RichTextBox.LoadFile Metoda

public:
 void LoadFile(System::String ^ path);

public void LoadFile (string path);

member this.LoadFile : string -> unit

Public Sub LoadFile (path As String)

Parametry

Výjimky

Příklady

Následující příklad kódu otevře soubor RTF do RichTextBox ovládacího prvku. V příkladu OpenFileDialog se třída používá k zobrazení dialogového okna s žádostí o soubor od uživatele. Kód pak tento soubor načte za předpokladu, že se jedná o soubor dokumentu ve formátu RTF. Pokud soubor není, ukázkový kód vyvolá výjimku. Tento příklad vyžaduje, aby byl kód umístěn ve Form třídě, která má RichTextBox ovládací prvek s názvem richTextBox1.

public:
   void LoadMyFile()
   {
      // Create an OpenFileDialog to request a file to open.
      OpenFileDialog^ openFile1 = gcnew OpenFileDialog;
      
      // Initialize the OpenFileDialog to look for RTF files.
      openFile1->DefaultExt = "*.rtf";
      openFile1->Filter = "RTF Files|*.rtf";
      
      // Determine whether the user selected a file from the OpenFileDialog.
      if ( openFile1->ShowDialog() == System::Windows::Forms::DialogResult::OK &&
         openFile1->FileName->Length > 0 )
      {
         // Load the contents of the file into the RichTextBox.
         richTextBox1->LoadFile( openFile1->FileName );
      }
   }

public void LoadMyFile()
{
   // Create an OpenFileDialog to request a file to open.
   OpenFileDialog openFile1 = new OpenFileDialog();

   // Initialize the OpenFileDialog to look for RTF files.
   openFile1.DefaultExt = "*.rtf";
   openFile1.Filter = "RTF Files|*.rtf";

   // Determine whether the user selected a file from the OpenFileDialog.
   if(openFile1.ShowDialog() == System.Windows.Forms.DialogResult.OK &&
      openFile1.FileName.Length > 0) 
   {
      // Load the contents of the file into the RichTextBox.
      richTextBox1.LoadFile(openFile1.FileName);
   }
}

Public Sub LoadMyFile()
    ' Create an OpenFileDialog to request a file to open.
    Dim openFile1 As New OpenFileDialog()
    
    ' Initialize the OpenFileDialog to look for RTF files.
    openFile1.DefaultExt = "*.rtf"
    openFile1.Filter = "RTF Files|*.rtf"
    
    ' Determine whether the user selected a file from the OpenFileDialog.
    If (openFile1.ShowDialog() = System.Windows.Forms.DialogResult.OK) _
        And (openFile1.FileName.Length > 0) Then
        
        ' Load the contents of the file into the RichTextBox.
        richTextBox1.LoadFile(openFile1.FileName)
    End If
End Sub

Poznámky

Při načítání souboru metodou LoadFile nahradí obsah načítaného souboru celý obsah RichTextBox ovládacího prvku. To způsobí změnu hodnot Text vlastností a Rtf . Tuto metodu můžete použít k načtení dříve vytvořeného textu nebo dokumentu RTF do ovládacího prvku pro manipulaci. Pokud chcete soubor uložit, můžete použít metodu SaveFile .

Viz také

• SaveFile(String)

public:
 void LoadFile(System::IO::Stream ^ data, System::Windows::Forms::RichTextBoxStreamType fileType);

public void LoadFile (System.IO.Stream data, System.Windows.Forms.RichTextBoxStreamType fileType);

member this.LoadFile : System.IO.Stream * System.Windows.Forms.RichTextBoxStreamType -> unit

Public Sub LoadFile (data As Stream, fileType As RichTextBoxStreamType)

Parametry

Výjimky

Příklady

Následující příklad kódu ukazuje použití SaveFile metod a LoadFile s datovými proudy. Ukazuje také použití FileDialog.FileNamečlenů , FileDialog.DefaultExt, SaveFileDialog.CreatePrompta SaveFileDialog.OverwritePrompt .

