EventLog Конструкторы

Исходный код:

EventLog.cs

Исходный код:

EventLog.cs

Исходный код:

EventLog.cs

public:
 EventLog();

public EventLog ();

Public Sub New ()

Примеры

В следующем примере создается источник MySource , если он еще не существует, и записывается запись в журнал MyNewLogсобытий .

#using <System.dll>

using namespace System;
using namespace System::Diagnostics;
using namespace System::Threading;
int main()
{
   
   // Create the source, if it does not already exist.
   if (  !EventLog::SourceExists( "MySource" ) )
   {
      //An event log source should not be created and immediately used.
      //There is a latency time to enable the source, it should be created
      //prior to executing the application that uses the source.
      //Execute this sample a second time to use the new source.
      EventLog::CreateEventSource( "MySource", "MyNewLog" );
      Console::WriteLine( "CreatingEventSource" );
      // The source is created.  Exit the application to allow it to be registered.
      return 0;
   }

   
   // Create an EventLog instance and assign its source.
   EventLog^ myLog = gcnew EventLog;
   myLog->Source = "MySource";
   
   // Write an informational entry to the event log.    
   myLog->WriteEntry( "Writing to event log." );
}

using System;
using System.Diagnostics;
using System.Threading;

class MySample{

    public static void Main(){

        // Create the source, if it does not already exist.
        if(!EventLog.SourceExists("MySource"))
        {
             //An event log source should not be created and immediately used.
             //There is a latency time to enable the source, it should be created
             //prior to executing the application that uses the source.
             //Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog");
            Console.WriteLine("CreatedEventSource");
            Console.WriteLine("Exiting, execute the application a second time to use the source.");
            // The source is created.  Exit the application to allow it to be registered.
            return;
        }

        // Create an EventLog instance and assign its source.
        EventLog myLog = new EventLog();
        myLog.Source = "MySource";

        // Write an informational entry to the event log.
        myLog.WriteEntry("Writing to event log.");
    }
}

Option Explicit
Option Strict

Imports System.Diagnostics
Imports System.Threading

Class MySample
    Public Shared Sub Main()
        
        If Not EventLog.SourceExists("MySource") Then
            ' Create the source, if it does not already exist.
            ' An event log source should not be created and immediately used.
            ' There is a latency time to enable the source, it should be created
            ' prior to executing the application that uses the source.
            ' Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog")
            Console.WriteLine("CreatingEventSource")
            'The source is created.  Exit the application to allow it to be registered.
            Return
        End If
        
        ' Create an EventLog instance and assign its source.
        Dim myLog As New EventLog()
        myLog.Source = "MySource"
        
        ' Write an informational entry to the event log.    
        myLog.WriteEntry("Writing to event log.")
    End Sub
End Class

Комментарии

Перед вызовом WriteEntrySource укажите свойство экземпляра EventLog . Если вы только считываете Entries данные из журнала, можно также указать только Log свойства и MachineName .

В следующей таблице показаны начальные значения свойств для экземпляра EventLog.

См. также раздел

• Source
• Log
• MachineName
• Entries
• WriteEntry
• WriteEvent
• EventLogEntry

Исходный код:

EventLog.cs

Исходный код:

EventLog.cs

Исходный код:

EventLog.cs

public:
 EventLog(System::String ^ logName);

public EventLog (string logName);

new System.Diagnostics.EventLog : string -> System.Diagnostics.EventLog

Public Sub New (logName As String)

Параметры

Исключения

Примеры

В следующем примере считываются записи в журнале событий myNewLog на локальном компьютере.

#using <System.dll>

using namespace System;
using namespace System::Diagnostics;
using namespace System::Threading;
int main()
{
    // Create the source, if it does not already exist.
   if (  !EventLog::SourceExists( "MySource" ) )
   {
      //An event log source should not be created and immediately used.
      //There is a latency time to enable the source, it should be created
      //prior to executing the application that uses the source.
      //Execute this sample a second time to use the new source.
      EventLog::CreateEventSource( "MySource", "MyNewLog" );
      Console::WriteLine( "CreatingEventSource" );
      // The source is created.  Exit the application to allow it to be registered.
      return 0;
   }

   
   // Create an EventLog instance and assign its log name.
   EventLog^ myLog = gcnew EventLog( "myNewLog" );
   
   // Read the event log entries.
   System::Collections::IEnumerator^ myEnum = myLog->Entries->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      EventLogEntry^ entry = safe_cast<EventLogEntry^>(myEnum->Current);
      Console::WriteLine( "\tEntry: {0}", entry->Message );
   }
}

using System;
using System.Diagnostics;
using System.Threading;

class MySample
{
    public static void Main()
    {
        // Create the source, if it does not already exist.
        if (!EventLog.SourceExists("MySource"))
        {
            //An event log source should not be created and immediately used.
            //There is a latency time to enable the source, it should be created
            //prior to executing the application that uses the source.
            //Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog");
            Console.WriteLine("CreatedEventSource");
            Console.WriteLine("Exiting, execute the application a second time to use the source.");
            // The source is created.  Exit the application to allow it to be registered.
            return;
        }

