DisplayMode Énumération
Définition
Important
Certaines informations portent sur la préversion du produit qui est susceptible d’être en grande partie modifiée avant sa publication. Microsoft exclut toute garantie, expresse ou implicite, concernant les informations fournies ici.
Définit des identificateurs qui indiquent les modes d'affichage utilisés par ByteViewer.
public enum class DisplayModepublic enum DisplayModetype DisplayMode = Public Enum DisplayMode- Héritage
Champs
| Ansi | 2 | Affichage au format ANSI. |
| Auto | 4 | Mode d'affichage qui sélectionne automatiquement un mode d'affichage. Dans ce mode, les octets sont examinés afin de déterminer s'ils sont au format hexadécimal ou imprimable. Si les octets sont au format hexadécimal, le mode Hexdump est sélectionné. Si les caractères correspondent à un jeu de caractères imprimables, un test s'exécute pour sélectionner automatiquement le mode d'affichage Ansi ou Unicode. |
| Hexdump | 1 | Affichage au format hexadécimal. |
| Unicode | 3 | Affichage au format Unicode. |
Exemples
L’exemple suivant montre comment utiliser DisplayMode des identificateurs. Cet exemple de code fait partie d’un exemple plus grand fourni pour la ByteViewer classe .
#using <System.Windows.Forms.dll>
#using <System.dll>
#using <System.Drawing.dll>
#using <System.Design.dll>
using namespace System;
using namespace System::Drawing;
using namespace System::Collections;
using namespace System::ComponentModel;
using namespace System::ComponentModel::Design;
using namespace System::Windows::Forms;
public ref class ByteViewerForm: public System::Windows::Forms::Form
{
private:
System::Windows::Forms::Button^ button1;
System::Windows::Forms::Button^ button2;
System::ComponentModel::Design::ByteViewer^ byteviewer;
public:
ByteViewerForm()
{
// Initialize the controls other than the ByteViewer.
InitializeForm();
// Initialize the ByteViewer.
byteviewer = gcnew ByteViewer;
byteviewer->Location = Point(8,46);
byteviewer->Size = System::Drawing::Size( 600, 338 );
byteviewer->Anchor = static_cast<AnchorStyles>(AnchorStyles::Left | AnchorStyles::Bottom | AnchorStyles::Top);
byteviewer->SetBytes( (array<Byte>^)Array::CreateInstance( Byte::typeid, 0 ) );
this->Controls->Add( byteviewer );
}
private:
// Show a file selection dialog and cues the byte viewer to
// load the data in a selected file.
void loadBytesFromFile( Object^ /*sender*/, EventArgs^ /*e*/ )
{
OpenFileDialog^ ofd = gcnew OpenFileDialog;
if ( ofd->ShowDialog() != ::DialogResult::OK )
return;
byteviewer->SetFile( ofd->FileName );
}
// Clear the bytes in the byte viewer.
void clearBytes( Object^ /*sender*/, EventArgs^ /*e*/ )
{
byteviewer->SetBytes( (array<Byte>^)Array::CreateInstance( Byte::typeid, 0 ) );
}
// Changes the display mode of the byte viewer according to the
// Text property of the RadioButton sender control.
void changeByteMode( Object^ sender, EventArgs^ /*e*/ )
{
System::Windows::Forms::RadioButton^ rbutton = dynamic_cast<System::Windows::Forms::RadioButton^>(sender);
DisplayMode mode;
if ( rbutton->Text->Equals( "ANSI" ) )
{
mode = DisplayMode::Ansi;
}
else
if ( rbutton->Text->Equals( "Hex" ) )
{
mode = DisplayMode::Hexdump;
}
else
if ( rbutton->Text->Equals( "Unicode" ) )
{
mode = DisplayMode::Unicode;
}
else
{
mode = DisplayMode::Auto;
}
// Sets the display mode.
