool.
3901 16 No The transaction name must be specified when it is used with the mark option.
3902 16 No The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.
3903 16 No The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION.
3904 21 No Cannot unsplit logical page %S_PGID in object '%.*ls', in database '%.*ls'. Both pages together contain more data than will fit on one page.
3905 16 No The number of nested transactions has reached the maximum allowed value of 4294967296.
3906 16 No Failed to update database "%.*ls" because the database is read-only.
3907 16 No Transaction aborted when accessing versioned row in table '%.*ls' in database '%.*ls'. Requested versioned row was not found in persistent version store. Your database is probably out of space. Please refer to BOL on how to configure database size.
3908 16 No Could not run BEGIN TRANSACTION in database '%.*ls' because the database is in emergency mode or is damaged and must be restarted.
3909 16 No Session binding token is invalid.
3910 16 No Transaction context in use by another session.
3911 16 Yes Persistent version store is full. New version(s) could not be added. A transaction that needs to access the version store may be rolled back. Please refer to BOL on how to increase database max size.
3912 16 No Cannot bind using an XP token while the server is not in an XP call.
3913 16 Yes TDS reset connection protocol error. Client driver requested both ResetConnectionKeepLocalXact and ResetConnectionKeepDTCXact at the same time. This is not expected in server.
3914 16 No The data type "%s" is invalid for transaction names or savepoint names. Allowed data types are char, varchar, nchar, varchar(max), nvarchar, and nvarchar(max).
3915 16 No Cannot use the ROLLBACK statement within an INSERT-EXEC statement.
3916 16 No Cannot use the COMMIT statement within an INSERT-EXEC statement unless BEGIN TRANSACTION is used first.
3917 16 No Session is bound to a transaction context that is in use. Other statements in the batch were ignored.
3918 16 No The statement or function must be executed in the context of a user transaction.
3919 16 No Cannot enlist in the transaction because the transaction has already been committed or rolled back.
3920 10 No The WITH MARK option only applies to the first BEGIN TRAN WITH MARK statement. The option is ignored.
3921 16 No Cannot get a transaction token if there is no transaction active. Reissue the statement after a transaction has been started
3922 16 No Cannot enlist in the transaction because the transaction does not exist.
3923 10 No Cannot use transaction marks on database '%.*ls' with bulk-logged operations that have not been backed up. The mark is ignored.
3924 10 No The session was enlisted in an active user transaction while trying to bind to a new transaction. The session has defected from the previous user transaction.
3925 16 No Invalid transaction mark name. The 'LSN:' prefix is reserved.
3926 10 No The transaction active in this session has been committed or aborted by another session.
3927 10 No The session had an active transaction when it tried to enlist in a Distributed Transaction Coordinator transaction.
3928 16 No The marked transaction "%.*ls" failed. A timeout occurred while attempting to place a mark in the log by committing the marked transaction. This can be caused by contention with Microsoft Distributed Transaction Coordinator (MS DTC) transactions or other local marked transaction that have prepared, but not committed or aborted. Try the operation again and if the error persists, determine the source of the contention.
3929 16 No No distributed or bound transaction is allowed in single user database.
3930 16 No The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.
3931 16 No The current transaction cannot be committed and cannot be rolled back to a savepoint. Roll back the entire transaction.
3932 16 No The save point name "%.*ls" that was provided is too long. The maximum allowed length is %d characters.
3933 16 No Cannot promote the transaction to a distributed transaction because there is an active save point in this transaction.
3934 14 No The current user cannot use this FILESTREAM transaction context. To obtain a valid FILESTREAM transaction context, use GET_FILESTREAM_TRANSACTION_CONTEXT.
3935 16 No A FILESTREAM transaction context could not be initialized. This might be caused by a resource shortage. Retry the operation. Error code: 0x%x.
3936 16 No The transaction could not be committed because an error occurred while tyring to flush FILESTREAM data to disk. A file may have been open at commit time or a disk I/O error may have occurred. '%.*ls' was one of the one or more files involved. ErorrCode: 0x%x
3937 16 No While rolling back a transaction, an error occurred while trying to deliver a rollback notification to the FILESTREAM filter driver. Error code: 0x%0x.
3938 18 No The transaction has been stopped because it conflicted with the execution of a FILESTREAM close operation using the same transaction. The transaction will be rolled back.
3939 16 No An uncommittable transaction was detected at the beginning of the batch. The transaction was rolled back. This was caused by an error that occurred during the processing of a FILESTREAM request in the context of this transaction.
3940 16 No Failed to acquire necessary locks during commit and the transaction was rolled back.
3941 16 No The transaction cannot modify an object that is published for replication or has Change Data Capture enabled because the transaction started before replication or Change Data Capture was enabled on the database. Retry the transaction.
3947 10 No The transaction was aborted because the secondary compute failed to catch up redo. Retry the transaction.
3948 16 No The transaction was terminated because of the availability replica config/state change or because ghost records are being deleted on the primary and the secondary availability replica that might be needed by queries running under snapshot isolation. Retry the transaction.
3949 16 No Transaction aborted when accessing versioned row in table '%.*ls' in database '%.*ls'. Requested versioned row was not found because the readable secondary access is not allowed for the operation that attempted to create the version. This might be timing related, so try the query again later.
3950 16 No Version store scan timed out when attempting to read the next row. Please try the statement again later when the system is not as busy.
3951 16 No Transaction failed in database '%.*ls' because the statement was run under snapshot isolation but the transaction did not start in snapshot isolation. You cannot change the isolation level of the transaction to snapshot after the transaction has started unless the transaction was originally started under snapshot isolation level.
3952 16 No Snapshot isolation transaction failed accessing database '%.*ls' because snapshot isolation is not allowed in this database. Use ALTER DATABASE to allow snapshot isolation.
3953 16 No Snapshot isolation transaction failed in database '%.*ls' because the database was not recovered when the current transaction was started. Retry the transaction after the database has recovered.
3954 16 No Snapshot isolation transaction failed to start in database '%.*ls' because the ALTER DATABASE command that disallows snapshot isolation had started before this transaction began. The database is in transition to OFF state. You will either need to change the isolation level of the transaction or re-enable the snapshot isolation in the database.
3955 16 No Snapshot isolation transaction failed in database '%.*ls' because the recovery was skipped for this database. You must recover the database before you can run a transaction under snapshot isolation.
3956 16 No Snapshot isolation transaction failed to start in database '%.*ls' because the ALTER DATABASE command which enables snapshot isolation for this database has not finished yet. The database is in transition to pending ON state. You must wait until the ALTER DATABASE Command completes successfully.
3957 16 No Snapshot isolation transaction failed in database '%.*ls' because the database did not allow snapshot isolation when the current transaction started. It may help to retry the transaction.
3958 16 No Transaction aborted when accessing versioned row in table '%.*ls' in database '%.*ls'. Requested versioned row was not found. Your tempdb is probably out of space. Please refer to BOL on how to configure tempdb for versioning.
3959 10 Yes Version store is full. New version(s) could not be added. A transaction that needs to access the version store may be rolled back. Please refer to BOL on how to configure tempdb for versioning.
3960 16 No Snapshot isolation transaction aborted due to update conflict. You cannot use snapshot isolation to access table '%.*ls' directly or indirectly in database '%.*ls' to update, delete, or insert the row that has been modified or deleted by another transaction. Retry the transaction or change the isolation level for the update/delete statement.
3961 16 No Snapshot isolation transaction failed in database '%.*ls' because the object accessed by the statement has been modified by a DDL statement in another concurrent transaction since the start of this transaction. It is disallowed because the metadata is not versioned. A concurrent update to metadata can lead to inconsistency if mixed with snapshot isolation.
3962 16 No Bind to another transaction while executing SQL Server internal query is not supported. Check your logon trigger definition and remove any sp_bindsession usage if any. If this error is not happening during logon trigger execution, contact production support team.
3963 16 No Transaction failed in database '%.*ls' because distributed transactions are not supported under snapshot isolation.
3964 16 No Transaction failed because this DDL statement is not allowed inside a snapshot isolation transaction. Since metadata is not versioned, a metadata change can lead to inconsistency if mixed within snapshot isolation.
3965 16 No The PROMOTE TRANSACTION request failed because there is no local transaction active.
3966 17 No Transaction is rolled back when accessing version store. It was earlier marked as victim when the version store was shrunk due to insufficient space in tempdb. This transaction was marked as a victim earlier because it may need the row version(s) that have already been removed to make space in tempdb. Retry the transaction
3967 17 Yes Insufficient space in tempdb to hold row versions. Need to shrink the version store to free up some space in tempdb. Transaction (id=%I64d xsn=%I64d spid=%d elapsed_time=%d) has been marked as victim and it will be rolled back if it accesses the version store. If the problem persists, the likely cause is improperly sized tempdb or long running transactions. Please refer to BOL on how to configure tempdb for versioning.
3968 10 No Snapshot isolation or read committed snapshot is not available in database '%.*ls' because SQL Server was started with one or more undocumented trace flags that prevent enabling database for versioning. Transaction started with snapshot isolation will fail and a query running under read committed snapshot will succeed but will resort back to lock based read committed.
3969 16 No Distributed transaction is not supported while running SQL Server internal query. Check your logon trigger definition and remove any distributed transaction usage if any. If this error is not happening during logon trigger execution, contact production support team.
3970 16 No This operation conflicts with another pending operation on this transaction. The operation failed.
3971 16 No The server failed to resume the transaction. Desc:%I64x.
3972 20 Yes Incoming Tabular Data Stream (TDS) protocol is incorrect. Transaction Manager event has wrong length. Event type: %d. Expected length: %d. Actual length: %d.
3973 16 No The database is currently being used by another thread under the same workspace in exclusive mode. The operation failed.
3974 16 No The number of databases in exclusive mode usage under a workspace is limited. Because the limit has been exceeded, the operation failed.
3975 16 No The varchar(max) data type is not supported for sp_getbindtoken. The batch has been aborted.
3976 16 No The transaction name has the odd length %d. The batch has been aborted.
3977 16 No The savepoint name cannot be NULL. The batch has been aborted.
3978 16 No Beginning a new transaction after rollback to save point is not allowed.
3979 16 No The TM request is longer than expected. The request is not processed.
