Wlan L1 Test 12 - Enable and Disable WFD Autonomous GO

This automated test enables WifiDirect Autonomous GO, checks for the SSID being broadcast, and then disables Autonomous GO.

Test details

Associated requirements

Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast4Clients Device.Network.WLAN.WiFiDirect.SupportAtLeast4Clients

See the device hardware requirements.

Platforms

Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~2 minutes

Categories

Basic Certification

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

This test does the following:

  • Test will fail if driver cannot return the WifiDirect capabilities.

  • Test will fail if driver returns ConcurrentOperationSupported as false.

  • Test will tell driver to enable Autonomous GO.

  • Test will request the SSID that is beaconing.

  • Test will stop Autonomous GO.

  • Test will fail if it cannot retrieve a non-empty SSID.

  • Test will fail if either start or stop of Autonomous GO fails.

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

 

 

Send comments about this topic to Microsoft