ServiceBehaviorAttribute.TransactionIsolationLevel Свойство

public:
 property System::Transactions::IsolationLevel TransactionIsolationLevel { System::Transactions::IsolationLevel get(); void set(System::Transactions::IsolationLevel value); };

public System.Transactions.IsolationLevel TransactionIsolationLevel { get; set; }

member this.TransactionIsolationLevel : System.Transactions.IsolationLevel with get, set

Public Property TransactionIsolationLevel As IsolationLevel

Значение свойства

Значение IsolationLevel, задающее уровень изоляции транзакции. Значение по умолчанию — Unspecified.

Исключения

Примеры

В следующем примере кода уровень изоляции транзакции задается как ReadCommitted, не поддерживаются параллельные транзакции, требуется потоковая транзакция из вызова метода и автоматически фиксируется транзакция в случае отсутствия необработанных исключений.

using System;
using System.ServiceModel;
using System.Transactions;

namespace Microsoft.WCF.Documentation
{
  [ServiceContract(
    Namespace="http://microsoft.wcf.documentation",
    SessionMode=SessionMode.Required)]
  public interface IBehaviorService
  {
    [OperationContract]
    string TxWork(string message);
  }

  // Note: To use the TransactionIsolationLevel property, you
  // must add a reference to the System.Transactions.dll assembly.
  /* The following service implementation:
   *   -- Processes messages on one thread at a time
   *   -- Creates one service object per session
   *   -- Does not release the service object when the transaction commits
   *   -- The isolation level is read committed.
   */
  [ServiceBehavior(
    ConcurrencyMode=ConcurrencyMode.Single,
    InstanceContextMode=InstanceContextMode.PerSession,
    ReleaseServiceInstanceOnTransactionComplete=false,
    TransactionIsolationLevel=System.Transactions.IsolationLevel.ReadCommitted
  )]
  public class BehaviorService : IBehaviorService, IDisposable
  {
    Guid myID;

    public BehaviorService()
    {
      myID = Guid.NewGuid();
      Console.WriteLine(
        "Object "
        + myID.ToString()
        + " created.");
    }

    /*
     * The following operation-level behaviors are specified:
     *   -- Always executes under a transaction scope.
     *   -- The transaction scope is completed when the operation terminates
     *       without an unhandled exception.
     */
    [OperationBehavior(
      TransactionAutoComplete = true,
      TransactionScopeRequired = true
    )]
    [TransactionFlow(TransactionFlowOption.Mandatory)]
    public string TxWork(string message)
    {
      // Do some transactable work.
      Console.WriteLine("TxWork called with: " + message);
      // Display transaction information.

      TransactionInformation info = Transaction.Current.TransactionInformation;
      Console.WriteLine("The distributed tx ID: {0}.", info.DistributedIdentifier);
      Console.WriteLine("The tx status: {0}.", info.Status);
      return string.Format("Hello. This was object {0}.",myID.ToString()) ;
    }

    public void Dispose()
    {
      Console.WriteLine(
        "Service "
        + myID.ToString()
        + " is being recycled."
      );
    }
  }
}

Imports System.ServiceModel
Imports System.Transactions

Namespace Microsoft.WCF.Documentation
  <ServiceContract(Namespace:="http://microsoft.wcf.documentation", SessionMode:=SessionMode.Required)> _
  Public Interface IBehaviorService
    <OperationContract> _
    Function TxWork(ByVal message As String) As String
  End Interface

  ' Note: To use the TransactionIsolationLevel property, you 
  ' must add a reference to the System.Transactions.dll assembly.
'   The following service implementation:
'   *   -- Processes messages on one thread at a time
'   *   -- Creates one service object per session
'   *   -- Does not release the service object when the transaction commits
'   *   -- The isolation level is read committed.
'   
    <ServiceBehavior(ConcurrencyMode:=ConcurrencyMode.Single, InstanceContextMode:=InstanceContextMode.PerSession, _
      ReleaseServiceInstanceOnTransactionComplete:=False, TransactionIsolationLevel:=System.Transactions.IsolationLevel.ReadCommitted)> _
    Public Class BehaviorService
        Implements IBehaviorService, IDisposable
        Private myID As Guid

