Socket Constructeurs

Source:

Socket.cs

Source:

Socket.cs

Source:

Socket.cs

public:
 Socket(System::Net::Sockets::SafeSocketHandle ^ handle);

public Socket (System.Net.Sockets.SafeSocketHandle handle);

new System.Net.Sockets.Socket : System.Net.Sockets.SafeSocketHandle -> System.Net.Sockets.Socket

Public Sub New (handle As SafeSocketHandle)

Paramètres

Exceptions

Remarques

Cette méthode remplit le Socket instance avec les données collectées à partir du fourni SafeSocketHandle. Différents systèmes d’exploitation offrent différents niveaux de prise en charge pour interroger un handle de socket ou un descripteur de fichier pour ses propriétés et sa configuration. Certaines API publiques sur le instance résultant Socket peuvent différer en fonction du système d’exploitation, telles que ProtocolType et Blocking.

Source:

Socket.cs

Source:

Socket.cs

Source:

Socket.cs

public:
 Socket(System::Net::Sockets::SocketInformation socketInformation);

[System.Runtime.Versioning.SupportedOSPlatform("windows")]
public Socket (System.Net.Sockets.SocketInformation socketInformation);

public Socket (System.Net.Sockets.SocketInformation socketInformation);

[<System.Runtime.Versioning.SupportedOSPlatform("windows")>]
new System.Net.Sockets.Socket : System.Net.Sockets.SocketInformation -> System.Net.Sockets.Socket

new System.Net.Sockets.Socket : System.Net.Sockets.SocketInformation -> System.Net.Sockets.Socket

Public Sub New (socketInformation As SocketInformation)

Paramètres

Attributs

SupportedOSPlatformAttribute

Remarques

Si vous appelez le Socket constructeur plusieurs fois avec le même tableau d’octets que l’argument pour chaque appel, vous allez créer plusieurs s managés Socketavec le même socket sous-jacent. Cette pratique est fortement déconseillée.

Source:

Socket.cs

Source:

Socket.cs

Source:

Socket.cs

public:
 Socket(System::Net::Sockets::SocketType socketType, System::Net::Sockets::ProtocolType protocolType);

public Socket (System.Net.Sockets.SocketType socketType, System.Net.Sockets.ProtocolType protocolType);

new System.Net.Sockets.Socket : System.Net.Sockets.SocketType * System.Net.Sockets.ProtocolType -> System.Net.Sockets.Socket

Public Sub New (socketType As SocketType, protocolType As ProtocolType)

Paramètres

Exceptions

Remarques

Le socketType paramètre spécifie le type de la Socket classe et le protocolType paramètre spécifie le protocole utilisé par Socket. Les deux paramètres ne sont pas indépendants. Souvent, le Socket type est implicite dans le protocole. Si la combinaison de Socket type et de type de protocole entraîne un non valide Socket, ce constructeur lève un SocketException.

Source:

Socket.cs

Source:

Socket.cs

Source:

Socket.cs

public:
 Socket(System::Net::Sockets::AddressFamily addressFamily, System::Net::Sockets::SocketType socketType, System::Net::Sockets::ProtocolType protocolType);

public Socket (System.Net.Sockets.AddressFamily addressFamily, System.Net.Sockets.SocketType socketType, System.Net.Sockets.ProtocolType protocolType);

new System.Net.Sockets.Socket : System.Net.Sockets.AddressFamily * System.Net.Sockets.SocketType * System.Net.Sockets.ProtocolType -> System.Net.Sockets.Socket

Public Sub New (addressFamily As AddressFamily, socketType As SocketType, protocolType As ProtocolType)

Paramètres

Exceptions

Exemples

L’exemple de code suivant montre comment créer une instance de la Socket classe.