3980 16 No The request failed to run because the batch is aborted, this can be caused by abort signal sent from client, or another request is running in the same session, which makes the session busy.
3981 16 No The transaction operation cannot be performed because there are pending requests working on this transaction.
3982 16 No New transaction is not allowed to be started while DTC or bound transaction is active.
3983 16 No The operation failed because the session is not single threaded.
3984 16 No Cannot acquire a database lock during a transaction change.
3985 16 No An error occurred during the changing of transaction context. This is usually caused by low memory in the system. Try to free up more memory.
3986 19 No The transaction timestamps ran out. Restart the server.
3987 10 No SNAPSHOT ISOLATION is always enabled in this database.
3988 16 No New transaction is not allowed because there are other threads running in the session.
3989 16 No New request is not allowed to start because it should come with valid transaction descriptor.
3990 16 No Transaction is not allowed to commit inside of a user defined routine, trigger or aggregate because the transaction is not started in that CLR level. Change application logic to enforce strict transaction nesting.
3991 16 No The context transaction which was active before entering user defined routine, trigger or aggregate "%.*ls" has been ended inside of it, which is not allowed. Change application logic to enforce strict transaction nesting.
3992 16 No Transaction count has been changed from %d to %d inside of user defined routine, trigger or aggregate "%.*ls". This is not allowed and user transaction will be rolled back. Change application logic to enforce strict transaction nesting.
3993 16 No The user transaction that has been started in user defined routine, trigger or aggregate "%.*ls" is not ended upon exiting from it. This is not allowed and the transaction will be rolled back. Change application logic to enforce strict transaction nesting.
3994 16 No User defined routine, trigger or aggregate tried to rollback a transaction that is not started in that CLR level. An exception will be thrown to prevent execution of rest of the user defined routine, trigger or aggregate.
3995 16 No Unknown transaction isolation level %d, valid value range is 0 to 5.
3996 16 No Snapshot isolation level is not supported for distributed transaction. Use another isolation level or do not use distributed transaction.
3997 16 No A transaction that was started in a MARS batch is still active at the end of the batch. The transaction is rolled back.
3998 16 No Uncommittable transaction is detected at the end of the batch. The transaction is rolled back.
3999 17 Yes Failed to flush the commit table to disk in dbid %d due to error %d. Check the errorlog for more information.
Error Severity Event logged Description
3001 16 No obsolete
3002 16 No Cannot BACKUP or RESTORE a database snapshot.
3003 10 No This BACKUP WITH DIFFERENTIAL will be based on more than one file backup. All those file backups must be restored before attempting to restore this differential backup.
3004 16 No The primary filegroup cannot be backed up as a file backup because the database is using the SIMPLE recovery model. Consider taking a partial backup by specifying READ_WRITE_FILEGROUPS.
3005 10 No The differential partial backup is including a read-only filegroup, '%ls'. This filegroup was read-write when the base partial backup was created, but was later changed to read-only access. We recommend that you create a separate file backup of the '%ls' filegroup now, and then create a new partial backup to provide a new base for later differential partial backups.
3006 16 No The differential backup is not allowed because it would be based on more than one base backup. Multi-based differential backups are not allowed in the simple recovery model, and are never allowed for partial differential backups.
3007 16 No The backup of the file or filegroup "%ls" is not permitted because it is not online. Container state: "%ls" (%d). Restore status: %d. BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data.
3008 16 No The specified device type is not supported for backup mirroring.
3009 16 No Could not insert a backup or restore history/detail record in the msdb database. This may indicate a problem with the msdb database. The backup/restore operation was still successful.
3010 16 No Invalid backup mirror specification. All mirrors must have the same number of members.
3011 16 No All backup devices must be of the same general class (for example, DISK and TAPE).
3012 17 No VDI ran out of buffer when SQL Server attempted to send differential information to SQL Writer.
3013 16 No %hs is terminating abnormally.
3014 10 No %hs successfully processed %I64d pages in %d.%03d seconds (%d.%03d MB/sec).
3015 10 No %hs is not yet implemented.
3016 16 No Backup of file '%ls' is not permitted because it contains pages subject to an online restore sequence. Complete the restore sequence before taking the backup, or restrict the backup to exclude this file.
3017 16 No The restart-checkpoint file '%ls' could not be opened. Operating system error '%ls'. Correct the problem, or reissue the command without RESTART.
3018 10 No The restart-checkpoint file '%ls' was not found. The RESTORE command will continue from the beginning as if RESTART had not been specified.
3019 16 No The restart-checkpoint file '%ls' is from a previous interrupted RESTORE operation and is inconsistent with the current RESTORE command. The restart command must use the same syntax as the interrupted command, with the addition of the RESTART clause. Alternatively, reissue the current statement without the RESTART clause.
3021 16 No Cannot perform a backup or restore operation within a transaction.
3022 10 No This backup is a file backup of read-write data from a database that uses the simple recovery model. This is only appropriate if you plan to set the filegroup to read-only followed by a differential file backup. Consult Books Online for more information on managing read-only data for the simple recovery model. In particular, consider how partial backups are used.
3023 16 No Backup, file manipulation operations (such as ALTER DATABASE ADD FILE) and encryption changes on a database must be serialized. Reissue the statement after the current backup or file manipulation operation is completed.
3024 16 No You can only perform a full backup of the master database. Use BACKUP DATABASE to back up the entire master database.
3025 16 No Missing database name. Reissue the statement specifying a valid database name.
3027 16 No The filegroup "%.*ls" is not part of database "%.*ls".
3028 10 No The restart-checkpoint file '%ls' was corrupted and is being ignored. The RESTORE command will continue from the beginning as if RESTART had not been specified.
3030 16 No Value of '%ls' must be less than or equal to value of '%ls'. Change the values and reissue the BACKUP statement.
3031 16 No Option '%ls' conflicts with option(s) '%ls'. Remove the conflicting option and reissue the statement.
3032 16 No One or more of the options (%ls) are not supported for this statement. Review the documentation for supported options.
3033 16 No BACKUP DATABASE cannot be used on a database opened in emergency mode.
3034 16 No No files were selected to be processed. You may have selected one or more filegroups that have no members.
3035 16 No Cannot perform a differential backup for database "%ls", because a current database backup does not exist. Perform a full database backup by reissuing BACKUP DATABASE, omitting the WITH DIFFERENTIAL option.
3036 16 No The database "%ls" is in warm-standby state (set by executing RESTORE WITH STANDBY) and cannot be backed up until the entire restore sequence is completed.
3038 16 No The file name "%ls" is invalid as a backup device name. Reissue the BACKUP statement with a valid file name.
3039 16 No Cannot perform a differential backup for file '%ls' because a current file backup does not exist. Reissue BACKUP DATABASE omitting the WITH DIFFERENTIAL option.
3040 10 No An error occurred while informing replication of the backup. The backup will continue, but the replication environment should be inspected.
3041 16 Yes BACKUP failed to complete the command %.*ls. Check the backup application log for detailed messages.
3042 10 No BACKUP WITH CONTINUE_AFTER_ERROR successfully generated a backup of the damaged database. Refer to the SQL Server error log for information about the errors that were encountered.
3043 16 No BACKUP '%ls' detected an error on page (%d:%d) in file '%ls'.
3044 16 No Invalid zero-length device name. Reissue the BACKUP statement with a valid device name.
3045 16 No BACKUP or RESTORE requires the NTFS file system for FILESTREAM and full-text support. The path "%.*ls" is not usable.
3046 16 No Inconsistent metadata has been encountered. The only possible backup operation is a tail-log backup using the WITH CONTINUE_AFTER_ERROR or NO_TRUNCATE option.
3047 16 No The BackupDirectory registry key is not configured correctly. This key should specify the root path where disk backup files are stored when full path names are not provided. This path is also used to locate restart checkpoint files for RESTORE.
3048 16 No BACKUP LOG WITH TRUNCATE_ONLY cannot operate on database '%ls' because it is configured for database mirroring.
3049 16 No BACKUP detected corruption in the database log. Check the errorlog for more information.
3050 16 No SQL Server could not send the differential information for database file '%ls' of database '%ls\%ls' to the backup application because the differential information is too large to fit in memory, and an attempt to use a temporary file has failed.
3051 16 No BACKUP LOG was unable to maintain mirroring consistency for database '%ls'. Database mirroring has been suspended.
3052 16 No BACKUP LOG was unable to log updates for for database '%ls'. Subsequent log backups will be required to advance the backup point from %S_LSN to %S_LSN after log space is made available for logging them.
3053 16 No BACKUP '%ls' detected an error on a page in file '%ls'.
3054 16 No Differential file backups can include only read-only data for databases using the simple recovery model. Consider taking a partial backup by specifying READ_WRITE_FILEGROUPS.
3055 16 No Backup destination "%.*ls" supports a FILESTREAM filegroup. This filegroup cannot be used as a backup destination. Rerun the BACKUP statement with a valid backup destination.
3056 16 No The backup operation has detected an unexpected file in a FILESTREAM container. The backup operation will continue and include file '%ls'.
3057 16 No Invalid device name. The length of the device name provided exceeds supported limit (maximum length is:%d). Reissue the BACKUP statement with a valid device name.
3058 10 No File or device name exceeds the supported limit (maximum length is:%d) and will be truncated: %.*ls.
3059 16 No This BACKUP or RESTORE command is not supported on a database mirror or secondary replica.
3060 10 No The restart-checkpoint file '%ls' was corrupted. The restored database can not be recovered. Restart the RESTORE sequence.
3061 16 No The restart-checkpoint file '%ls' could not be opened. Operating system error '%ls'. Make the file available and retry the operation or, restart the RESTORE sequence.
3062 16 No Cannot backup from a HADRON secondary because it is not in Synchronizing or Synchronized state.
3063 16 No Write to backup block blob device %ls failed. Device has reached its limit of allowed blocks.
3064 16 No Write to backup block blob detected out of order write at offset %ld, last block offset was at %ld.
3065 16 No Attempt to commit the block list for a block blob failed. Blob Name is "%.*ls". Storage Errorcode %ld.
3066 16 No Could not find the database file referenced by the file snapshot %.*ls. Please make sure that the URL points to a valid snapshot on a database file.
