Char.CompareTo Metodo

  • Riferimento

Definizione

Spazio dei nomi:
System
Assembly:
System.Runtime.dll
Assembly:
netstandard.dll
Assembly:
mscorlib.dll

Confronta questa istanza con un oggetto o un tipo valore specificato e indica se l'istanza precede, segue o viene visualizzata nella stessa posizione dell'oggetto o tipo valore specificato all'interno dell'ordinamento.

Overload

CompareTo(Char)

Confronta questa istanza con un oggetto Char specificato e indica se l'istanza precede, segue o viene visualizzata nella stessa posizione dell'oggetto Char specificato all'interno dell'ordinamento.
CompareTo(Object)

Confronta questa istanza con un oggetto specificato e indica se l'istanza precede, segue o viene visualizzata nella stessa posizione dell'oggetto Object specificato all'interno dell'ordinamento.

CompareTo(Char)

Confronta questa istanza con un oggetto Char specificato e indica se l'istanza precede, segue o viene visualizzata nella stessa posizione dell'oggetto Char specificato all'interno dell'ordinamento.

public:
 virtual int CompareTo(char value);
public int CompareTo (char value);
abstract member CompareTo : char -> int
override this.CompareTo : char -> int
Public Function CompareTo (value As Char) As Integer

Parametri

value
Char

Oggetto Char da confrontare.

Restituisce

Int32

Numero con segno che indica la posizione dell'istanza nell'ordinamento in relazione al parametro value.

Valore restituito Descrizione
Minore di zero Questa istanza precede value.
Zero Questa istanza si trova nella stessa posizione di value nell'ordinamento.
Maggiore di zero L'istanza segue value.

Implementazioni

CompareTo(T)

Esempio

Nell'esempio di codice seguente vengono illustrate versioni generiche e non generiche del metodo CompareTo per diversi tipi valore e riferimento.

// This example demonstrates the two versions of the 
// CompareTo method for several base types.
// The general version takes a parameter of type Object, while the specific
// version takes a type-specific parameter, such as Boolean, Int32, or Double.
using namespace System;

void Show( String^ caption, Object^ var1, Object^ var2, int resultGeneric, int resultNonGeneric )
{
   String^ relation;
   Console::Write( caption );
   if ( resultGeneric == resultNonGeneric )
   {
      if ( resultGeneric < 0 )
            relation = "less than";
      else
      if ( resultGeneric > 0 )
            relation = "greater than";
      else
            relation = "equal to";
      Console::WriteLine( "{0} is {1} {2}", var1, relation, var2 );
   }
   // The following condition will never occur because the generic and non-generic
   // CompareTo methods are equivalent.
   else
   {
      Console::WriteLine( "Generic CompareTo = {0}; non-generic CompareTo = {1}", resultGeneric, resultNonGeneric );
   }
}

int main()
{
   String^ nl = Environment::NewLine;
   String^ msg = "{0}The following is the result of using the generic and non-generic{0}"
   "versions of the CompareTo method for several base types:{0}";
   Object^ obj; // An Object used to insure CompareTo(Object) is called.

   DateTime now = DateTime::Now;
   
   // Time span = 11 days, 22 hours, 33 minutes, 44 seconds
   TimeSpan tsX = TimeSpan(11,22,33,44);
   
   // Version = 1.2.333.4
   Version^ versX = gcnew Version(  "1.2.333.4" );
   
   // Guid = CA761232-ED42-11CE-BACD-00AA0057B223
   Guid guidX = Guid( "{CA761232-ED42-11CE-BACD-00AA0057B223}");
   Boolean a1 = true,a2 = true;
   Byte b1 = 1,b2 = 1;
   Int16 c1 = -2,c2 = 2;
   Int32 d1 = 3,d2 = 3;
   Int64 e1 = 4,e2 = -4;
   Decimal f1 = Decimal(-5.5), f2 = Decimal(5.5);
   Single g1 = 6.6f,g2 = 6.6f;
   Double h1 = 7.7,h2 = -7.7;
   Char i1 = 'A',i2 = 'A';
   String^ j1 = "abc", ^j2 = "abc";
   DateTime k1 = now,k2 = now;
   TimeSpan l1 = tsX,l2 = tsX;
   Version^ m1 = versX, ^m2 = gcnew Version(  "2.0" );
   Guid n1 = guidX,n2 = guidX;
   
