BinaryWriter.Write Méthode

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(cli::array <char> ^ chars, int index, int count);

public virtual void Write (char[] chars, int index, int count);

abstract member Write : char[] * int * int -> unit
override this.Write : char[] * int * int -> unit

Public Overridable Sub Write (chars As Char(), index As Integer, count As Integer)

Paramètres

Exceptions

Exemples

L’exemple de code suivant montre comment lire et écrire des données à l’aide de la mémoire comme magasin de stockage.

using namespace System;
using namespace System::IO;
int main()
{
   array<Char>^invalidPathChars = Path::InvalidPathChars;
   MemoryStream^ memStream = gcnew MemoryStream;
   BinaryWriter^ binWriter = gcnew BinaryWriter( memStream );
   
   // Write to memory.
   binWriter->Write( "Invalid file path characters are: " );
   binWriter->Write( Path::InvalidPathChars, 0, Path::InvalidPathChars->Length );
   
   // Create the reader using the same MemoryStream 
   // as used with the writer.
   BinaryReader^ binReader = gcnew BinaryReader( memStream );
   
   // Set Position to the beginning of the stream.
   binReader->BaseStream->Position = 0;
   
   // Read the data from memory and write it to the console.
   Console::Write( binReader->ReadString() );
   int arraySize = (int)(memStream->Length - memStream->Position);
   array<Char>^memoryData = gcnew array<Char>(arraySize);
   binReader->Read( memoryData, 0, arraySize );
   Console::WriteLine( memoryData );
}

using System;
using System.IO;

class BinaryRW
{
    static void Main()
    {
        char[] invalidPathChars = Path.InvalidPathChars;
        MemoryStream memStream = new MemoryStream();
        BinaryWriter binWriter = new BinaryWriter(memStream);

        // Write to memory.
        binWriter.Write("Invalid file path characters are: ");
        binWriter.Write(
            Path.InvalidPathChars, 0, Path.InvalidPathChars.Length);

        // Create the reader using the same MemoryStream
        // as used with the writer.
        BinaryReader binReader = new BinaryReader(memStream);

        // Set Position to the beginning of the stream.
        memStream.Position = 0;

        // Read the data from memory and write it to the console.
        Console.Write(binReader.ReadString());
        int arraySize = (int)(memStream.Length - memStream.Position);
        char[] memoryData = new char[arraySize];
        binReader.Read(memoryData, 0, arraySize);
        Console.WriteLine(memoryData);
    }
}

open System.IO

let invalidPathChars = Path.GetInvalidPathChars()
let memStream = new MemoryStream()
let binWriter = new BinaryWriter(memStream)

// Write to memory.
binWriter.Write "Invalid file path characters are: "
binWriter.Write(invalidPathChars, 0, invalidPathChars.Length)

// Create the reader using the same MemoryStream
// as used with the writer.
let binReader = new BinaryReader(memStream)

// Set Position to the beginning of the stream.
memStream.Position <- 0

// Read the data from memory and write it to the console.
printf $"{binReader.ReadString()}"
let arraySize = memStream.Length - memStream.Position |> int
let memoryData = Array.zeroCreate<char> arraySize
binReader.Read(memoryData, 0, arraySize) |> ignore
printfn $"{memoryData}"

Imports System.IO

Public Class BinaryRW

    Shared Sub Main()
    
        Dim invalidPathChars() As Char = Path.InvalidPathChars
        Dim memStream As new MemoryStream()
        Dim binWriter As New BinaryWriter(memStream)

        ' Write to memory.
        binWriter.Write("Invalid file path characters are: ")
        binWriter.Write(Path.InvalidPathChars, 0, _
            Path.InvalidPathChars.Length)

        ' Create the reader using the same MemoryStream 
        ' as used with the writer.
        Dim binReader As New BinaryReader(memStream)

        ' Set Position to the beginning of the stream.
        memStream.Position = 0

        ' Read the data from memory and write it to the console.
        Console.Write(binReader.ReadString())
        Dim upperBound As Integer = _
            CInt(memStream.Length - memStream.Position) - 1
        Dim memoryData(upperBound) As Char
        binReader.Read(memoryData, 0, upperBound)
        Console.WriteLine(memoryData)
    
    End Sub
End Class

Remarques

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Encoding
• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(cli::array <System::Byte> ^ buffer, int index, int count);

public virtual void Write (byte[] buffer, int index, int count);

abstract member Write : byte[] * int * int -> unit
override this.Write : byte[] * int * int -> unit

Public Overridable Sub Write (buffer As Byte(), index As Integer, count As Integer)

Paramètres

Exceptions

Exemples

L’exemple de code suivant montre comment écrire des données binaires à l’aide de la mémoire comme magasin de stockage, puis vérifier que les données ont été écrites correctement.

using System;
using System.IO;

namespace BinaryRW
{
    class Program
    {
        static void Main(string[] args)
        {
            const int arrayLength = 1000;
            byte[] dataArray = new byte[arrayLength];
            byte[] verifyArray = new byte[arrayLength];

            new Random().NextBytes(dataArray);

            using (BinaryWriter binWriter = new BinaryWriter(new MemoryStream()))
            {
                Console.WriteLine("Writing the data.");
                binWriter.Write(dataArray, 0, arrayLength);

                using (BinaryReader binReader = new BinaryReader(binWriter.BaseStream))
                {
                    binReader.BaseStream.Position = 0;

                    if (binReader.Read(verifyArray, 0, arrayLength) != arrayLength)
                    {
                        Console.WriteLine("Error writing the data.");
                        return;
                    }
                }
            }

            for (int i = 0; i < arrayLength; i++)
            {
                if (verifyArray[i] != dataArray[i])
                {
                    Console.WriteLine("Error writing the data.");
                    return;
                }
            }

            Console.WriteLine("The data was written and verified.");
        }
    }
}

open System
open System.IO

let arrayLength = 1000
let dataArray = Array.zeroCreate<byte> arrayLength
let verifyArray = Array.zeroCreate<byte> arrayLength

Random().NextBytes dataArray

do
    use binWriter = new BinaryWriter(new MemoryStream())
    printfn "Writing the data."
    binWriter.Write(dataArray, 0, arrayLength)

    use binReader = new BinaryReader(binWriter.BaseStream)
    binReader.BaseStream.Position <- 0

    if binReader.Read(verifyArray, 0, arrayLength) <> arrayLength then
        printfn "Error writing the data."
    else
        for i = 0 to arrayLength - 1 do
            if verifyArray[i] <> dataArray[i] then
                printfn "Error writing the data."
            else
                printfn "The data was written and verified."

