ScrollableControl.DockPaddingEdges.Right Propriedade

public:
 property int Right { int get(); void set(int value); };

public int Right { get; set; }

member this.Right : int with get, set

Public Property Right As Integer

Valor da propriedade

A largura do preenchimento, em pixels.

Exemplos

O exemplo de código a seguir usa a classe derivada , Panel. O exemplo encaixa um botão em um controle de painel e percorre as ScrollableControl.DockPaddingEdges propriedades, definindo cada um individualmente no clique do botão. Esse código exige que um Panel controle e um Button tenham sido instanciados em um formulário e uma variável de membro no nível de classe chamada myCounter tenha sido declarada como um inteiro com sinal de 32 bits. Esse código deve ser chamado no Click evento do botão.

void SetDockPadding()
{
   // Dock the button in the panel.
   button1->Dock = System::Windows::Forms::DockStyle::Fill;

   // Reset the counter if it is greater than 5.
   if ( myCounter > 5 )
   {
      myCounter = 0;
   }


   /* Set the appropriate DockPadding and display
          which one was set on the button face. */
   switch ( myCounter )
   {
      case 0:
         panel1->DockPadding->All = 0;
         button1->Text = "Start";
         break;

      case 1:
         panel1->DockPadding->Top = 10;
         button1->Text = "Top";
         break;

      case 2:
         panel1->DockPadding->Bottom = 10;
         button1->Text = "Bottom";
         break;

      case 3:
         panel1->DockPadding->Left = 10;
         button1->Text = "Left";
         break;

      case 4:
         panel1->DockPadding->Right = 10;
         button1->Text = "Right";
         break;

      case 5:
         panel1->DockPadding->All = 20;
         button1->Text = "All";
         break;
   }
   myCounter++;
}

private void SetDockPadding()
 {
    // Dock the button in the panel.
    button1.Dock = System.Windows.Forms.DockStyle.Fill;
    
    // Reset the counter if it is greater than 5.
    if (myCounter > 5)
    {
       myCounter = 0;
    }
 
    /* Set the appropriate DockPadding and display
       which one was set on the button face. */
    switch (myCounter)
    {
       case 0:
          panel1.DockPadding.All = 0;
          button1.Text = "Start";
          break;
       case 1:
          panel1.DockPadding.Top = 10;
          button1.Text = "Top";
          break;
       case 2:
          panel1.DockPadding.Bottom = 10;
          button1.Text = "Bottom";
          break;
       case 3:
          panel1.DockPadding.Left = 10;
          button1.Text = "Left";
          break;
       case 4:
          panel1.DockPadding.Right = 10;
          button1.Text = "Right";
          break;
       case 5:
          panel1.DockPadding.All = 20;
          button1.Text = "All";
          break;
    }
    
    // Increment the counter.
    myCounter += 1;
 }

Private Sub SetDockPadding()
    ' Dock the button in the panel.
    button1.Dock = System.Windows.Forms.DockStyle.Fill
    
    ' Reset the counter if it is greater than 5.
    If myCounter > 5 Then
        myCounter = 0
    End If
    
    ' Set the appropriate DockPadding and display
    ' which one was set on the button face. 
    Select Case myCounter
        Case 0
            panel1.DockPadding.All = 0
            button1.Text = "Start"
        Case 1
            panel1.DockPadding.Top = 10
            button1.Text = "Top"
        Case 2
            panel1.DockPadding.Bottom = 10
            button1.Text = "Bottom"
        Case 3
            panel1.DockPadding.Left = 10
            button1.Text = "Left"
        Case 4
            panel1.DockPadding.Right = 10
            button1.Text = "Right"
        Case 5
            panel1.DockPadding.All = 20
            button1.Text = "All"
    End Select
    
    ' Increment the counter.
    myCounter += 1
End Sub

Comentários

A largura de preenchimento atribuída a essa propriedade é aplicada somente à borda direita do controle encaixado.

Aplica-se a

Confira também

• All
• Bottom
• Top
• Left