EventResetMode Sabit listesi

  • Başvuru

Tanım

Ad Alanı:
System.Threading
Bütünleştirilmiş Kod:
System.Threading.dll
Bütünleştirilmiş Kod:
mscorlib.dll
Bütünleştirilmiş Kod:
netstandard.dll

Sinyali aldıktan sonra bir EventWaitHandle öğesinin otomatik olarak mı yoksa el ile mi sıfırlanıp sıfırlamayacağını gösterir.

public enum class EventResetMode
public enum EventResetMode
[System.Runtime.InteropServices.ComVisible(false)]
public enum EventResetMode
type EventResetMode = 
[<System.Runtime.InteropServices.ComVisible(false)>]
type EventResetMode = 
Public Enum EventResetMode
Devralma
Object
ValueType
Enum
EventResetMode
Öznitelikler
ComVisibleAttribute

Alanlar

AutoReset 0

Sinyal gönderildiğinde, EventWaitHandle tek bir iş parçacığı serbest bırakıldıktan sonra otomatik olarak sıfırlanır. Bekleyen bir iş parçacığı yoksa, EventWaitHandle iş parçacığı engellenene kadar sinyalli kalır ve iş parçacığı serbest bırakıldıktan sonra sıfırlanır.
ManualReset 1

İşaretlendiğinde, EventWaitHandle bekleyen tüm iş parçacıklarını serbest bırakır ve el ile sıfırlanana kadar sinyalli kalır.

Örnekler

Aşağıdaki kod örneği, ana iş parçacığının SignalAndWait(WaitHandle, WaitHandle) engellenen bir iş parçacığına sinyal vermesine ve ardından iş parçacığının görevi bitirmesini beklemesine izin vermek için yöntemi aşırı yüklemesini kullanır.

Örnek beş iş parçacığı başlatır ve AutoReset bayrağıyla oluşturulan bir EventWaitHandle iş parçacığını engellemelerine olanak tanır, ardından kullanıcı ENTER tuşuna her bastığında bir iş parçacığı serbest bırakır. Örnek daha sonra beş iş parçacığını daha kuyruğa alır ve ManualReset bayrağıyla oluşturulan bir EventWaitHandle kullanarak bunların tümünü serbest bırakır.

using namespace System;
using namespace System::Threading;

public ref class Example
{
private:
   // The EventWaitHandle used to demonstrate the difference
   // between AutoReset and ManualReset synchronization events.
   //
   static EventWaitHandle^ ewh;

   // A counter to make sure all threads are started and
   // blocked before any are released. A Long is used to show
   // the use of the 64-bit Interlocked methods.
   //
   static __int64 threadCount = 0;

   // An AutoReset event that allows the main thread to block
   // until an exiting thread has decremented the count.
   //
   static EventWaitHandle^ clearCount =
      gcnew EventWaitHandle( false,EventResetMode::AutoReset );

public:
   [MTAThread]
   static void main()
   {
      // Create an AutoReset EventWaitHandle.
      //
      ewh = gcnew EventWaitHandle( false,EventResetMode::AutoReset );
      
      // Create and start five numbered threads. Use the
      // ParameterizedThreadStart delegate, so the thread
      // number can be passed as an argument to the Start
      // method.
      for ( int i = 0; i <= 4; i++ )
      {
         Thread^ t = gcnew Thread(
            gcnew ParameterizedThreadStart( ThreadProc ) );
         t->Start( i );
      }
      
      // Wait until all the threads have started and blocked.
      // When multiple threads use a 64-bit value on a 32-bit
      // system, you must access the value through the
      // Interlocked class to guarantee thread safety.
      //
      while ( Interlocked::Read( threadCount ) < 5 )
      {
         Thread::Sleep( 500 );
      }

      // Release one thread each time the user presses ENTER,
      // until all threads have been released.
      //
      while ( Interlocked::Read( threadCount ) > 0 )
      {
         Console::WriteLine( L"Press ENTER to release a waiting thread." );
         Console::ReadLine();
         
         // SignalAndWait signals the EventWaitHandle, which
         // releases exactly one thread before resetting,
         // because it was created with AutoReset mode.
         // SignalAndWait then blocks on clearCount, to
         // allow the signaled thread to decrement the count
         // before looping again.
         //
         WaitHandle::SignalAndWait( ewh, clearCount );
      }
      Console::WriteLine();
      
