Graphics.FillPolygon Méthode

Référence

Définition

Espace de noms:: System.Drawing

Assembly:: System.Drawing.Common.dll

Assembly:: System.Drawing.dll

Paquet:: System.Drawing.Common v9.0.0-preview.7.24405.4

Paquet:: System.Drawing.Common v8.0.8

Important

Certaines informations portent sur la préversion du produit qui est susceptible d’être en grande partie modifiée avant sa publication. Microsoft exclut toute garantie, expresse ou implicite, concernant les informations fournies ici.

Remplit l’intérieur d’un polygone défini par un tableau de points spécifié par Point structures.

Surcharges

FillPolygon(Brush, ReadOnlySpan<PointF>, FillMode)
FillPolygon(Brush, ReadOnlySpan<Point>, FillMode)
FillPolygon(Brush, PointF[], FillMode)	Remplit l’intérieur d’un polygone défini par un tableau de points spécifié par PointF structures à l’aide du mode de remplissage spécifié.
FillPolygon(Brush, Point[], FillMode)	Remplit l’intérieur d’un polygone défini par un tableau de points spécifié par Point structures à l’aide du mode de remplissage spécifié.
FillPolygon(Brush, ReadOnlySpan<Point>)
FillPolygon(Brush, PointF[])	Remplit l’intérieur d’un polygone défini par un tableau de points spécifié par PointF structures.
FillPolygon(Brush, Point[])	Remplit l’intérieur d’un polygone défini par un tableau de points spécifié par Point structures.
FillPolygon(Brush, ReadOnlySpan<PointF>)

FillPolygon(Brush, ReadOnlySpan<PointF>, FillMode)

Source:: Graphics.cs

Source:: Graphics.cs

public:
 void FillPolygon(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::PointF> points, System::Drawing::Drawing2D::FillMode fillMode);

public void FillPolygon (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.PointF> points, System.Drawing.Drawing2D.FillMode fillMode);

member this.FillPolygon : System.Drawing.Brush * ReadOnlySpan<System.Drawing.PointF> * System.Drawing.Drawing2D.FillMode -> unit

Public Sub FillPolygon (brush As Brush, points As ReadOnlySpan(Of PointF), fillMode As FillMode)

Paramètres

brush: Brush

points: ReadOnlySpan<PointF>

fillMode: FillMode

S’applique à

FillPolygon(Brush, ReadOnlySpan<Point>, FillMode)

Source:: Graphics.cs

Source:: Graphics.cs

public:
 void FillPolygon(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::Point> points, System::Drawing::Drawing2D::FillMode fillMode);

public void FillPolygon (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.Point> points, System.Drawing.Drawing2D.FillMode fillMode);

member this.FillPolygon : System.Drawing.Brush * ReadOnlySpan<System.Drawing.Point> * System.Drawing.Drawing2D.FillMode -> unit

Public Sub FillPolygon (brush As Brush, points As ReadOnlySpan(Of Point), fillMode As FillMode)

Paramètres

brush: Brush

points: ReadOnlySpan<Point>

fillMode: FillMode

S’applique à

FillPolygon(Brush, PointF[], FillMode)

Source:: Graphics.cs

Source:: Graphics.cs

Source:: Graphics.cs

Source:: Graphics.cs

Source:: Graphics.cs

Remplit l’intérieur d’un polygone défini par un tableau de points spécifié par PointF structures à l’aide du mode de remplissage spécifié.

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points, System::Drawing::Drawing2D::FillMode fillMode);

public void FillPolygon (System.Drawing.Brush brush, System.Drawing.PointF[] points, System.Drawing.Drawing2D.FillMode fillMode);

member this.FillPolygon : System.Drawing.Brush * System.Drawing.PointF[] * System.Drawing.Drawing2D.FillMode -> unit

Public Sub FillPolygon (brush As Brush, points As PointF(), fillMode As FillMode)

Paramètres

brush: Brush

Brush qui détermine les caractéristiques du remplissage.

points: PointF[]

Tableau de structures PointF qui représentent les sommets du polygone à remplir.

fillMode: FillMode

Membre de l’énumération FillMode qui détermine le style du remplissage.

Exceptions

ArgumentNullException

brush est null.

-ou-

points est null.

Exemples

L’exemple de code suivant est conçu pour être utilisé avec Windows Forms et nécessite PaintEventArgse, qui est un paramètre du gestionnaire d’événements Paint. Le code effectue l’action suivante :

Crée un pinceau bleu unie.
Crée un tableau de sept points pour définir un polygone.
Définit le mode de remplissage sur Winding.
Remplit la zone polygonale sur l’écran.

