Updating Config.bib with a New RAM Mapping

项目
06/30/2006

If you have updated the OEMAddressTable definition with a new RAM mapping, you must update the Config.bib file for your platform. For more information about Config.bib, see Binary Image Builder File.

To update the Config.bib file with a new RAM mapping

In the Workspace window, on the ParameterView tab, expand the _WINCEROOT node.

By default, _WINCEROOT is C:\WINCE420.
Expand the _TGTPLAT node, which is the string representing the BSP you chose in the New Platform Wizard.
Expand the Hardware Specific Files node.
To open the Config.bib file for editing within Platform Builder, double-click the file.
Find the RAM line to edit in Config.bib.

You do not need to edit the RAMIMAGE line because AUTOSIZE adjusts the boundary between RAMIMAGE and RAM if your run-time image (Nk.bin) is too large for the amount specified by RAMIMAGE.

If you did not set IMGRAM16, IMGRAM32, or IMGRAM64, the following code example from Config.bib shows the RAM setting to edit
```
IF IMGRAM16 !
IF IMGRAM32 !
IF IMGRAM64 !
  NK   80220000  009E0000  RAMIMAGE ; Reserves 9.875 MB for nk.bin
  RAM  80C00000  01000000  RAM      ; Reserves 16 MB for RAM
ENDIF
ENDIF
ENDIF
```
- or -

If you set IMGRAM16, the following code example from Config.bib shows the RAM setting to edit.
```
IF IMGRAM16
  NK   80220000  009E0000  RAMIMAGE
  RAM  80C00000  00400000  RAM
ENDIF
```
- or -

If you set IMGRAM32, the following code example from Config.bib shows the RAM setting to edit.
```
IF IMGRAM32
  NK   80220000  009E0000  RAMIMAGE
  RAM  80C00000  01400000  RAM
ENDIF
```
- or -

If you set IMGRAM64, the following code example from Config.bib shows the RAM setting to edit.
```
IF IMGRAM64
  NK   80220000  009E0000  RAMIMAGE
  RAM  80C00000  03400000  RAM
ENDIF
```
Copy the line containing the RAM setting you will edit, and paste the line directly above or below the line you copied.
Place the ';' delimiter at the beginning of the original line of code.
For the line of code you pasted, edit the RAM entry to take advantage of the new RAM mapping.

The RAM size you choose must be 4 KB aligned.

The following code example shows the updated default RAM setting in the Config.bib file, which takes advantage of the new RAM mapping. If you set one of the IMGRAM16, IMGRAM32, or IMGRAM64 environment variables, update the appropriate section of the Config.bib file.
```
IF IMGRAM16 !
IF IMGRAM32 !
IF IMGRAM64 !
  NK   80220000  009E0000  RAMIMAGE ; Reserves 9.875 MB for nk.bin
  RAM  80C00000  07400000  RAM      ; Reserves 116 MB for RAM
ENDIF
ENDIF
ENDIF
```
Save the Config.bib file to save your new RAM mapping.

通过

Updating Config.bib with a New RAM Mapping

See Also

其他资源