   // The following types are not CLS-compliant.
   SByte w1 = 8,w2 = 8;
   UInt16 x1 = 9,x2 = 9;
   UInt32 y1 = 10,y2 = 10;
   UInt64 z1 = 11,z2 = 11;
   
   //
   Console::WriteLine( msg, nl );
   try
   {
      Show( "Boolean: ", a1, a2, a1.CompareTo( a2 ), a1.CompareTo( a2 ) );
      Show( "Byte:    ", b1, b2, b1.CompareTo( b2 ), b1.CompareTo( b2 ) );
      Show( "Int16:   ", c1, c2, c1.CompareTo( c2 ), c1.CompareTo( c2 ) );
      Show( "Int32:   ", d1, d2, d1.CompareTo( d2 ), d1.CompareTo( d2 ) );
      Show( "Int64:   ", e1, e2, e1.CompareTo( e2 ), e1.CompareTo( e2 ) );
      Show( "Decimal: ", f1, f2, f1.CompareTo( f2 ), f1.CompareTo( f2 ) );
      Show( "Single:  ", g1, g2, g1.CompareTo( g2 ), g1.CompareTo( g2 ) );
      Show( "Double:  ", h1, h2, h1.CompareTo( h2 ), h1.CompareTo( h2 ) );
      Show( "Char:    ", i1, i2, i1.CompareTo( i2 ), i1.CompareTo( i2 ) );
      
      // Use an anonymous object to hide the String object.
      obj = j2;
      Show( "String:  ", j1, j2, j1->CompareTo( j2 ), j1->CompareTo( obj ) );
      Show( "DateTime:", k1, k2, k1.CompareTo( k2 ), k1.CompareTo( k2 ) );
      Show(  "TimeSpan: ", l1, l2, l1.CompareTo( l2 ), l1.CompareTo( l2 ) );
      
      // Use an anonymous object to hide the Version object.
      obj = m2;
      Show(  "Version:  ", m1, m2, m1->CompareTo( m2 ), m1->CompareTo( obj ) );
      Show(  "Guid:     ", n1, n2, n1.CompareTo( n2 ), n1.CompareTo( n2 ) );
      
      //
      Console::WriteLine( "{0}The following types are not CLS-compliant:", nl );
      Show( "SByte:   ", w1, w2, w1.CompareTo( w2 ), w1.CompareTo( w2 ) );
      Show( "UInt16:  ", x1, x2, x1.CompareTo( x2 ), x1.CompareTo( x2 ) );
      Show( "UInt32:  ", y1, y2, y1.CompareTo( y2 ), y1.CompareTo( y2 ) );
      Show( "UInt64:  ", z1, z2, z1.CompareTo( z2 ), z1.CompareTo( z2 ) );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine( e );
   }

}
//     This example displays the following output:
//     
//     The following is the result of using the generic and non-generic versions of the
//     CompareTo method for several base types:
//     
//     Boolean:  True is equal to True
//     Byte:     1 is equal to 1
//     Int16:    -2 is less than 2
//     Int32:    3 is equal to 3
//     Int64:    4 is greater than -4
//     Decimal:  -5.5 is less than 5.5
//     Single:   6.6 is equal to 6.6
//     Double:   7.7 is greater than -7.7
//     Char:     A is equal to A
//     String:   abc is equal to abc
//     DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
//     TimeSpan: 11.22:33:44 is equal to 11.22:33:44
//     Version:  1.2.333.4 is less than 2.0
//     Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
//     aa0057b223
//     
//     The following types are not CLS-compliant:
//     SByte:    8 is equal to 8
//     UInt16:   9 is equal to 9
//     UInt32:   10 is equal to 10
//     UInt64:   11 is equal to 11

// This example demonstrates the generic and non-generic versions of the
// CompareTo method for several base types.
// The non-generic version takes a parameter of type Object, while the generic
// version takes a type-specific parameter, such as Boolean, Int32, or Double.