        Public Sub New()
            myID = Guid.NewGuid()
            Console.WriteLine("Object " & myID.ToString() & " created.")
        End Sub

        '    
        '     * The following operation-level behaviors are specified:
        '     *   -- Always executes under a transaction scope.
        '     *   -- The transaction scope is completed when the operation terminates
        '     *       without an unhandled exception.
        '     
        <OperationBehavior(TransactionAutoComplete:=True, TransactionScopeRequired:=True), TransactionFlow(TransactionFlowOption.Mandatory)> _
        Public Function TxWork(ByVal message As String) As String Implements IBehaviorService.TxWork
            ' Do some transactable work.
            Console.WriteLine("TxWork called with: " & message)
            ' Display transaction information.

            Dim info As TransactionInformation = Transaction.Current.TransactionInformation
            Console.WriteLine("The distributed tx ID: {0}.", info.DistributedIdentifier)
            Console.WriteLine("The tx status: {0}.", info.Status)
            Return String.Format("Hello. This was object {0}.", myID.ToString())
        End Function

        Public Sub Dispose() Implements IDisposable.Dispose
            Console.WriteLine("Service " & myID.ToString() & " is being recycled.")
        End Sub
    End Class
End Namespace

Чтобы следующий пример кода выполнялся правильно, базовая привязка должна поддерживать поток транзакций. Для поддержки потока транзакций с использованием WSHttpBinding можно, например, задать для свойства TransactionFlow значение true в коде или в файле конфигурации приложения. В следующем примере кода показан файл конфигурации для предыдущего примера.

<configuration>
  <system.serviceModel>
    <services>
      <service  
        name="Microsoft.WCF.Documentation.BehaviorService" 
        behaviorConfiguration="mex"
        >
        <host>
          <baseAddresses>
            <add baseAddress="http://localhost:8080/BehaviorService"/>
            <add baseAddress="net.tcp://localhost:8081/BehaviorService"/>
          </baseAddresses>
        </host>
        <!--
          Note:
            This example code uses the WSHttpBinding to support transactions using the 
            WS-AtomicTransactions (WS-AT) protocol. WSHttpBinding is configured to use the  
            protocol, but the protocol is not enabled on some computers. Use the xws_reg -wsat+ 
            command to enable the WS-AtomicTransactions protocol in the MSDTC service.          
          -->
        <endpoint 
           contract="Microsoft.WCF.Documentation.IBehaviorService"
           binding="wsHttpBinding"
           bindingConfiguration="wsHttpBindingWithTXFlow"
           address="http://localhost:8080/BehaviorService"
          />
        <endpoint 
               contract="Microsoft.WCF.Documentation.IBehaviorService"
               binding="netTcpBinding"
               bindingConfiguration="netTcpBindingWithTXFlow"
               address="net.tcp://localhost:8081/BehaviorService"
          />
      </service>
    </services>
    <behaviors>
      <serviceBehaviors>
        <behavior name="mex">
          <serviceMetadata httpGetEnabled="true"/>
        </behavior>
      </serviceBehaviors>
    </behaviors>
    <!-- binding configuration - configures a WSHttpBinding to require transaction flow -->
    <bindings>
      <wsHttpBinding>
        <binding name="wsHttpBindingWithTXFlow" transactionFlow="true" />
      </wsHttpBinding>
      <netTcpBinding>
        <binding name="netTcpBindingWithTXFlow" transactionFlow="true" />
      </netTcpBinding>
    </bindings>

  </system.serviceModel>
</configuration>

Комментарии

Уровень изоляции, в котором выполняется транзакция, определяет способ обработки данных при внесении изменений в другие транзакции и длительность хранения блокировок в транзакции для защиты от этих изменений. Например, значение по умолчанию Unspecified определяет, что до завершения выполнения транзакции запрещены обновление и вставка.

Это свойство также можно использовать для ограничения уровня изоляции входящих транзакций, передаваемых от клиента.

Применяется к