PIBIO_SENSOR_FINISH_CAPTURE_FN回呼函式 (winbio_adapter.h)

由 Windows 生物特徵辨識架構呼叫，以等候 SensorAdapterStartCapture 函式起始的擷取作業完成。

語法

PIBIO_SENSOR_FINISH_CAPTURE_FN PibioSensorFinishCaptureFn;

HRESULT PibioSensorFinishCaptureFn(
  [in, out] PWINBIO_PIPELINE Pipeline,
  [out]     PWINBIO_REJECT_DETAIL RejectDetail
)
{...}

參數

[in, out] Pipeline

與執行作業之生物特徵辨識單位相關聯的 WINBIO_PIPELINE 結構的指標。

[out] RejectDetail

WINBIO_REJECT_DETAIL值的指標，接收擷取生物特徵辨識樣本失敗的其他資訊。 如果作業成功，此參數會設定為零。 以下是針對指紋樣本定義的值：

• WINBIO_FP_TOO_HIGH
• WINBIO_FP_TOO_LOW
• WINBIO_FP_TOO_LEFT
• WINBIO_FP_TOO_RIGHT
• WINBIO_FP_TOO_FAST
• WINBIO_FP_TOO_SLOW
• WINBIO_FP_POOR_QUALITY
• WINBIO_FP_TOO_SKEWED
• WINBIO_FP_TOO_SHORT
• WINBIO_FP_MERGE_FAILURE

傳回值

如果函式成功，則會傳回S_OK。 如果函式失敗，它會傳回 指出錯誤的 HRESULT 值。 Windows 生物特徵辨識架構會辨識下列值。

備註

Windows 生物特徵辨識架構會在成功呼叫 SensorAdapterStartCapture 或呼叫 SensorAdapterCancel 之後呼叫此函式。 如果 對 SensorAdapterStartCapture 的呼叫失敗，它就不會呼叫此函式。

當此函式的實作傳回時，管線中的數據應該準備好進行 後續呼叫，例如 SensorAdapterPushDataToEngine 或 SensorAdapterExportSensorData。

這是封鎖函式，只有在感測器 I/O 作業成功、失敗或已取消之後才會傳回。 一般而言，您會將感測器配接器內容中的 OVERLAPPED 結構傳遞至 GetOverlappedResult 函式，讓此函式成為區塊。 當 SensorAdapterFinishCapture 傳回時，重疊結構中的 hEvent 句柄必須發出訊號。 GetOverlappedResult 函式會在偵測到感測器 I/O 作業結束時自動設定此句柄。 如果您的配接器使用其他機制來偵測 I/O 完成，您必須自行發出訊號。

範例

下列虛擬程式代碼顯示此函式的一個可能實作。 此範例不會編譯。 您必須調整它以符合您的用途。

//////////////////////////////////////////////////////////////////////////////////////////
//
// SensorAdapterFinishCapture
//
// Purpose:
//      Waits for the completion of a capture operation initiated by the 
//      SensorAdapterStartCapture function.
//      
// Parameters:
//      Pipeline     -  Pointer to a WINBIO_PIPELINE structure associated with 
//                      the biometric unit.
//      RejectDetail -  Pointer to a WINBIO_REJECT_DETAIL value that receives 
//                      additional information about the failure to capture a 
//                      biometric sample.
//
static HRESULT
WINAPI
SensorAdapterFinishCapture(
    __inout PWINBIO_PIPELINE Pipeline,
    __out PWINBIO_REJECT_DETAIL RejectDetail
    )
{
    HRESULT hr = S_OK;
    WINBIO_SENSOR_STATUS sensorStatus = WINBIO_SENSOR_FAILURE;
    WINBIO_CAPTURE_PARAMETERS captureParameters = {0};
    BOOL result = TRUE;
    DWORD bytesReturned = 0;

    // Verify that pointer arguments are not NULL.
    if (!ARGUMENT_PRESENT(Pipeline) ||
        !ARGUMENT_PRESENT(RejectDetail))
    {
        hr = E_POINTER;
        goto cleanup;
    }