3067 16 No Failed while trying to delete file snapshot %.*ls. Error code %ld.
3068 16 No Invalid file snapshot URL. Please make sure that the URL is correctly formed.
3069 16 No Striping a backup set across multiple devices is not permitted for file snapshot backups.
3070 16 No Specifying the WITH options FORMAT and FILE_SNAPSHOT is not permitted.
3071 16 No The database %.*ls is configured for file snapshot point in time restore, log backups are not permitted.
3072 16 No Backup encryption is incompatible with file snapshot backup if TDE is not enabled on the database.
3073 16 No The option WITH FILE_SNAPSHOT is only permitted if all database files are in Azure Storage.
3074 16 No Failed while getting attributes for the file snapshot %.*ls. Error code %ld.
3075 16 No Device name '%.*ls' is not a valid MOVE target when restoring from a File Snapshot Backup.
3076 16 No File Snapshot Backup is only permitted with a single backup device and no additonal mirrored devices.
3077 10 No File snapshot %.*ls not found.
3078 16 No The file name "%ls" is invalid as a backup device name for the specified device type. Reissue the BACKUP statement with a valid file name and device type.
3079 16 No Could not find the blob file %.*ls. Please make sure that the file name points to a valid blob file.
3080 16 No Invalid Backup Path. The length of the default backup path provided exceeds supported limit (maximum length is: %d). Correct the default backup path.
3081 16 No %.*ls '%.*ls' was previously suspended for snapshot backup.
3082 16 No %.*ls '%.*ls' is not suspended for snapshot backup.
3083 10 No Database '%.*ls' acquired suspend locks in session %d.
3084 10 No Database '%.*ls' released suspend locks in session %d.
3085 16 No Database '%.*ls' did not acquire the necessary suspend locks to freeze the database.
3086 10 No %.*ls '%.*ls' successfully suspended for snapshot backup in session %d.
3087 10 No %.*ls '%.*ls' originally suspended for snapshot backup in session %d successfully resumed in session %d.
3088 16 No %.*ls '%.*ls' with dbid %d failed to resume in session %d.
3089 10 No %.*ls '%.*ls' cancelled current resume operation as another resume operation is already in progress.
3090 16 No %.*ls '%.*ls' snapshot backup in progress.
3091 16 No Database '%.*ls' is not allowed to be suspended for snapshot backup.
3092 16 No Database '%.*ls' is specified multiple times in the group snapshot backup statement.
3093 16 No Database count changed while performing snapshot backup. (Expected: %d, Actual: %d).
3094 16 No Server '%.*ls' has no user databases to suspend for snapshot backup.
3095 16 No The backup cannot be performed because 'ENCRYPTION' was requested after the media was formatted with an incompatible structure. To append to this media set, either omit 'ENCRYPTION' or create a new media set by using WITH FORMAT in your BACKUP statement. If you use WITH FORMAT on an existing media set, all its backup sets will be overwritten.
3096 16 No The Certificate specified for backup encryption has expired.
3097 16 No The Backup cannot be performed because the existing media set is formatted with an incompatible version.
3098 16 No The backup cannot be performed because '%ls' was requested after the media was formatted with an incompatible structure. To append to this media set, either omit '%ls' or specify '%ls'. Alternatively, you can create a new media set by using WITH FORMAT in your BACKUP statement. If you use WITH FORMAT on an existing media set, all its backup sets will be overwritten.
3099 16 No Backup Encryption options were specified, Backup Encryption support has not been enabled on this version.
3101 16 No Exclusive access could not be obtained because the database is in use.
3102 16 No %ls cannot process database '%ls' because it is in use by this session. It is recommended that the master database be used when performing this operation.
3103 16 No A partial restore sequence cannot be initiated by this command. To initiate a partial restore sequence, use the WITH PARTIAL clause of the RESTORE statement and provide a backup set which includes a full copy of at least the primary data file. The WITH PARTIAL clause of the RESTORE statement may not be used for any other purpose.
3104 16 No RESTORE cannot operate on database '%ls' because it is configured for database mirroring or has joined an availability group. If you intend to restore the database, use ALTER DATABASE to remove mirroring or to remove the database from its availability group.
3105 16 No RESTORE cannot restore any more pages into file '%ls' because the maximum number of pages (%d) are already being restored. Either complete the restore sequence for the existing pages, or use RESTORE FILE to restore all pages in the file.
3106 16 No The filegroup "%ls" is ambiguous. The identity in the backup set does not match the filegroup that is currently defined in the online database. To force the use of the filegroup in the backup set, take the database offline and then reissue the RESTORE command.
3107 16 No The file "%ls" is ambiguous. The identity in the backup set does not match the file that is currently defined in the online database. To force the use of the file in the backup set, take the database offline and then reissue the RESTORE command.
3108 16 No To restore the master database, the server must be running in single-user mode. For information on starting in single-user mode, see "How to: Start an Instance of SQL Server (sqlservr.exe)" in Books Online.
3109 16 No Master can only be restored and fully recovered in a single step using a full database backup. Options such as NORECOVERY, STANDBY, and STOPAT are not supported.
3110 14 No User does not have permission to RESTORE database '%.*ls'.
3111 16 No Page %S_PGID is a control page which cannot be restored in isolation. To repair this page, the entire file must be restored.
3112 16 No Cannot restore any database other than master when the server is in single user mode.
3113 16 No Invalid data was detected.
3115 16 No The database is using the simple recovery model. It is not possible to restore a subset of the read-write data.
3116 16 No The supplied backup is not on the same recovery path as the database, and is ineligible for use for an online file restore.
3117 16 No The log or differential backup cannot be restored because no files are ready to rollforward.
3118 16 No The database "%ls" does not exist. RESTORE can only create a database when restoring either a full backup or a file backup of the primary file.
3119 16 No Problems were identified while planning for the RESTORE statement. Previous messages provide details.
3120 16 No This backup set will not be restored because all data has already been restored to a point beyond the time covered by this backup set.
3121 16 No The file "%ls" is on a recovery path that is inconsistent with application of this backup set. RESTORE cannot continue.
3122 16 No File initialization failed. RESTORE cannot continue.
3123 16 No Invalid database name '%.*ls' specified for backup or restore operation.
3125 16 No The database is using the simple recovery model. The data in the backup it is not consistent with the current state of the database. Restoring more data is required before recovery is possible. Either restore a full file backup taken since the data was marked read-only, or restore the most recent base backup for the target data followed by a differential file backup.
3127 16 Yes The file '%.*ls' of restored database '%ls' is being left in the defunct state because the database is using the simple recovery model and the file is marked for read-write access. Therefore, only read-only files can be recovered by piecemeal restore.
3128 16 No File '%ls' has an unsupported page size (%d).
3129 16 No The contents of the file "%ls" are not consistent with a transition into the restore sequence. A restore from a backup set may be required.
3130 10 No The filegroup "%ls" is selected. At the time of backup it was known by the name "%ls"'. RESTORE will continue operating upon the renamed filegroup.
3131 10 No The file "%ls" is selected. At the time of backup it was known by the name "%ls". RESTORE will continue operating upon the renamed file.
3132 16 No The media set has %d media families but only %d are provided. All members must be provided.
3133 16 No The volume on device "%ls" is sequence number %d of media family %d, but sequence number %d of media family %d is expected. Check that the device specifications and loaded media are correct.
3134 10 Yes The differential base attribute for file '%ls' of database '%ls' has been reset because the file has been restored from a backup taken on a conflicting recovery path. The restore was allowed because the file was read-only and was consistent with the current status of the database. Any future differential backup of this file will require a new differential base.
3135 16 No The backup set in file '%ls' was created by %hs and cannot be used for this restore operation.
3136 16 No This differential backup cannot be restored because the database has not been restored to the correct earlier state.
3137 16 No Database cannot be reverted. Either the primary or the snapshot names are improperly specified, all other snapshots have not been dropped, or there are missing files.
3138 16 No The database cannot be reverted because FILESTREAM BLOBs are present.
3139 16 No Restore to snapshot is not allowed with the master database.
3140 16 No Could not adjust the space allocation for file '%ls'.
3141 16 No The database to be restored was named '%ls'. Reissue the statement using the WITH REPLACE option to overwrite the '%ls' database.
3142 16 No File "%ls" cannot be restored over the existing "%ls". Reissue the RESTORE statement using WITH REPLACE to overwrite pre-existing files, or WITH MOVE to identify an alternate location.
3143 16 No The data set on device '%ls' is not a SQL Server backup set.
3144 16 No File '%.*ls' was not backed up in file %d on device '%ls'. The file cannot be restored from this backup set.
3145 16 No The STOPAT option is not supported for databases that use the SIMPLE recovery model.
3147 16 No Backup and restore operations are not allowed on database tempdb.
3148 16 No This RESTORE statement is invalid in the current context. The 'Recover Data Only' option is only defined for secondary filegroups when the database is in an online state. When the database is in an offline state filegroups cannot be specified.
3149 16 No The file or filegroup "%ls" is not in a valid state for the "Recover Data Only" option to be used. Only secondary files in the OFFLINE or RECOVERY_PENDING state can be processed.
3150 10 No The master database has been successfully restored. Shutting down SQL Server.
3151 21 Yes Failed to restore master database. Shutting down SQL Server. Check the error logs, and rebuild the master database. For more information about how to rebuild the master database, see SQL Server Books Online.
3153 16 No The database is already fully recovered.
3154 16 No The backup set holds a backup of a database other than the existing '%ls' database.
3155 16 No The RESTORE operation cannot proceed because one or more files have been added or dropped from the database since the backup set was created.
3156 16 No File '%ls' cannot be restored to '%ls'. Use WITH MOVE to identify a valid location for the file.
3159 16 No The tail of the log for the database "%ls" has not been backed up. Use BACKUP LOG WITH NORECOVERY to backup the log if it contains work you do not want to lose. Use the WITH REPLACE or WITH STOPAT clause of the RESTORE statement to just overwrite the contents of the log.
3161 16 No The primary file is unavailable. It must be restored or otherwise made available.
3163 16 No The transaction log was damaged. All data files must be restored before RESTORE LOG can be attempted.