#using <System.dll>

using namespace System;
using namespace System::Text;
using namespace System::IO;
using namespace System::Net;
using namespace System::Net::Sockets;
String^ DoSocketGet( String^ server )
{
   
   //Set up variables and String to write to the server.
   Encoding^ ASCII = Encoding::ASCII;
   String^ Get =  "GET / HTTP/1.1\r\nHost: ";
   Get->Concat( server,  "\r\nConnection: Close\r\n\r\n" );
   array<Byte>^ByteGet = ASCII->GetBytes( Get );
   array<Byte>^RecvBytes = gcnew array<Byte>(256);
   String^ strRetPage = nullptr;
   
   // IPAddress and IPEndPoint represent the endpoint that will
   //   receive the request.
   // Get first IPAddress in list return by DNS.
   try
   {
      
      // Define those variables to be evaluated in the next for loop and 
      // then used to connect to the server. These variables are defined
      // outside the for loop to make them accessible there after.
      Socket^ s = nullptr;
      IPEndPoint^ hostEndPoint;
      IPAddress^ hostAddress = nullptr;
      int conPort = 80;
      
      // Get DNS host information.
      IPHostEntry^ hostInfo = Dns::Resolve( server );
      
      // Get the DNS IP addresses associated with the host.
      array<IPAddress^>^IPaddresses = hostInfo->AddressList;
      
      // Evaluate the socket and receiving host IPAddress and IPEndPoint. 
      for ( int index = 0; index < IPaddresses->Length; index++ )
      {
         hostAddress = IPaddresses[ index ];
         hostEndPoint = gcnew IPEndPoint( hostAddress,conPort );
         
         // Creates the Socket to send data over a TCP connection.
         s = gcnew Socket( AddressFamily::InterNetwork,SocketType::Stream,ProtocolType::Tcp );
         
         // Connect to the host using its IPEndPoint.
         s->Connect( hostEndPoint );
         if (  !s->Connected )
         {
            
            // Connection failed, try next IPaddress.
            strRetPage =  "Unable to connect to host";
            s = nullptr;
            continue;
         }

         
         // Sent the GET request to the host.
         s->Send( ByteGet, ByteGet->Length, SocketFlags::None );
         

      }
      
      // Receive the host home page content and loop until all the data is received.
      Int32 bytes = s->Receive( RecvBytes, RecvBytes->Length, SocketFlags::None );
      strRetPage =  "Default HTML page on ";
      strRetPage->Concat( server,  ":\r\n", ASCII->GetString( RecvBytes, 0, bytes ) );
      while ( bytes > 0 )
      {
         bytes = s->Receive( RecvBytes, RecvBytes->Length, SocketFlags::None );
         strRetPage->Concat( ASCII->GetString( RecvBytes, 0, bytes ) );
      }

      
   }
   catch ( SocketException^ e ) 
   {
      Console::WriteLine(  "SocketException caught!!!" );
      Console::Write(  "Source : " );
      Console::WriteLine( e->Source );
      Console::Write(  "Message : " );
      Console::WriteLine( e->Message );
   }
   catch ( ArgumentNullException^ e ) 
   {
      Console::WriteLine(  "ArgumentNULLException caught!!!" );
      Console::Write(  "Source : " );
      Console::WriteLine( e->Source );
      Console::Write(  "Message : " );
      Console::WriteLine( e->Message );
   }
   catch ( NullReferenceException^ e ) 
   {
      Console::WriteLine(  "NULLReferenceException caught!!!" );
      Console::Write(  "Source : " );
      Console::WriteLine( e->Source );
      Console::Write(  "Message : " );
      Console::WriteLine( e->Message );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine(  "Exception caught!!!" );
      Console::Write(  "Source : " );
      Console::WriteLine( e->Source );
      Console::Write(  "Message : " );
      Console::WriteLine( e->Message );
   }

   return strRetPage;
}

int main()
{
   Console::WriteLine( DoSocketGet(  "localhost" ) );
}

using System;
using System.Text;
using System.IO;
using System.Net;
using System.Net.Sockets;

public class Sample
{

  public static string DoSocketGet(string server)
  {
    //Set up variables and String to write to the server.
    Encoding ASCII = Encoding.ASCII;
    string Get = "GET / HTTP/1.1\r\nHost: " + server +
                 "\r\nConnection: Close\r\n\r\n";
    Byte[] ByteGet = ASCII.GetBytes(Get);
    Byte[] RecvBytes = new Byte[256];
    String strRetPage = null;

