GraphicsPathIterator.NextSubpath Metoda

Reference

Definice

Obor názvů:: System.Drawing.Drawing2D

Sestavení:: System.Drawing.Common.dll

Sestavení:: System.Drawing.dll

Balíček:: System.Drawing.Common v8.0.7

Balíček:: System.Drawing.Common v9.0.0-preview.6.24327.6

Důležité

Některé informace platí pro předběžně vydaný produkt, který se může zásadně změnit, než ho výrobce nebo autor vydá. Microsoft neposkytuje žádné záruky, výslovné ani předpokládané, týkající se zde uváděných informací.

Přesune dílčí cestu na další dílčí cestu v zadaném GraphicsPath.

Přetížení

NextSubpath(GraphicsPath, Boolean)	Získá další obrázek (dílčí cestu) z přidružené cesty tohoto GraphicsPathIterator.
NextSubpath(Int32, Int32, Boolean)	Přesune GraphicsPathIterator na další dílčí cestu v cestě. Počáteční index a koncový index další dílčí cesty jsou obsaženy v parametrech [out].

NextSubpath(GraphicsPath, Boolean)

Zdroj:: GraphicsPathIterator.cs

Zdroj:: GraphicsPathIterator.cs

Zdroj:: GraphicsPathIterator.cs

Zdroj:: GraphicsPathIterator.cs

Zdroj:: GraphicsPathIterator.cs

Získá další obrázek (dílčí cestu) z přidružené cesty tohoto GraphicsPathIterator.

public:
 int NextSubpath(System::Drawing::Drawing2D::GraphicsPath ^ path, [Runtime::InteropServices::Out] bool % isClosed);

public int NextSubpath (System.Drawing.Drawing2D.GraphicsPath path, out bool isClosed);

member this.NextSubpath : System.Drawing.Drawing2D.GraphicsPath * bool -> int

Public Function NextSubpath (path As GraphicsPath, ByRef isClosed As Boolean) As Integer

Parametry

path: GraphicsPath

GraphicsPath, která má datové body nastavené tak, aby odpovídaly datovým bodům načteného obrázku (dílčí cesty) pro tento iterátor.

isClosed: Boolean

[ven] Určuje, zda je aktuální dílčí cesta uzavřena. Je true, pokud je obrázek zavřený, jinak je false.

Návraty

Int32

Početdatových Pokud nejsou k dispozici žádné další údaje, které by bylo možné načíst, vrátí se nula.

Příklady

Následující příklad je navržený pro použití s Windows Forms a vyžaduje PaintEventArgse, objekt události OnPaint. Kód provede následující akce:

Vytvoří objekt GraphicsPath.
Přidá tři čáry, obdélník, tři tečky a dvě značky.
Zobrazí seznam hodnot všech bodů cesty na levou stranu obrazovky.
Vytvoří objekt GraphicsPathIterator.
Vytvoří objekt GraphicsPathmyPathSectionpro příjem zkopírovaných bodů.
Volá metodu NextSubpath, která iteruje třetí dílčí cestu (obrázek) a zkopíruje všechny body obsažené v této dílčí cestě do cesty myPathSection a také vrátí počet bodů zkopírovaných do subpathPoints.
Zobrazí číslo dílčí cesty a počet bodů, které obsahuje na pravé straně obrazovky.

void NextSubpathExample2( PaintEventArgs^ e )
{
   // Create a graphics path.
   GraphicsPath^ myPath = gcnew GraphicsPath;

   // Set up primitives to add to myPath.
   array<Point>^ myPoints = {Point(20,20),Point(120,120),Point(20,120),Point(20,20)};
   Rectangle myRect = Rectangle(120,120,100,100);

   // Add 3 lines, a rectangle, an ellipse, and 2 markers.
   myPath->AddLines( myPoints );
   myPath->SetMarkers();
   myPath->AddRectangle( myRect );
   myPath->SetMarkers();
   myPath->AddEllipse( 220, 220, 100, 100 );

   // Get the total number of points for the path,
   // and the arrays of the points and types.
   int myPathPointCount = myPath->PointCount;
   array<PointF>^myPathPoints = myPath->PathPoints;
   array<Byte>^myPathTypes = myPath->PathTypes;

