IDirectDrawVideoPort::WaitForSync

This method waits for either the video VSYNC or until a given scan line is being drawn.

HRESULT WaitForSync(
  DWORD dwFlags, 
  DWORD dwLine, 
  DWORD dwTimeout
); 

Parameters

• dwFlags
  Flag specifying how the method will wait for the video VSYNC or the specified line number. The following table shows the possible flags.

  Flag	Description
  DDVPWAIT_BEGIN	Return at the start of the vertical blanking interval.
  DDVPWAIT_END	Return at the end of the vertical blanking interval.
  DDVPWAIT_LINE	Return when the video counter either reaches or passes the line specified by the dwLine parameter.

• dwLine
  The video line determining when the method should return, relative to the field height, before prescaling. This parameter is ignored if the dwFlags parameter is set to DDVPWAIT_BEGIN or DDVPWAIT_END.
• dwTimeout
  Amount of time, in milliseconds, that the method will wait for the next video vertical blank before timing out. If this parameter is 0, the method waits 3 times the value specified in the dwMicrosecondsPerField member of the DDVIDEOPORTDESC.

Return Values

If the method succeeds, the return value is DD_OK.

If the method fails, the return value may be one of the following error values:

Remarks

This method helps the caller synchronize with the video vertical blank interval or with an arbitrary line of video data. The method blocks the calling thread until either the video VSYNC occurs or the video line counter matches the specified line number.

Requirements

OS Versions: Windows CE 2.12 and later. Version 2.12 requires DXPAK 1.0 or later.
Header: Dvp.h.
Link Library: Ddraw.lib.

 Last updated on Thursday, April 08, 2004

© 1992-2003 Microsoft Corporation. All rights reserved.