public:
   void FillPolygonPointFFillMode( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      PointF point1 = PointF(50.0F,50.0F);
      PointF point2 = PointF(100.0F,25.0F);
      PointF point3 = PointF(200.0F,5.0F);
      PointF point4 = PointF(250.0F,50.0F);
      PointF point5 = PointF(300.0F,100.0F);
      PointF point6 = PointF(350.0F,200.0F);
      PointF point7 = PointF(250.0F,250.0F);
      array<PointF>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Define fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Fill polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints, newFillMode );
   }

public void FillPolygonPointFFillMode(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    PointF point1 = new PointF(50.0F, 50.0F);
    PointF point2 = new PointF(100.0F, 25.0F);
    PointF point3 = new PointF(200.0F, 5.0F);
    PointF point4 = new PointF(250.0F, 50.0F);
    PointF point5 = new PointF(300.0F, 100.0F);
    PointF point6 = new PointF(350.0F, 200.0F);
    PointF point7 = new PointF(250.0F, 250.0F);
    PointF[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Define fill mode.
    FillMode newFillMode = FillMode.Winding;

    // Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode);
}

Public Sub FillPolygonPointFFillMode(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Define fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode)
End Sub

Remarques

Tous les deux points consécutifs du tableau spécifient un côté du polygone. En outre, si le dernier point et le premier point ne coïncident pas, ils spécifient le côté fermant du polygone.

S’applique à

FillPolygon(Brush, Point[], FillMode)

Source:: Graphics.cs

Source:: Graphics.cs

Source:: Graphics.cs

Source:: Graphics.cs

Source:: Graphics.cs

Remplit l’intérieur d’un polygone défini par un tableau de points spécifié par Point structures à l’aide du mode de remplissage spécifié.

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points, System::Drawing::Drawing2D::FillMode fillMode);

public void FillPolygon (System.Drawing.Brush brush, System.Drawing.Point[] points, System.Drawing.Drawing2D.FillMode fillMode);

member this.FillPolygon : System.Drawing.Brush * System.Drawing.Point[] * System.Drawing.Drawing2D.FillMode -> unit

Public Sub FillPolygon (brush As Brush, points As Point(), fillMode As FillMode)

Paramètres

brush: Brush

Brush qui détermine les caractéristiques du remplissage.

points: Point[]

Tableau de structures Point qui représentent les sommets du polygone à remplir.

fillMode: FillMode

Membre de l’énumération FillMode qui détermine le style du remplissage.

Exceptions

ArgumentNullException

brush est null.

-ou-

points est null.

Exemples

Crée un pinceau bleu unie.
Crée un tableau de sept points pour définir un polygone.
Définit le mode de remplissage sur Winding.
Remplit la zone polygonale sur l’écran.

public:
   void FillPolygonPointFillMode( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      Point point1 = Point(50,50);
      Point point2 = Point(100,25);
      Point point3 = Point(200,5);
      Point point4 = Point(250,50);
      Point point5 = Point(300,100);
      Point point6 = Point(350,200);
      Point point7 = Point(250,250);
      array<Point>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Define fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Draw polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints, newFillMode );
   }

public void FillPolygonPointFillMode(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    Point point1 = new Point(50, 50);
    Point point2 = new Point(100, 25);
    Point point3 = new Point(200, 5);
    Point point4 = new Point(250, 50);
    Point point5 = new Point(300, 100);
    Point point6 = new Point(350, 200);
    Point point7 = new Point(250, 250);
    Point[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Define fill mode.
    FillMode newFillMode = FillMode.Winding;

    // Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode);
}

Public Sub FillPolygonPointFillMode(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Define fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode)
End Sub

Remarques

Tous les deux points consécutifs du tableau spécifient un côté du polygone. En outre, si le dernier point et le premier point ne coïncident pas, ils spécifient le côté fermant du polygone.

S’applique à

FillPolygon(Brush, ReadOnlySpan<Point>)

Source:: Graphics.cs

Source:: Graphics.cs

public:
 void FillPolygon(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::Point> points);

public void FillPolygon (System.Drawing.Brush brush, scoped ReadOnlySpan<System.Drawing.Point> points);

member this.FillPolygon : System.Drawing.Brush * ReadOnlySpan<System.Drawing.Point> -> unit

Public Sub FillPolygon (brush As Brush, points As ReadOnlySpan(Of Point))

Paramètres

brush: Brush

points: ReadOnlySpan<Point>

S’applique à

FillPolygon(Brush, PointF[])

Source:: Graphics.cs

Source:: Graphics.cs

Source:: Graphics.cs

Source:: Graphics.cs

Source:: Graphics.cs

Remplit l’intérieur d’un polygone défini par un tableau de points spécifié par PointF structures.

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points);

public:
 void FillPolygon(System::Drawing::Brush ^ brush, ... cli::array <System::Drawing::PointF> ^ points);

public void FillPolygon (System.Drawing.Brush brush, System.Drawing.PointF[] points);

public void FillPolygon (System.Drawing.Brush brush, params System.Drawing.PointF[] points);

member this.FillPolygon : System.Drawing.Brush * System.Drawing.PointF[] -> unit

Public Sub FillPolygon (brush As Brush, points As PointF())

Public Sub FillPolygon (brush As Brush, ParamArray points As PointF())

Paramètres

brush: Brush

Brush qui détermine les caractéristiques du remplissage.

points: PointF[]

Tableau de structures PointF qui représentent les sommets du polygone à remplir.