   // Set up variables for listing all of the path's
   // points to the screen.
   int i;
   float j = 20;
   System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",8 );
   SolidBrush^ myBrush = gcnew SolidBrush( Color::Black );

   // List the values of all the path points and types to the screen.
   for ( i = 0; i < myPathPointCount; i++ )
   {
      e->Graphics->DrawString( myPathPoints[ i ].X + ", " + myPathPoints[ i ].Y + ", " + myPathTypes[ i ], myFont, myBrush, 20, j );
      j += 20;
   }

   // Create a GraphicsPathIterator for myPath.
   GraphicsPathIterator^ myPathIterator = gcnew GraphicsPathIterator( myPath );

   // Rewind the iterator.
   myPathIterator->Rewind();

   // Create the GraphicsPath section.
   GraphicsPath^ myPathSection = gcnew GraphicsPath;

   // Iterate to the 3rd subpath and list the number of points therein
   // to the screen.
   int subpathPoints;
   bool IsClosed2;

   // Iterate to the third subpath.
   subpathPoints = myPathIterator->NextSubpath( myPathSection, IsClosed2 );
   subpathPoints = myPathIterator->NextSubpath( myPathSection, IsClosed2 );
   subpathPoints = myPathIterator->NextSubpath( myPathSection, IsClosed2 );

   // Write the number of subpath points to the screen.
   e->Graphics->DrawString( String::Format( "Subpath: 3   Num Points: {0}", subpathPoints ), myFont, myBrush, 200, 20 );
}

public void NextSubpathExample2(PaintEventArgs e)
{
         
    // Create a graphics path.
    GraphicsPath myPath = new GraphicsPath();
         
    // Set up primitives to add to myPath.
    Point[] myPoints = {new Point(20, 20), new Point(120, 120), 
        new Point(20, 120),new Point(20, 20) }; 
    Rectangle myRect = new Rectangle(120, 120, 100, 100);
         
    // Add 3 lines, a rectangle, an ellipse, and 2 markers.
    myPath.AddLines(myPoints);
    myPath.SetMarkers();
    myPath.AddRectangle(myRect);
    myPath.SetMarkers();
    myPath.AddEllipse(220, 220, 100, 100);
         
    // Get the total number of points for the path,
         
    // and the arrays of the points and types.
    int myPathPointCount = myPath.PointCount;
    PointF[] myPathPoints = myPath.PathPoints;
    byte[] myPathTypes = myPath.PathTypes;
         
    // Set up variables for listing all of the path's
         
    // points to the screen.
    int i;
    float j = 20;
    Font myFont = new Font("Arial", 8);
    SolidBrush myBrush = new SolidBrush(Color.Black);
         
    // List the values of all the path points and types to the screen.
    for(i=0; i<myPathPointCount; i++)
    {
        e.Graphics.DrawString(myPathPoints[i].X.ToString()+
            ", " + myPathPoints[i].Y.ToString() + ", " +
            myPathTypes[i].ToString(),
            myFont,
            myBrush,
            20,
            j);
        j+=20;
    }
         
    // Create a GraphicsPathIterator for myPath.
    GraphicsPathIterator myPathIterator = new
        GraphicsPathIterator(myPath);
         
    // Rewind the iterator.
    myPathIterator.Rewind();
         
    // Create the GraphicsPath section.
    GraphicsPath myPathSection = new GraphicsPath();
         
    // Iterate to the 3rd subpath and list the number of points therein
         
    // to the screen.
    int subpathPoints;
    bool IsClosed2;
         
    // Iterate to the third subpath.
    subpathPoints = myPathIterator.NextSubpath(
        myPathSection, out IsClosed2);
    subpathPoints = myPathIterator.NextSubpath(
        myPathSection, out IsClosed2);
    subpathPoints = myPathIterator.NextSubpath(
        myPathSection, out IsClosed2);
         
    // Write the number of subpath points to the screen.
    e.Graphics.DrawString("Subpath: 3"  +
        "   Num Points: " +
        subpathPoints.ToString(),
        myFont,
        myBrush,
        200,
        20);
}

Public Sub NextSubpathExample2(ByVal e As PaintEventArgs)