3165 16 No Database '%ls' was restored, however an error was encountered while replication was being restored/removed. The database has been left offline. See the topic MSSQL_ENG003165 in SQL Server Books Online.
3166 16 No RESTORE DATABASE could not drop database '%ls'. Drop the database and then reissue the RESTORE DATABASE statement.
3167 16 No RESTORE could not start database '%ls'.
3168 16 No The backup of the system database on the device %ls cannot be restored because it was created by a different version of the server (%ls) than this server (%ls).
3169 16 No The database was backed up on a server running database version %d. That version is incompatible with this server, which supports version %d. Either restore the database on a server that supports the backup, or use a backup that is compatible with this server.
3170 16 No The STANDBY filename is invalid.
3171 16 No File %ls is defunct and cannot be restored into the online database.
3172 16 No Filegroup %ls is defunct and cannot be restored into the online database.
3173 16 No The STOPAT clause provided with this RESTORE statement indicates that the tail of the log contains changes that must be backed up to reach the target point in time. The tail of the log for the database "%ls" has not been backed up. Use BACKUP LOG WITH NORECOVERY to back up the log, or use the WITH REPLACE clause in your RESTORE statement to overwrite the tail of the log.
3174 16 No The file '%ls' cannot be moved by this RESTORE operation.
3175 10 No RESTORE FILEGROUP="%ls" was specified, but not all of its files are present in the backup set. File "%ls" is missing. RESTORE will continue, but if you want all files to be restored, you must restore other backup sets.
3176 16 No File '%ls' is claimed by '%ls'(%d) and '%ls'(%d). The WITH MOVE clause can be used to relocate one or more files.
3178 16 No File %ls is not in the correct state to have this differential backup applied to it.
3179 16 No The system database cannot be moved by RESTORE.
3180 16 No This backup cannot be restored using WITH STANDBY because a database upgrade is needed. Reissue the RESTORE without WITH STANDBY.
3181 10 No Attempting to restore this backup may encounter storage space problems. Subsequent messages will provide details.
3182 16 No The backup set cannot be restored because the database was damaged when the backup occurred. Salvage attempts may exploit WITH CONTINUE_AFTER_ERROR.
3183 16 No RESTORE detected an error on page (%d:%d) in database "%ls" as read from the backup set.
3184 10 No RESTORE WITH CONTINUE_AFTER_ERROR was successful but some damage was encountered. Inconsistencies in the database are possible.
3185 16 No RESTORE cannot apply this backup set because the database is suspect. Restore a backup set that repairs the damage.
3186 16 No The backup set has been damaged. RESTORE will not attempt to apply this backup set.
3187 16 No RESTORE WITH CHECKSUM cannot be specified because the backup set does not contain checksum information.
3188 10 No The backup set was written with damaged data by a BACKUP WITH CONTINUE_AFTER_ERROR.
3189 16 No Damage to the backup set was detected.
3190 16 No Filegroup '%ls' cannot be restored because it does not exist in the backup set.
3191 16 No Restore cannot continue because file '%ls' cannot be written. Ensure that all files in the database are writable.
3192 10 No Restore was successful but deferred transactions remain. These transactions cannot be resolved because there are data that is unavailable. Either use RESTORE to make that data available or drop the filegroups if you never need this data again. Dropping the filegroup results in a defunct filegroup.
3193 16 No Restore Log operations are not permitted for a Log Backup with FILE_SNAPSHOT if bulk operations were present during the backup period. The Restore can be accomplished by issuing Restore Database from this archive.
3194 16 No Page %S_PGID is beyond the end of the file. Only pages that are in the current range of the file can be restored.
3195 16 No Page %S_PGID cannot be restored from this backup set. RESTORE PAGE can only be used from full backup sets or from the first log or differential backup taken since the file was added to the database.
3196 16 No RESTORE master WITH SNAPSHOT is not supported. To restore master from a snapshot backup, stop the service and copy the data and log file.
3197 10 Yes I/O is frozen on database %ls. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup.
3198 10 Yes I/O was resumed on database %ls. No user action is required.
3199 16 No RESTORE requires MAXTRANSFERSIZE=%u but %u was specified.
3201 16 No Cannot open backup device '%ls'. Operating system error %ls.
3202 16 No Write on "%ls" failed: %ls
3203 16 No Read on "%ls" failed: %ls
3204 16 No The backup or restore was aborted.
3205 16 No Too many backup devices specified for backup or restore; only %d are allowed.
3206 16 No Backup device '%.*ls' does not exist. To view existing backup devices, use the sys.backup_devices catalog view. To create a new backup device use either sp_addumpdevice or SQL Server Management Studio.
3207 16 No Backup or restore requires at least one backup device. Rerun your statement specifying a backup device.
3208 16 No Unexpected end of file while reading beginning of backup set. Confirm that the media contains a valid SQL Server backup set, and see the console error log for more details.
3209 16 No Operation is not supported on user instances.
3210 16 No The mirror member in drive "%ls" is inconsistent with the mirror member in drive "%ls".
3211 10 No %d percent processed.
3212 16 No The mirror device "%ls" and the mirror device "%ls" have different device specifications.
3213 16 No Unable to unload one or more tapes. See the error log for details.
3214 16 No Too many backup mirrors are specified. Only %d are allowed.
3215 16 No Use WITH FORMAT to create a new mirrored backup set.
3216 16 No RESTORE REWINDONLY is only applicable to tape devices.
3217 16 No Invalid value specified for %ls parameter.
3218 16 No Backup mirroring is not available in this edition of SQL Server. See Books Online for more details on feature support in different SQL Server editions.
3219 16 No The file or filegroup "%.*ls" cannot be selected for this operation.
3220 16 No The specified URL points to a Block Blob. Backup and Restore operations on Block Blobs are not supported when WITH CREDENTIAL syntax is used.
3221 16 No The ReadFileEx system function executed on file '%ls' only read %d bytes, expected %d.
3222 16 No The WriteFileEx system function executed on file '%ls' only wrote %d bytes, expected %d.
3223 16 No Backup To URL failed to write status messages to the operating system error log.
3224 16 No Cannot create worker thread.
3225 16 No Use of WITH CREDENTIAL syntax is not valid for credentials containing a Shared Access Signature.
3226 16 No Failed to create snapshot for file "%ls".
3227 16 No The backup media on "%ls" is part of media family %d which has already been processed on "%ls". Ensure that backup devices are correctly specified. For tape devices, ensure that the correct volumes are loaded.
3228 16 No Writing snapshot metadata to backup set for file "%ls" failed due to invalid format.
3229 16 No Request for device '%ls' timed out.
3230 16 No Operation on device '%ls' exceeded retry count.
3231 16 No The media loaded on "%ls" is formatted to support %d media families, but %d media families are expected according to the backup device specification.
3232 16 No The volume mounted on "%ls" does not have the expected backup set identity. The volume may be obsolete due to a more recent overwrite of this media family. In that case, locate the correct volume with sequence number %d of media family %d.
3233 16 No Invalid Identity Specified for the S3 Credential. Credential Identity should be S3 Access Key.
3234 16 No Logical file '%.*ls' is not part of database '%ls'. Use RESTORE FILELISTONLY to list the logical file names.
3235 16 No The file "%.*ls" is not part of database "%ls". You can only list files that are members of this database.
3236 16 No Write to S3 object storage device %ls failed. Device has reached its limit of %d allowed parts.
3238 16 No The Estimate for the Backup size exceeds the maximum allowed file size on the remote endpoint.
3239 16 No The backup set on device '%ls' uses a feature of the Microsoft Tape Format not supported by SQL Server.
3240 16 No Backup to mirrored media sets requires all mirrors to append. Provide all members of the set, or reformat a new media set.
3241 16 No The media family on device '%ls' is incorrectly formed. SQL Server cannot process this media family.
3242 16 No The file on device '%ls' is not a valid Microsoft Tape Format backup set.
3243 16 No The media family on device '%ls' was created using Microsoft Tape Format version %d.%d. SQL Server supports version %d.%d.
3244 16 No Descriptor block size exceeds %d bytes. Use a shorter name and/or description string and retry the operation.
3245 16 No Could not convert a string to or from Unicode, %ls.
3246 16 No The media family on device '%ls' is marked as nonappendable. Reissue the statement using the INIT option to overwrite the media.
3247 16 No The volume on device '%ls' has the wrong media sequence number (%d). Remove it and insert volume %d.
3249 16 No The volume on device '%ls' is a continuation volume for the backup set. Remove it and insert the volume holding the start of the backup set.
3250 16 No The value '%d' is not within range for the %ls parameter.
3251 10 No The media family on device '%ls' is complete. The device is now being reused for one of the remaining families.
3252 16 No Failed to copy snapshot with name '%ls', timestamp '%ls' to destination '%ls'. Error returned '%ls'.
3253 16 No The block size parameter must supply a value that is a power of 2.
3254 16 No The volume on device '%ls' is empty.
3255 16 No The data set on device '%ls' is a SQL Server backup set not compatible with this version of SQL Server.
3256 16 No The backup set on device '%ls' was terminated while it was being created and is incomplete. RESTORE sequence is terminated abnormally.
3257 16 No There is insufficient free space on disk volume '%ls' to create the database. The database requires %I64u additional free bytes, while only %I64u bytes are available.
3258 16 No The volume on the device "%ls" is not part of the media set that is currently being processed. Ensure that the backup devices are loaded with the correct media.
3259 16 No Failed to copy blob with name '%ls', to destination '%ls'. Error returned '%ls'.
3260 16 No An internal buffer has become full.
3261 16 No SQL Server cannot use the virtual device configuration.
3262 10 No The backup set on file %d is valid.
3263 16 No Cannot use the volume on device '%ls' as a continuation volume. It is sequence number %d of family %d for the current media set. Insert a new volume, or sequence number %d of family %d for the current set.
3264 16 No The operation did not proceed far enough to allow RESTART. Reissue the statement without the RESTART qualifier.
3265 16 No The login has insufficient authority. Membership of the sysadmin role is required to use VIRTUAL_DEVICE with BACKUP or RESTORE.