byteviewer->SetDisplayMode( mode );
}
void InitializeForm()
{
this->SuspendLayout();
this->ClientSize = System::Drawing::Size( 680, 440 );
this->MinimumSize = System::Drawing::Size( 660, 400 );
this->Size = System::Drawing::Size( 680, 440 );
this->Name = "Byte Viewer Form";
this->Text = "Byte Viewer Form";
this->button1 = gcnew System::Windows::Forms::Button;
this->button1->Location = System::Drawing::Point( 8, 8 );
this->button1->Size = System::Drawing::Size( 190, 23 );
this->button1->Name = "button1";
this->button1->Text = "Set Bytes From File...";
this->button1->TabIndex = 0;
this->button1->Click += gcnew EventHandler( this, &ByteViewerForm::loadBytesFromFile );
this->Controls->Add( this->button1 );
this->button2 = gcnew System::Windows::Forms::Button;
this->button2->Location = System::Drawing::Point( 198, 8 );
this->button2->Size = System::Drawing::Size( 190, 23 );
this->button2->Name = "button2";
this->button2->Text = "Clear Bytes";
this->button2->Click += gcnew EventHandler( this, &ByteViewerForm::clearBytes );
this->button2->TabIndex = 1;
this->Controls->Add( this->button2 );
System::Windows::Forms::GroupBox^ group = gcnew System::Windows::Forms::GroupBox;
group->Location = Point(418,3);
group->Size = System::Drawing::Size( 220, 36 );
group->Text = "Display Mode";
this->Controls->Add( group );
System::Windows::Forms::RadioButton^ rbutton1 = gcnew System::Windows::Forms::RadioButton;
rbutton1->Location = Point(6,15);
rbutton1->Size = System::Drawing::Size( 46, 16 );
rbutton1->Text = "Auto";
rbutton1->Checked = true;
rbutton1->Click += gcnew EventHandler( this, &ByteViewerForm::changeByteMode );
group->Controls->Add( rbutton1 );
System::Windows::Forms::RadioButton^ rbutton2 = gcnew System::Windows::Forms::RadioButton;
rbutton2->Location = Point(54,15);
rbutton2->Size = System::Drawing::Size( 50, 16 );
rbutton2->Text = "ANSI";
rbutton2->Click += gcnew EventHandler( this, &ByteViewerForm::changeByteMode );
group->Controls->Add( rbutton2 );
System::Windows::Forms::RadioButton^ rbutton3 = gcnew System::Windows::Forms::RadioButton;
rbutton3->Location = Point(106,15);
rbutton3->Size = System::Drawing::Size( 46, 16 );
rbutton3->Text = "Hex";
rbutton3->Click += gcnew EventHandler( this, &ByteViewerForm::changeByteMode );
group->Controls->Add( rbutton3 );
System::Windows::Forms::RadioButton^ rbutton4 = gcnew System::Windows::Forms::RadioButton;
rbutton4->Location = Point(152,15);
rbutton4->Size = System::Drawing::Size( 64, 16 );
rbutton4->Text = "Unicode";
rbutton4->Click += gcnew EventHandler( this, &ByteViewerForm::changeByteMode );
group->Controls->Add( rbutton4 );
this->ResumeLayout( false );
}
};
[STAThread]
int main()
{
Application::Run( gcnew ByteViewerForm );
}
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.ComponentModel.Design;
using System.Windows.Forms;
namespace ByteViewerForm
{
public class ByteViewerForm : System.Windows.Forms.Form
{
private System.Windows.Forms.Button button1;
private System.Windows.Forms.Button button2;
private System.ComponentModel.Design.ByteViewer byteviewer;
public ByteViewerForm()
{
// Initialize the controls other than the ByteViewer.
InitializeForm();
// Initialize the ByteViewer.
byteviewer = new ByteViewer();
byteviewer.Location = new Point( 8, 46 );
byteviewer.Size = new Size( 600, 338 );
byteviewer.Anchor = AnchorStyles.Left | AnchorStyles.Bottom | AnchorStyles.Top;
byteviewer.SetBytes( new byte[] { } );
this.Controls.Add( byteviewer );
}
// Show a file selection dialog and cues the byte viewer to
// load the data in a selected file.
private void loadBytesFromFile(object sender, EventArgs e)
{
OpenFileDialog ofd = new OpenFileDialog();
if( ofd.ShowDialog() != DialogResult.OK )
return;
byteviewer.SetFile(ofd.FileName);
}
// Clear the bytes in the byte viewer.
private void clearBytes(object sender, EventArgs e)
{
byteviewer.SetBytes( new byte[] { } );
}
// Changes the display mode of the byte viewer according to the
// Text property of the RadioButton sender control.