using System;

class Sample
{
    public static void Main()
    {
    string    nl = Environment.NewLine;
    string    msg = "{0}The following is the result of using the generic and non-generic{0}" +
                    "versions of the CompareTo method for several base types:{0}";

    DateTime  now = DateTime.Now;
// Time span = 11 days, 22 hours, 33 minutes, 44 seconds
    TimeSpan  tsX = new TimeSpan(11, 22, 33, 44);
// Version = 1.2.333.4
    Version   versX = new Version("1.2.333.4");
// Guid = CA761232-ED42-11CE-BACD-00AA0057B223
    Guid      guidX = new Guid("{CA761232-ED42-11CE-BACD-00AA0057B223}");

    Boolean  a1 = true,  a2 = true;
    Byte     b1 = 1,     b2 = 1;
    Int16    c1 = -2,    c2 = 2;
    Int32    d1 = 3,     d2 = 3;
    Int64    e1 = 4,     e2 = -4;
    Decimal  f1 = -5.5m, f2 = 5.5m;
    Single   g1 = 6.6f,  g2 = 6.6f;
    Double   h1 = 7.7d,  h2 = -7.7d;
    Char     i1 = 'A',   i2 = 'A';
    String   j1 = "abc", j2 = "abc";
    DateTime k1 = now,   k2 = now;
    TimeSpan l1 = tsX,   l2 = tsX;
    Version  m1 = versX, m2 = new Version("2.0");
    Guid     n1 = guidX, n2 = guidX;

// The following types are not CLS-compliant.
    SByte    w1 = 8,     w2 = 8;
    UInt16   x1 = 9,     x2 = 9;
    UInt32   y1 = 10,    y2 = 10;
    UInt64   z1 = 11,    z2 = 11;
//
    Console.WriteLine(msg, nl);
    try
        {
// The second and third Show method call parameters are automatically boxed because
// the second and third Show method declaration arguments expect type Object.

        Show("Boolean:  ", a1, a2, a1.CompareTo(a2), a1.CompareTo((Object)a2));
        Show("Byte:     ", b1, b2, b1.CompareTo(b2), b1.CompareTo((Object)b2));
        Show("Int16:    ", c1, c2, c1.CompareTo(c2), c1.CompareTo((Object)c2));
        Show("Int32:    ", d1, d2, d1.CompareTo(d2), d1.CompareTo((Object)d2));
        Show("Int64:    ", e1, e2, e1.CompareTo(e2), e1.CompareTo((Object)e2));
        Show("Decimal:  ", f1, f2, f1.CompareTo(f2), f1.CompareTo((Object)f2));
        Show("Single:   ", g1, g2, g1.CompareTo(g2), g1.CompareTo((Object)g2));
        Show("Double:   ", h1, h2, h1.CompareTo(h2), h1.CompareTo((Object)h2));
        Show("Char:     ", i1, i2, i1.CompareTo(i2), i1.CompareTo((Object)i2));
        Show("String:   ", j1, j2, j1.CompareTo(j2), j1.CompareTo((Object)j2));
        Show("DateTime: ", k1, k2, k1.CompareTo(k2), k1.CompareTo((Object)k2));
        Show("TimeSpan: ", l1, l2, l1.CompareTo(l2), l1.CompareTo((Object)l2));
        Show("Version:  ", m1, m2, m1.CompareTo(m2), m1.CompareTo((Object)m2));
        Show("Guid:     ", n1, n2, n1.CompareTo(n2), n1.CompareTo((Object)n2));
//
        Console.WriteLine("{0}The following types are not CLS-compliant:", nl);
        Show("SByte:    ", w1, w2, w1.CompareTo(w2), w1.CompareTo((Object)w2));
        Show("UInt16:   ", x1, x2, x1.CompareTo(x2), x1.CompareTo((Object)x2));
        Show("UInt32:   ", y1, y2, y1.CompareTo(y2), y1.CompareTo((Object)y2));
        Show("UInt64:   ", z1, z2, z1.CompareTo(z2), z1.CompareTo((Object)z2));
        }
    catch (Exception e)
        {
        Console.WriteLine(e);
        }
    }

    public static void Show(string caption, Object var1, Object var2,
                            int resultGeneric, int resultNonGeneric)
    {
    string relation;