Imports System.IO

Module Module1

    Sub Main()
        Const upperBound As Integer = 1000
        Dim dataArray(upperBound) As Byte
        Dim verifyArray(upperBound) As Byte

        Dim randomGenerator As New Random
        randomGenerator.NextBytes(dataArray)

        Using binWriter As New BinaryWriter(New MemoryStream())
            Console.WriteLine("Writing the data.")
            binWriter.Write(dataArray, 0, dataArray.Length)

            Using binReader As New BinaryReader(binWriter.BaseStream)
                binReader.BaseStream.Position = 0

                If binReader.Read(verifyArray, 0, dataArray.Length) <> dataArray.Length Then
                    Console.WriteLine("Error writing the data.")
                    Return
                End If
            End Using
        End Using

        For i As Integer = 0 To upperBound
            If verifyArray(i) <> dataArray(i) Then
                Console.WriteLine("Error writing the data.")
                Return
            End If
        Next i

        Console.WriteLine("The data was written and verified.")
    End Sub

End Module

Remarques

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(System::UInt64 value);

[System.CLSCompliant(false)]
public virtual void Write (ulong value);

[<System.CLSCompliant(false)>]
abstract member Write : uint64 -> unit
override this.Write : uint64 -> unit

Public Overridable Sub Write (value As ULong)

Paramètres

Attributs

CLSCompliantAttribute

Exceptions

Remarques

BinaryWriter stocke ce type de données au format little endian.

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(System::UInt32 value);

[System.CLSCompliant(false)]
public virtual void Write (uint value);

[<System.CLSCompliant(false)>]
abstract member Write : uint32 -> unit
override this.Write : uint32 -> unit

Public Overridable Sub Write (value As UInteger)

Paramètres

Attributs

CLSCompliantAttribute

Exceptions

Remarques

BinaryWriter stocke ce type de données au format little endian.

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(System::UInt16 value);

[System.CLSCompliant(false)]
public virtual void Write (ushort value);

[<System.CLSCompliant(false)>]
abstract member Write : uint16 -> unit
override this.Write : uint16 -> unit

Public Overridable Sub Write (value As UShort)

Paramètres

Attributs

CLSCompliantAttribute

Exceptions

Remarques

BinaryWriter stocke ce type de données au format little endian.

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(System::String ^ value);

public virtual void Write (string value);

abstract member Write : string -> unit
override this.Write : string -> unit

Public Overridable Sub Write (value As String)

Paramètres

Exceptions

Exemples

L’exemple de code suivant montre comment stocker et récupérer des paramètres d’application dans un fichier.

using System;
using System.IO;
using System.Text;

class ConsoleApplication
{
    const string fileName = "AppSettings.dat";

    static void Main()
    {
        WriteDefaultValues();
        DisplayValues();
    }

    public static void WriteDefaultValues()
    {
        using (var stream = File.Open(fileName, FileMode.Create))
        {
            using (var writer = new BinaryWriter(stream, Encoding.UTF8, false))
            {
                writer.Write(1.250F);
                writer.Write(@"c:\Temp");
                writer.Write(10);
                writer.Write(true);
            }
        }
    }

    public static void DisplayValues()
    {
        float aspectRatio;
        string tempDirectory;
        int autoSaveTime;
        bool showStatusBar;

        if (File.Exists(fileName))
        {
            using (var stream = File.Open(fileName, FileMode.Open))
            {
                using (var reader = new BinaryReader(stream, Encoding.UTF8, false))
                {
                    aspectRatio = reader.ReadSingle();
                    tempDirectory = reader.ReadString();
                    autoSaveTime = reader.ReadInt32();
                    showStatusBar = reader.ReadBoolean();
                }
            }

            Console.WriteLine("Aspect ratio set to: " + aspectRatio);
            Console.WriteLine("Temp directory is: " + tempDirectory);
            Console.WriteLine("Auto save time set to: " + autoSaveTime);
            Console.WriteLine("Show status bar: " + showStatusBar);
        }
    }
}

open System.IO
open System.Text

let fileName = "AppSettings.dat"

let writeDefaultValues () =
    use stream = File.Open(fileName, FileMode.Create)
    use writer = new BinaryWriter(stream, Encoding.UTF8, false)
    writer.Write 1.250F
    writer.Write @"c:\Temp"
    writer.Write 10
    writer.Write true

let displayValues () =
    if File.Exists fileName then
        use stream = File.Open(fileName, FileMode.Open)
        use reader = new BinaryReader(stream, Encoding.UTF8, false)
        let aspectRatio = reader.ReadSingle()
        let tempDirectory = reader.ReadString()
        let autoSaveTime = reader.ReadInt32()
        let showStatusBar = reader.ReadBoolean()

        printfn $"Aspect ratio set to: {aspectRatio}"
        printfn $"Temp directory is: {tempDirectory}"
        printfn $"Auto save time set to: {autoSaveTime}"
        printfn $"Show status bar: {showStatusBar}"

writeDefaultValues ()
displayValues ()

Imports System.IO

Module Module1
    Const fileName As String = "AppSettings.dat"

    Sub Main()
        WriteDefaultValues()
        DisplayValues()
    End Sub

    Sub WriteDefaultValues()
        Using writer As BinaryWriter = New BinaryWriter(File.Open(fileName, FileMode.Create))
            writer.Write(1.25F)
            writer.Write("c:\Temp")
            writer.Write(10)
            writer.Write(True)
        End Using
    End Sub

    Sub DisplayValues()
        Dim aspectRatio As Single
        Dim tempDirectory As String
        Dim autoSaveTime As Integer
        Dim showStatusBar As Boolean

        If (File.Exists(fileName)) Then

            Using reader As BinaryReader = New BinaryReader(File.Open(fileName, FileMode.Open))
                aspectRatio = reader.ReadSingle()
                tempDirectory = reader.ReadString()
                autoSaveTime = reader.ReadInt32()
                showStatusBar = reader.ReadBoolean()
            End Using

            Console.WriteLine("Aspect ratio set to: " & aspectRatio)
            Console.WriteLine("Temp directory is: " & tempDirectory)
            Console.WriteLine("Auto save time set to: " & autoSaveTime)
            Console.WriteLine("Show status bar: " & showStatusBar)
        End If
    End Sub

End Module

Remarques

Avec préfixe de longueur, cette méthode écrit d’abord la longueur de la chaîne, en octets, lorsqu’elle est encodée avec l’encodage BinaryWriter actuel du instance dans le flux. Cette valeur est écrite sous la forme d’un entier non signé. Cette méthode écrit ensuite ce nombre d’octets dans le flux.

Par exemple, la chaîne « A » a une longueur de 1, mais lorsqu’elle est encodée avec UTF-16 ; la longueur étant de 2 octets, la valeur écrite dans le préfixe est 2, et 3 octets sont écrits dans le flux, y compris le préfixe.