        // Create an EventLog instance and assign its log name.
        EventLog myLog = new EventLog("myNewLog");

        // Read the event log entries.
        foreach (EventLogEntry entry in myLog.Entries)
        {
            Console.WriteLine("\tEntry: " + entry.Message);
        }
    }
}

Option Explicit
Option Strict

Imports System.Diagnostics
Imports System.Threading

Class MySample
    Public Shared Sub Main()
        
        If Not EventLog.SourceExists("MySource") Then
            ' Create the source, if it does not already exist.
            ' An event log source should not be created and immediately used.
            ' There is a latency time to enable the source, it should be created
            ' prior to executing the application that uses the source.
            ' Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog")
            Console.WriteLine("CreatingEventSource")
            'The source is created.  Exit the application to allow it to be registered.
            Return
        End If

        Dim myLog As New EventLog("myNewLog")
        
        ' Read the event log entries.
        Dim entry As EventLogEntry
        For Each entry In  myLog.Entries
            Console.WriteLine((ControlChars.Tab & "Entry: " & entry.Message))
        Next entry
    End Sub
End Class

Комментарии

Эта перегрузка Log задает для свойства logName значение параметра . Перед вызовом WriteEntrySource укажите свойство экземпляра EventLog . Если вы только считываете Entries данные из журнала, можно также указать только Log свойства и MachineName .

Если источник, указанный в свойстве Source , уникален из других источников на компьютере, последующий вызов WriteEntry создает журнал с указанным именем, если он еще не существует.

В следующей таблице показаны начальные значения свойств для экземпляра EventLog.

См. также раздел

• Source
• Log
• MachineName
• Entries
• WriteEntry
• WriteEvent
• EventLogEntry

Исходный код:

EventLog.cs

Исходный код:

EventLog.cs

Исходный код:

EventLog.cs

public:
 EventLog(System::String ^ logName, System::String ^ machineName);

public EventLog (string logName, string machineName);

new System.Diagnostics.EventLog : string * string -> System.Diagnostics.EventLog

Public Sub New (logName As String, machineName As String)

Параметры

Исключения

Примеры

В следующем примере считываются записи в журнале событий myNewLog на компьютере myServer.

#using <System.dll>

using namespace System;
using namespace System::Diagnostics;
using namespace System::Threading;
int main()
{
   // Create the source, if it does not already exist.
   if (  !EventLog::SourceExists( "MySource" ) )
   {
      //An event log source should not be created and immediately used.
      //There is a latency time to enable the source, it should be created
      //prior to executing the application that uses the source.
      //Execute this sample a second time to use the new source.
      EventLog::CreateEventSource( "MySource", "MyNewLog", "myServer" );
      Console::WriteLine( "CreatingEventSource" );
      // The source is created.  Exit the application to allow it to be registered.
      return 0;
   }

   // Create an EventLog instance and assign its log name.
   EventLog^ myLog = gcnew EventLog( "myNewLog","myServer" );
   
   // Read the event log entries.
   System::Collections::IEnumerator^ myEnum = myLog->Entries->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      EventLogEntry^ entry = safe_cast<EventLogEntry^>(myEnum->Current);
      Console::WriteLine( "\tEntry: {0}", entry->Message );
   }
}

using System;
using System.Diagnostics;
using System.Threading;

class MySample1
{
    public static void Main()
    {
        // Create the source, if it does not already exist.
        if (!EventLog.SourceExists("MySource"))
        {
            //An event log source should not be created and immediately used.
            //There is a latency time to enable the source, it should be created
            //prior to executing the application that uses the source.
            //Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog", "myServer");
            Console.WriteLine("CreatedEventSource");
            Console.WriteLine("Exiting, execute the application a second time to use the source.");
            // The source is created.  Exit the application to allow it to be registered.
            return;
        }
        // Create an EventLog instance and assign its log name.
        EventLog myLog = new EventLog("myNewLog", "myServer");

        // Read the event log entries.
        foreach (EventLogEntry entry in myLog.Entries)
        {
            Console.WriteLine("\tEntry: " + entry.Message);
        }
    }
}

Option Explicit
Option Strict

Imports System.Diagnostics
Imports System.Threading

Class MySample
    Public Shared Sub Main()
        If Not EventLog.SourceExists("MySource") Then
            ' Create the source, if it does not already exist.
            ' An event log source should not be created and immediately used.
            ' There is a latency time to enable the source, it should be created
            ' prior to executing the application that uses the source.
            ' Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog", "myServer")
            Console.WriteLine("CreatingEventSource")
            'The source is created.  Exit the application to allow it to be registered.
            Return
        End If