      // Create a ManualReset EventWaitHandle.
      //
      ewh = gcnew EventWaitHandle( false,EventResetMode::ManualReset );
      
      // Create and start five more numbered threads.
      //
      for ( int i = 0; i <= 4; i++ )
      {
         Thread^ t = gcnew Thread(
            gcnew ParameterizedThreadStart( ThreadProc ) );
         t->Start( i );
      }
      
      // Wait until all the threads have started and blocked.
      //
      while ( Interlocked::Read( threadCount ) < 5 )
      {
         Thread::Sleep( 500 );
      }

      // Because the EventWaitHandle was created with
      // ManualReset mode, signaling it releases all the
      // waiting threads.
      //
      Console::WriteLine( L"Press ENTER to release the waiting threads." );
      Console::ReadLine();
      ewh->Set();

   }

   static void ThreadProc( Object^ data )
   {
      int index = static_cast<Int32>(data);

      Console::WriteLine( L"Thread {0} blocks.", data );
      // Increment the count of blocked threads.
      Interlocked::Increment( threadCount );
      
      // Wait on the EventWaitHandle.
      ewh->WaitOne();

      Console::WriteLine( L"Thread {0} exits.", data );
      // Decrement the count of blocked threads.
      Interlocked::Decrement( threadCount );
      
      // After signaling ewh, the main thread blocks on
      // clearCount until the signaled thread has
      // decremented the count. Signal it now.
      //
      clearCount->Set();
   }
};

using System;
using System.Threading;

public class Example
{
    // The EventWaitHandle used to demonstrate the difference
    // between AutoReset and ManualReset synchronization events.
    //
    private static EventWaitHandle ewh;

    // A counter to make sure all threads are started and
    // blocked before any are released. A Long is used to show
    // the use of the 64-bit Interlocked methods.
    //
    private static long threadCount = 0;

    // An AutoReset event that allows the main thread to block
    // until an exiting thread has decremented the count.
    //
    private static EventWaitHandle clearCount = 
        new EventWaitHandle(false, EventResetMode.AutoReset);

    [MTAThread]
    public static void Main()
    {
        // Create an AutoReset EventWaitHandle.
        //
        ewh = new EventWaitHandle(false, EventResetMode.AutoReset);

        // Create and start five numbered threads. Use the
        // ParameterizedThreadStart delegate, so the thread
        // number can be passed as an argument to the Start 
        // method.
        for (int i = 0; i <= 4; i++)
        {
            Thread t = new Thread(
                new ParameterizedThreadStart(ThreadProc)
            );
            t.Start(i);
        }

        // Wait until all the threads have started and blocked.
        // When multiple threads use a 64-bit value on a 32-bit
        // system, you must access the value through the
        // Interlocked class to guarantee thread safety.
        //
        while (Interlocked.Read(ref threadCount) < 5)
        {
            Thread.Sleep(500);
        }

        // Release one thread each time the user presses ENTER,
        // until all threads have been released.
        //
        while (Interlocked.Read(ref threadCount) > 0)
        {
            Console.WriteLine("Press ENTER to release a waiting thread.");
            Console.ReadLine();

            // SignalAndWait signals the EventWaitHandle, which
            // releases exactly one thread before resetting, 
            // because it was created with AutoReset mode. 
            // SignalAndWait then blocks on clearCount, to 
            // allow the signaled thread to decrement the count
            // before looping again.
            //
            WaitHandle.SignalAndWait(ewh, clearCount);
        }
        Console.WriteLine();

        // Create a ManualReset EventWaitHandle.
        //
        ewh = new EventWaitHandle(false, EventResetMode.ManualReset);

        // Create and start five more numbered threads.
        //
        for(int i=0; i<=4; i++)
        {
            Thread t = new Thread(
                new ParameterizedThreadStart(ThreadProc)
            );
            t.Start(i);
        }

        // Wait until all the threads have started and blocked.
        //
        while (Interlocked.Read(ref threadCount) < 5)
        {
            Thread.Sleep(500);
        }

