Hardware Detection with Target Analyzer

5/10/2007

Target Analyzer detects the hardware on the system, and creates a file that can be used to add the required driver components to your configuration.

In This Section

• How to Add Hardware Information to a Configuration
  Describes the end-to-end procedure for running Target Analyzer on a device, importing the hardware information, and adding it into your configuration.

• Target System Requirements
  Describes the hardware requirements for Windows XP Embedded.

• Running Target Analyzer
  Describes how to run Target Analyzer to create a .pmq file.

• Target Analyzer Commands
  Describes the Target Analyzer command syntax.

• Target Analyzer Hardware Detection Capabilities
  Describes the differences in hardware detection capabilities between Tap.exe and Ta.exe.

Related Sections

• Identify Target Device Hardware
  Describes how to identify the hardware on your target system by using Target Analyzer.

• Detect Hardware Devices with Target Analyzer and Windows PE
  Describes how to boot the target device by using Windows PE. This allows you to detect hardware on a device that has no hard drive or operating system, and provides a smaller, more efficient hardware list.

• Windows Preinstallation Environment
  Describes how you can use Windows PE to bring up a device that has no operating system or hard drive, run Target Analyzer to create a device list, format and partition a hard drive with Diskpart, and connect to a network. After an image is installed on the device, you can also use Windows PE to fine-tune the files and registry.

• Development Process
  Describes the overall development process to use to create a run-time image.