private void changeByteMode(object sender, EventArgs e)
{
System.Windows.Forms.RadioButton rbutton =
(System.Windows.Forms.RadioButton)sender;
DisplayMode mode;
switch( rbutton.Text )
{
case "ANSI":
mode = DisplayMode.Ansi;
break;
case "Hex":
mode = DisplayMode.Hexdump;
break;
case "Unicode":
mode = DisplayMode.Unicode;
break;
default:
mode = DisplayMode.Auto;
break;
}
// Sets the display mode.
byteviewer.SetDisplayMode( mode );
}
private void InitializeForm()
{
this.SuspendLayout();
this.ClientSize = new System.Drawing.Size(680, 440);
this.MinimumSize = new System.Drawing.Size(660, 400);
this.Size = new System.Drawing.Size(680, 440);
this.Name = "Byte Viewer Form";
this.Text = "Byte Viewer Form";
this.button1 = new System.Windows.Forms.Button();
this.button1.Location = new System.Drawing.Point(8, 8);
this.button1.Size = new System.Drawing.Size(190, 23);
this.button1.Name = "button1";
this.button1.Text = "Set Bytes From File...";
this.button1.TabIndex = 0;
this.button1.Click += new EventHandler(this.loadBytesFromFile);
this.Controls.Add(this.button1);
this.button2 = new System.Windows.Forms.Button();
this.button2.Location = new System.Drawing.Point(198, 8);
this.button2.Size = new System.Drawing.Size(190, 23);
this.button2.Name = "button2";
this.button2.Text = "Clear Bytes";
this.button2.Click += new EventHandler(this.clearBytes);
this.button2.TabIndex = 1;
this.Controls.Add(this.button2);
System.Windows.Forms.GroupBox group = new System.Windows.Forms.GroupBox();
group.Location = new Point(418, 3);
group.Size = new Size(220, 36);
group.Text = "Display Mode";
this.Controls.Add( group );
System.Windows.Forms.RadioButton rbutton1 = new System.Windows.Forms.RadioButton();
rbutton1.Location = new Point(6, 15);
rbutton1.Size = new Size(46, 16);
rbutton1.Text = "Auto";
rbutton1.Checked = true;
rbutton1.Click += new EventHandler(this.changeByteMode);
group.Controls.Add( rbutton1 );
System.Windows.Forms.RadioButton rbutton2 = new System.Windows.Forms.RadioButton();
rbutton2.Location = new Point(54, 15);
rbutton2.Size = new Size(50, 16);
rbutton2.Text = "ANSI";
rbutton2.Click += new EventHandler(this.changeByteMode);
group.Controls.Add( rbutton2 );
System.Windows.Forms.RadioButton rbutton3 = new System.Windows.Forms.RadioButton();
rbutton3.Location = new Point(106, 15);
rbutton3.Size = new Size(46, 16);
rbutton3.Text = "Hex";
rbutton3.Click += new EventHandler(this.changeByteMode);
group.Controls.Add( rbutton3 );
System.Windows.Forms.RadioButton rbutton4 = new System.Windows.Forms.RadioButton();
rbutton4.Location = new Point(152, 15);
rbutton4.Size = new Size(64, 16);
rbutton4.Text = "Unicode";
rbutton4.Click += new EventHandler(this.changeByteMode);
group.Controls.Add( rbutton4 );
this.ResumeLayout(false);
}
[STAThread]
static void Main()
{
Application.Run(new ByteViewerForm());
}
}
}
Imports System.Drawing
Imports System.Collections
Imports System.ComponentModel
Imports System.ComponentModel.Design
Imports System.Windows.Forms
Public Class ByteViewerForm
Inherits System.Windows.Forms.Form
Private button1 As System.Windows.Forms.Button
Private button2 As System.Windows.Forms.Button
Private byteviewer As System.ComponentModel.Design.ByteViewer
Public Sub New()
' Initialize the controls other than the ByteViewer.
InitializeForm()
' Initialize the ByteViewer.
byteviewer = New ByteViewer
byteviewer.Location = New Point(8, 46)
byteviewer.Size = New Size(600, 338)
byteviewer.Anchor = AnchorStyles.Left Or AnchorStyles.Bottom Or AnchorStyles.Top
byteviewer.SetBytes(New Byte() {})
Me.Controls.Add(byteviewer)
End Sub
' Show a file selection dialog and cues the byte viewer to
' load the data in a selected file.
