!usbkd.usbhubinfo
!usbkd.hubinfo 命令显示有关 USB 集线器的信息。
!usbkd.hubinfo FDO
参数
FDO
USB 集线器的功能设备对象 (FDO) 地址。
DLL
Usbkd.dll
示例
下面是查找 USB 集线器 FDO 地址的一种方法。 首先输入 !usbkd.usb2tree。
0: kd> !usbkd.usb2tree
...
2)!ehci_info ffffe00001ca11a0 !devobj ffffe00001ca1050 PCI: VendorId 8086 DeviceId 293c RevisionId 0002
RootHub !hub2_info ffffe000023201a0 !devstack ffffe00002320050
在前面的输出中，集线器 FDO 的地址作为建议命令 !devstack ffffe00002320050 的参数出现。
现在，将 FDO 的地址传递给 !usbhubinfo 命令。
0: kd> !usbkd.usbhubinfo ffffe00002320050
!DevObj ffffe00002320050 !usbhubext ffffe000023201a0
On Host Controller (0x8086, 0x293c)
Stat_AsyncResumeStartAt: 2437ee39d29bd528
Stat_AsyncResumeCompleteAt: 24413c77d29bd528
Stat_AsyncResume: 0x3c(60) ms
Stat_SyncResumeStartAt: 2437ee39d29bd528
Stat_SyncResumeCompleteAt: 2437ee39d29bd528
Stat_SyncResume: 0x0(0) ms
Trap Regs: Event, Port, Event (ffffe000023204d0)
Enable: 0 Port: 0 Event 00000000
Hub Number: # 3
Number Of Ports: 4
dt usbhub!_USBHUB_FDO_FLAGS ffffe00002320ba0
>Is Root
>Power Switching:
No Power Switching
>Overcurrent:
Global Overcurrent
>PortIndicators:
No PortIndicators present
>AllowWakeOnConnect:
DO NOT WakeOnConnect
>CURRENT Hub Wake on Connectstate:
HWC_DISARM:- do not wake system on connect/disconnect event
>CURRENT Bus Wake state:
BUS_DISARM:- bus not armed for wake by this hub
>CURRENT Wake Detect state (WW Irp):
HUB_DISARM:- no ww irp pending (HUB_WAKESTATE_DISARMED)
Milliamps/Port : 500ma
Power caps (0 = not reported)
PortPower_Registry : 0
PortPower_DeviceStatus : 500
PortPower_CfgDescriptor : 500
PortPower_HubStatus : 500