IPv6tun (Windows Embedded CE 6.0)

1/6/2010

This command-line tool configures the 6to4 and ISATAP tunneling capabilities.

         [] [options]

Parameters

  • -d
    Sends the output to the debug output port.
  • options
    Specifies the option to perform. The following table shows the options available in Windows CE .NET 4.1 and later.

    Value Description

    enable [Isatap | 6to4 | All] [automatic]

    Enables tunneling with the specified service.

    disable [Isatap | 6to4 | All]

    Disables tunneling with the specified service.

    server [Isatap ] [server name]

    Sets server name.

    relay [relay name]

    Sets relay name for 6to4 tunnel.

    show [Isatap | 6to4 | All]

    Shows tunneling details.

Examples

To enable IPv6 Isatap tunneling, type the following command:

Ipv6tun enable Isatap

To enable IPv6 6to4 tunneling, type the following command:

Ipv6tun enable 6to4

To enable both tunneling options, type the following command:

Ipv6tun enable all

To disable Ipv6 Isatap tunneling, type the following command:

Ipv6tun disable Isatap

To disable Ipv6 6to4 tunneling, type the following command:

Ipv6tun disable 6to4

To disable both tunneling options, type the following command:

Ipv6tun disable all

To set the isatap server name, type the following command:

Ipv6tun server isatap <server name>

To set the 6to4 relay name, type the following command:

Ipv6tun relay <relay name>

To show status of Isatap tunneling, type the following command:

Ipv6tun show Isatap

To show status of 6to4 tunneling, type the following command:

Ipv6tun show 6to4

To show status of all ipv6 tunneling options, type the following command:

Ipv6tun show all

Security Issues

When tunneling, be sure to increase the protection of your network by using firewalls. You can use a hardware firewall or a client software firewall.

Unlike IPv4, IPv6 does not use the network address translation (NAT) functionality to connect to the external network.

To avoid exposing internal devices directly on the external public network, you must configure the IP firewall on the gateway. For information about configuring the IP firewall to properly manage traffic destined for the internal network, see IP Firewall OS Design Development.

See Also

Other Resources

Network Utilities Application Development