Downloading the OS Image to the Hitachi US7729 HARP (Keywest) SDB

  • 项目

If the Windows CE boot loader is already downloaded to the Hitachi US7729 HARP (Keywest) SDB, you can download the OS image.

To download the OS image to the Hitachi US7729 HARP (Keywest) SDB

  1. Turn off the Hitachi US7729 HARP (Keywest) SDB.

  2. Set DIP switch SW1 on the Hitachi US7729 HARP (Keywest) SDB to the settings shown in the table below.

    The switch is located on the back side of the Hitachi US7729 HARP (Keywest) SDB, on the left, near the power connecter.

    Switch Setting
    SW1-1 Off
    SW1-2 Off
    SW1-3 Off
    SW1-4 On

  3. Turn on the Hitachi US7729 HARP (Keywest) SDB.

  4. Download the OS image.

    For more information, see Downloading an OS Image to a Target Device.

See Also

How to Use the BSP for the Hitachi US7729 HARP (Keywest) SDB | Downloading the Boot Loader to the Hitachi US7729 HARP (Keywest) SDB to Flash

Last updated on Wednesday, April 13, 2005

© 2005 Microsoft Corporation. All rights reserved.