3266 16 Yes The backup data at the end of "%ls" is incorrectly formatted. Backup sets on the media might be damaged and unusable. To determine the backup sets on the media, use RESTORE HEADERONLY. To determine the usability of the backup sets, run RESTORE VERIFYONLY. If all of the backup sets are incomplete, reformat the media using BACKUP WITH FORMAT, which destroys all the backup sets.
3267 16 No Insufficient resources to create UMS scheduler.
3268 16 No Cannot use the backup file '%ls' because it was originally formatted with sector size %d and is now on a device with sector size %d.
3269 16 No Cannot restore the file '%ls' because it was originally written with sector size %d; '%ls' is now on a device with sector size %d.
3270 16 No An internal consistency error has occurred. This error is similar to an assert. Contact technical support for assistance.
3271 16 No A nonrecoverable I/O error occurred on file "%ls:" %ls.
3272 16 No The '%ls' device has a hardware sector size of %d, but the block size parameter specifies an incompatible override value of %d. Reissue the statement using a compatible block size.
3273 16 No The ambiguity for master has be detected. please specify PHYSMASTER or replicatedmaster database explicitly in action '%ls'.
3276 16 No WITH SNAPSHOT can be used only if the backup set was created WITH SNAPSHOT.
3277 16 No WITH SNAPSHOT must be used with only one device.
3278 16 No Failed to encrypt string %ls
3279 16 No Access is denied due to a password failure
3280 16 No Backups on raw devices are not supported. '%ls' is a raw device.
3281 10 No Released and initiated rewind on '%ls'.
3283 16 No The file "%ls" failed to initialize correctly. Examine the error logs for more details.
3284 16 No Filemark on device '%ls' is not aligned. Re-issue the Restore statement with the same blocksize used to create the backupset: '%d' looks like a possible value.
3285 10 No Filemark on device '%ls' appears not to be aligned. The restore operation will proceed using less efficient I/O. To avoid this, re-issue the Restore statement with the same blocksize used to create the backupset: '%d' looks like a possible value.
3286 16 No Backup failed because there is a mismatch in file metadata for file %d.
3287 16 No The file ID %d on device '%ls' is incorrectly formed and can not be read.
3288 16 No Credential name %.*ls does not exist or user does not have permission to access it.
3289 16 No A Backup device of type URL was specified without a Credential, Backup/Restore operation cannot proceed.
3290 16 No Backup to URL received an exception from the remote endpoint. Exception Message: %.*ls
3291 16 No URL device type was specified, and a disallowed option %ls was specified.
3292 16 No A failure occurred while attempting to execute Backup or Restore with a URL device specified. Consult the operating system error log for details.
3293 16 No An error occurred while Backup/Restore to URL was initializing. Error message: %.*ls.
3294 16 No Use of the URL device type is limited to a single device during Backup and Restore operations.
3295 16 No Backup To URL error: Exclusive access to the file %.*ls could not be obtained.
3296 16 No The file %.*ls exists on the remote endpoint, and WITH FORMAT was not specified. Backup cannot proceed.
3297 16 No The URL provided does not meet specified requirements. The URL must be either resolvable as an absolute or relative URI, has or can be composed as an HTTP or HTTPS scheme, and cannot contain a query component.
3298 16 No Backup/Restore to URL device error: %.*ls.
3299 16 No BackupToUrl initiated.
3301 21 Yes The transaction log contains a record (logop %d) that is not valid. The log has been corrupted. Restore the database from a full backup, or repair the database.
3302 21 Yes Redoing of logged operations in database '%.*ls' failed to reach end of log at log record ID %S_LSN. This indicates corruption around log record ID %S_LSN. Restore the database from a full backup, or repair the database.
3303 10 Yes Remote harden of transaction '%.*ls' (ID 0x%016I64x %ls) started at %S_DATE in database '%ls' at LSN %S_LSN failed.
3313 21 Yes During redoing of a logged operation in database '%.*ls' (page %S_PGID if any), an error occurred at log record ID %S_LSN. Typically, the specific failure is previously logged as an error in the operating system error log. Restore the database from a full backup, or repair the database.
3314 21 Yes During undoing of a logged operation in database '%.*ls' (page %S_PGID if any), an error occurred at log record ID %S_LSN. Typically, the specific failure is logged previously as an error in the operating system error log. Restore the database or file from a backup, or repair the database.
3315 21 Yes During rollback, the following process did not hold an expected lock: process %d with mode %d at level %d for row %S_RID in database '%.*ls' under transaction %S_XID. Restore a backup of the database, or repair the database.
3316 21 Yes During undo of a logged operation in database '%.*ls', an error occurred at log record ID %S_LSN. The row was not found. Restore the database from a full backup, or repair the database.
3401 10 Yes Errors occurred during recovery while rolling back a transaction. The transaction was deferred. Restore the bad page or file, and re-run recovery.
3402 10 Yes The database '%ls' is marked %ls and is in a state that does not allow recovery to be run.
3403 10 Yes Recovering only master database because traceflag 3608 was specified. This is an informational message only. No user action is required.
3404 10 Yes Failed to check for new installation or a renamed server at startup. The logic for this check has failed unexpectedly. Run setup again, or fix the problematic registry key.
3406 10 Yes %d transactions rolled forward in database '%.*ls' (%d:%d). This is an informational message only. No user action is required.
3407 10 Yes %d transactions rolled back in database '%.*ls' (%d:%d). This is an informational message only. No user action is required.
3408 10 Yes Recovery is complete. This is an informational message only. No user action is required.
3409 16 Yes Performance counter shared memory setup failed with error %d. Reinstall sqlctr.ini for this instance, and ensure that the instance login account has correct registry permissions.
3410 10 Yes Data in filegroup %s is offline, and deferred transactions exist. Use RESTORE to recover the filegroup, or drop the filegroup if you never intend to recover it. Log truncation cannot occur until this condition is resolved.
3411 21 Yes Configuration block version %d is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
3412 10 Yes Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically. After the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
3413 21 Yes Database ID %d. Could not mark database as suspect. Getnext NC scan on sys.databases.database_id failed. Refer to previous errors in the error log to identify the cause and correct any associated problems.
3414 10 Yes An error occurred during recovery, preventing the database '%ls' (%d:%d) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
3415 16 Yes Database '%.*ls' cannot be upgraded because it is read-only, has read-only files or the user does not have permissions to modify some of the files. Make the database or files writeable, and rerun recovery.
3416 16 Yes The server contains read-only files that must be made writable before the server can be recollated.
3417 21 Yes Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
3418 10 Yes Recovery is unable to defer error %d. Errors can only be deferred in databases using the full recovery model and an active backup log chain.
3419 16 Yes Recovery for database '%.*ls' is being skipped because it requires an upgrade but is marked for Standby. Use RESTORE DATABASE WITH NORECOVERY to take the database back to a Restoring state and continue the restore sequence.
3420 21 Yes Database snapshot '%ls' has failed an IO operation and is marked suspect. It must be dropped and recreated.
3421 10 Yes Recovery completed for database %ls (database ID %d) in %I64d second(s) (analysis %I64d ms, redo %I64d ms, undo %I64d ms [system undo %I64d ms, regular undo %I64d ms].) ADR-enabled=%d, Is primary=%d, OL-Enabled=%d. This is an informational message only. No user action is required.
3422 10 Yes Database %ls was shutdown due to error %d in routine '%hs'. Restart for non-snapshot databases will be attempted after all connections to the database are aborted.
3423 10 Yes Info: The server instance was started using multiuser, minimal configuration startup option (-M).
3429 10 Yes Recovery could not determine the outcome of a cross-database transaction %S_XID, named '%.*ls', in database '%.*ls' (database ID %d:%d). The coordinating database (database ID %d:%d) was unavailable. The transaction was assumed to be committed. If the transaction was not committed, you can retry recovery when the coordinating database is available.
3431 21 Yes Could not recover database '%.*ls' (database ID %d) because of unresolved transaction outcomes. Microsoft Distributed Transaction Coordinator (MS DTC) transactions were prepared, but MS DTC was unable to determine the resolution. To resolve, either fix MS DTC, restore from a full backup, or repair the database.
3434 20 Yes Cannot change sort order or locale. An unexpected failure occurred while trying to reindex the server to a new collation. SQL Server is shutting down. Restart SQL Server to continue with the sort order unchanged. Diagnose and correct previous errors and then retry the operation.
3437 21 Yes An error occurred while recovering database '%.*ls'. Unable to connect to Microsoft Distributed Transaction Coordinator (MS DTC) to check the completion status of transaction %S_XID. Fix MS DTC, and run recovery again.
3441 21 Yes During startup of warm standby database '%.*ls' (database ID %d), its standby file ('%ls') was inaccessible to the RESTORE statement. The operating system error was '%ls'. Diagnose the operating system error, correct the problem, and retry startup.
3443 21 Yes Database '%ls' (database ID %d:%d) was marked for standby or read-only use, but has been modified. The RESTORE LOG statement cannot be performed. Restore the database from a backup.
3445 21 Yes File '%ls' is not a valid undo file for database '%.*ls (database ID %d). Verify the file path, and specify the correct file.
3446 16 No Primary log file is not available for database '%ls' (%d:%d). The log cannot be backed up.
3447 16 No Could not activate or scan all of the log files for database '%.*ls'.
3448 21 Yes Rollback encountered a page with a log sequence number (LSN) less than the original log record LSN. Could not undo log record %S_LSN, for transaction ID %S_XID, on page %S_PGID, database '%ls' (%d:%d). Page information: LSN = %S_LSN, type = %ld. Log information: OpCode = %ld, context %ld. Restore or repair the database.
3449 21 Yes SQL Server must shut down in order to recover a database (database ID %d). The database is either a user database that could not be shut down or a system database. Restart SQL Server. If the database fails to recover after another startup, repair or restore the database.
3450 10 Yes Recovery of database '%.*ls' (%d) is %d%% complete (approximately %d seconds remain). Phase %d of 3. This is an informational message only. No user action is required.
3452 10 Yes Recovery of database '%.*ls' (%d) detected possible identity value inconsistency in table ID %d. Run DBCC CHECKIDENT ('%.*ls').
3453 16 No This version cannot redo any index creation or non-logged operation done by SQL Server 7.0. Further roll forward is not possible.
3454 10 Yes Recovery is writing a checkpoint in database '%.*ls' (%d). This is an informational message only. No user action is required.
