Wlan L1 Test 02 - Query Interface Properties

This automated test queries the interface for a variety of common properties.

Test details

Associated requirements

Device.Network.WLAN.Base.ConformToNDIS Device.Network.WLAN.CSBBase.ConformToNDIS

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~1 minutes

Categories

Basic Certification

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

This test queries the device for the following properties:

  • IsMediaStreamingEnabled

  • IsBackgroundScanEnabled

  • IsSafeModeSupported

  • sSafeModeCertified

  • GetCurrentOperationMode

  • GetInterfaceState

  • sManagementFrameProtectionSupported

  • IsHostedNetworkCapable

  • enumerate all radios and radio states

  • IsAutoConfigEnabled

  • enumerate all support infrastructure cipher pairs

  • devices without Connected Standby must enumerate supported adhoc cipher pairs

  • GetBSSMode

  • GetCountryList

  • GetConnectionAttributes

  • GetRSSi

  • GetChannel

Any returned failure in the WLAN service API from the device these capabilities are queried will result in a failure in the test

The test will fail if the following is true:

  • There are less than three infrastructure cipher pairs.

  • If DOT11_AUTH_ALGO_RSNA_PSK is not implemented.

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

 

 

Send comments about this topic to Microsoft