Private Sub loadBytesFromFile(ByVal sender As Object, ByVal e As EventArgs)
Dim ofd As New OpenFileDialog
If ofd.ShowDialog() <> System.Windows.Forms.DialogResult.OK Then
Return
End If
byteviewer.SetFile(ofd.FileName)
End Sub
' Clear the bytes in the byte viewer.
Private Sub clearBytes(ByVal sender As Object, ByVal e As EventArgs)
byteviewer.SetBytes(New Byte() {})
End Sub
' Changes the display mode of the byte viewer according to the
' Text property of the RadioButton sender control.
Private Sub changeByteMode(ByVal sender As Object, ByVal e As EventArgs)
Dim rbutton As System.Windows.Forms.RadioButton = _
CType(sender, System.Windows.Forms.RadioButton)
Dim mode As DisplayMode
Select Case rbutton.Text
Case "ANSI"
mode = DisplayMode.Ansi
Case "Hex"
mode = DisplayMode.Hexdump
Case "Unicode"
mode = DisplayMode.Unicode
Case Else
mode = DisplayMode.Auto
End Select
' Sets the display mode.
byteviewer.SetDisplayMode(mode)
End Sub
Private Sub InitializeForm()
Me.SuspendLayout()
Me.ClientSize = New System.Drawing.Size(680, 440)
Me.MinimumSize = New System.Drawing.Size(660, 400)
Me.Size = New System.Drawing.Size(680, 440)
Me.Name = "Byte Viewer Form"
Me.Text = "Byte Viewer Form"
Me.button1 = New System.Windows.Forms.Button
Me.button1.Location = New System.Drawing.Point(8, 8)
Me.button1.Size = New System.Drawing.Size(190, 23)
Me.button1.Name = "button1"
Me.button1.Text = "Set Bytes From File..."
Me.button1.TabIndex = 0
AddHandler Me.button1.Click, AddressOf Me.loadBytesFromFile
Me.Controls.Add(Me.button1)
Me.button2 = New System.Windows.Forms.Button
Me.button2.Location = New System.Drawing.Point(198, 8)
Me.button2.Size = New System.Drawing.Size(190, 23)
Me.button2.Name = "button2"
Me.button2.Text = "Clear Bytes"
AddHandler Me.button2.Click, AddressOf Me.clearBytes
Me.button2.TabIndex = 1
Me.Controls.Add(Me.button2)
Dim group As New System.Windows.Forms.GroupBox
group.Location = New Point(418, 3)
group.Size = New Size(220, 36)
group.Text = "Display Mode"
Me.Controls.Add(group)
Dim rbutton1 As New System.Windows.Forms.RadioButton
rbutton1.Location = New Point(6, 15)
rbutton1.Size = New Size(46, 16)
rbutton1.Text = "Auto"
rbutton1.Checked = True
AddHandler rbutton1.Click, AddressOf Me.changeByteMode
group.Controls.Add(rbutton1)
Dim rbutton2 As New System.Windows.Forms.RadioButton
rbutton2.Location = New Point(54, 15)
rbutton2.Size = New Size(50, 16)
rbutton2.Text = "ANSI"
AddHandler rbutton2.Click, AddressOf Me.changeByteMode
group.Controls.Add(rbutton2)
Dim rbutton3 As New System.Windows.Forms.RadioButton
rbutton3.Location = New Point(106, 15)
rbutton3.Size = New Size(46, 16)
rbutton3.Text = "Hex"
AddHandler rbutton3.Click, AddressOf Me.changeByteMode
group.Controls.Add(rbutton3)
Dim rbutton4 As New System.Windows.Forms.RadioButton
rbutton4.Location = New Point(152, 15)
rbutton4.Size = New Size(64, 16)
rbutton4.Text = "Unicode"
AddHandler rbutton4.Click, AddressOf Me.changeByteMode
group.Controls.Add(rbutton4)
Me.ResumeLayout(False)
End Sub
<STAThread()> _
Shared Sub Main()
Application.Run(New ByteViewerForm)
End Sub
End Class
Remarques
Les DisplayMode identificateurs sont utilisés pour indiquer le mode d’affichage utilisé pour afficher chaque séquence d’octets.
S’applique à
Voir aussi
Collaborer avec nous sur GitHub
La source de ce contenu se trouve sur GitHub, où vous pouvez également créer et examiner les problèmes et les demandes de tirage. Pour plus d’informations, consultez notre guide du contributeur.