    ' Create a graphics path.
    Dim myPath As New GraphicsPath

    ' Set up primitives to add to myPath.
    Dim myPoints As Point() = {New Point(20, 20), _
        New Point(120, 120), New Point(20, 120), New Point(20, 20)}
    Dim myRect As New Rectangle(120, 120, 100, 100)

    ' Add 3 lines, a rectangle, an ellipse, and 2 markers.
    myPath.AddLines(myPoints)
    myPath.SetMarkers()
    myPath.AddRectangle(myRect)
    myPath.SetMarkers()
    myPath.AddEllipse(220, 220, 100, 100)

    ' Get the total number of points for the path,

    ' and the arrays of the points and types.
    Dim myPathPointCount As Integer = myPath.PointCount
    Dim myPathPoints As PointF() = myPath.PathPoints
    Dim myPathTypes As Byte() = myPath.PathTypes

    ' Set up variables for drawing the array
    ' of points to the screen.
    Dim i As Integer
    Dim j As Single = 20
    Dim myFont As New Font("Arial", 8)
    Dim myBrush As New SolidBrush(Color.Black)

    ' Draw the set of path points and types to the screen.
    For i = 0 To myPathPointCount - 1
        e.Graphics.DrawString(myPathPoints(i).X.ToString() + _
            ", " + myPathPoints(i).Y.ToString() + ", " + _
            myPathTypes(i).ToString(), myFont, myBrush, 20, j)
        j += 20
    Next i

    ' Create a GraphicsPathIterator for myPath.
    Dim myPathIterator As New GraphicsPathIterator(myPath)

    ' Rewind the iterator.
    myPathIterator.Rewind()

    ' Create the GraphicsPath section.
    Dim myPathSection As New GraphicsPath

    ' Draw the 3rd subpath and the number of points therein
    ' to the screen.
    Dim subpathPoints As Integer
    Dim IsClosed2 As Boolean

    ' Iterate to the third subpath.
    subpathPoints = myPathIterator.NextSubpath(myPathSection, _
        IsClosed2)
    subpathPoints = myPathIterator.NextSubpath(myPathSection, _
        IsClosed2)
    subpathPoints = myPathIterator.NextSubpath(myPathSection, _
        IsClosed2)

    ' Write the number of subpath points to the screen.
    e.Graphics.DrawString("Subpath: 3" + "   Num Points: " + _
    subpathPoints.ToString(), myFont, myBrush, 200, 20)
End Sub

Platí pro

NextSubpath(Int32, Int32, Boolean)

Zdroj:: GraphicsPathIterator.cs

Zdroj:: GraphicsPathIterator.cs

Zdroj:: GraphicsPathIterator.cs

Zdroj:: GraphicsPathIterator.cs

Zdroj:: GraphicsPathIterator.cs

Přesune GraphicsPathIterator na další dílčí cestu v cestě. Počáteční index a koncový index další dílčí cesty jsou obsaženy v parametrech [out].

public:
 int NextSubpath([Runtime::InteropServices::Out] int % startIndex, [Runtime::InteropServices::Out] int % endIndex, [Runtime::InteropServices::Out] bool % isClosed);

public int NextSubpath (out int startIndex, out int endIndex, out bool isClosed);

member this.NextSubpath : int * int * bool -> int

Public Function NextSubpath (ByRef startIndex As Integer, ByRef endIndex As Integer, ByRef isClosed As Boolean) As Integer

Parametry

startIndex: Int32

[ven] Přijme počáteční index další dílčí cesty.

endIndex: Int32

[ven] Přijme koncový index další dílčí cesty.

isClosed: Boolean

[ven] Určuje, zda je dílčí cesta uzavřena.

Návraty

Int32

Počet dílčích cest v objektu GraphicsPath.