Toto je kompletní příklad, který je připravený ke spuštění, když ho zkopírujete do projektu.

using namespace System;
using namespace System::Drawing;
using namespace System::IO;
using namespace System::Windows::Forms;

public ref class Form1: public Form
{
public private:
   RichTextBox^ RichTextBox1;
   Button^ Button1;
   RichTextBox^ RichTextBox2;
   Button^ Button2;
   SaveFileDialog^ SaveFileDialog1;

public:
   Form1()
      : Form()
   {
      userInput = gcnew MemoryStream;
      this->RichTextBox1 = gcnew RichTextBox;
      this->Button1 = gcnew Button;
      this->RichTextBox2 = gcnew RichTextBox;
      this->Button2 = gcnew Button;
      this->SaveFileDialog1 = gcnew SaveFileDialog;
      this->SuspendLayout();
      this->RichTextBox1->Location = Point( 24, 64 );
      this->RichTextBox1->Name = "RichTextBox1";
      this->RichTextBox1->TabIndex = 0;
      this->RichTextBox1->Text = "Type something here.";
      this->Button1->Location = Point( 96, 16 );
      this->Button1->Name = "Button1";
      this->Button1->Size = Size( 96, 24 );
      this->Button1->TabIndex = 1;
      this->Button1->Text = "Save To Stream";
      this->Button1->Click += 
          gcnew EventHandler( this, &Form1::Button1_Click );
      this->RichTextBox2->Location = Point( 152, 64 );
      this->RichTextBox2->Name = "RichTextBox2";
      this->RichTextBox2->TabIndex = 3;
      this->RichTextBox2->Text = "It will be added to the stream "
      "and appear here.";
      this->Button2->Location = Point( 104, 200 );
      this->Button2->Name = "Button2";
      this->Button2->Size = Size( 88, 32 );
      this->Button2->TabIndex = 4;
      this->Button2->Text = "Save Stream To File";
      this->Button2->Click += 
          gcnew EventHandler( this, &Form1::Button2_Click );
      this->ClientSize = Size( 292, 266 );
      this->Controls->Add( this->Button2 );
      this->Controls->Add( this->RichTextBox2 );
      this->Controls->Add( this->Button1 );
      this->Controls->Add( this->RichTextBox1 );
      this->Name = "Form1";
      this->Text = "Form1";
      this->ResumeLayout( false );
   }

   // Declare a new memory stream.
   MemoryStream^ userInput;

private:

   // Save the content of RichTextBox1 to the memory stream, 
   // appending a LineFeed character.  
   void Button1_Click( Object^ /*sender*/, EventArgs^ /*e*/ )
   {
      RichTextBox1->SaveFile( userInput, RichTextBoxStreamType::PlainText );
      userInput->WriteByte( 13 );
      
      // Display the entire contents of the stream,
      // by setting its position to 0, to RichTextBox2.
      userInput->Position = 0;
      RichTextBox2->LoadFile( userInput, RichTextBoxStreamType::PlainText );
   }


   // Shows the use of a SaveFileDialog to save a MemoryStream to a file.
   void Button2_Click( Object^ /*sender*/, EventArgs^ /*e*/ )
   {
      
      // Set the properties on SaveFileDialog1 so the user is 
      // prompted to create the file if it doesn't exist 
      // or overwrite the file if it does exist.
      SaveFileDialog1->CreatePrompt = true;
      SaveFileDialog1->OverwritePrompt = true;
      
      // Set the file name to myText.txt, set the type filter
      // to text files, and set the initial directory to the
      // MyDocuments folder.
      SaveFileDialog1->FileName = "myText";
      // DefaultExt is only used when "All files" is selected from 
      // the filter box and no extension is specified by the user.
      SaveFileDialog1->DefaultExt = "txt";
      SaveFileDialog1->Filter = "Text files (*.txt)|*.txt|All files (*.*)|*.*";
      SaveFileDialog1->InitialDirectory = 
          Environment->GetFolderPath(Environment::SpecialFolder::MyDocuments);
      
      // Call ShowDialog and check for a return value of DialogResult.OK,
      // which indicates that the file was saved. 
      DialogResult result = SaveFileDialog1->ShowDialog();
      Stream^ fileStream;
      if ( result == DialogResult::OK )
      {
         fileStream = SaveFileDialog1->OpenFile();
         userInput->Position = 0;
         userInput->WriteTo( fileStream );
         fileStream->Close();
      }
   }
};

int main()
{
   Application::Run( gcnew Form1 );
}

using System;
using System.Drawing;
using System.IO;
using System.Windows.Forms;

public partial class Form1: Form
{
    internal RichTextBox RichTextBox1;
    internal Button Button1;
    internal RichTextBox RichTextBox2;
    internal Button Button2;
    internal SaveFileDialog SaveFileDialog1;