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Encoding
• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(float value);

public virtual void Write (float value);

abstract member Write : single -> unit
override this.Write : single -> unit

Public Overridable Sub Write (value As Single)

Paramètres

Exceptions

Exemples

L’exemple de code suivant montre comment stocker et récupérer des paramètres d’application dans un fichier.

using System;
using System.IO;
using System.Text;

class ConsoleApplication
{
    const string fileName = "AppSettings.dat";

    static void Main()
    {
        WriteDefaultValues();
        DisplayValues();
    }

    public static void WriteDefaultValues()
    {
        using (var stream = File.Open(fileName, FileMode.Create))
        {
            using (var writer = new BinaryWriter(stream, Encoding.UTF8, false))
            {
                writer.Write(1.250F);
                writer.Write(@"c:\Temp");
                writer.Write(10);
                writer.Write(true);
            }
        }
    }

    public static void DisplayValues()
    {
        float aspectRatio;
        string tempDirectory;
        int autoSaveTime;
        bool showStatusBar;

        if (File.Exists(fileName))
        {
            using (var stream = File.Open(fileName, FileMode.Open))
            {
                using (var reader = new BinaryReader(stream, Encoding.UTF8, false))
                {
                    aspectRatio = reader.ReadSingle();
                    tempDirectory = reader.ReadString();
                    autoSaveTime = reader.ReadInt32();
                    showStatusBar = reader.ReadBoolean();
                }
            }

            Console.WriteLine("Aspect ratio set to: " + aspectRatio);
            Console.WriteLine("Temp directory is: " + tempDirectory);
            Console.WriteLine("Auto save time set to: " + autoSaveTime);
            Console.WriteLine("Show status bar: " + showStatusBar);
        }
    }
}

open System.IO
open System.Text

let fileName = "AppSettings.dat"

let writeDefaultValues () =
    use stream = File.Open(fileName, FileMode.Create)
    use writer = new BinaryWriter(stream, Encoding.UTF8, false)
    writer.Write 1.250F
    writer.Write @"c:\Temp"
    writer.Write 10
    writer.Write true

let displayValues () =
    if File.Exists fileName then
        use stream = File.Open(fileName, FileMode.Open)
        use reader = new BinaryReader(stream, Encoding.UTF8, false)
        let aspectRatio = reader.ReadSingle()
        let tempDirectory = reader.ReadString()
        let autoSaveTime = reader.ReadInt32()
        let showStatusBar = reader.ReadBoolean()

        printfn $"Aspect ratio set to: {aspectRatio}"
        printfn $"Temp directory is: {tempDirectory}"
        printfn $"Auto save time set to: {autoSaveTime}"
        printfn $"Show status bar: {showStatusBar}"

writeDefaultValues ()
displayValues ()

Imports System.IO

Module Module1
    Const fileName As String = "AppSettings.dat"

    Sub Main()
        WriteDefaultValues()
        DisplayValues()
    End Sub

    Sub WriteDefaultValues()
        Using writer As BinaryWriter = New BinaryWriter(File.Open(fileName, FileMode.Create))
            writer.Write(1.25F)
            writer.Write("c:\Temp")
            writer.Write(10)
            writer.Write(True)
        End Using
    End Sub

    Sub DisplayValues()
        Dim aspectRatio As Single
        Dim tempDirectory As String
        Dim autoSaveTime As Integer
        Dim showStatusBar As Boolean

        If (File.Exists(fileName)) Then

            Using reader As BinaryReader = New BinaryReader(File.Open(fileName, FileMode.Open))
                aspectRatio = reader.ReadSingle()
                tempDirectory = reader.ReadString()
                autoSaveTime = reader.ReadInt32()
                showStatusBar = reader.ReadBoolean()
            End Using

            Console.WriteLine("Aspect ratio set to: " & aspectRatio)
            Console.WriteLine("Temp directory is: " & tempDirectory)
            Console.WriteLine("Auto save time set to: " & autoSaveTime)
            Console.WriteLine("Show status bar: " & showStatusBar)
        End If
    End Sub

End Module

Remarques

BinaryWriter stocke ce type de données au format little endian.

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(System::SByte value);

[System.CLSCompliant(false)]
public virtual void Write (sbyte value);

[<System.CLSCompliant(false)>]
abstract member Write : sbyte -> unit
override this.Write : sbyte -> unit

Public Overridable Sub Write (value As SByte)

Paramètres

Attributs

CLSCompliantAttribute

Exceptions

Remarques

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(ReadOnlySpan<char> chars);

public virtual void Write (ReadOnlySpan<char> chars);

abstract member Write : ReadOnlySpan<char> -> unit
override this.Write : ReadOnlySpan<char> -> unit

Public Overridable Sub Write (chars As ReadOnlySpan(Of Char))

Paramètres

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(ReadOnlySpan<System::Byte> buffer);

public virtual void Write (ReadOnlySpan<byte> buffer);

abstract member Write : ReadOnlySpan<byte> -> unit
override this.Write : ReadOnlySpan<byte> -> unit

Public Overridable Sub Write (buffer As ReadOnlySpan(Of Byte))

Paramètres

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(long value);

public virtual void Write (long value);

abstract member Write : int64 -> unit
override this.Write : int64 -> unit

Public Overridable Sub Write (value As Long)

Paramètres

Exceptions

Remarques

BinaryWriter stocke ce type de données au format little endian.

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(cli::array <char> ^ chars);

public virtual void Write (char[] chars);

abstract member Write : char[] -> unit
override this.Write : char[] -> unit

Public Overridable Sub Write (chars As Char())

Paramètres

Exceptions

Exemples

L’exemple de code suivant montre comment lire et écrire des données à l’aide de la mémoire comme magasin de stockage.

using namespace System;
using namespace System::IO;
int main()
{
   array<Char>^invalidPathChars = Path::InvalidPathChars;
   MemoryStream^ memStream = gcnew MemoryStream;
   BinaryWriter^ binWriter = gcnew BinaryWriter( memStream );
   
   // Write to memory.
   binWriter->Write( "Invalid file path characters are: " );
   binWriter->Write( Path::InvalidPathChars );
   
   // Create the reader using the same MemoryStream 
   // as used with the writer.
   BinaryReader^ binReader = gcnew BinaryReader( memStream );
   
   // Set Position to the beginning of the stream.
   binReader->BaseStream->Position = 0;
   
   // Read the data from memory and write it to the console.
   Console::Write( binReader->ReadString() );
   Console::WriteLine( binReader->ReadChars( (int)(memStream->Length - memStream->Position) ) );
}

using System;
using System.IO;

class BinaryRW
{
    static void Main()
    {
        char[] invalidPathChars = Path.InvalidPathChars;
        MemoryStream memStream = new MemoryStream();
        BinaryWriter binWriter = new BinaryWriter(memStream);

        // Write to memory.
        binWriter.Write("Invalid file path characters are: ");
        binWriter.Write(Path.InvalidPathChars);

        // Create the reader using the same MemoryStream
        // as used with the writer.
        BinaryReader binReader = new BinaryReader(memStream);

        // Set Position to the beginning of the stream.
        memStream.Position = 0;

        // Read the data from memory and write it to the console.
        Console.Write(binReader.ReadString());
        Console.WriteLine(binReader.ReadChars(
            (int)(memStream.Length - memStream.Position)));
    }
}

open System.IO

let invalidPathChars = Path.GetInvalidPathChars()
let memStream = new MemoryStream()
let binWriter = new BinaryWriter(memStream)

// Write to memory.
binWriter.Write "Invalid file path characters are: "
binWriter.Write invalidPathChars

// Create the reader using the same MemoryStream
// as used with the writer.
let binReader = new BinaryReader(memStream)

// Set Position to the beginning of the stream.
memStream.Position <- 0

// Read the data from memory and write it to the console.
printf $"{binReader.ReadString()}"
printfn $"{binReader.ReadChars(int (memStream.Length - memStream.Position))}"

Imports System.IO

Public Class BinaryRW

    Shared Sub Main()
    
        Dim invalidPathChars() As Char = Path.InvalidPathChars
        Dim memStream As new MemoryStream()
        Dim binWriter As New BinaryWriter(memStream)

        ' Write to memory.
        binWriter.Write("Invalid file path characters are: ")
        binWriter.Write(Path.InvalidPathChars)

        ' Create the reader using the same MemoryStream 
        ' as used with the writer.
        Dim binReader As New BinaryReader(memStream)

        ' Set Position to the beginning of the stream.
        memStream.Position = 0

        ' Read the data from memory and write it to the console.
        Console.Write(binReader.ReadString())
        Console.WriteLine(binReader.ReadChars( _
            CInt(memStream.Length - memStream.Position)))
    
    End Sub
End Class

Remarques

Le tableau suivant répertorie des exemples d’autres tâches d’E/S classiques ou connexes.