        ' Create an EventLog instance and assign its log name.
        Dim myLog As New EventLog("myNewLog", "myServer")
        
        ' Read the event log entries.
        Dim entry As EventLogEntry
        For Each entry In  myLog.Entries
            Console.WriteLine((ControlChars.Tab & "Entry: " & entry.Message))
        Next entry
    End Sub
End Class

Комментарии

Эта перегрузка Log задает для свойства значение параметра , logName а для MachineName свойства — machineName параметр . Перед вызовом WriteEntrySource укажите свойство EventLogобъекта . Если вы только считываете Entries данные из журнала, можно также указать только Log свойства и MachineName .

В следующей таблице показаны начальные значения свойств для экземпляра EventLog.

См. также раздел

• Source
• Log
• MachineName
• Entries
• WriteEntry
• WriteEvent
• EventLogEntry

Исходный код:

EventLog.cs

Исходный код:

EventLog.cs

Исходный код:

EventLog.cs

public:
 EventLog(System::String ^ logName, System::String ^ machineName, System::String ^ source);

public EventLog (string logName, string machineName, string source);

new System.Diagnostics.EventLog : string * string * string -> System.Diagnostics.EventLog

Public Sub New (logName As String, machineName As String, source As String)

Параметры

Исключения

Примеры

В следующем примере запись записывается в журнал событий MyNewLog на локальном компьютере с использованием источника MySource.

#using <System.dll>

using namespace System;
using namespace System::Diagnostics;
using namespace System::Threading;
int main()
{
   // Create the source, if it does not already exist.
   if (  !EventLog::SourceExists( "MySource" ) )
   {
      //An event log source should not be created and immediately used.
      //There is a latency time to enable the source, it should be created
      //prior to executing the application that uses the source.
      //Execute this sample a second time to use the new source.
      EventLog::CreateEventSource( "MySource", "MyNewLog");
      Console::WriteLine( "CreatingEventSource" );
      // The source is created.  Exit the application to allow it to be registered.
      return 0;
   }
   
   // Create an EventLog instance and assign its source.
   EventLog^ myLog = gcnew EventLog( "myNewLog",".","MySource" );
   
   // Write an entry to the log.        
   myLog->WriteEntry( String::Format( "Writing to event log on {0}", myLog->MachineName ) );
}

using System;
using System.Diagnostics;
using System.Threading;

class MySample2
{
    public static void Main()
    {
        // Create the source, if it does not already exist.
        if (!EventLog.SourceExists("MySource"))
        {
            //An event log source should not be created and immediately used.
            //There is a latency time to enable the source, it should be created
            //prior to executing the application that uses the source.
            //Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog");
            Console.WriteLine("CreatedEventSource");
            Console.WriteLine("Exiting, execute the application a second time to use the source.");
            // The source is created.  Exit the application to allow it to be registered.
            return;
        }
        // Create an EventLog instance and assign its source.
        EventLog myLog = new EventLog("myNewLog", ".", "MySource");

        // Write an entry to the log.
        myLog.WriteEntry("Writing to event log on " + myLog.MachineName);
    }
}

Option Strict
Option Explicit

Imports System.Diagnostics
Imports System.Threading

Class MySample
    Public Shared Sub Main()
        If Not EventLog.SourceExists("MySource") Then
            ' Create the source, if it does not already exist.
            ' An event log source should not be created and immediately used.
            ' There is a latency time to enable the source, it should be created
            ' prior to executing the application that uses the source.
            ' Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog")
            Console.WriteLine("CreatingEventSource")
            'The source is created.  Exit the application to allow it to be registered.
            Return
        End If
        ' Create an EventLog instance and assign its source.
        Dim myLog As New EventLog("myNewLog", ".", "MySource")
        
        ' Write an entry to the log.        
        myLog.WriteEntry(("Writing to event log on " & myLog.MachineName))
    End Sub
End Class

Комментарии

Этот конструктор задает для свойства logName значение параметра , для MachineName свойства — machineName параметр , а для Source свойства — параметр source .Log Свойство Source является обязательным при записи в журнал событий. Однако если вы считываете только данные из журнала событий, требуются только Log свойства и MachineName (если с журналом событий на сервере уже связан источник). Если вы только считываете данные из журнала событий, может быть достаточно другой перегрузки конструктора.

В следующей таблице показаны начальные значения свойств для экземпляра EventLog.

См. также раздел

• Source
• Log
• MachineName
• Entries
• WriteEntry
• WriteEvent
• EventLogEntry