    Console.Write(caption);
    if (resultGeneric == resultNonGeneric)
        {
        if      (resultGeneric < 0) relation = "less than";
        else if (resultGeneric > 0) relation = "greater than";
        else                        relation = "equal to";
        Console.WriteLine("{0} is {1} {2}", var1, relation, var2);
        }

// The following condition will never occur because the generic and non-generic
// CompareTo methods are equivalent.

    else
        {
        Console.WriteLine("Generic CompareTo = {0}; non-generic CompareTo = {1}",
                           resultGeneric, resultNonGeneric);
        }
   }
}
/*
This example produces the following results:

The following is the result of using the generic and non-generic versions of the
CompareTo method for several base types:

Boolean:  True is equal to True
Byte:     1 is equal to 1
Int16:    -2 is less than 2
Int32:    3 is equal to 3
Int64:    4 is greater than -4
Decimal:  -5.5 is less than 5.5
Single:   6.6 is equal to 6.6
Double:   7.7 is greater than -7.7
Char:     A is equal to A
String:   abc is equal to abc
DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
TimeSpan: 11.22:33:44 is equal to 11.22:33:44
Version:  1.2.333.4 is less than 2.0
Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
aa0057b223

The following types are not CLS-compliant:
SByte:    8 is equal to 8
UInt16:   9 is equal to 9
UInt32:   10 is equal to 10
UInt64:   11 is equal to 11
*/

' This example demonstrates the generic and non-generic versions of the 
' CompareTo method for several base types.
' The non-generic version takes a parameter of type Object, while the generic
' version takes a type-specific parameter, such as Boolean, Int32, or Double.

Class Sample
   Public Shared Sub Main()
      Dim nl As String = Environment.NewLine
      Dim msg As String = _
          "{0}The following is the result of using the generic and non-generic{0}" & _
          "versions of the CompareTo method for several base types:{0}"
      
      Dim now As DateTime = DateTime.Now
      ' Time span = 11 days, 22 hours, 33 minutes, 44 seconds
      Dim tsX As New TimeSpan(11, 22, 33, 44)
      ' Version = 1.2.333.4
      Dim versX As New Version("1.2.333.4")
      ' Guid = CA761232-ED42-11CE-BACD-00AA0057B223
      Dim guidX As New Guid("{CA761232-ED42-11CE-BACD-00AA0057B223}")
      
      Dim a1 As [Boolean] = True,    a2 As [Boolean] = True
      Dim b1 As [Byte] = 1,          b2 As [Byte] = 1
      Dim c1 As Int16 = -2,          c2 As Int16 = 2
      Dim d1 As Int32 = 3,           d2 As Int32 = 3
      Dim e1 As Int64 = 4,           e2 As Int64 = -4
      Dim f1 As [Decimal] = -5.5D,   f2 As [Decimal] = 5.5D
      Dim g1 As [Single] = 6.6F,     g2 As [Single] = 6.6F
      Dim h1 As [Double] = 7.7,      h2 As [Double] = -7.7
      Dim i1 As [Char] = "A"c,       i2 As [Char] = "A"c
      Dim j1 As String = "abc",      j2 As String = "abc"
      Dim k1 As DateTime = now,      k2 As DateTime = now
      Dim l1 As TimeSpan = tsX,      l2 As TimeSpan = tsX
      Dim m1 As Version = versX,     m2 As New Version("2.0")
      Dim n1 As Guid = guidX,        n2 As Guid = guidX
      
      ' The following types are not CLS-compliant.
      ' SByte, UInt16, UInt32, UInt64

      Console.WriteLine(msg, nl)
      Try
         ' The second and third Show method call parameters are automatically boxed because
         ' the second and third Show method declaration arguments expect type Object.