Voir aussi

• Encoding
• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(short value);

public virtual void Write (short value);

abstract member Write : int16 -> unit
override this.Write : int16 -> unit

Public Overridable Sub Write (value As Short)

Paramètres

Exceptions

Remarques

BinaryWriter stocke ce type de données au format little endian.

Le tableau suivant répertorie des exemples d’autres tâches d’E/S classiques ou connexes.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(Half value);

public virtual void Write (Half value);

abstract member Write : Half -> unit
override this.Write : Half -> unit

Public Overridable Sub Write (value As Half)

Paramètres

Exceptions

Exemples

L’exemple de code suivant montre comment lire et écrire Double des données en mémoire à l’aide des BinaryReader classes et BinaryWriter au-dessus de la MemoryStream classe . MemoryStream lit et écrit Byte uniquement des données.

using namespace System;
using namespace System::IO;
int main()
{
   int i;
   const int arrayLength = 1000;
   
   // Create random data to write to the stream.
   array<double>^dataArray = gcnew array<double>(arrayLength);
   Random^ randomGenerator = gcnew Random;
   for ( i = 0; i < arrayLength; i++ )
   {
      dataArray[ i ] = 100.1 * randomGenerator->NextDouble();

   }
   BinaryWriter^ binWriter = gcnew BinaryWriter( gcnew MemoryStream );
   try
   {
      
      // Write data to the stream.
      Console::WriteLine( "Writing data to the stream." );
      i = 0;
      for ( i = 0; i < arrayLength; i++ )
      {
         binWriter->Write( dataArray[ i ] );

      }
      
      // Create a reader using the stream from the writer.
      BinaryReader^ binReader = gcnew BinaryReader( binWriter->BaseStream );
      
      // Return to the beginning of the stream.
      binReader->BaseStream->Position = 0;
      try
      {
         
         // Read and verify the data.
         i = 0;
         Console::WriteLine( "Verifying the written data." );
         for ( i = 0; i < arrayLength; i++ )
         {
            if ( binReader->ReadDouble() != dataArray[ i ] )
            {
               Console::WriteLine( "Error writing data." );
               break;
            }

         }
         Console::WriteLine( "The data was written and verified." );
      }
      catch ( EndOfStreamException^ e ) 
      {
         Console::WriteLine( "Error writing data: {0}.", e->GetType()->Name );
      }

   }
   finally
   {
      binWriter->Close();
   }

}

using System;
using System.IO;

class BinaryRW
{
    static void Main()
    {
        int i;
        const int arrayLength = 1000;

        // Create random data to write to the stream.
        Random randomGenerator = new Random();
        double[] dataArray = new double[arrayLength];
        for(i = 0; i < arrayLength; i++)
        {
            dataArray[i] = 100.1 * randomGenerator.NextDouble();
        }

        using(BinaryWriter binWriter =
            new BinaryWriter(new MemoryStream()))
        {
            // Write the data to the stream.
            Console.WriteLine("Writing data to the stream.");
            for(i = 0; i < arrayLength; i++)
            {
                binWriter.Write(dataArray[i]);
            }

            // Create a reader using the stream from the writer.
            using(BinaryReader binReader =
                new BinaryReader(binWriter.BaseStream))
            {
                try
                {
                    // Return to the beginning of the stream.
                    binReader.BaseStream.Position = 0;

                    // Read and verify the data.
                    Console.WriteLine("Verifying the written data.");
                    for(i = 0; i < arrayLength; i++)
                    {
                        if(binReader.ReadDouble() != dataArray[i])
                        {
                            Console.WriteLine("Error writing data.");
                            break;
                        }
                    }
                    Console.WriteLine("The data was written " +
                        "and verified.");
                }
                catch(EndOfStreamException e)
                {
                    Console.WriteLine("Error writing data: {0}.",
                        e.GetType().Name);
                }
            }
        }
    }
}

open System
open System.IO

let arrayLength = 1000

// Create random data to write to the stream.
let randomGenerator = Random()
let dataArray = 
    Array.init arrayLength (fun _ -> 100.1 * randomGenerator.NextDouble())
do
    use binWriter = new BinaryWriter(new MemoryStream())
    // Write the data to the stream.
    printfn $"Writing data to the stream."
    for num in dataArray do
        binWriter.Write num

    // Create a reader using the stream from the writer.
    use binReader = new BinaryReader(binWriter.BaseStream)
    try
        // Return to the beginning of the stream.
        binReader.BaseStream.Position <- 0

        // Read and verify the data.
        printfn "Verifying the written data."
        for num in dataArray do
            if binReader.ReadDouble() <> num then
                printfn "Error writing data."
        printfn "The data was written and verified."
    with :? EndOfStreamException as e ->
        printfn $"Error writing data: {e.GetType().Name}."

Imports System.IO

Public Class BinaryRW

    Shared Sub Main()
    
        Dim i As Integer
        Const upperBound As Integer = 1000

        ' Create random data to write to the stream.
        Dim dataArray(upperBound) As Double
        Dim randomGenerator As New Random()
        For i = 0 To upperBound
            dataArray(i) = 100.1 * randomGenerator.NextDouble()
        Next i

        Dim binWriter As New BinaryWriter(New MemoryStream())
        Try

            ' Write data to the stream.
            Console.WriteLine("Writing data to the stream.")
            
            For i = 0 To upperBound
                binWriter.Write(dataArray(i))
            Next i

            ' Create a reader using the stream from the writer.
            Dim binReader As New BinaryReader(binWriter.BaseStream)

            ' Return to the beginning of the stream.
            binReader.BaseStream.Position = 0

            ' Read and verify the data.
            Try
                Console.WriteLine("Verifying the written data.")
                For i = 0 To upperBound
                    If binReader.ReadDouble() <> dataArray(i) Then
                        Console.WriteLine("Error writing data.")
                        Exit For
                    End If
                Next i
                Console.WriteLine("The data was written and verified.")
            Catch ex As EndOfStreamException
                Console.WriteLine("Error writing data: {0}.", _
                    ex.GetType().Name)
            End Try
        Finally
            binWriter.Close()
        End Try

    End Sub
End Class

Remarques

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(double value);

public virtual void Write (double value);

abstract member Write : double -> unit
override this.Write : double -> unit

Public Overridable Sub Write (value As Double)

Paramètres

Exceptions

Exemples

L’exemple de code suivant montre comment lire et écrire Double des données en mémoire à l’aide des BinaryReader classes et BinaryWriter au-dessus de la MemoryStream classe . MemoryStream lit et écrit Byte uniquement des données.

