Establishing a Connection to a Target Device with ActiveSync

  • 项目

If the Windows CE OS on the target device includes an Ethernet driver, ensure that the Ethernet driver and ActiveSync are configured so that their Internet Protocol (IP) addresses are on different subnets. If the Ethernet driver and ActiveSync share the same subnet, the target device uses Ethernet as the default route for communications. This setup causes the connection between the development workstation and the target device over ActiveSync to fail.

To establish a connection to a target device with ActiveSync

  1. On your development workstation, install ActiveSync 3.5.

  2. Connect a null modem or crossover cable from your development workstation to your target device.

  3. Download an OS image to your target device.

  4. On your target device, start Repllog.exe.

    Note   To add the Repllog.exe executable to the target device, you must include the ActiveSync feature of the Windows CE OS in your OS image.

  5. On your desktop computer, choose Get Connected from the File menu of the ActiveSync window.

  6. After you establish a connection to your target device, choose Guest.

  7. Open a remote tool, and then use Platform Manager to establish a connection.

    For more information, see Connecting to a Target Device with a Remote Tool.

See Also

ActiveSync Startup Server | ActiveSync Transport | Transport Selection

 Last updated on Friday, October 08, 2004

© 1992-2003 Microsoft Corporation. All rights reserved.