Wlan L1 Test 03 - Check for mandatory Oids
This automated test verifies the driver reports mandatory OIDs as supported
Associated requirements |
Device.Network.WLAN.Base.ConformToNDIS Device.Network.WLAN.CSBBase.ConformToNDIS |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~1 minutes |
Categories |
Basic Certification |
Type |
Automated |
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
The test completes the following:
Queries NDIS for all implemented OIDs that the driver returned during miniport initialization.
Compares the resulting list against all required OIDS listed here: https://msdn.microsoft.com/library/windows/hardware/ff571095(v=vs.85).aspx.
The test will fail if any of the required OIDs listed on MSDN are not reported by the driver during miniport initialization.
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.