Configuring CLIENT1

  • 项目

In the IPv6 test lab, configure CLIENT1 as a client computer.

To configure CLIENT1

  1. Configure the TCP/IP protocol using the following addresses:

    • IP address: 10.0.1.3
    • Subnet mask: 255.255.255.0
    • Default gateway: 10.0.1.1

    For more information, see Configuring a Device with a Static Address for the IPv6 Test Lab.

  2. Verify the IP address by using IPConfig.

See Also

Creating the Platforms for the IPv6 Test Lab | How to Set Up and Use an IPv6 Test Lab | IPConfig

 Last updated on Tuesday, May 18, 2004

© 1992-2003 Microsoft Corporation. All rights reserved.