SMDK2410 Samsung MCU Development Kit Supported Features
The following table shows the supported features in the board support package (BSP) for the hardware components on the SMDK2410 Samsung MCU Development Kit for the Samsung S3C2410X01 RISC microprocessor based on the ARM920T core.
| Hardware component | Hardware support | BSP support |
|---|---|---|
| RAM | Yes | Yes |
| Flash | Yes | Yes |
| Boot ROM | Yes | Yes |
| Timers | Yes | Yes |
| Real-time clock | Yes | Yes |
| VGA | No | No |
| LCD | Yes | Yes |
| Ethernet | Built-in | Yes |
| Serial | 2 | Yes |
| PCMCIA or CF | Yes | Yes |
| Secure Digital | Yes | No |
| Mouse | Universal serial bus (USB) | Yes |
| Keyboard | USB and onboard | Yes |
| Hardware reset through a cold boot | Yes | Yes |
| Hardware reset through a warm boot | Yes | Yes |
| Software reset through a warm boot | Yes | Yes |
| Touch controller | Yes | Yes |
| Universal serial bus (USB) host | Yes | OHCI drivers |
| USB function | Yes | No |
| Serial Infrared (SIR) | Yes | No |
| Fast Infrared (FIR) | Yes | No |
| Audio output | Onboard | Yes |
| Audio input | Onboard | Yes |
| Parallel for printing | No | Not applicable |
| Integrated Device Electronics (IDE) | No | Not applicable |
| Smart card | No | Not applicable |
| IEEE 1394 | No | Not applicable |
| Floppy disk | No | Not applicable |
| TV output | No | Not applicable |
| Floating point unit | No | Not applicable |
| Expansion connector | Custom | No |
| PCI slots | No | Not applicable |
| Compact PCI or PCI extender | No | Not applicable |
| Logic analyzer probes | Yes | Yes |
| JTAG | Yes | Yes |
| Debug LEDs | Yes | Yes |
| Companion or add-on cards | No | Not applicable |
| Form factor | 5V ATX | Yes |
SMDK2410 Samsung MCU Development Kit Hardware Limitations
- If you are experiencing flash memory problems — for example, Multi-ICE cannot write to flash memory, or the boot loader image does not boot after a period of time — press down the sides of socket U10 while you adjust the NOR flash memory part, and then release pressure on the socket.
- To avoid problems, such as Multi-ICE causing the system to power down, always use the power supply provided with the SMDK2410 Samsung MCU Development Kit and do not substitute another ATX power supply.
- There are no handshaking signals on COM1. If you want to use COM2 for handshaking or RAS, be sure that jumper J17 is set. For more information about the correct settings for jumper J17, see Modifying the SMDK2410 Samsung MCU Development Kit Switches and Jumpers.
See Also
How to Use the BSP for the SMDK2410 Samsung MCU Development Kit | Setting up the SMDK2410 Samsung MCU Development Kit Hardware
Last updated on Wednesday, April 13, 2005
© 2005 Microsoft Corporation. All rights reserved.