    // IPAddress and IPEndPoint represent the endpoint that will
    //   receive the request.
    // Get first IPAddress in list return by DNS.

    try
    {

      // Define those variables to be evaluated in the next for loop and
      // then used to connect to the server. These variables are defined
      // outside the for loop to make them accessible there after.
      Socket s = null;
      IPEndPoint hostEndPoint;
      IPAddress hostAddress = null;
      int conPort = 80;

      // Get DNS host information.
      IPHostEntry hostInfo = Dns.GetHostEntry(server);
      // Get the DNS IP addresses associated with the host.
      IPAddress[] IPaddresses = hostInfo.AddressList;

      // Evaluate the socket and receiving host IPAddress and IPEndPoint.
      for (int index=0; index<IPaddresses.Length; index++)
      {
        hostAddress = IPaddresses[index];
        hostEndPoint = new IPEndPoint(hostAddress, conPort);


        // Creates the Socket to send data over a TCP connection.
        s = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp );


        // Connect to the host using its IPEndPoint.
        s.Connect(hostEndPoint);

        if (!s.Connected)
        {
          // Connection failed, try next IPaddress.
          strRetPage = "Unable to connect to host";
          s = null;
          continue;
        }

        // Sent the GET request to the host.
        s.Send(ByteGet, ByteGet.Length, 0);

      } // End of the for loop.


      // Receive the host home page content and loop until all the data is received.
      Int32 bytes = s.Receive(RecvBytes, RecvBytes.Length, 0);
      strRetPage = "Default HTML page on " + server + ":\r\n";
      strRetPage = strRetPage + ASCII.GetString(RecvBytes, 0, bytes);

      while (bytes > 0)
      {
        bytes = s.Receive(RecvBytes, RecvBytes.Length, 0);
        strRetPage = strRetPage + ASCII.GetString(RecvBytes, 0, bytes);
      }

    } // End of the try block.

    catch(SocketException e)
    {
      Console.WriteLine("SocketException caught!!!");
      Console.WriteLine("Source : " + e.Source);
      Console.WriteLine("Message : " + e.Message);
    }
    catch(ArgumentNullException e)
    {
      Console.WriteLine("ArgumentNullException caught!!!");
      Console.WriteLine("Source : " + e.Source);
      Console.WriteLine("Message : " + e.Message);
    }
    catch(NullReferenceException e)
    {
      Console.WriteLine("NullReferenceException caught!!!");
      Console.WriteLine("Source : " + e.Source);
      Console.WriteLine("Message : " + e.Message);
    }
    catch(Exception e)
    {
      Console.WriteLine("Exception caught!!!");
      Console.WriteLine("Source : " + e.Source);
      Console.WriteLine("Message : " + e.Message);
    }

    return strRetPage;
}
   public static void Main()
   {
      Console.WriteLine(DoSocketGet("localhost"));
   }
 }

Imports System.Text
Imports System.IO
Imports System.Net
Imports System.Net.Sockets

 _

Public Class Sample
   
   
   Public Shared Function DoSocketGet(server As String) As String
      'Set up variables and String to write to the server.
    Dim ASCII As Encoding = Encoding.ASCII
    Dim [Get] As String = "GET / HTTP/1.1" + ControlChars.Lf + ControlChars.NewLine + "Host: " + server + ControlChars.Lf + ControlChars.NewLine + "Connection: Close" + ControlChars.Lf + ControlChars.NewLine + ControlChars.Lf + ControlChars.NewLine
    Dim ByteGet As [Byte]() = ASCII.GetBytes([Get])
    Dim RecvBytes(256) As [Byte]
    Dim strRetPage As [String] = Nothing