using namespace System;
using namespace System::IO;
int main()
{
   int i;
   const int arrayLength = 1000;
   
   // Create random data to write to the stream.
   array<double>^dataArray = gcnew array<double>(arrayLength);
   Random^ randomGenerator = gcnew Random;
   for ( i = 0; i < arrayLength; i++ )
   {
      dataArray[ i ] = 100.1 * randomGenerator->NextDouble();

   }
   BinaryWriter^ binWriter = gcnew BinaryWriter( gcnew MemoryStream );
   try
   {
      
      // Write data to the stream.
      Console::WriteLine( "Writing data to the stream." );
      i = 0;
      for ( i = 0; i < arrayLength; i++ )
      {
         binWriter->Write( dataArray[ i ] );

      }
      
      // Create a reader using the stream from the writer.
      BinaryReader^ binReader = gcnew BinaryReader( binWriter->BaseStream );
      
      // Return to the beginning of the stream.
      binReader->BaseStream->Position = 0;
      try
      {
         
         // Read and verify the data.
         i = 0;
         Console::WriteLine( "Verifying the written data." );
         for ( i = 0; i < arrayLength; i++ )
         {
            if ( binReader->ReadDouble() != dataArray[ i ] )
            {
               Console::WriteLine( "Error writing data." );
               break;
            }

         }
         Console::WriteLine( "The data was written and verified." );
      }
      catch ( EndOfStreamException^ e ) 
      {
         Console::WriteLine( "Error writing data: {0}.", e->GetType()->Name );
      }

   }
   finally
   {
      binWriter->Close();
   }

}

using System;
using System.IO;

class BinaryRW
{
    static void Main()
    {
        int i;
        const int arrayLength = 1000;

        // Create random data to write to the stream.
        Random randomGenerator = new Random();
        double[] dataArray = new double[arrayLength];
        for(i = 0; i < arrayLength; i++)
        {
            dataArray[i] = 100.1 * randomGenerator.NextDouble();
        }

        using(BinaryWriter binWriter =
            new BinaryWriter(new MemoryStream()))
        {
            // Write the data to the stream.
            Console.WriteLine("Writing data to the stream.");
            for(i = 0; i < arrayLength; i++)
            {
                binWriter.Write(dataArray[i]);
            }

            // Create a reader using the stream from the writer.
            using(BinaryReader binReader =
                new BinaryReader(binWriter.BaseStream))
            {
                try
                {
                    // Return to the beginning of the stream.
                    binReader.BaseStream.Position = 0;

                    // Read and verify the data.
                    Console.WriteLine("Verifying the written data.");
                    for(i = 0; i < arrayLength; i++)
                    {
                        if(binReader.ReadDouble() != dataArray[i])
                        {
                            Console.WriteLine("Error writing data.");
                            break;
                        }
                    }
                    Console.WriteLine("The data was written " +
                        "and verified.");
                }
                catch(EndOfStreamException e)
                {
                    Console.WriteLine("Error writing data: {0}.",
                        e.GetType().Name);
                }
            }
        }
    }
}

open System
open System.IO

let arrayLength = 1000

// Create random data to write to the stream.
let randomGenerator = Random()
let dataArray = 
    Array.init arrayLength (fun _ -> 100.1 * randomGenerator.NextDouble())
do
    use binWriter = new BinaryWriter(new MemoryStream())
    // Write the data to the stream.
    printfn $"Writing data to the stream."
    for num in dataArray do
        binWriter.Write num

    // Create a reader using the stream from the writer.
    use binReader = new BinaryReader(binWriter.BaseStream)
    try
        // Return to the beginning of the stream.
        binReader.BaseStream.Position <- 0

        // Read and verify the data.
        printfn "Verifying the written data."
        for num in dataArray do
            if binReader.ReadDouble() <> num then
                printfn "Error writing data."
        printfn "The data was written and verified."
    with :? EndOfStreamException as e ->
        printfn $"Error writing data: {e.GetType().Name}."

Imports System.IO

Public Class BinaryRW

    Shared Sub Main()
    
        Dim i As Integer
        Const upperBound As Integer = 1000

        ' Create random data to write to the stream.
        Dim dataArray(upperBound) As Double
        Dim randomGenerator As New Random()
        For i = 0 To upperBound
            dataArray(i) = 100.1 * randomGenerator.NextDouble()
        Next i

        Dim binWriter As New BinaryWriter(New MemoryStream())
        Try

            ' Write data to the stream.
            Console.WriteLine("Writing data to the stream.")
            
            For i = 0 To upperBound
                binWriter.Write(dataArray(i))
            Next i

            ' Create a reader using the stream from the writer.
            Dim binReader As New BinaryReader(binWriter.BaseStream)

            ' Return to the beginning of the stream.
            binReader.BaseStream.Position = 0

            ' Read and verify the data.
            Try
                Console.WriteLine("Verifying the written data.")
                For i = 0 To upperBound
                    If binReader.ReadDouble() <> dataArray(i) Then
                        Console.WriteLine("Error writing data.")
                        Exit For
                    End If
                Next i
                Console.WriteLine("The data was written and verified.")
            Catch ex As EndOfStreamException
                Console.WriteLine("Error writing data: {0}.", _
                    ex.GetType().Name)
            End Try
        Finally
            binWriter.Close()
        End Try

    End Sub
End Class

Remarques

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(System::Decimal value);

public virtual void Write (decimal value);

abstract member Write : decimal -> unit
override this.Write : decimal -> unit

Public Overridable Sub Write (value As Decimal)

Paramètres

Exceptions

Remarques

Le tableau suivant répertorie des exemples d’autres tâches d’E/S classiques ou connexes.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(char ch);

public virtual void Write (char ch);

abstract member Write : char -> unit
override this.Write : char -> unit

Public Overridable Sub Write (ch As Char)

Paramètres

Exceptions

Exemples

L’exemple de code suivant montre comment lire et écrire des données à l’aide de la mémoire comme magasin de stockage.

using namespace System;
using namespace System::IO;
int main()
{
   int i;
   array<Char>^invalidPathChars = Path::InvalidPathChars;
   MemoryStream^ memStream = gcnew MemoryStream;
   BinaryWriter^ binWriter = gcnew BinaryWriter( memStream );
   
   // Write to memory.
   binWriter->Write( "Invalid file path characters are: " );
   for ( i = 0; i < invalidPathChars->Length; i++ )
   {
      binWriter->Write( invalidPathChars[ i ] );

   }
   
   // Create the reader using the same MemoryStream 
   // as used with the writer.
   BinaryReader^ binReader = gcnew BinaryReader( memStream );
   
   // Set Position to the beginning of the stream.
   binReader->BaseStream->Position = 0;
   
   // Read the data from memory and write it to the console.
   Console::Write( binReader->ReadString() );
   array<Char>^memoryData = gcnew array<Char>(memStream->Length - memStream->Position);
   for ( i = 0; i < memoryData->Length; i++ )
   {
      memoryData[ i ] = binReader->ReadChar();

   }
   Console::WriteLine( memoryData );
}

using System;
using System.IO;

class BinaryRW
{
    static void Main()
    {
        int i = 0;
        char[] invalidPathChars = Path.InvalidPathChars;
        MemoryStream memStream = new MemoryStream();
        BinaryWriter binWriter = new BinaryWriter(memStream);