Příklady

Následující příklad je navržený pro použití s Windows Forms a vyžaduje PaintEventArgse, objekt události OnPaint. Kód provede následující akce:

Vytvoří objekt GraphicsPath.
Přidá tři čáry, obdélník a tři tečky.
Nakreslí hodnoty pole bodů na obrazovku.
Vytvoří objekt GraphicsPathIterator.
Volá metodu NextSubpath.
Pomocí hodnot vrácených z iterativních volání NextSubpath nakreslete počáteční a zarážkové hodnoty pro každou dílčí cestu na obrazovku.
Nakreslí hodnotu celkového počtu dílčích cest na obrazovku.

private:
   void NextSubpathExample( PaintEventArgs^ e )
   {
      // Create the GraphicsPath.
      GraphicsPath^ myPath = gcnew GraphicsPath;
      array<Point>^ myPoints = {Point(20,20),Point(120,120),Point(20,120),Point(20,20)};
      Rectangle myRect = Rectangle(120,120,100,100);

      // Add 3 lines, a rectangle, an ellipse, and 2 markers.
      myPath->AddLines( myPoints );
      myPath->AddRectangle( myRect );
      myPath->AddEllipse( 220, 220, 100, 100 );

      // Get the total number of points for the path,
      // and the arrays of the points and types.
      int myPathPointCount = myPath->PointCount;
      array<PointF>^myPathPoints = myPath->PathPoints;
      array<Byte>^myPathTypes = myPath->PathTypes;

      // Set up variables for drawing the array of
      // points to the screen.
      int i;
      float j = 20;
      System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",8 );
      SolidBrush^ myBrush = gcnew SolidBrush( Color::Black );

      // Draw the set of path points and types to the screen.
      for ( i = 0; i < myPathPointCount; i++ )
      {
         e->Graphics->DrawString( myPathPoints[ i ].X + ", " + myPathPoints[ i ].Y + ", " + myPathTypes[ i ], myFont, myBrush, 20, j );
         j += 20;
      }

      // Create a GraphicsPathIterator.
      GraphicsPathIterator^ myPathIterator = gcnew GraphicsPathIterator( myPath );
      int myStartIndex;
      int myEndIndex;
      bool myIsClosed;

      // get the number of Subpaths.
      int numSubpaths = myPathIterator->NextSubpath( myPath, myIsClosed );
      numSubpaths -= 1;

      // Rewind the Iterator.
      myPathIterator->Rewind();

      // List the Subpaths to the screen.
      j = 20;
      for ( i = 0; i < numSubpaths; i++ )
      {
         myPathIterator->NextSubpath( myStartIndex, myEndIndex, myIsClosed );
         String^ s = String::Format( "Subpath {0}:  Start: {1}", i, myStartIndex );
         s = s + String::Format( "  End: {0}  IsClosed: {1}", myEndIndex, myIsClosed );
         e->Graphics->DrawString( s, myFont, myBrush, 200, j );
         j += 20;
      }

      // Draw the total number of Subpaths to the screen.
      j += 20;
      e->Graphics->DrawString( String::Format( "Number Subpaths = {0}", numSubpaths ), myFont, myBrush, 200, j );
   }

private void NextSubpathExample(PaintEventArgs e)
{
             
    // Create the GraphicsPath.
    GraphicsPath myPath = new GraphicsPath();
    Point[] myPoints = {new Point(20, 20), new Point(120, 120), 
        new Point(20, 120),new Point(20, 20) }; 
    Rectangle myRect = new Rectangle(120, 120, 100, 100);
             
    // Add 3 lines, a rectangle, an ellipse, and 2 markers.
    myPath.AddLines(myPoints);
    myPath.AddRectangle(myRect);
    myPath.AddEllipse(220, 220, 100, 100);
             
    // Get the total number of points for the path,
             
    // and the arrays of the points and types.
    int myPathPointCount = myPath.PointCount;
    PointF[] myPathPoints = myPath.PathPoints;
    byte[] myPathTypes = myPath.PathTypes;
             
    // Set up variables for drawing the array of
             
    // points to the screen.
    int i;
    float j = 20;
    Font myFont = new Font("Arial", 8);
    SolidBrush myBrush = new SolidBrush(Color.Black);
             
    // Draw the set of path points and types to the screen.
    for(i=0; i < myPathPointCount; i++)
    {
        e.Graphics.DrawString(myPathPoints[i].X.ToString()+
            ", " + myPathPoints[i].Y.ToString() + ", " +
            myPathTypes[i].ToString(),
            myFont,
            myBrush,
            20,
            j);
        j+=20;
    }
             