      
      ' IPAddress and IPEndPoint represent the endpoint that will
      '   receive the request.
      ' Get first IPAddress in list return by DNS.
      Try

 

         ' Define those variables to be evaluated in the next for loop and 
         ' then used to connect to the server. These variables are defined
         ' outside the for loop to make them accessible there after.
         Dim s As Socket = Nothing
         Dim hostEndPoint As IPEndPoint
         Dim hostAddress As IPAddress = Nothing
         Dim conPort As Integer = 80
         
         ' Get DNS host information.
         Dim hostInfo As IPHostEntry = Dns.Resolve(server)
         ' Get the DNS IP addresses associated with the host.
         Dim IPaddresses As IPAddress() = hostInfo.AddressList
         
         ' Evaluate the socket and receiving host IPAddress and IPEndPoint. 
      Dim index As Integer = 0
      For index = 0 To IPaddresses.Length - 1
        hostAddress = IPaddresses(index)
        hostEndPoint = New IPEndPoint(hostAddress, conPort)


        ' Creates the Socket to send data over a TCP connection.
        s = New Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp)


        ' Connect to the host using its IPEndPoint.
        s.Connect(hostEndPoint)

        If Not s.Connected Then
          ' Connection failed, try next IPaddress.
          strRetPage = "Unable to connect to host"
          s = Nothing
          GoTo ContinueFor1
        End If


        ' Sent the GET request to the host.
        s.Send(ByteGet, ByteGet.Length, 0)


ContinueFor1:
      Next index  ' End of the for loop.
      



      ' Receive the host home page content and loop until all the data is received.

      'Dim bytes As Int32 = s.Receive(RecvBytes, RecvBytes.Length, 0)
      Dim bytes As Int32 = s.Receive(RecvBytes, RecvBytes.Length, 0)

      strRetPage = "Default HTML page on " + server + ":\r\n"
      strRetPage = "Default HTML page on " + server + ":" + ControlChars.Lf + ControlChars.NewLine

      Dim i As Integer

      While bytes > 0

        bytes = s.Receive(RecvBytes, RecvBytes.Length, 0)

        strRetPage = strRetPage + ASCII.GetString(RecvBytes, 0, bytes)

      End While


      ' End of the try block.
    Catch e As SocketException
         Console.WriteLine("SocketException caught!!!")
         Console.WriteLine(("Source : " + e.Source))
         Console.WriteLine(("Message : " + e.Message))
      Catch e As ArgumentNullException
         Console.WriteLine("ArgumentNullException caught!!!")
         Console.WriteLine(("Source : " + e.Source))
         Console.WriteLine(("Message : " + e.Message))
      Catch e As NullReferenceException
         Console.WriteLine("NullReferenceException caught!!!")
         Console.WriteLine(("Source : " + e.Source))
         Console.WriteLine(("Message : " + e.Message))
      Catch e As Exception
         Console.WriteLine("Exception caught!!!")
         Console.WriteLine(("Source : " + e.Source))
         Console.WriteLine(("Message : " + e.Message))
      End Try
      
      Return strRetPage
   End Function 'DoSocketGet
    
   Public Shared Sub Main()
    Console.WriteLine(DoSocketGet("localhost"))
   End Sub
End Class

Remarques

Le addressFamily paramètre spécifie le schéma d’adressage utilisé par la Socket classe, le socketType paramètre spécifie le type de la Socket classe et le protocolType paramètre spécifie le protocole utilisé par Socket. Les trois paramètres ne sont pas indépendants. Certaines familles d’adresses limitent les protocoles qui peuvent être utilisés avec elles, et souvent le Socket type est implicite dans le protocole. Si la combinaison de la famille d’adresses, Socket du type et du type de protocole entraîne un non valide Socket, ce constructeur lève un SocketException.

Voir aussi

• SocketException
• AddressFamily
• ProtocolType
• SocketType