Set-CsSipResponseCodeTranslationRule

Syntax

Set-CsSipResponseCodeTranslationRule
   [[-Identity] <XdsIdentity>]
   [-TranslatedResponseCode <Int32>]
   [-Priority <Int32>]
   [-ReceivedResponseCode <Int32>]
   [-Force]
   [-WhatIf]
   [-Confirm]
   [-ReceivedISUPCauseValue <Int32>]
   [<CommonParameters>]

Set-CsSipResponseCodeTranslationRule
   [-TranslatedResponseCode <Int32>]
   [-Priority <Int32>]
   [-ReceivedResponseCode <Int32>]
   [-Force]
   [-WhatIf]
   [-Confirm]
   [-Instance <PSObject>]
   [-ReceivedISUPCauseValue <Int32>]
   [<CommonParameters>]

Description

SIP trunking provides a way to connect a Voice over Internet Protocol (VoIP) network (such as Enterprise Voice) with the public switched telephone network (PSTN). In Skype for Business Server, the Mediation Server uses trunking peers to interact with the PSTN network. When an outgoing call fails on the PSTN network, an ISDN User Part (ISUP) cause code is automatically generated. For example, a PSTN gateway might send cause code 34 to indicate that no circuit or channel was available for completing the call. When a Mediation Server trunking peer receives that ISUP cause code, it converts that code to a SIP response code, which is then sent to the Mediation Server itself. In turn, Skype for Business Server uses these response codes to make its outbound routing decisions. For example, a malfunctioning gateway might automatically be assigned a "less-preferred" status; this minimizes the use of the malfunctioning gateway, and thus maximizes the chance of a call being successfully completed.

However, not all gateways use the recommended ISUP cause code to SIP response code mapping used by Skype for Business Server. For these gateways, administrators can use the CsSipResponseCodeTranslationRule cmdlets to map the gateway SIP response code (in combination with the ISUP cause code, if that code is available) to a SIP response code used by Skype for Business Server. For example, a gateway might map ISUP cause code 34 ("No circuit/channel is available") to SIP response code 486 ("Busy here"). Based on a response code of 486, the outbound routing logic of Skype for Business Server will not attempt to find a new gateway in order to complete the call.

For Skype for Business Server, however, that SIP response code of 486 should instead be mapped to SIP response code 503. A response code of 503 triggers the retry mechanism in the outbound routing logic of Skype for Business Server; that means that the system will try to find another gateway in order to complete the call. To handle this situation, you can create a translation rule that maps the combination of ISUP cause code 34 and SIP response code 486 to a SIP response code of 503.

The Set-CsSipResponseCodeTranslationRule cmdlet provides a way for you to modify any of the translation rules previously configured for use in your organization.

Examples

-------------------------- Example 1 ------------------------

Set-CsSipResponseCodeTranslationRule -Identity "PstnGateway:192.168.0.240/Rule404" -ReceivedISUPCauseValue 477

The command shown in Example 1 modifies the ReceivedISUPCauseValue property for the translation rule with the Identity PstnGateway:192.168.0.240/Rule404.

-------------------------- Example 2 ------------------------

Set-CsSipResponseCodeTranslationRule -Identity "PstnGateway:192.168.0.240/Rule404" -Priority 0

In Example 2, the translation rule with the Identity PstnGateway:192.168.0.240/Rule404 is marked as the highest priority rule; that is, the rule that will be processed first. This is done by setting the Priority to 0.

-------------------------- Example 3 ------------------------

Get-CsSipResponseCodeTranslationRule | Set-CsSipResponseCodeTranslationRule -ReceivedISUPCauseValue -1

Example 3 shows how you can set the ReceivedISUPCauseValue property of all the translation rules configured for use in your organization to -1; that will cause the ISUP cause code to be ignored when translating rules. To do this the command first calls the Get-CsSipResponseCodeTranslationRule cmdlet without any parameters in order to return a collection of all the SIP response code translation rules currently in use. That collection is then piped to the Set-CsSipResponseCodeTranslationRule cmdlet, which modifies the ReceivedISUPCauseValue property for each item in the collection.

Parameters

-Confirm

-Force

-Identity

-Instance

-Priority

-ReceivedISUPCauseValue

-ReceivedResponseCode

-TranslatedResponseCode

-WhatIf

Inputs

Microsoft.Rtc.Management.WritableConfig.Settings.TrunkConfiguration.SipResponseCodeTranslationRule#Decorated object. The Set-CsSipResponseCodeTranslationRule cmdlet accepts pipelined instances of the SIP response code translation rule object.

Outputs

The Set-CsSipResponseCodeTranslationRule cmdlet does not return any objects or values. Instead, the cmdlet modifies instances of the Microsoft.Rtc.Management.WritableConfig.Settings.TrunkConfiguration.SipResponseCodeTranslationRule#Decorated object.

Related Links

• Get-CsSipResponseCodeTranslationRule
• New-CsSipResponseCodeTranslationRule
• Remove-CsSipResponseCodeTranslationRule