        // Write to memory.
        binWriter.Write("Invalid file path characters are: ");
        for(i = 0; i < invalidPathChars.Length; i++)
        {
            binWriter.Write(invalidPathChars[i]);
        }

        // Create the reader using the same MemoryStream
        // as used with the writer.
        BinaryReader binReader = new BinaryReader(memStream);

        // Set Position to the beginning of the stream.
        memStream.Position = 0;

        // Read the data from memory and write it to the console.
        Console.Write(binReader.ReadString());
        char[] memoryData =
            new char[memStream.Length - memStream.Position];
        for(i = 0; i < memoryData.Length; i++)
        {
            memoryData[i] = binReader.ReadChar();
        }
        Console.WriteLine(memoryData);
    }
}

open System.IO

let invalidPathChars = Path.GetInvalidPathChars()
let memStream = new MemoryStream()
let binWriter = new BinaryWriter(memStream)

// Write to memory.
binWriter.Write "Invalid file path characters are: "
for i = 0 to invalidPathChars.Length - 1 do
    binWriter.Write invalidPathChars[i]

// Create the reader using the same MemoryStream
// as used with the writer.
let binReader = new BinaryReader(memStream)

// Set Position to the beginning of the stream.
memStream.Position <- 0

// Read the data from memory and write it to the console.
printf $"{binReader.ReadString()}"
let memoryData = Array.zeroCreate<char> (int (memStream.Length - memStream.Position))
for i = 0 to memoryData.Length - 1 do
    memoryData[i] <- binReader.ReadChar()
printfn $"{memoryData}"

Imports System.IO

Public Class BinaryRW

    Shared Sub Main()
    
        Dim i As Integer = 0
        Dim invalidPathChars() As Char = Path.InvalidPathChars
        Dim memStream As new MemoryStream()
        Dim binWriter As New BinaryWriter(memStream)

        ' Write to memory.
        binWriter.Write("Invalid file path characters are: ")
        For i = 0 To invalidPathChars.Length - 1
            binWriter.Write(invalidPathChars(i))
        Next i

        ' Create the reader using the same MemoryStream 
        ' as used with the writer.
        Dim binReader As New BinaryReader(memStream)

        ' Set Position to the beginning of the stream.
        memStream.Position = 0

        ' Read the data from memory and write it to the console.
        Console.Write(binReader.ReadString())
        Dim memoryData( _
            CInt(memStream.Length - memStream.Position) - 1) As Char
        For i = 0 To memoryData.Length - 1
            memoryData(i) = binReader.ReadChar()
        Next i
        Console.WriteLine(memoryData)
    
    End Sub
End Class

Remarques

En raison de conflits de mise en forme des données, l’utilisation de cette méthode avec les encodages suivants n’est pas recommandée :

• UTF-7

• ISO-2022-JP

• ISCII

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Les caractères de substitution Unicode doivent être écrits sous forme de paires dans le même appel, et non individuellement. Si vous avez besoin de prendre en charge les paires de substitution dans votre application, envisagez d’utiliser un tableau de caractères et la surcharge de méthode Write .

Voir aussi

• Encoding
• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(cli::array <System::Byte> ^ buffer);

public virtual void Write (byte[] buffer);

abstract member Write : byte[] -> unit
override this.Write : byte[] -> unit

Public Overridable Sub Write (buffer As Byte())

Paramètres

Exceptions

Exemples

L’exemple de code suivant montre comment écrire des données binaires à l’aide de la mémoire comme magasin de stockage, puis vérifier que les données ont été écrites correctement.

using namespace System;
using namespace System::IO;
int main()
{
   const int arrayLength = 1000;
   
   // Create random data to write to the stream.
   array<Byte>^dataArray = gcnew array<Byte>(arrayLength);
   (gcnew Random)->NextBytes( dataArray );
   BinaryWriter^ binWriter = gcnew BinaryWriter( gcnew MemoryStream );
   
   // Write the data to the stream.
   Console::WriteLine(  "Writing the data." );
   binWriter->Write( dataArray );
   
   // Create the reader using the stream from the writer.
   BinaryReader^ binReader = gcnew BinaryReader( binWriter->BaseStream );
   
   // Set the stream position to the beginning of the stream.
   binReader->BaseStream->Position = 0;
   
   // Read and verify the data.
   array<Byte>^verifyArray = binReader->ReadBytes( arrayLength );
   if ( verifyArray->Length != arrayLength )
   {
      Console::WriteLine( "Error writing the data." );
      return  -1;
   }

   for ( int i = 0; i < arrayLength; i++ )
   {
      if ( verifyArray[ i ] != dataArray[ i ] )
      {
         Console::WriteLine( "Error writing the data." );
         return  -1;
      }

   }
   Console::WriteLine( "The data was written and verified." );
}

using System;
using System.IO;

class BinaryRW
{
    static void Main()
    {
        const int arrayLength = 1000;

        // Create random data to write to the stream.
        byte[] dataArray = new byte[arrayLength];
        new Random().NextBytes(dataArray);

        BinaryWriter binWriter = new BinaryWriter(new MemoryStream());

        // Write the data to the stream.
        Console.WriteLine("Writing the data.");
        binWriter.Write(dataArray);

        // Create the reader using the stream from the writer.
        BinaryReader binReader =
            new BinaryReader(binWriter.BaseStream);

        // Set Position to the beginning of the stream.
        binReader.BaseStream.Position = 0;

        // Read and verify the data.
        byte[] verifyArray = binReader.ReadBytes(arrayLength);
        if(verifyArray.Length != arrayLength)
        {
            Console.WriteLine("Error writing the data.");
            return;
        }
        for(int i = 0; i < arrayLength; i++)
        {
            if(verifyArray[i] != dataArray[i])
            {
                Console.WriteLine("Error writing the data.");
                return;
            }
        }
        Console.WriteLine("The data was written and verified.");
    }
}

open System
open System.IO

let arrayLength = 1000

// Create random data to write to the stream.
let dataArray = Array.zeroCreate<byte> arrayLength
Random().NextBytes dataArray

let binWriter = new BinaryWriter(new MemoryStream())

// Write the data to the stream.ch
printfn "Writing the data."
binWriter.Write dataArray

// Create the reader using the stream from the writer.
let binReader = new BinaryReader(binWriter.BaseStream)

// Set Position to the beginning of the stream.
binReader.BaseStream.Position <- 0

// Read and verify the data.
let verifyArray = binReader.ReadBytes arrayLength
if verifyArray.Length <> arrayLength then
    printfn "Error writing the data."
else
    let mutable failed = false
    for i = 0 to arrayLength - 1 do
        if verifyArray[i] <> dataArray[i] then
            printfn "Error writing the data."
            failed <- true
    if not failed then
        printfn "The data was written and verified."

