ARM Integrator AP SDB Supported Features
The following table shows the supported features in the board support package (BSP) for the hardware components on the ARM Integrator AP SDB for ARM920 microprocessors.
| Hardware component | Hardware support | BSP support |
|---|---|---|
| RAM | 32 MB or 64 MB DIMM | Up to 64 MB |
| Flash | 32 MB Intel StrataFlash | Yes |
| Boot ROM | Yes | Not applicable |
| Timers | Yes | Yes |
| Real-time clock | Yes | Yes |
| VGA | PCI card | All supported PCI display cards |
| LCD | No | Not applicable |
| Ethernet | PCI card | All supported PCI Ethernet cards for Product Ethernet or Debug Ethernet |
| Serial | 2 | Yes, the first is used for debug messages by default. |
| PCMCIA or CF | PCI card | PCI drivers |
| Mouse | PS/2 | Yes |
| Keyboard | PS/2 | Yes |
| Hardware reset through a cold boot | Yes | Yes |
| Hardware reset through a warm boot | Yes | Yes |
| Software reset through a warm boot | Yes | Yes |
| Touch controller | No | Not applicable |
| Universal serial bus (USB) host | PCI card | OHCI and UHCI drivers |
| USB function | PCI card (Netchip 2890) | Netchip 2890 driver (serial or rNDIS interface) |
| Serial Infrared (SIR) | Yes | Yes |
| Fast Infrared (FIR) | No | Not applicable |
| Audio output | PCI card | Yes |
| Audio input | PCI card | Yes |
| Parallel for printing | 0 | Not applicable |
| Integrated Device Electronics (IDE) | PCI card | Yes |
| Smart card | USB and PCMCIA Readers | Not Tested |
| IEEE 1394 | PCI card | Yes |
| Floppy disk | No | Not applicable |
| TV output | PCI card | TVIA5000 driver |
| Floating point unit | Yes | Yes |
| Expansion connector | PCI, compact PCI, proprietary | PCI, compact PCI, proprietary |
| PCI slots | 3 | Yes |
| Compact PCI or PCI extender | PCI extender | Yes |
| Logic analyzer probes | Yes | Not applicable |
| JTAG | Yes | Not applicable |
| Debug LEDs | Yes, two digits | Yes |
| Companion or add-on cards | No | Not applicable |
| Form factor | ATX and compact PCI | Not applicable |
Hardware Supported by the ARM Integrator AP SDB
The following table shows the hardware supported by the ARM Integrator AP BSP.
| Type of adapter | Supported |
|---|---|
| Network | NE2000 compatible or SMC 9000
Note Other network cards can be supported in the boot loader and/or OAL, but would require source modifications to reference other Ethernet debug driver libraries. |
| Serial | Any supported by Windows CE |
| Sound | Any supported by Windows CE |
| Video | ATI
TVIA5000 MQ200 Perm3 Note If you are using the MQ200 display card, be sure that switch S1 on the MQ200 is set to the down position. Otherwise, the MQ200 display card will not function correctly. |
ARM Integrator AP SDB Hardware Restrictions and Limitations
- The ARM Integrator AP SDB is not best suited for performing many of the multimedia tests due to the poor performance attributed to this hardware. This is a hardware limitation on the board caused by CPU-to-memory bandwidth limitations.
See Also
How to Use the BSP for the ARM Integrator AP SDB | Setting Up the ARM Integrator AP SDB Hardware
Last updated on Wednesday, April 13, 2005
© 2005 Microsoft Corporation. All rights reserved.