    public Form1() : base()
    {   
        this.RichTextBox1 = new RichTextBox();
        this.Button1 = new Button();
        this.RichTextBox2 = new RichTextBox();
        this.Button2 = new Button();
        this.SaveFileDialog1 = new SaveFileDialog();
        this.SuspendLayout();
        this.RichTextBox1.Location = new Point(24, 64);
        this.RichTextBox1.Name = "RichTextBox1";
        this.RichTextBox1.TabIndex = 0;
        this.RichTextBox1.Text = "Type something here.";
        this.Button1.Location = new Point(96, 16);
        this.Button1.Name = "Button1";
        this.Button1.Size = new Size(96, 24);
        this.Button1.TabIndex = 1;
        this.Button1.Text = "Save To Stream";
        this.Button1.Click += new EventHandler(Button1_Click);
        this.RichTextBox2.Location = new Point(152, 64);
        this.RichTextBox2.Name = "RichTextBox2";
        this.RichTextBox2.TabIndex = 3;
        this.RichTextBox2.Text = 
            "It will be added to the stream and appear here.";
        this.Button2.Location = new Point(104, 200);
        this.Button2.Name = "Button2";
        this.Button2.Size = new Size(88, 32);
        this.Button2.TabIndex = 4;
        this.Button2.Text = "Save Stream To File";
        this.Button2.Click += new EventHandler(Button2_Click);
        this.ClientSize = new Size(292, 266);
        this.Controls.Add(this.Button2);
        this.Controls.Add(this.RichTextBox2);
        this.Controls.Add(this.Button1);
        this.Controls.Add(this.RichTextBox1);
        this.Name = "Form1";
        this.Text = "Form1";
        this.ResumeLayout(false);
    }

    public static void Main()
    {
        Application.Run(new Form1());
    }

    // Declare a new memory stream.
    MemoryStream userInput = new MemoryStream();

    // Save the content of RichTextBox1 to the memory stream, 
    // appending a LineFeed character.  
    private void Button1_Click(Object sender, EventArgs e)
    {
        RichTextBox1.SaveFile(userInput, RichTextBoxStreamType.PlainText);
        userInput.WriteByte(13);

        // Display the entire contents of the stream,
        // by setting its position to 0, to RichTextBox2.
        userInput.Position = 0;
        RichTextBox2.LoadFile(userInput, RichTextBoxStreamType.PlainText);
    }

    // Shows the use of a SaveFileDialog to save a MemoryStream to a file.
    private void Button2_Click(Object sender, EventArgs e)
    {
        // Set the properties on SaveFileDialog1 so the user is 
        // prompted to create the file if it doesn't exist 
        // or overwrite the file if it does exist.
        SaveFileDialog1.CreatePrompt = true;
        SaveFileDialog1.OverwritePrompt = true;

        // Set the file name to myText.txt, set the type filter
        // to text files, and set the initial directory to the 
        // MyDocuments folder.
        SaveFileDialog1.FileName = "myText";
        // DefaultExt is only used when "All files" is selected from 
        // the filter box and no extension is specified by the user.
        SaveFileDialog1.DefaultExt = "txt";
        SaveFileDialog1.Filter = 
            "Text files (*.txt)|*.txt|All files (*.*)|*.*";
        SaveFileDialog1.InitialDirectory = 
            Environment.GetFolderPath(Environment.SpecialFolder.MyDocuments);

        // Call ShowDialog and check for a return value of DialogResult.OK,
        // which indicates that the file was saved. 
        DialogResult result = SaveFileDialog1.ShowDialog();
        Stream fileStream;

        if (result == DialogResult.OK)
        {
            // Open the file, copy the contents of memoryStream to fileStream,
            // and close fileStream. Set the memoryStream.Position value to 0 
            // to copy the entire stream. 
            fileStream = SaveFileDialog1.OpenFile();
            userInput.Position = 0;
            userInput.WriteTo(fileStream);
            fileStream.Close();
        }
    }
}

Imports System.Drawing
Imports System.IO
Imports System.Windows.Forms

Partial Public Class Form1
    Inherits Form

    Friend WithEvents RichTextBox1 As RichTextBox
    Friend WithEvents Button1 As Button
    Friend WithEvents RichTextBox2 As RichTextBox
    Friend WithEvents Button2 As Button
    Friend WithEvents SaveFileDialog1 As SaveFileDialog

