Express Route and Azure Firewall
We have express route to on-prem and it is working fine. We are in the process of implementing Az Firewall but are having trouble getting the routing right. I know you cannot add routes to the Express Route subnet so how do we force traffic that…
Express Route Routing Issues (Azure to On-premises route)
Hi @GitaraniSharma-MSFT - We have performed the same setup from this article https://video2.skills-academy.com/en-us/answers/questions/860533/express-route-and-azure-firewall) We have 2 express route premium circuits (East US & South-Central US) with 3…
Since we ahve primary data center (DC) is already connected to Azure via ExpressRoute, options for connecting your on-premises DR datacenter to Azure
We have DC and DR datacenters at the on-prem level and the On-prem datacenter was connected to Azure through the Azure Express route and What are the other options we can get to connect Azure to the on-prem DR datacenter, how to establish connectivity…
routing tables on Express router and virtual network gateway
The express route table contains the prefixes on-prem and Azure vnets. The route table summary shows the bgp neighbors which live in GatewaySubnet. This clearly explains the routes from on-prem to Azure cloud. But the route table associated with…
UDR or Routetable pointing to multiple VNG's
Scenario : I have a GatewaySubnet with a VNG for a 3rd party vendor VPN solution and a VNG for ExpressRoute I need to create a RouteTable for the Resource Subnets with entries for Internet access and the VPN Subnet (Assumption is that the VNG for…
bgp neighbor IP address in express route table
After a vnet is peered with the vnet with express router, the express route table has some bgp routes with ASN 65515. For those routes, how can I know where the next hop points ? How does Azure assign these IPs ? thanks !!!
How are the vnet subnets propagated to on-prem via express router ?
via vnet peering ?
Really like to know what the next-hop IP points to for ASN 65515 in Azure express route !!!!
What do IPs in red point to ? thanks !!
Expressroute BGP advertising issue
We attempted to configure Expressroute between our site and MSEE Circuit. Everything seemed to go well but only the vNET for the Expressroute gateway was advertised back to our switch and not any of its peers. I believe the issue is related to the…
Transitioning to Expressroute from Meraki MX SiteToSite Routing question
I have been running a Meraki Site To Site VPN setup using MX on prem and VMX in Azure to connect our on prem environment to Azure. This includes having some Route Tables setup using the Virtual appliance as the next hop with associated subnets. We are…
If public IP address associated with the ExpressRoute gateway becomes unavailable will it impact the ExpressRoute circuit traffic
If public IP address associated with the ExpressRoute gateway becomes unavailable, will it impact only internal mgmt traffic or will it also affect the the ExrpessRoute circuit traffic.
steps to establish network connectivity between vmc aws to avs
We are planning to migrate the workloads from vmc on aws to avs and we are looking for detailed steps to establish network connectivity between to aws to avs. Thanks in advance.
Physical Express Route Link Migration
Trying to migrate the Express route circuit from an 1G physical circuit to 10G physical circuit. For migration, I'm trying to create a new circuit over the 10G link and create a new express route virtual network gateway. However, I'm getting the error…
Azureとオンプレのプライベートピアリングについて
こんにちは。ExpressRouteでオンプレ環境とプライベート ピアリングを構築したいです。 その際、プライマリ サブネットとセカンダリ サブネットの回線を収容するオンプレ機器は、別々の機器を用意する必要があるでしょうか。 1台のSWにプライマリとセカンダリの回線を収容したいのですが、そのような構成は可能でしょうか。
Express Route Gateway migration not working and throwing error "Gateway subnet needs two or more address prefixes for migration"
Express Route Gateway migration not working and throwing error "Gateway subnet needs two or more address prefixes for migration"
ExpressRoute with Azure routing question
Hi guys, I currently have ExpressRoute setup (Diagram), and it's been working fine. Except for one thing: all traffic from Prod-VMs (VNET-VMs 10.10.0.0/16) to workstations at my company doesn't go through firewalls FW-01 & FW-02 in Azure. However,…
Azure support for TLS 1.0 and TLS 1.1
Microsoft released the following announcement about TLS 1.0 and 1.1 end of support: https://azure.microsoft.com/en-us/updates/azure-support-tls-will-end-by-31-october-2024-2/ Old devices using TLS 1.0 (that cannot be upgraded) will continue to be able to…
In Express Route Circuit when metric type Arp and BGP Availability reaches 100% what it indicates. How can we identify and process the threshold or alert for this metrics.
In my Express route circuit while I am capturing the metrics I found the following type of metrics: Arp Availability and BGP Availability has showing 100%(Arp Availability (Avg)). So what is this impact on Express Route Circuit. If it reaches maximum…
Long running operation failed when I changed library version
Hello, we used in our pod in this library: com.azure.resourcemanager:azure-resourcemanager-network:2.8.0 To use this API: ExpressRouteCircuitsImpl expressRouteCircuits expressRouteCircuits.inner().listRoutesTable(resourceGroupName, circuitName,…
Azure Hub to Hub Vnet Peering
Dear Microsoft Q&A, I have a Hub & Spoke topology which includes 2 Hub & Spokes. When I attach route table to Express Route gateway /subnet, the injected routes are not being propagated to On-Prem network. Details: The objective is…