    // Create a GraphicsPathIterator.
    GraphicsPathIterator myPathIterator = new
        GraphicsPathIterator(myPath);
    int myStartIndex;
    int myEndIndex;
    bool myIsClosed;
             
    // get the number of Subpaths.
    int numSubpaths = myPathIterator.NextSubpath(myPath,
        out myIsClosed);
    numSubpaths -= 1;
             
    // Rewind the Iterator.
    myPathIterator.Rewind();
             
    // List the Subpaths to the screen.
    j=20;
    for(i=0;i<numSubpaths;i++)
    {
        myPathIterator.NextSubpath(out myStartIndex,
            out myEndIndex,
            out myIsClosed);
        e.Graphics.DrawString("Subpath " + i.ToString() +
            ":  Start: " + myStartIndex.ToString()+
            "  End: " + myEndIndex.ToString() +
            "  IsClosed: " + myIsClosed.ToString(),
            myFont,
            myBrush,
            200,
            j);
        j += 20;
    }
             
    // Draw the total number of Subpaths to the screen.
    j += 20;
    e.Graphics.DrawString("Number Subpaths = " +
        numSubpaths.ToString(),
        myFont,
        myBrush,
        200,
        j);
}

Public Sub NextSubpathExample(ByVal e As PaintEventArgs)

    ' Create the GraphicsPath.
    Dim myPath As New GraphicsPath
    Dim myPoints As Point() = {New Point(20, 20), _
    New Point(120, 120), New Point(20, 120), New Point(20, 20)}
    Dim myRect As New Rectangle(120, 120, 100, 100)

    ' Add 3 lines, a rectangle, an ellipse, and 2 markers.
    myPath.AddLines(myPoints)
    myPath.AddRectangle(myRect)
    myPath.AddEllipse(220, 220, 100, 100)

    ' Get the total number of points for the path,
    ' and the arrays of the points and types.
    Dim myPathPointCount As Integer = myPath.PointCount
    Dim myPathPoints As PointF() = myPath.PathPoints
    Dim myPathTypes As Byte() = myPath.PathTypes

    ' Set up variables for drawing the array of points to the screen.
    Dim i As Integer
    Dim j As Single = 20
    Dim myFont As New Font("Arial", 8)
    Dim myBrush As New SolidBrush(Color.Black)

    ' Draw the set of path points and types to the screen.
    For i = 0 To myPathPointCount - 1
        e.Graphics.DrawString(myPathPoints(i).X.ToString() + ", " + _
        myPathPoints(i).Y.ToString() + ", " + _
        myPathTypes(i).ToString(), myFont, myBrush, 20, j)
        j += 20
    Next i

    ' Create a GraphicsPathIterator.
    Dim myPathIterator As New GraphicsPathIterator(myPath)
    Dim myStartIndex As Integer
    Dim myEndIndex As Integer
    Dim myIsClosed As Boolean

    ' get the number of Subpaths.
    Dim numSubpaths As Integer = myPathIterator.NextSubpath(myPath, _
        myIsClosed)
    numSubpaths -= 1

    ' Rewind the Iterator.
    myPathIterator.Rewind()

    ' List the Subpaths to the screen.
    j = 20
    For i = 0 To numSubpaths - 1
        myPathIterator.NextSubpath(myStartIndex, myEndIndex, _
        myIsClosed)
        e.Graphics.DrawString("Subpath " + i.ToString() + _
            ":  Start: " + myStartIndex.ToString() + "  End: " + _
            myEndIndex.ToString() + "  IsClosed: " + _
            myIsClosed.ToString(), myFont, myBrush, 200, j)
        j += 20
    Next i

    ' Draw the total number of Subpaths to the screen.
    j += 20
    e.Graphics.DrawString("Number Subpaths = " + _
        numSubpaths.ToString(), myFont, myBrush, 200, j)
End Sub

Platí pro

Sdílet prostřednictvím

GraphicsPathIterator.NextSubpath Metoda

Definice

Přetížení

NextSubpath(GraphicsPath, Boolean)

Parametry

Návraty

Příklady

Platí pro

NextSubpath(Int32, Int32, Boolean)

Parametry

Návraty

Příklady

Platí pro

Další materiály