3456 21 Yes Could not redo log record %S_LSN, for transaction ID %S_XID, on page %S_PGID, allocation unit %I64d, database '%.*ls' (database ID %d). Page: LSN = %S_LSN, allocation unit = %I64d, type = %ld. Log: OpCode = %ld, context %ld, PrevPageLSN: %S_LSN. Restore from a backup of the database, or repair the database.
3457 21 Yes Transactional file system resource manager '%.*ls' failed to recover. For more information, see the accompanying error message, which determines the appropriate user action.
3458 16 No Recovery cannot scan database "%.*ls" for dropped allocation units because an unexpected error has occurred. These allocation units cannot be cleaned up.
3459 16 No Recovery of database "%.*ls" failed to redo a file add for file "%.*ls". Please delete the file and retry.
3460 21 Yes Failed to shutdown a database (database ID %d) that contains memory-optimized data. Restart SQL Server to bring the database to a consistent state. If the database fails to recover after restart, repair or restore the database.
3461 21 Yes Failed to wait for XTP %ls to complete during recovery.
3462 10 Yes Redo observed a higher LSN on the PFS page %S_PGID for transaction ID %S_XID, database '%.*ls' (database ID %d). Redo LSN: %S_LSN, Page: LSN = %S_LSN, PrevPageLSN: %S_LSN. This can happen in the presence of concurrent PFS updates. No user action is required.
3463 21 Yes An error occurred while recovering database '%.*ls'. Transaction outcome could not be resolved.
3464 16 Yes An error occurred while resolving the deferred transaction. Transaction outcome: %d, IsDeferred: %ls.
3465 16 Yes An error occurred while resolving the deferred transaction. Transaction not found.
3466 10 No Restore was successful but deferred transactions remain. These transactions cannot be resolved because there are data or keys in the enclave that is unavailable. Either use sp_enclave_send_keys to send keys to the enclave, or use RESTORE to make that data available or drop the filegroups if you never need this data again. Dropping the filegroup results in a defunct filegroup.
3467 10 No Restore was successful but deferred transactions remain. These transactions cannot be resolved because there are data or keys in the enclave that is unavailable. For keys, since there is no enclave configured, SQL may resolve deferred transactions by invalidating indexes on encrypted columns; please check the error log.For the data, either use RESTORE to make that data available or drop the filegroups if you never need this data again. Dropping the filegroup results in a defunct filegroup.
3468 21 Yes An error occurred while attempting to apply a log record. This could indicate log or database corruption. Additional messages in the SQL Server error log may provide more detail.
3469 21 No Restore failed due to items not being found in the expected restore pipeline queues.
3505 14 No Only the owner of database "%.*ls" or someone with relevant permissions can run the CHECKPOINT statement.
3604 10 No Duplicate key was ignored.
3605 16 No Schema verification failed for database '%.*ls'.
3606 10 No Arithmetic overflow occurred.
3607 10 No Division by zero occurred.
3608 16 No Cannot allocate a GUID for the token.
3609 16 No The transaction ended in the trigger. The batch has been aborted.
3611 10 No %hs SQL Server Execution Times:%hs CPU time not measured under fiber mode, elapsed time = %lu ms.
3612 10 No %hs SQL Server Execution Times:%hs CPU time = %lu ms, elapsed time = %lu ms.
3613 10 No SQL Server parse and compile time: %hs CPU time = %lu ms, elapsed time = %lu ms.
3615 10 No Table '%.*ls'. Scan count %d, logical reads %d, physical reads %d, page server reads %d, read-ahead reads %d, page server read-ahead reads %d, lob logical reads %d, lob physical reads %d, lob page server reads %d, lob read-ahead reads %d, lob page server read-ahead reads %d.
3616 16 No An error was raised during trigger execution. The batch has been aborted and the user transaction, if any, has been rolled back.
3619 10 Yes Could not write a checkpoint record in database %ls because the log is out of space. Contact the database administrator to truncate the log or allocate more space to the database log files.
3620 10 Yes Automatic checkpointing is disabled in database '%.*ls' because the log is out of space. Automatic checkpointing will be enabled when the database owner successfully checkpoints the database. Contact the database owner to either truncate the log file or add more disk space to the log. Then retry the CHECKPOINT statement.
3621 10 No The statement has been terminated.
3622 10 No Warning: An invalid floating point operation occurred.
3623 16 No An invalid floating point operation occurred.
3624 20 Yes A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a Hotfix from Technical Support.
3625 20 Yes '%hs' is not yet implemented.
3627 17 Yes New parallel operation cannot be started due to too many parallel operations executing at this time. Use the "max worker threads" configuration option to increase the number of allowable threads, or reduce the number of parallel operations running on the system.
3628 24 Yes The Database Engine received a floating point exception from the operating system while processing a user request. Try the transaction again. If the problem persists, contact your system administrator.
3633 16 Yes The operating system returned the error '%ls' while attempting '%ls' on '%ls' at '%hs'(%d).
3634 16 Yes The operating system returned the error '%ls' while attempting '%ls' on '%ls'.
3635 16 Yes An error occurred while processing '%ls' metadata for database id %d, file id %d, and transaction='%.*ls'. Additional Context='%ls'. Location='%hs'(%d). Retry the operation; if the problem persists, contact the database administrator to review locking and memory configurations. Review the application for possible deadlock conflicts.
3636 16 No An error occurred while processing '%ls' metadata for database id %d file id %d.
3637 16 No A parallel operation cannot be started from a DAC connection.
3641 10 No Total logical reads %lu, physical reads %lu, remote reads %lu, writes %lu.
3642 10 No Table '%.*ls'. Segment reads %u, segment skipped %u.
3643 16 No The operation elapsed time exceeded the maximum time specified for this operation. The execution has been stopped.
3644 10 No Prefaulter task failed for file %ls with error %d.
3701 11 No Cannot %S_MSG the %S_MSG '%.*ls', because it does not exist or you do not have permission.
3702 16 No Cannot drop database "%.*ls" because it is currently in use.
3703 16 No Cannot detach the %S_MSG '%.*ls' because it is currently in use.
3705 16 No Cannot use DROP %ls with '%.*ls' because '%.*ls' is a %S_MSG. Use %ls.
3706 16 No Cannot %S_MSG a database snapshot.
3707 16 No Cannot detach a suspect or recovery pending database. It must be repaired or dropped.
3708 16 No Cannot %S_MSG the %S_MSG '%.*ls' because it is a system %S_MSG.
3709 16 No Cannot %S_MSG the database while the database snapshot "%.*ls" refers to it. Drop that database first.
3710 16 No Cannot detach an opened database when the server is in minimally configured mode.
3716 16 No The %S_MSG '%.*ls' cannot be dropped because it is bound to one or more %S_MSG.
3717 16 No Cannot drop a default constraint by DROP DEFAULT statement. Use ALTER TABLE to drop a constraint default.
3718 11 No Could not drop index '%.*ls' because the table or clustered index entry cannot be found in the sysindexes system table.
3721 16 No Type '%.*ls' cannot be renamed because it is being referenced by object '%.*ls'.
3722 16 No Task has been aborted, but %S_MSG of the %S_MSG '%.*ls' may continue in the background. Please check whether the %S_MSG has finished successfully.
3723 16 No An explicit DROP INDEX is not allowed on index '%.*ls'. It is being used for %ls constraint enforcement.
3724 16 No Cannot %S_MSG the %S_MSG '%.*ls' because it is being used for replication.
3725 16 No The constraint '%.*ls' is being referenced by table '%.*ls', foreign key constraint '%.*ls'.
3726 16 No Could not drop object '%.*ls' because it is referenced by a FOREIGN KEY constraint.
3727 10 No Could not drop constraint. See previous errors.
3728 16 No '%.*ls' is not a constraint.
3729 16 No Cannot %ls '%.*ls' because it is being referenced by object '%.*ls'.
3730 16 No Cannot drop the default constraint '%.*ls' while it is being used by a foreign key as SET DEFAULT referential action.
3732 16 No Cannot drop type '%.*ls' because it is being referenced by object '%.*ls'. There may be other objects that reference this type.
3733 16 No Constraint '%.*ls' does not belong to table '%.*ls'.
3734 16 No Could not drop the primary key constraint '%.*ls' because the table has an XML or spatial index.
3735 16 No The primary key constraint '%.*ls' on table '%.*ls' cannot be dropped because change tracking is enabled on the table. Change tracking requires a primary key constraint on the table. Disable change tracking before dropping the constraint.
3736 16 No Cannot drop the %S_MSG '%.*ls' because it is being used for distribution.
3737 16 No Could not delete file '%ls'. See the SQL Server error log for more information.
3738 10 No Deleting database file '%ls'.
3739 11 No Cannot %ls the index '%.*ls' because it is not a statistics collection.
3740 16 No Cannot drop the %S_MSG '%.*ls' because at least part of the table resides on a read-only filegroup.
3741 16 No Cannot drop the %S_MSG '%.*ls' because at least part of the table resides on an offline filegroup.
3743 16 No The database '%.*ls' is enabled for database mirroring. Database mirroring must be removed before you drop the database.
3744 16 No Only a single clause is allowed in a statement where an index is dropped online.
3745 16 No Only a clustered index can be dropped online.
3746 16 No Cannot drop the clustered index of view '%.*ls' because the view is being used for replication.
3747 16 No Cannot drop a clustered index created on a view using drop clustered index clause. Clustered index '%.*ls' is created on view '%.*ls'.
3748 16 No Cannot drop non-clustered index '%.*ls' using drop clustered index clause.
3749 16 No Cannot drop XML Index '%.*ls' using old 'Table.Index' syntax, use 'Index ON Table' syntax instead.
3750 10 No Warning: Index '%.*ls' on %S_MSG '%.*ls' was disabled as a result of disabling the clustered index on the %S_MSG.
3751 16 No Cannot use SP_DROPEXTENDEDPROC or DBCC DROPEXTENDEDPROC with '%.*ls' because '%.*ls' is a %S_MSG. Use %ls.
3752 16 No The database '%.*ls' is currently joined to an availability group. Before you can drop the database, you need to remove it from the availability group.