    Public Sub New()
        MyBase.New()
        Me.RichTextBox1 = New RichTextBox
        Me.Button1 = New Button
        Me.RichTextBox2 = New RichTextBox
        Me.Button2 = New Button
        Me.SaveFileDialog1 = New SaveFileDialog
        Me.SuspendLayout()
        Me.RichTextBox1.Location = New Point(24, 64)
        Me.RichTextBox1.Name = "RichTextBox1"
        Me.RichTextBox1.TabIndex = 0
        Me.RichTextBox1.Text = "Type something here."
        Me.Button1.Location = New Point(96, 16)
        Me.Button1.Name = "Button1"
        Me.Button1.Size = New Size(96, 24)
        Me.Button1.TabIndex = 1
        Me.Button1.Text = "Save To Stream"
        Me.RichTextBox2.Location = New Point(152, 64)
        Me.RichTextBox2.Name = "RichTextBox2"
        Me.RichTextBox2.TabIndex = 3
        Me.RichTextBox2.Text = "It will be added to the stream and appear here."
        Me.Button2.Location = New Point(104, 200)
        Me.Button2.Name = "Button2"
        Me.Button2.Size = New Size(88, 32)
        Me.Button2.TabIndex = 4
        Me.Button2.Text = "Save Stream To File"
        Me.ClientSize = New Size(292, 266)
        Me.Controls.Add(Me.Button2)
        Me.Controls.Add(Me.RichTextBox2)
        Me.Controls.Add(Me.Button1)
        Me.Controls.Add(Me.RichTextBox1)
        Me.Name = "Form1"
        Me.Text = "Form1"
        Me.ResumeLayout(False)

    End Sub

    Public Shared Sub Main()
        Application.Run(New Form1)
    End Sub

    ' Declare a new memory stream.
    Dim userInput As New MemoryStream

    ' Save the content of RichTextBox1 to the memory stream, appending
    'a LineFeed character.  
    Private Sub Button1_Click(ByVal sender As Object, _
        ByVal e As EventArgs) Handles Button1.Click
        RichTextBox1.SaveFile(userInput, RichTextBoxStreamType.PlainText)
        userInput.WriteByte(13)

        ' Display the entire contents of the stream,
        ' by setting its position to 0, to RichTextBox2.
        userInput.Position = 0
        RichTextBox2.LoadFile(userInput, RichTextBoxStreamType.PlainText)
    End Sub

    ' Shows the use of a SaveFileDialog to save a MemoryStream to a file.
    Private Sub Button2_Click(ByVal sender As Object, _
        ByVal e As EventArgs) Handles Button2.Click

        ' Set the properties on SaveFileDialog1 so the user is 
        ' prompted to create the file if it doesn't exist 
        ' or overwrite the file if it does exist.
        SaveFileDialog1.CreatePrompt = True
        SaveFileDialog1.OverwritePrompt = True

        ' Set the file name to myText.txt, set the type filter
        ' to text files, and set the initial directory to the 
        ' MyDocuments folder.
        SaveFileDialog1.FileName = "myText"
        ' DefaultExt is only used when "All files" is selected from 
        ' the filter box and no extension is specified by the user.
        SaveFileDialog1.DefaultExt = "txt"
        SaveFileDialog1.Filter = "Text files (*.txt)|*.txt|All files (*.*)|*.*"
        SaveFileDialog1.InitialDirectory = _
            Environment.GetFolderPath(Environment.SpecialFolder.MyDocuments)

        ' Call ShowDialog and check for a return value of DialogResult.OK,
        ' which indicates that the file was saved. 
        Dim result As DialogResult = SaveFileDialog1.ShowDialog()
        Dim fileStream As Stream

        If (result = DialogResult.OK) Then
            ' Open the file, copy the contents of memoryStream to fileStream,
            ' and close fileStream. Set the memoryStream.Position value to 0 to 
            ' copy the entire stream. 
            fileStream = SaveFileDialog1.OpenFile()
            userInput.Position = 0
            userInput.WriteTo(fileStream)
            fileStream.Close()
        End If
    End Sub

End Class

Poznámky

Tuto verzi LoadFile metody můžete použít k načtení RichTextBox s daty z existujícího datového proudu. Data načtená do ovládacího prvku nahradí celý obsah RichTextBox ovládacího prvku. To způsobí změnu hodnot Text vlastností a Rtf . Tuto metodu můžete použít k načtení souboru, který byl dříve otevřen do datového proudu, do ovládacího prvku pro manipulaci. Pokud chcete uložit obsah ovládacího prvku zpět do datového proudu, můžete použít metodu SaveFile , která přijímá Stream objekt jako parametr.

