Wlan L1 Test 06 - Toggle airplane mode

This automated test toggles the radio states in the same way as the user interface airplane mode option..

Test details

Associated requirements

Device.Network.WLAN.Base.ConformToNDIS Device.Network.WLAN.CSBBase.ConformToNDIS

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~1 minutes

Categories

Basic Certification

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

The test completes the following:

  • Disables each radio that is reported to the operating system..

  • Each radio must change state and report its updated state in less than ten seconds.

  • Enables each radio that is reported to the operating system.

  • Each radio must change state and report its update state in under ten seconds

The test allows for and can accommodate devices that change the state of all radios when only one radio is requested.

The test will only fail if an exception is thrown when attempting any of the above tasks, or if radios do not change state within the time required.

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

 

 

Send comments about this topic to Microsoft