3754 16 No TRUNCATE TABLE statement failed. Index '%.*ls' uses partition function '%.*ls', but table '%.*ls' uses non-equivalent partition function '%.*ls'. Index and table must use an equivalent partition function.
3755 16 No Cannot drop a database with file snapshots on it. Please detach the database instead of dropping or delete the file snapshots and retry the drop.
3756 16 No TRUNCATE TABLE statement failed. Index '%.*ls' is not partitioned, but table '%.*ls' uses partition function '%.*ls'. Index and table must use an equivalent partition function.
3757 16 No WAIT_AT_LOW_PRIORITY clause is not permitted without ONLINE = ON option, for drop clustered %S_MSG '%.*ls' on Table '%.*ls'.
3758 16 No Multiple %S_MSG cannot be dropped when WAIT_AT_LOW_PRIORITY clause is specified.
3759 16 No %.*ls constraint '%.*ls' cannot be dropped when WAIT_AT_LOW_PRIORITY clause is used.
3760 16 No Cannot drop index '%.*ls' on view '%.*ls' that has SNAPSHOT_MATERIALIZATION.
3761 16 No Could not delete SBS backed file '%ls'. See the SQL Server error log for more information.
3762 16 No Cannot drop database '%.*ls' because of temporary unavailability. Please try again later.
3763 16 No Cannot %S_MSG the %S_MSG '%.*ls' because it is being used for Change Feed.
3764 16 No Cannot %S_MSG the %S_MSG '%.*ls' because it is being used for Change Data Capture.
3800 16 No Column name '%.*ls' is not sufficiently different from the names of other columns in the table '%.*ls'.
3801 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" may be impacted by the collation upgrade. Run DBCC CHECKTABLE.
3802 10 No Warning: The constraint "%.*ls" on "%.*ls"."%.*ls" may be impacted by the collation upgrade. Disable and enable WITH CHECK.
3803 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" is disabled because the implementation of the checksum function has changed.
3804 10 No Warning: The check constraint "%.*ls" on table "%.*ls"."%.*ls" is disabled because the implementation of the checksum function has changed.
3805 10 No Warning: Index "%.*ls" on table "%.*ls"."%.*ls" might be corrupted because it references computed column "%.*ls" containing a non-deterministic conversion from string to date. Run DBCC CHECKTABLE to verify index. Consider using explicit CONVERT with deterministic date style such as 121. Computed column indexes referencing non-deterministic expressions can't be created in 90 compatibility mode. See Books Online topic "Creating Indexes on Computed Columns" for more information.
3806 10 No Warning: Indexed view "%.*ls"."%.*ls" might be corrupted because it contains a non-deterministic conversion from string to date. Run DBCC CHECKTABLE to verify view. Consider using explicit CONVERT with deterministic date style such as 121. Indexed views referencing non-deterministic expressions can't be created in 90 compatibility mode. See Books Online topic "Creating Indexed Views" for more information.
3807 17 No Create failed because all available identifiers have been exhausted.
3808 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" is disabled because the index is defined on a view with ignore_dup_key index option. Drop the index and, if possible, recreate it without ignore_dup_key option. You may need to change the logical structure of the view to ensure all rows are unique.
3809 16 No Upgrade of database "%.*ls" failed because index "%.*ls" on object ID %d has the same name as that of another index on the same table.
3810 10 No Event notification "%.*ls" on assembly is dropped.
3811 10 No Event notification "%.*ls" on service queue is dropped as broker instance is not specified.
3812 10 No Event notification "%.*ls" on object is dropped.
3813 16 No Upgrade of login '%.*ls' failed because its name or sid is a duplicate of another login or server role.
3814 16 No Local login mapped to remote login '%.*ls' on server '%.*ls' is invalid. Drop and recreate the remote login before upgrade.
3815 16 No Local login mapped to linked login '%.*ls' on server '%.*ls' is invalid. Drop and recreate the linked login before upgrade.
3816 16 No Upgrade of login '%.*ls' failed because its password hash is invalid. Update the login password before upgrade.
3817 10 No Warning: The index "%.*ls" on "%.*ls"."%.*ls" was disabled because the implementation of "%.*ls" have changed.
3819 10 No Warning: The check constraint "%.*ls" on "%.*ls"."%.*ls" was disabled and set as not trusted because the implementation of "%.*ls" have changed.
3821 10 No Warning: The foreign key constraint "%.*ls" on "%.*ls"."%.*ls" was disabled because the implementation of '%.*ls' have changed.
3822 10 No Warning: The heap "%.*ls"."%.*ls" has persisted computed columns that depends on a geometry or geography methods and may contain out-of-date information. Because of this, DBCC may report inconsistencies on this table. The persisted computed columns depending on geometry or geography methods should be unpersisted and persisted again to refresh the data.
3823 10 No Warning: The object "%.*ls"."%.*ls" could not be bound and was ignored during upgrade. Consider reviewing and correcting its definition.
3827 10 No Warning: The table "%.*ls"."%.*ls" is unavailable because it contains a persisted computed column that depends on "%.*ls", the implementation of which has changed. Rebuild the table offline and reconstruct the persisted computed column.
3830 10 No Metadata cache coherency check for database ID(%d) did not find any inconsistency.
3851 10 No An invalid row (%ls) was found in the system table sys.%ls%ls.
3852 10 No Row (%ls) in sys.%ls%ls does not have a matching row (%ls) in sys.%ls%ls.
3853 10 No Attribute (%ls) of row (%ls) in sys.%ls%ls does not have a matching row (%ls) in sys.%ls%ls.
3854 10 No Attribute (%ls) of row (%ls) in sys.%ls%ls has a matching row (%ls) in sys.%ls%ls that is invalid.
3855 10 No Attribute (%ls) exists without a row (%ls) in sys.%ls%ls.
3856 10 No Attribute (%ls) exists but should not for row (%ls) in sys.%ls%ls.
3857 10 No The attribute (%ls) is required but is missing for row (%ls) in sys.%ls%ls.
3858 10 No The attribute (%ls) of row (%ls) in sys.%ls%ls has an invalid value.
3859 10 No Warning: The system catalog was updated directly in database ID %d, most recently at %S_DATE.
3860 10 No Cannot upgrade database ID 32767. This ID value is reserved for SQL Server internal use.
3862 10 No CLR type '%.*ls'.'%.*ls' is disabled because the on disk format for this CLR type has been changed. Use DROP TYPE to remove this disabled type.
3864 23 Yes Could not find an entry for index with ID %d on object with ID %d in database with ID %d. Possible schema corruption. Run DBCC CHECKDB.
3865 16 No The operation on object '%.*ls' is blocked. The object is a FileTable system defined object and user modifications are not allowed.
3866 10 Yes The operation on FileTable system defined object '%.*ls' was allowed because of traceflag settings. To prevent this informational message from appearing in the error log, use DBCC TRACEOFF to turn off the trace flag.
3867 10 No The FileTable object '%.*ls' contains system defined constraints that cannot be modified as long as the FILETABLE_NAMESPACE option is enabled on the table. Only user defined constraints have been updated.
3868 10 No Failed to start tempdb metadata memory-optimized mode. Continuing tempdb startup in SQL mode. Please run ALTER SERVER CONFIGURATION TEMPDB METADATA MEMORY_OPTIMIZED ON once again and restart to retry.
3869 10 No The desired memory-optimized configuration is already set. No further action is necessary.
3870 10 No The tempdb metadata memory-optimized configuration has been set to '%S_MSG'. Restart SQL server for the new setting to take effect.
3871 10 No Tempdb started with memory-optimized metadata.
3872 10 No The hybrid buffer pool memory-optimized configuration has been set to '%S_MSG'. Restart SQL server for the new setting to take effect.
3873 10 No Hybrid buffer pool started with memory-optimized metadata.
3874 16 No Resource pool '%.*ls' does not exist or resource governor has not been reconfigured.
3875 16 No Internal resource pool cannot be used for tempdb
3876 16 No Resource pool setting for tempdb failed. Retry with a valid pool.
3901 16 No The transaction name must be specified when it is used with the mark option.
3902 16 No The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.
3903 16 No The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION.
3904 21 No Cannot unsplit logical page %S_PGID in object '%.*ls', in database '%.*ls'. Both pages together contain more data than will fit on one page.
3905 16 No The number of nested transactions has reached the maximum allowed value of 4294967296.
3906 16 No Failed to update database "%.*ls" because the database is read-only.
3907 16 No Transaction aborted when accessing versioned row in table '%.*ls' in database '%.*ls'. Requested versioned row was not found in persistent version store. Your database is probably out of space. Please refer to BOL on how to configure database size.
3908 16 No Could not run BEGIN TRANSACTION in database '%.*ls' because the database is in emergency mode or is damaged and must be restarted.
3909 16 No Session binding token is invalid.
3910 16 No Transaction context in use by another session.
3911 16 Yes Persistent version store is full. New version(s) could not be added. A transaction that needs to access the version store may be rolled back. Please refer to BOL on how to increase database max size.
3912 16 No Cannot bind using an XP token while the server is not in an XP call.
3913 16 Yes TDS reset connection protocol error. Client driver requested both ResetConnectionKeepLocalXact and ResetConnectionKeepDTCXact at the same time. This is not expected in server.
3914 16 No The data type "%s" is invalid for transaction names or savepoint names. Allowed data types are char, varchar, nchar, varchar(max), nvarchar, and nvarchar(max).
3915 16 No Cannot use the ROLLBACK statement within an INSERT-EXEC statement.
3916 16 No Cannot use the COMMIT statement within an INSERT-EXEC statement unless BEGIN TRANSACTION is used first.
3917 16 No Session is bound to a transaction context that is in use. Other statements in the batch were ignored.
3918 16 No The statement or function must be executed in the context of a user transaction.
3919 16 No Cannot enlist in the transaction because the transaction has already been committed or rolled back.
3920 10 No The WITH MARK option only applies to the first BEGIN TRAN WITH MARK statement. The option is ignored.
3921 16 No Cannot get a transaction token if there is no transaction active. Reissue the statement after a transaction has been started
3922 16 No Cannot enlist in the transaction because the transaction does not exist.
3923 10 No Cannot use transaction marks on database '%.*ls' with bulk-logged operations that have not been backed up. The mark is ignored.