         Show("Boolean:  ", a1, a2, a1.CompareTo(a2), a1.CompareTo(CObj(a2)))
         Show("Byte:     ", b1, b2, b1.CompareTo(b2), b1.CompareTo(CObj(b2)))
         Show("Int16:    ", c1, c2, c1.CompareTo(c2), c1.CompareTo(CObj(c2)))
         Show("Int32:    ", d1, d2, d1.CompareTo(d2), d1.CompareTo(CObj(d2)))
         Show("Int64:    ", e1, e2, e1.CompareTo(e2), e1.CompareTo(CObj(e2)))
         Show("Decimal:  ", f1, f2, f1.CompareTo(f2), f1.CompareTo(CObj(f2)))
         Show("Single:   ", g1, g2, g1.CompareTo(g2), g1.CompareTo(CObj(g2)))
         Show("Double:   ", h1, h2, h1.CompareTo(h2), h1.CompareTo(CObj(h2)))
         Show("Char:     ", i1, i2, i1.CompareTo(i2), i1.CompareTo(CObj(i2)))
         Show("String:   ", j1, j2, j1.CompareTo(j2), j1.CompareTo(CObj(j2)))
         Show("DateTime: ", k1, k2, k1.CompareTo(k2), k1.CompareTo(CObj(k2)))
         Show("TimeSpan: ", l1, l2, l1.CompareTo(l2), l1.CompareTo(CObj(l2)))
         Show("Version:  ", m1, m2, m1.CompareTo(m2), m1.CompareTo(CObj(m2)))
         Show("Guid:     ", n1, n2, n1.CompareTo(n2), n1.CompareTo(CObj(n2)))
         '
         Console.WriteLine("{0}The following types are not CLS-compliant:", nl)
         Console.WriteLine("SByte, UInt16, UInt32, UInt64")

      Catch e As Exception
         Console.WriteLine(e)
      End Try
   End Sub
   
   Public Shared Sub Show(caption As String, var1 As [Object], var2 As [Object], _
                          resultGeneric As Integer, resultNonGeneric As Integer)
      Dim relation As String
      
      Console.Write(caption)
      If resultGeneric = resultNonGeneric Then
         If resultGeneric < 0 Then
            relation = "less than"
         ElseIf resultGeneric > 0 Then
            relation = "greater than"
         Else
            relation = "equal to"
         End If
         Console.WriteLine("{0} is {1} {2}", var1, relation, var2)
      
      ' The following condition will never occur because the generic and non-generic
      ' CompareTo methods are equivalent.

      Else
         Console.WriteLine("Generic CompareTo = {0}; non-generic CompareTo = {1}", _
                            resultGeneric, resultNonGeneric)
      End If
   End Sub
End Class
'
'This example produces the following results:
'
'The following is the result of using the generic and non-generic versions of the
'CompareTo method for several base types:
'
'Boolean:  True is equal to True
'Byte:     1 is equal to 1
'Int16:    -2 is less than 2
'Int32:    3 is equal to 3
'Int64:    4 is greater than -4
'Decimal:  -5.5 is less than 5.5
'Single:   6.6 is equal to 6.6
'Double:   7.7 is greater than -7.7
'Char:     A is equal to A
'String:   abc is equal to abc
'DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
'TimeSpan: 11.22:33:44 is equal to 11.22:33:44
'Version:  1.2.333.4 is less than 2.0
'Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
'aa0057b223
'
'The following types are not CLS-compliant:
'SByte, UInt16, UInt32, UInt64
'

Commenti

Questo metodo implementa l'interfaccia e offre prestazioni leggermente migliori rispetto al metodo perché non deve System.IComparable<T> convertire il parametro in un oggetto Char.CompareTo value .

Il confronto eseguito da questo metodo si basa sui valori codificati di questa istanza e value , non sulle relative caratteristiche lessicografiche.

Se il tipo di parametro del metodo ha meno bit (è più piccolo) del tipo di istanza, alcuni linguaggi di programmazione eseguono una conversione verso un tipo di dati più grande implicito che trasforma il valore del parametro in un valore con più CompareTo bit.