Imports System.IO

Public Class BinaryRW

    Shared Sub Main()
    
        Const upperBound As Integer = 1000

        ' Create random data to write to the stream.
        Dim dataArray(upperBound) As Byte
        Dim randomGenerator As New Random
        randomGenerator.NextBytes(dataArray)

        Dim binWriter As New BinaryWriter(New MemoryStream())

        ' Write the data to the stream.
        Console.WriteLine("Writing the data.")
        binWriter.Write(dataArray)

        ' Create the reader using the stream from the writer.
        Dim binReader As New BinaryReader(binWriter.BaseStream)

        ' Set the stream position to the beginning of the stream.
        binReader.BaseStream.Position = 0

        ' Read and verify the data.
        Dim verifyArray() As Byte = _
            binReader.ReadBytes(dataArray.Length)
        If verifyArray.Length <> dataArray.Length Then
            Console.WriteLine("Error writing the data.")
            Return
        End If
        For i As Integer = 0 To upperBound
            If verifyArray(i) <> dataArray(i) Then
                Console.WriteLine("Error writing the data.")
                Return
            End If
        Next i
        Console.WriteLine("The data was written and verified.")
    
    End Sub
End Class

Remarques

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(System::Byte value);

public virtual void Write (byte value);

abstract member Write : byte -> unit
override this.Write : byte -> unit

Public Overridable Sub Write (value As Byte)

Paramètres

Exceptions

Exemples

L’exemple de code suivant montre comment écrire des données binaires à l’aide de la mémoire comme magasin de stockage, puis vérifier que les données ont été écrites correctement.

using namespace System;
using namespace System::IO;
int main()
{
   int i = 0;
   
   // Create random data to write to the stream.
   array<Byte>^writeArray = gcnew array<Byte>(1000);
   (gcnew Random)->NextBytes( writeArray );
   BinaryWriter^ binWriter = gcnew BinaryWriter( gcnew MemoryStream );
   BinaryReader^ binReader = gcnew BinaryReader( binWriter->BaseStream );
   try
   {
      
      // Write the data to the stream.
      Console::WriteLine( "Writing the data." );
      for ( i = 0; i < writeArray->Length; i++ )
      {
         binWriter->Write( writeArray[ i ] );

      }
      
      // Set the stream position to the beginning of the stream.
      binReader->BaseStream->Position = 0;
      
      // Read and verify the data from the stream.
      for ( i = 0; i < writeArray->Length; i++ )
      {
         if ( binReader->ReadByte() != writeArray[ i ] )
         {
            Console::WriteLine( "Error writing the data." );
            return  -1;
         }

      }
      Console::WriteLine( "The data was written and verified." );
   }
   // Catch the EndOfStreamException and write an error message.
   catch ( EndOfStreamException^ e ) 
   {
      Console::WriteLine( "Error writing the data.\n{0}", e->GetType()->Name );
   }

}

using System;
using System.IO;

class BinaryRW
{
    static void Main()
    {
        int i = 0;

        // Create random data to write to the stream.
        byte[] writeArray = new byte[1000];
        new Random().NextBytes(writeArray);

        BinaryWriter binWriter = new BinaryWriter(new MemoryStream());
        BinaryReader binReader =
            new BinaryReader(binWriter.BaseStream);

        try
        {
            // Write the data to the stream.
            Console.WriteLine("Writing the data.");
            for(i = 0; i < writeArray.Length; i++)
            {
                binWriter.Write(writeArray[i]);
            }

            // Set the stream position to the beginning of the stream.
            binReader.BaseStream.Position = 0;

            // Read and verify the data from the stream.
            for(i = 0; i < writeArray.Length; i++)
            {
                if(binReader.ReadByte() != writeArray[i])
                {
                    Console.WriteLine("Error writing the data.");
                    return;
                }
            }
            Console.WriteLine("The data was written and verified.");
        }

        // Catch the EndOfStreamException and write an error message.
        catch(EndOfStreamException e)
        {
            Console.WriteLine("Error writing the data.\n{0}",
                e.GetType().Name);
        }
    }
}

open System
open System.IO

// Create random data to write to the stream.
let writeArray = Array.zeroCreate<byte> 1000
Random().NextBytes writeArray

let binWriter = new BinaryWriter(new MemoryStream())
let binReader = new BinaryReader(binWriter.BaseStream)

try
    // Write the data to the stream.
    printfn "Writing the data."
    for i = 0 to writeArray.Length - 1 do
        binWriter.Write writeArray[i]

    // Set the stream position to the beginning of the stream.
    binReader.BaseStream.Position <- 0

    let mutable failed = false
    // Read and verify the data from the stream.
    for i = 0 to writeArray.Length - 1 do
        if binReader.ReadByte() <> writeArray[i] then
            printfn "Error writing the data."
            failed <- true
    if not failed then
        printfn "The data was written and verified."

// Catch the EndOfStreamException and write an error message.
with :? EndOfStreamException as e ->
    printfn $"Error writing the data.\n{e.GetType().Name}"

Imports System.IO

Public Class BinaryRW

    Shared Sub Main()
    
        Dim i As Integer = 0

        ' Create random data to write to the stream.
        Dim writeArray(1000) As Byte
        Dim randomGenerator As New Random()
        randomGenerator.NextBytes(writeArray)

        Dim binWriter As New BinaryWriter(New MemoryStream())
        Dim binReader As New BinaryReader(binWriter.BaseStream)

        Try
        
            ' Write the data to the stream.
            Console.WriteLine("Writing the data.")
            For i = 0 To writeArray.Length - 1
                binWriter.Write(writeArray(i))
            Next i

            ' Set the stream position to the beginning of the stream.
            binReader.BaseStream.Position = 0

            ' Read and verify the data from the stream.
            For i = 0 To writeArray.Length - 1
                If binReader.ReadByte() <> writeArray(i) Then
                    Console.WriteLine("Error writing the data.")
                    Return
                End If
            Next i
            Console.WriteLine("The data was written and verified.")

        ' Catch the EndOfStreamException and write an error message.
        Catch ex As EndOfStreamException
            Console.WriteLine("Error writing the data: {0}", _
                ex.GetType().Name)
        End Try
    
    End Sub
End Class

Remarques

En raison de conflits de mise en forme des données, l’utilisation de cette méthode avec les encodages suivants n’est pas recommandée :

• UTF-7

• ISO-2022-JP

• ISCII

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(bool value);

public virtual void Write (bool value);

abstract member Write : bool -> unit
override this.Write : bool -> unit

Public Overridable Sub Write (value As Boolean)

Paramètres

Exceptions

Exemples

L’exemple de code suivant montre comment stocker et récupérer des paramètres d’application dans un fichier.

using System;
using System.IO;
using System.Text;

class ConsoleApplication
{
    const string fileName = "AppSettings.dat";

    static void Main()
    {
        WriteDefaultValues();
        DisplayValues();
    }

    public static void WriteDefaultValues()
    {
        using (var stream = File.Open(fileName, FileMode.Create))
        {
            using (var writer = new BinaryWriter(stream, Encoding.UTF8, false))
            {
                writer.Write(1.250F);
                writer.Write(@"c:\Temp");
                writer.Write(10);
                writer.Write(true);
            }
        }
    }

    public static void DisplayValues()
    {
        float aspectRatio;
        string tempDirectory;
        int autoSaveTime;
        bool showStatusBar;

        if (File.Exists(fileName))
        {
            using (var stream = File.Open(fileName, FileMode.Open))
            {
                using (var reader = new BinaryReader(stream, Encoding.UTF8, false))
                {
                    aspectRatio = reader.ReadSingle();
                    tempDirectory = reader.ReadString();
                    autoSaveTime = reader.ReadInt32();
                    showStatusBar = reader.ReadBoolean();
                }
            }

