WMI 任务:桌面管理

用于桌面管理的 WMI 任务可以施加控制,并从远程桌面或本地计算机获取数据。 例如,你可以确定本地计算机上的屏幕保护程序是否需要密码。 WMI 还能够关闭远程计算机。 有关其他示例,请通过 https://www.microsoft.com/technet 访问 TechNet ScriptCenter。

本主题中所示的脚本示例仅从本地计算机获取数据。 有关如何使用脚本从远程计算机获取数据的详细信息,请参阅连接到远程计算机上的 WMI

以下过程介绍了如何运行脚本。

运行脚本

  1. 复制代码并将其保存在扩展名为 .vbs 的文件中,例如 filename.vbs。 确保文本编辑器不会向该文件添加 .txt 扩展名。
  2. 打开命令提示符窗口并导航到保存该文件的目录。
  3. 在命令提示符下键入 cscript filename.vbs。
  4. 如果无法访问事件日志,请进行检查以查看是否正从提升的命令提示符运行。 某些事件日志(例如安全事件日志)可能受用户访问控制 (UAC) 的保护。

注意

默认情况下,cscript 会在命令提示符窗口中显示脚本的输出。 由于 WMI 脚本可以生成大量输出,因此可能需要将输出重定向到文件。 在命令提示符下键入 cscript filename.vbs > outfile.txt 以将 filename.vbs 脚本的输出重定向到 outfile.txt。

下表列出了可用于从本地计算机获取各种类型的数据的脚本示例。

如何实现... WMI 类或方法
...确定远程计算机是否已在具有网络状态的安全模式下启动? 使用 Win32_ComputerSystem 类并检查 PrimaryOwnerName 属性的值。
VB
strComputer = "."
Set objWMIService = GetObject("winmgmts:" & "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
Set colSettings = objWMIService.ExecQuery ("Select * from Win32_ComputerSystem")
For Each objComputer in colSettings 
    Wscript.Echo "System Name: " & objComputer.Name
    Wscript.Echo "Registered owner: " & objComputer.PrimaryOwnerName
Next
PowerShell
$colSettings = Get-WmiObject -Class Win32_ComputerSystem
foreach ($objComputer in $colSettings)
{
    "System Name: " + $objComputer.Name
    "Registered owner: " + $objComputer.PrimaryOwnerName
}
...确定计算机屏幕保护程序是否需要密码?

使用 Win32_Desktop 类并检查 ScreenSaverSecure 属性的值。

VB
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_Desktop")
For Each objItem in colItems
    Wscript.Echo "Screen Saver Secure: " & objItem.ScreenSaverSecure
Next
PowerShell
$Computer = "."
$Desktops = Get-WMIObject -class Win32_Desktop -ComputerName $computer
"{0} desktops found as follows" -f $desktops.count
foreach ($desktop in $desktops) {
     "Desktop      : {0}"  -f $Desktop.Name
     "Screen Saver : {0}"  -f $desktop.ScreensaverExecutable
     "Secure       : {0} " -f $desktop.ScreenSaverSecure
     ""
}
...验证是否已将计算机屏幕设置为 800 x 600 像素?

使用 Win32_DesktopMonitor 类并检查 ScreenHeight 和 ScreenWidth 属性的值。

VB
strComputer = "."
Set objWMIService = GetObject(_
    "winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_DesktopMonitor")
For Each objItem in colItems
    Wscript.Echo "Screen Height: " & objItem.ScreenHeight
    Wscript.Echo "Screen Width: " & objItem.ScreenWidth
Next

PowerShell
              
              <# Get desktop information #>
$computer = "." $desktops = Get-WmiObject -Class Win32_DesktopMonitor $hostname = hostname

<# Display desktop details #> "There are {0} Desktops on {1} as follows:" -f $desktops.Count, $hostname "" $i=1 # count of desktops on this system

foreach ($desktop in $desktops) { "Desktop {0}: {1}" -f $i++, $Desktop.Caption "Screen Height : {0}" -f $desktop.ScreenHeight "Screen Width : {0}" -f $desktop.ScreenWidth "" }

...确定计算机运行了多长时间?