Tato verze LoadFile metody také umožňuje určit typ dat, který se načítá do ovládacího prvku. Tato funkce umožňuje do ovládacího prvku použít datové proudy, které obsahují jiná data než dokumenty ve formátu RTF (Rich Text Format).

Viz také

• SaveFile(String)
• Stream
• RichTextBoxStreamType

public:
 void LoadFile(System::String ^ path, System::Windows::Forms::RichTextBoxStreamType fileType);

public void LoadFile (string path, System.Windows.Forms.RichTextBoxStreamType fileType);

member this.LoadFile : string * System.Windows.Forms.RichTextBoxStreamType -> unit

Public Sub LoadFile (path As String, fileType As RichTextBoxStreamType)

Parametry

Výjimky

Příklady

Následující příklad kódu otevře textový soubor do RichTextBox ovládacího prvku. V příkladu OpenFileDialog se třída používá k zobrazení dialogového okna s žádostí o soubor od uživatele. Kód pak tento soubor načte do RichTextBox ovládacího prvku . Příklad používá tuto verzi LoadFile metody k určení, že soubor má být otevřen jako textový soubor ASCII místo standardní formát RTF. Tento příklad vyžaduje, aby byl kód umístěn ve Form třídě, která má RichTextBox ovládací prvek s názvem richTextBox1.

public:
   void LoadMyFile()
   {
      // Create an OpenFileDialog to request a file to open.
      OpenFileDialog^ openFile1 = gcnew OpenFileDialog;
      
      // Initialize the OpenFileDialog to look for RTF files.
      openFile1->DefaultExt = "*.rtf";
      openFile1->Filter = "RTF Files|*.rtf";
      
      // Determine whether the user selected a file from the OpenFileDialog.
      if ( openFile1->ShowDialog() == System::Windows::Forms::DialogResult::OK &&
         openFile1->FileName->Length > 0 )
      {
         // Load the contents of the file into the RichTextBox.
         richTextBox1->LoadFile( openFile1->FileName, RichTextBoxStreamType::PlainText );
      }
   }

public void LoadMyFile()
{
   // Create an OpenFileDialog to request a file to open.
   OpenFileDialog openFile1 = new OpenFileDialog();

   // Initialize the OpenFileDialog to look for RTF files.
   openFile1.DefaultExt = "*.rtf";
   openFile1.Filter = "RTF Files|*.rtf";

   // Determine whether the user selected a file from the OpenFileDialog.
   if(openFile1.ShowDialog() == System.Windows.Forms.DialogResult.OK &&
      openFile1.FileName.Length > 0) 
   {
      // Load the contents of the file into the RichTextBox.
      richTextBox1.LoadFile(openFile1.FileName, RichTextBoxStreamType.PlainText);
   }
}

Public Sub LoadMyFile()
    ' Create an OpenFileDialog to request a file to open.
    Dim openFile1 As New OpenFileDialog()
    
    ' Initialize the OpenFileDialog to look for RTF files.
    openFile1.DefaultExt = "*.rtf"
    openFile1.Filter = "RTF Files|*.rtf"
    
    ' Determine whether the user selected a file from the OpenFileDialog.
    If (openFile1.ShowDialog() = System.Windows.Forms.DialogResult.OK) _
        And (openFile1.FileName.Length > 0) Then
        
        ' Load the contents of the file into the RichTextBox.
        richTextBox1.LoadFile(openFile1.FileName, _
            RichTextBoxStreamType.PlainText)
    End If
End Sub

Poznámky

Při načítání souboru metodou LoadFile nahradí obsah načítaného souboru celý obsah RichTextBox ovládacího prvku. To způsobí změnu hodnot Text vlastností a Rtf . Tuto metodu můžete použít k načtení dříve vytvořeného dokumentu ve formátu RTF (Text Format) do ovládacího prvku pro manipulaci. Pokud chcete soubor uložit, můžete použít metodu SaveFile .

Tuto verzi LoadFile metody můžete použít k určení typu souboru, který se načítá. Tato funkce umožňuje načíst do ovládacího prvku jiné soubory než dokumenty VE FORMÁTU RTF.

Viz také

• SaveFile(String)
• RichTextBoxStreamType