3924 10 No The session was enlisted in an active user transaction while trying to bind to a new transaction. The session has defected from the previous user transaction.
3925 16 No Invalid transaction mark name. The 'LSN:' prefix is reserved.
3926 10 No The transaction active in this session has been committed or aborted by another session.
3927 10 No The session had an active transaction when it tried to enlist in a Distributed Transaction Coordinator transaction.
3928 16 No The marked transaction "%.*ls" failed. A timeout occurred while attempting to place a mark in the log by committing the marked transaction. This can be caused by contention with Microsoft Distributed Transaction Coordinator (MS DTC) transactions or other local marked transaction that have prepared, but not committed or aborted. Try the operation again and if the error persists, determine the source of the contention.
3929 16 No No distributed or bound transaction is allowed in single user database.
3930 16 No The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.
3931 16 No The current transaction cannot be committed and cannot be rolled back to a savepoint. Roll back the entire transaction.
3932 16 No The save point name "%.*ls" that was provided is too long. The maximum allowed length is %d characters.
3933 16 No Cannot promote the transaction to a distributed transaction because there is an active save point in this transaction.
3934 14 No The current user cannot use this FILESTREAM transaction context. To obtain a valid FILESTREAM transaction context, use GET_FILESTREAM_TRANSACTION_CONTEXT.
3935 16 No A FILESTREAM transaction context could not be initialized. This might be caused by a resource shortage. Retry the operation. Error code: 0x%x.
3936 16 No The transaction could not be committed because an error occurred while trying to flush FILESTREAM data to disk. A file may have been open at commit time or a disk I/O error may have occurred. '%.*ls' was one of the one or more files involved. ErrorCode: 0x%x.
3937 16 No While rolling back a transaction, an error occurred while trying to deliver a rollback notification to the FILESTREAM filter driver. Error code: 0x%0x.
3938 18 No The transaction has been stopped because it conflicted with the execution of a FILESTREAM close operation using the same transaction. The transaction will be rolled back.
3939 16 No An uncommittable transaction was detected at the beginning of the batch. The transaction was rolled back. This was caused by an error that occurred during the processing of a FILESTREAM request in the context of this transaction.
3940 16 No Failed to acquire necessary locks during commit and the transaction was rolled back.
3941 16 No The transaction cannot modify an object that is published for replication or has Change Data Capture enabled because the transaction started before replication or Change Data Capture was enabled on the database. Retry the transaction.
3947 10 No The transaction was aborted because the secondary compute failed to catch up redo. Retry the transaction.
3948 16 No The transaction was terminated because of the availability replica config/state change or because ghost records are being deleted on the primary and the secondary availability replica that might be needed by queries running under snapshot isolation. Retry the transaction.
3949 16 No Transaction aborted when accessing versioned row in table '%.*ls' in database '%.*ls'. Requested versioned row was not found because the readable secondary access is not allowed for the operation that attempted to create the version. This might be timing related, so try the query again later.
3950 16 No Version store scan timed out when attempting to read the next row. Please try the statement again later when the system is not as busy.
3951 16 No Transaction failed in database '%.*ls' because the statement was run under snapshot isolation but the transaction did not start in snapshot isolation. You cannot change the isolation level of the transaction to snapshot after the transaction has started unless the transaction was originally started under snapshot isolation level.
3952 16 No Snapshot isolation transaction failed accessing database '%.*ls' because snapshot isolation is not allowed in this database. Use ALTER DATABASE to allow snapshot isolation.
3953 16 No Snapshot isolation transaction failed in database '%.*ls' because the database was not recovered when the current transaction was started. Retry the transaction after the database has recovered.
3954 16 No Snapshot isolation transaction failed to start in database '%.*ls' because the ALTER DATABASE command that disallows snapshot isolation had started before this transaction began. The database is in transition to OFF state. You will either need to change the isolation level of the transaction or re-enable the snapshot isolation in the database.
3955 16 No Snapshot isolation transaction failed in database '%.*ls' because the recovery was skipped for this database. You must recover the database before you can run a transaction under snapshot isolation.
3956 16 No Snapshot isolation transaction failed to start in database '%.*ls' because the ALTER DATABASE command which enables snapshot isolation for this database has not finished yet. The database is in transition to pending ON state. You must wait until the ALTER DATABASE Command completes successfully.
3957 16 No Snapshot isolation transaction failed in database '%.*ls' because the database did not allow snapshot isolation when the current transaction started. It may help to retry the transaction.
3958 16 No Transaction aborted when accessing versioned row in table '%.*ls' in database '%.*ls'. Requested versioned row was not found. Your tempdb is probably out of space. Please refer to BOL on how to configure tempdb for versioning.
3959 10 Yes Version store is full. New version(s) could not be added. A transaction that needs to access the version store may be rolled back. Please refer to BOL on how to configure tempdb for versioning.
3960 16 No Snapshot isolation transaction aborted due to update conflict. You cannot use snapshot isolation to access table '%.*ls' directly or indirectly in database '%.*ls' to update, delete, or insert the row that has been modified or deleted by another transaction. Retry the transaction or change the isolation level for the update/delete statement.
3961 16 No Snapshot isolation transaction failed in database '%.*ls' because the object accessed by the statement has been modified by a DDL statement in another concurrent transaction since the start of this transaction. It is disallowed because the metadata is not versioned. A concurrent update to metadata can lead to inconsistency if mixed with snapshot isolation.
3962 16 No Bind to another transaction while executing SQL Server internal query is not supported. Check your logon trigger definition and remove any sp_bindsession usage if any. If this error is not happening during logon trigger execution, contact production support team.
3963 16 No Transaction failed in database '%.*ls' because distributed transactions are not supported under snapshot isolation.
3964 16 No Transaction failed because this DDL statement is not allowed inside a snapshot isolation transaction. Since metadata is not versioned, a metadata change can lead to inconsistency if mixed within snapshot isolation.
3965 16 No The PROMOTE TRANSACTION request failed because there is no local transaction active.
3966 17 No Transaction is rolled back when accessing version store. It was earlier marked as victim when the version store was shrunk due to insufficient space in tempdb. This transaction was marked as a victim earlier because it may need the row version(s) that have already been removed to make space in tempdb. Retry the transaction
3967 17 Yes Insufficient space in tempdb to hold row versions. Need to shrink the version store to free up some space in tempdb. Transaction (id=%I64d xsn=%I64d spid=%d elapsed_time=%d) has been marked as victim and it will be rolled back if it accesses the version store. If the problem persists, the likely cause is improperly sized tempdb or long running transactions. Please refer to BOL on how to configure tempdb for versioning.
3968 10 No Snapshot isolation or read committed snapshot is not available in database '%.*ls' because SQL Server was started with one or more undocumented trace flags that prevent enabling database for versioning. Transaction started with snapshot isolation will fail and a query running under read committed snapshot will succeed but will resort back to lock based read committed.
3969 16 No Distributed transaction is not supported while running SQL Server internal query. Check your logon trigger definition and remove any distributed transaction usage if any. If this error is not happening during logon trigger execution, contact production support team.
3970 16 No This operation conflicts with another pending operation on this transaction. The operation failed.
3971 16 No The server failed to resume the transaction. Desc:%I64x.
3972 20 Yes Incoming Tabular Data Stream (TDS) protocol is incorrect. Transaction Manager event has wrong length. Event type: %d. Expected length: %d. Actual length: %d.
3973 16 No The database is currently being used by another thread under the same workspace in exclusive mode. The operation failed.
3974 16 No The number of databases in exclusive mode usage under a workspace is limited. Because the limit has been exceeded, the operation failed.
3975 16 No The varchar(max) data type is not supported for sp_getbindtoken. The batch has been aborted.
3976 16 No The transaction name has the odd length %d. The batch has been aborted.
3977 16 No The savepoint name cannot be NULL. The batch has been aborted.
3978 16 No Beginning a new transaction after rollback to save point is not allowed.
3979 16 No The TM request is longer than expected. The request is not processed.
3980 16 No The request failed to run because the batch is aborted, this can be caused by abort signal sent from client, or another request is running in the same session, which makes the session busy.
3981 16 No The transaction operation cannot be performed because there are pending requests working on this transaction.
3982 16 No New transaction is not allowed to be started while DTC or bound transaction is active.
3983 16 No The operation failed because the session is not single threaded.
3984 16 No Cannot acquire a database lock during a transaction change.
3985 16 No An error occurred during the changing of transaction context. This is usually caused by low memory in the system. Try to free up more memory.
3986 19 No The transaction timestamps ran out. Restart the server.
3987 10 No SNAPSHOT ISOLATION is always enabled in this database.
3988 16 No New transaction is not allowed because there are other threads running in the session.
3989 16 No New request is not allowed to start because it should come with valid transaction descriptor.
3990 16 No Transaction is not allowed to commit inside of a user defined routine, trigger or aggregate because the transaction is not started in that CLR level. Change application logic to enforce strict transaction nesting.
3991 16 No The context transaction which was active before entering user defined routine, trigger or aggregate "%.*ls" has been ended inside of it, which is not allowed. Change application logic to enforce strict transaction nesting.
3992 16 No Transaction count has been changed from %d to %d inside of user defined routine, trigger or aggregate "%.*ls". This is not allowed and user transaction will be rolled back. Change application logic to enforce strict transaction nesting.
3993 16 No The user transaction that has been started in user defined routine, trigger or aggregate "%.*ls" is not ended upon exiting from it. This is not allowed and the transaction will be rolled back. Change application logic to enforce strict transaction nesting.
3994 16 No User defined routine, trigger or aggregate tried to rollback a transaction that is not started in that CLR level. An exception will be thrown to prevent execution of rest of the user defined routine, trigger or aggregate.
3995 16 No Unknown transaction isolation level %d, valid value range is 0 to 5.
3996 16 No Snapshot isolation level is not supported for distributed transaction. Use another isolation level or do not use distributed transaction.
3997 16 No A transaction that was started in a MARS batch is still active at the end of the batch. The transaction is rolled back.
3998 16 No Uncommittable transaction is detected at the end of the batch. The transaction is rolled back.
3999 17 Yes Failed to flush the commit table to disk in dbid %d due to error %d. Check the errorlog for more information.