        // Because the EventWaitHandle was created with
        // ManualReset mode, signaling it releases all the
        // waiting threads.
        //
        Console.WriteLine("Press ENTER to release the waiting threads.");
        Console.ReadLine();
        ewh.Set();
    }

    public static void ThreadProc(object data)
    {
        int index = (int) data;

        Console.WriteLine("Thread {0} blocks.", data);
        // Increment the count of blocked threads.
        Interlocked.Increment(ref threadCount);

        // Wait on the EventWaitHandle.
        ewh.WaitOne();

        Console.WriteLine("Thread {0} exits.", data);
        // Decrement the count of blocked threads.
        Interlocked.Decrement(ref threadCount);

        // After signaling ewh, the main thread blocks on
        // clearCount until the signaled thread has 
        // decremented the count. Signal it now.
        //
        clearCount.Set();
    }
}

Imports System.Threading

Public Class Example

    ' The EventWaitHandle used to demonstrate the difference
    ' between AutoReset and ManualReset synchronization events.
    '
    Private Shared ewh As EventWaitHandle

    ' A counter to make sure all threads are started and
    ' blocked before any are released. A Long is used to show
    ' the use of the 64-bit Interlocked methods.
    '
    Private Shared threadCount As Long = 0

    ' An AutoReset event that allows the main thread to block
    ' until an exiting thread has decremented the count.
    '
    Private Shared clearCount As New EventWaitHandle(False, _
        EventResetMode.AutoReset)

    <MTAThread> _
    Public Shared Sub Main()

        ' Create an AutoReset EventWaitHandle.
        '
        ewh = New EventWaitHandle(False, EventResetMode.AutoReset)

        ' Create and start five numbered threads. Use the
        ' ParameterizedThreadStart delegate, so the thread
        ' number can be passed as an argument to the Start 
        ' method.
        For i As Integer = 0 To 4
            Dim t As New Thread(AddressOf ThreadProc)
            t.Start(i)
        Next i

        ' Wait until all the threads have started and blocked.
        ' When multiple threads use a 64-bit value on a 32-bit
        ' system, you must access the value through the
        ' Interlocked class to guarantee thread safety.
        '
        While Interlocked.Read(threadCount) < 5
            Thread.Sleep(500)
        End While

        ' Release one thread each time the user presses ENTER,
        ' until all threads have been released.
        '
        While Interlocked.Read(threadCount) > 0
            Console.WriteLine("Press ENTER to release a waiting thread.")
            Console.ReadLine()

            ' SignalAndWait signals the EventWaitHandle, which
            ' releases exactly one thread before resetting, 
            ' because it was created with AutoReset mode. 
            ' SignalAndWait then blocks on clearCount, to 
            ' allow the signaled thread to decrement the count
            ' before looping again.
            '
            WaitHandle.SignalAndWait(ewh, clearCount)
        End While
        Console.WriteLine()

        ' Create a ManualReset EventWaitHandle.
        '
        ewh = New EventWaitHandle(False, EventResetMode.ManualReset)

        ' Create and start five more numbered threads.
        '
        For i As Integer = 0 To 4
            Dim t As New Thread(AddressOf ThreadProc)
            t.Start(i)
        Next i

        ' Wait until all the threads have started and blocked.
        '
        While Interlocked.Read(threadCount) < 5
            Thread.Sleep(500)
        End While

        ' Because the EventWaitHandle was created with
        ' ManualReset mode, signaling it releases all the
        ' waiting threads.
        '
        Console.WriteLine("Press ENTER to release the waiting threads.")
        Console.ReadLine()
        ewh.Set()
        
    End Sub

    Public Shared Sub ThreadProc(ByVal data As Object)
        Dim index As Integer = CInt(data)

        Console.WriteLine("Thread {0} blocks.", data)
        ' Increment the count of blocked threads.
        Interlocked.Increment(threadCount)

        ' Wait on the EventWaitHandle.
        ewh.WaitOne()

        Console.WriteLine("Thread {0} exits.", data)
        ' Decrement the count of blocked threads.
        Interlocked.Decrement(threadCount)

        ' After signaling ewh, the main thread blocks on
        ' clearCount until the signaled thread has 
        ' decremented the count. Signal it now.
        '
        clearCount.Set()
    End Sub
End Class

Şunlara uygulanır