    // Retrieve the context from the pipeline.
    PWINBIO_SENSOR_CONTEXT sensorContext = 
             (PWINBIO_SENSOR_CONTEXT)Pipeline->SensorContext;

    // Verify the state of the pipeline.
    if (sensorContext == NULL || 
        Pipeline->SensorHandle == INVALID_HANDLE_VALUE)
    {
        return WINBIO_E_INVALID_DEVICE_STATE;
    }

    // Initialize the RejectDetail argument.
    *RejectDetail = 0;

    // Wait for I/O completion. This sample assumes that the I/O operation was 
    // started using the code example shown in the SensorAdapterStartCapture
    // documentation.
    SetLastError(ERROR_SUCCESS);

    result = GetOverlappedResult(
                Pipeline->SensorHandle,
                &sensorContext->Overlapped,
                &bytesReturned,
                TRUE
                );
    if (!result)
    {
        // There was an I/O error.
        return _AdapterGetHresultFromWin32(GetLastError());
    }

    if (bytesReturned == sizeof (DWORD))
    {
        // The buffer is not large enough.  This can happen if a device needs a 
        // bigger buffer depending on the purpose. Allocate a larger buffer and 
        // force the caller to reissue their I/O request.
        DWORD allocationSize = sensorContext->CaptureBuffer->PayloadSize;

        // Allocate at least the minimum buffer size needed to retrieve the 
        // payload structure.
        if (allocationSize < sizeof(WINBIO_CAPTURE_DATA))
        {
            allocationSize = sizeof(WINBIO_CAPTURE_DATA);
        }

        // Free the old buffer and allocate a new one.
        _AdapterRelease(sensorContext->CaptureBuffer);
        sensorContext->CaptureBuffer = NULL;

        sensorContext->CaptureBuffer = 
            (PWINBIO_CAPTURE_DATA)_AdapterAlloc(allocationSize);
        if (sensorContext->CaptureBuffer == NULL)
        {
            sensorContext->CaptureBufferSize = 0;
            return E_OUTOFMEMORY;
        }
        sensorContext->CaptureBufferSize = allocationSize;
        return WINBIO_E_BAD_CAPTURE;
    }

    // Normalize the status value before sending it back to the biometric service.
    if (sensorContext->CaptureBuffer != NULL &&
        sensorContext->CaptureBufferSize >= sizeof (WINBIO_CAPTURE_DATA))
    {
        switch (sensorContext->CaptureBuffer->SensorStatus)
        {
            case WINBIO_SENSOR_ACCEPT:
                // The capture was acceptable.
                break;

            case WINBIO_SENSOR_REJECT:
                // The capture was not acceptable. Overwrite the WinBioHresult value
                // in case it has not been properly set.
                sensorContext->CaptureBuffer->WinBioHresult = WINBIO_E_BAD_CAPTURE;
                break;

            case WINBIO_SENSOR_BUSY:
                // The device is busy. Reset the WinBioHresult value in case it 
                // has not been properly set.
                sensorContext->CaptureBuffer->WinBioHresult = WINBIO_E_DEVICE_BUSY;
                break;

            case WINBIO_SENSOR_READY:
            case WINBIO_SENSOR_NOT_CALIBRATED:
            case WINBIO_SENSOR_FAILURE:
            default:
                // There has been a device failure. Reset the WinBioHresult value
                // in case it has not been properly set.
                sensorContext->CaptureBuffer->WinBioHresult = WINBIO_E_INVALID_DEVICE_STATE;
                break;
        }

        *RejectDetail = sensorContext->CaptureBuffer->RejectDetail;
        hr = sensorContext->CaptureBuffer->WinBioHresult;
    }
    else
    {
        // The buffer is not large enough or the buffer pointer is NULL.
        hr = WINBIO_E_INVALID_DEVICE_STATE;
    }
    return hr;
}

規格需求

另請參閱

外掛程式函式

SensorAdapterCancel

SensorAdapterExportSensorData

SensorAdapterPushDataToEngine

SensorAdapterStartCapture