Autoload Settings (Windows CE 5.0)

  • 项目

Send Feedback

Auto-load file system settings specify automatically loaded file systems that do not have associated block drivers, such as the Release File System (relfsd) and network file systems.

Unlike other branches in the registry tree, values assigned at the HKEY_LOCAL_MACHINE\System\StorageManager\Autoload level do not apply to lower subkeys. Autoload settings apply to one key and one set of values.

The following table shows registry values that apply only to auto-load file systems and auto-load block drivers.

Value: type Description
LoadFlags: REG_DWORD Controls how the file system is loaded.
  • 1 - Loads the file system synchronously. This value is required to auto-load in boot phases 0 or 1.
  • 2 - Loads the file system asynchronously on another thread. (Default) Supported only for boot phase 2.
BootPhase: REG_DWORD Controls the boot phase during which the file system is loaded.
  • 0 - Loads file system before initializing locale.
  • 1 - Loads file system after initializing locale, but before the full registry is functional.
  • 2 - Loads file system after the registry is fully functional.
Dll: REG_SZ Specifies the name of the FSD DLL.
Order: REG_DWORD Indicates the load order relative to other Auto-load systems in the same boot phase. Lower order numbers are loaded earlier.

For example, the following registry key tells the file system to auto-load the default settings for relfsd.

[HKEY_LOCAL_MACHINE\System\StorageManager\Autoload\Relfsd]
    "Dll"="relfsd.dll"
    "Paging"=dword:1
    "LoadFlags"= dword:1

See Also

File Systems Registry Settings Overview | Settings for Specific File Systems | Release Directory File System Registry Settings

Send Feedback on this topic to the authors

Feedback FAQs

© 2006 Microsoft Corporation. All rights reserved.