            Console.WriteLine("Aspect ratio set to: " + aspectRatio);
            Console.WriteLine("Temp directory is: " + tempDirectory);
            Console.WriteLine("Auto save time set to: " + autoSaveTime);
            Console.WriteLine("Show status bar: " + showStatusBar);
        }
    }
}

open System.IO
open System.Text

let fileName = "AppSettings.dat"

let writeDefaultValues () =
    use stream = File.Open(fileName, FileMode.Create)
    use writer = new BinaryWriter(stream, Encoding.UTF8, false)
    writer.Write 1.250F
    writer.Write @"c:\Temp"
    writer.Write 10
    writer.Write true

let displayValues () =
    if File.Exists fileName then
        use stream = File.Open(fileName, FileMode.Open)
        use reader = new BinaryReader(stream, Encoding.UTF8, false)
        let aspectRatio = reader.ReadSingle()
        let tempDirectory = reader.ReadString()
        let autoSaveTime = reader.ReadInt32()
        let showStatusBar = reader.ReadBoolean()

        printfn $"Aspect ratio set to: {aspectRatio}"
        printfn $"Temp directory is: {tempDirectory}"
        printfn $"Auto save time set to: {autoSaveTime}"
        printfn $"Show status bar: {showStatusBar}"

writeDefaultValues ()
displayValues ()

Imports System.IO

Module Module1
    Const fileName As String = "AppSettings.dat"

    Sub Main()
        WriteDefaultValues()
        DisplayValues()
    End Sub

    Sub WriteDefaultValues()
        Using writer As BinaryWriter = New BinaryWriter(File.Open(fileName, FileMode.Create))
            writer.Write(1.25F)
            writer.Write("c:\Temp")
            writer.Write(10)
            writer.Write(True)
        End Using
    End Sub

    Sub DisplayValues()
        Dim aspectRatio As Single
        Dim tempDirectory As String
        Dim autoSaveTime As Integer
        Dim showStatusBar As Boolean

        If (File.Exists(fileName)) Then

            Using reader As BinaryReader = New BinaryReader(File.Open(fileName, FileMode.Open))
                aspectRatio = reader.ReadSingle()
                tempDirectory = reader.ReadString()
                autoSaveTime = reader.ReadInt32()
                showStatusBar = reader.ReadBoolean()
            End Using

            Console.WriteLine("Aspect ratio set to: " & aspectRatio)
            Console.WriteLine("Temp directory is: " & tempDirectory)
            Console.WriteLine("Auto save time set to: " & autoSaveTime)
            Console.WriteLine("Show status bar: " & showStatusBar)
        End If
    End Sub

End Module

Remarques

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

Source:

BinaryWriter.cs

public:
 virtual void Write(int value);

public virtual void Write (int value);

abstract member Write : int -> unit
override this.Write : int -> unit

Public Overridable Sub Write (value As Integer)

Paramètres

Exceptions

Exemples

L’exemple de code suivant montre comment stocker et récupérer des paramètres d’application dans un fichier.

using System;
using System.IO;
using System.Text;

class ConsoleApplication
{
    const string fileName = "AppSettings.dat";

    static void Main()
    {
        WriteDefaultValues();
        DisplayValues();
    }

    public static void WriteDefaultValues()
    {
        using (var stream = File.Open(fileName, FileMode.Create))
        {
            using (var writer = new BinaryWriter(stream, Encoding.UTF8, false))
            {
                writer.Write(1.250F);
                writer.Write(@"c:\Temp");
                writer.Write(10);
                writer.Write(true);
            }
        }
    }

    public static void DisplayValues()
    {
        float aspectRatio;
        string tempDirectory;
        int autoSaveTime;
        bool showStatusBar;

        if (File.Exists(fileName))
        {
            using (var stream = File.Open(fileName, FileMode.Open))
            {
                using (var reader = new BinaryReader(stream, Encoding.UTF8, false))
                {
                    aspectRatio = reader.ReadSingle();
                    tempDirectory = reader.ReadString();
                    autoSaveTime = reader.ReadInt32();
                    showStatusBar = reader.ReadBoolean();
                }
            }

            Console.WriteLine("Aspect ratio set to: " + aspectRatio);
            Console.WriteLine("Temp directory is: " + tempDirectory);
            Console.WriteLine("Auto save time set to: " + autoSaveTime);
            Console.WriteLine("Show status bar: " + showStatusBar);
        }
    }
}

open System.IO
open System.Text

let fileName = "AppSettings.dat"

let writeDefaultValues () =
    use stream = File.Open(fileName, FileMode.Create)
    use writer = new BinaryWriter(stream, Encoding.UTF8, false)
    writer.Write 1.250F
    writer.Write @"c:\Temp"
    writer.Write 10
    writer.Write true

let displayValues () =
    if File.Exists fileName then
        use stream = File.Open(fileName, FileMode.Open)
        use reader = new BinaryReader(stream, Encoding.UTF8, false)
        let aspectRatio = reader.ReadSingle()
        let tempDirectory = reader.ReadString()
        let autoSaveTime = reader.ReadInt32()
        let showStatusBar = reader.ReadBoolean()

        printfn $"Aspect ratio set to: {aspectRatio}"
        printfn $"Temp directory is: {tempDirectory}"
        printfn $"Auto save time set to: {autoSaveTime}"
        printfn $"Show status bar: {showStatusBar}"

writeDefaultValues ()
displayValues ()

Imports System.IO

Module Module1
    Const fileName As String = "AppSettings.dat"

    Sub Main()
        WriteDefaultValues()
        DisplayValues()
    End Sub

    Sub WriteDefaultValues()
        Using writer As BinaryWriter = New BinaryWriter(File.Open(fileName, FileMode.Create))
            writer.Write(1.25F)
            writer.Write("c:\Temp")
            writer.Write(10)
            writer.Write(True)
        End Using
    End Sub

    Sub DisplayValues()
        Dim aspectRatio As Single
        Dim tempDirectory As String
        Dim autoSaveTime As Integer
        Dim showStatusBar As Boolean

        If (File.Exists(fileName)) Then

            Using reader As BinaryReader = New BinaryReader(File.Open(fileName, FileMode.Open))
                aspectRatio = reader.ReadSingle()
                tempDirectory = reader.ReadString()
                autoSaveTime = reader.ReadInt32()
                showStatusBar = reader.ReadBoolean()
            End Using

            Console.WriteLine("Aspect ratio set to: " & aspectRatio)
            Console.WriteLine("Temp directory is: " & tempDirectory)
            Console.WriteLine("Auto save time set to: " & autoSaveTime)
            Console.WriteLine("Show status bar: " & showStatusBar)
        End If
    End Sub

End Module

Remarques

BinaryWriter stocke ce type de données au format little endian.

Pour obtenir la liste des tâches d’E/S courantes, consultez Tâches courantes d’E/S.

Voir aussi

• Fichier et flux de données E/S
• Procédure : lire le texte d’un fichier
• Procédure : écrire du texte dans un fichier