Interrupt IOCTLs Test (User Mode) (Windows Embedded CE 6.0)
1/6/2010
The Interrupt IOCTLs Test (User Mode) assesses the behavior of interrupt-related IOCTLs in the OEM Adaptation Layer (OAL) in user mode. The IOCTLs tested are:
- IOCTL_HAL_REQUEST_SYSINTR
- IOCTL_HAL_RELEASE_SYSINTR
- IOCTL_HAL_REQUEST_IRQ
The OAL Timer Tests and the OAL KITL Tests provide good interrupt coverage, and should be included in any CETK interrupt-testing solution. Note that interrupt testing cannot be isolated from the device drivers that use these interrupts nor from the timer routines that use the system tick.
In This Section
- Prerequisites for the Interrupt IOCTLs Test (User Mode)
Specifies the hardware and software requirements for this test
- Test Cases for the Interrupt IOCTLs Test (User Mode)
Describes the test cases for this test
- Command Line Parameters for the Interrupt IOCTLs Test (User Mode)
Describes the command line parameters for this test
- Troubleshooting the Interrupt IOCTLs Test (User Mode)
Provides troubleshooting information for this test