Exceptions

ArgumentNullException

brush est null.

-ou-

points est null.

Exemples

Crée un pinceau bleu unie.
Crée un tableau de sept points pour définir un polygone.
Remplit la zone polygonale sur l’écran.

public:
   void FillPolygonPointF( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      PointF point1 = PointF(50.0F,50.0F);
      PointF point2 = PointF(100.0F,25.0F);
      PointF point3 = PointF(200.0F,5.0F);
      PointF point4 = PointF(250.0F,50.0F);
      PointF point5 = PointF(300.0F,100.0F);
      PointF point6 = PointF(350.0F,200.0F);
      PointF point7 = PointF(250.0F,250.0F);
      array<PointF>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Fill polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints );
   }

public void FillPolygonPointF(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    PointF point1 = new PointF(50.0F, 50.0F);
    PointF point2 = new PointF(100.0F, 25.0F);
    PointF point3 = new PointF(200.0F, 5.0F);
    PointF point4 = new PointF(250.0F, 50.0F);
    PointF point5 = new PointF(300.0F, 100.0F);
    PointF point6 = new PointF(350.0F, 200.0F);
    PointF point7 = new PointF(250.0F, 250.0F);
    PointF[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints);
}

Public Sub FillPolygonPointF(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints)
End Sub

Remarques

Tous les deux points consécutifs du tableau spécifient un côté du polygone. En outre, si le dernier point et le premier point ne coïncident pas, ils spécifient le côté fermant du polygone.

S’applique à

FillPolygon(Brush, Point[])

Source:: Graphics.cs

Source:: Graphics.cs

Source:: Graphics.cs

Source:: Graphics.cs

Source:: Graphics.cs

Remplit l’intérieur d’un polygone défini par un tableau de points spécifié par Point structures.

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points);

public void FillPolygon (System.Drawing.Brush brush, System.Drawing.Point[] points);

member this.FillPolygon : System.Drawing.Brush * System.Drawing.Point[] -> unit

Public Sub FillPolygon (brush As Brush, points As Point())

Paramètres

brush: Brush

Brush qui détermine les caractéristiques du remplissage.

points: Point[]

Tableau de structures Point qui représentent les sommets du polygone à remplir.

Exceptions

ArgumentNullException

brush est null.

-ou-

points est null.

Exemples

Crée un pinceau bleu unie.
Crée un tableau de sept points pour définir un polygone.
Remplit la zone polygonale sur l’écran.

public:
   void FillPolygonPoint( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      Point point1 = Point(50,50);
      Point point2 = Point(100,25);
      Point point3 = Point(200,5);
      Point point4 = Point(250,50);
      Point point5 = Point(300,100);
      Point point6 = Point(350,200);
      Point point7 = Point(250,250);
      array<Point>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Draw polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints );
   }

public void FillPolygonPoint(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    Point point1 = new Point(50, 50);
    Point point2 = new Point(100, 25);
    Point point3 = new Point(200, 5);
    Point point4 = new Point(250, 50);
    Point point5 = new Point(300, 100);
    Point point6 = new Point(350, 200);
    Point point7 = new Point(250, 250);
    Point[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints);
}

Public Sub FillPolygonPoint(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints)
End Sub

Remarques

Tous les deux points consécutifs du tableau spécifient un côté du polygone. En outre, si le dernier point et le premier point ne coïncident pas, ils spécifient le côté fermant du polygone.

S’applique à

FillPolygon(Brush, ReadOnlySpan<PointF>)

Source:: Graphics.cs

Source:: Graphics.cs

public:
 void FillPolygon(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::PointF> points);

public void FillPolygon (System.Drawing.Brush brush, scoped ReadOnlySpan<System.Drawing.PointF> points);

member this.FillPolygon : System.Drawing.Brush * ReadOnlySpan<System.Drawing.PointF> -> unit

Public Sub FillPolygon (brush As Brush, points As ReadOnlySpan(Of PointF))

Paramètres

brush: Brush

points: ReadOnlySpan<PointF>

S’applique à

Partager via

Graphics.FillPolygon Méthode

Définition

Surcharges

FillPolygon(Brush, ReadOnlySpan<PointF>, FillMode)

Paramètres

S’applique à

FillPolygon(Brush, ReadOnlySpan<Point>, FillMode)

Paramètres

S’applique à

FillPolygon(Brush, PointF[], FillMode)

Paramètres

Exceptions

Exemples

Remarques

S’applique à

FillPolygon(Brush, Point[], FillMode)

Paramètres

Exceptions

Exemples

Remarques

S’applique à

FillPolygon(Brush, ReadOnlySpan<Point>)

Paramètres

S’applique à

FillPolygon(Brush, PointF[])

Paramètres

Exceptions

Exemples

Remarques

S’applique à

FillPolygon(Brush, Point[])

Paramètres

Exceptions

Exemples

Remarques

S’applique à

FillPolygon(Brush, ReadOnlySpan<PointF>)

Paramètres

S’applique à

Ressources supplémentaires