Si supponga, ad esempio, che il tipo di Int32 istanza sia e che il tipo di parametro sia Byte . Il compilatore Microsoft C# genera istruzioni per rappresentare il valore del parametro come oggetto, quindi genera un metodo che confronta i valori dell'istanza e la rappresentazione Int32 Int32.CompareTo del Int32 Int32 parametro.

In genere, le conversioni verso un tipo di dati più grande implicite vengono eseguite su tipi numerici. Consultare la documentazione del linguaggio di programmazione per determinare se il compilatore esegue conversioni verso un tipo di dati più grande. Se i tipi di istanza e di parametro non sono corrispondenti e non è disponibile una conversione appropriata, il compilatore genera istruzioni per eseguire il boxer del parametro e richiamare l'overload che CompareTo accetta un Object parametro.

Vedi anche

Si applica a

CompareTo(Object)

Confronta questa istanza con un oggetto specificato e indica se l'istanza precede, segue o viene visualizzata nella stessa posizione dell'oggetto Object specificato all'interno dell'ordinamento.

public:
 virtual int CompareTo(System::Object ^ value);
public int CompareTo (object? value);
public int CompareTo (object value);
abstract member CompareTo : obj -> int
override this.CompareTo : obj -> int
Public Function CompareTo (value As Object) As Integer

Parametri

value
Object

Oggetto da confrontare con questa istanza o null.

Restituisce

Int32

Numero con segno che indica la posizione dell'istanza nell'ordinamento in relazione al parametro value.

Valore restituito Descrizione
Minore di zero Questa istanza precede value.
Zero Questa istanza si trova nella stessa posizione di value nell'ordinamento.
Maggiore di zero L'istanza segue value.

-oppure-

value è null.

Implementazioni

CompareTo(Object)

Eccezioni

ArgumentException

value non è un oggetto Char.

Esempio

Nell'esempio di codice seguente viene illustrato CompareTo .

using namespace System;
int main()
{
   char chA = 'A';
   char chB = 'B';
   Console::WriteLine( chA.CompareTo( 'A' ) ); // Output: "0" (meaning they're equal)
   Console::WriteLine( 'b'.CompareTo( chB ) ); // Output: "32" (meaning 'b' is greater than 'B' by 32)
   Console::WriteLine( chA.CompareTo( chB ) ); // Output: "-1" (meaning 'A' is less than 'B' by 1)
}

using System;

public class CompareToSample {
    public static void Main() {
        char chA = 'A';
        char chB = 'B';

        Console.WriteLine(chA.CompareTo('A'));	// Output: "0" (meaning they're equal)
        Console.WriteLine('b'.CompareTo(chB));	// Output: "32" (meaning 'b' is greater than 'B' by 32)
        Console.WriteLine(chA.CompareTo(chB));	// Output: "-1" (meaning 'A' is less than 'B' by 1)
    }
}

let chA = 'A'
let chB = 'B'

printfn $"{chA.CompareTo 'A'}"  // Output: "0" (meaning they're equal)
printfn $"{'b'.CompareTo chB}"  // Output: "32" (meaning 'b' is greater than 'B' by 32)
printfn $"{chA.CompareTo chB}"  // Output: "-1" (meaning 'A' is less than 'B' by 1)

Module CompareToSample

    Sub Main()

        Dim chA As Char
        chA = "A"c
        Dim chB As Char
        chB = "B"c

        Console.WriteLine(chA.CompareTo("A"c))  ' Output: "0" (meaning they're equal)
        Console.WriteLine("b"c.CompareTo(chB))  ' Output: "32" (meaning 'b' is 32 greater than 'B')
    Console.WriteLine(chA.CompareTo(chB))	' Output: "-1" (meaning 'A' is less than 'B' by 1)

    End Sub

End Module

Commenti

Il CompareTo metodo implementa IComparable l'interfaccia .

Il value parametro deve essere o null un'istanza di Char . In caso contrario, viene generata un'eccezione.

Il confronto eseguito da questo metodo si basa sui valori codificati di questa istanza e value , non necessariamente sulle relative caratteristiche lessicografiche. Qualsiasi istanza di Char , indipendentemente dal relativo valore, viene considerata maggiore di null .

Vedi anche

Si applica a