使用 Win32_OperatingSystem 类和 LastBootUpTime 属性。 从当前时间减去该值可得出系统运行时间。

VB
strComputer = "."
Set objWMIService = GetObject("winmgmts:" & "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
Set colOperatingSystems = objWMIService.ExecQuery ("Select * from Win32_OperatingSystem")
 
For Each objOS in colOperatingSystems
    dtmBootup = objOS.LastBootUpTime
    dtmLastBootUpTime = WMIDateStringToDate(dtmBootup)
    dtmSystemUptime = DateDiff("h", dtmLastBootUpTime, Now)
    Wscript.Echo dtmSystemUptime 
Next
 
Function WMIDateStringToDate(dtmBootup)
    WMIDateStringToDate =  CDate(Mid(dtmBootup, 5, 2) & "/" & _
        Mid(dtmBootup, 7, 2) & "/" & Left(dtmBootup, 4) & " " & Mid (dtmBootup, 9, 2) & ":" & _
        Mid(dtmBootup, 11, 2) & ":" & Mid(dtmBootup, 13, 2))
End Function

PowerShell
              
              function WMIDateStringToDate($Bootup) { [System.Management.ManagementDateTimeconverter]::ToDateTime($Bootup) }

<# Main script #> $Computer = "." # adjust as needed $computers = Get-WMIObject -class Win32_OperatingSystem -computer $computer

foreach ($system in $computers) { $Bootup = $system.LastBootUpTime $LastBootUpTime = WMIDateStringToDate($Bootup) $now = Get-Date $Uptime = $now-$lastBootUpTime "System Up for: {0}" -f $UpTime }

...重新启动或关闭远程计算机?

使用 Win32_OperatingSystem 类和 Win32Shutdown 方法。 连接到 WMI 时,必须包含 RemoteShutdown 特权。 有关详细信息,请参阅使用 VBScript 执行特权操作。 与 Win32_OperatingSystem 上的 Shutdown 方法不同,Win32Shutdown 方法允许设置标志来控制关闭行为。

VB
strComputer = "atl-dc-01"
Set objWMIService = GetObject("winmgmts:" & "{impersonationLevel=impersonate,(Shutdown)}!\\" & strComputer & "\root\cimv2")
Set colOperatingSystems = objWMIService.ExecQuery ("Select * from Win32_OperatingSystem")
For Each objOperatingSystem in colOperatingSystems
    ObjOperatingSystem.Shutdown(1)
Next
PowerShell
strComputer = "atl-dc-01"
$colOperatingSystem = Get-WmiObject -Class Win32_OperatingSystem -ComputerName $strComputer -Namespace "wmi\cimv2"
foreach ($objOperatingSystem in $colOperatingSystem)
{
    [void]$objOperatingSystem.Shutdown()
}
...确定每次启动 Windows 时自动运行哪些应用程序?

使用 Win32_StartupCommand 类。

VB
strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
    & "{impersonationLevel=impersonate}!\\" _
    & strComputer & "\root\cimv2")
Set colStartupCommands = objWMIService.ExecQuery _
    ("Select * from Win32_StartupCommand")
For Each objStartupCommand in colStartupCommands
    Wscript.Echo "Command: " & objStartupCommand.Command & VBNewLine _
    & "Description: " & objStartupCommand.Description & VBNewLine _
    & "Location: " & objStartupCommand.Location & VBNewLine _
    & "Name: " & objStartupCommand.Name & VBNewLine _
    & "SettingID: " & objStartupCommand.SettingID & VBNewLine _
    & "User: " & objStartupCommand.User
Next
PowerShell
$strComputer = "."
$colItems = Get-WmiObject -Class Win32_StartupCommand -ComputerName $strComputer
foreach ($objStartupCommand in $colItems) 
{ 
    "Command: " + $objStartupCommand.Command
    "Description: " + $objStartupCommand.Description 
    "Location: " + $objStartupCommand.Location 
    "Name: " + $objStartupCommand.Name 
    "SettingID: " + $objStartupCommand.SettingID 
    "User: " + $objStartupCommand.User
}

脚本和应用程序的 WMI 任务

WMI C++ 应用程序示例

TechNet ScriptCenter