Graphics.FillClosedCurve Metodo

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points);

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, ... cli::array <System::Drawing::Point> ^ points);

public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.Point[] points);

public void FillClosedCurve (System.Drawing.Brush brush, params System.Drawing.Point[] points);

member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.Point[] -> unit

Public Sub FillClosedCurve (brush As Brush, points As Point())

Public Sub FillClosedCurve (brush As Brush, ParamArray points As Point())

Parametri

Eccezioni

Esempio

L'esempio di codice seguente è progettato per l'uso con Windows Form e richiede PaintEventArgse, che è un parametro del gestore eventi Paint. Il codice esegue le azioni seguenti:

• Crea un pennello rosso a tinta unita.

• Crea una matrice di quattro punti per definire una spline.

• Riempie la curva sullo schermo.

La curva ha una tensione predefinita di 0,5.

public:
   void FillClosedCurvePoint( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );

      //Create array of points for curve.
      Point point1 = Point(100,100);
      Point point2 = Point(200,50);
      Point point3 = Point(250,200);
      Point point4 = Point(50,150);
      array<Point>^ points = {point1,point2,point3,point4};

      // Fill curve on screen.
      e->Graphics->FillClosedCurve( redBrush, points );
   }

public void FillClosedCurvePoint(PaintEventArgs e)
{
             
    // Create solid brush.
    SolidBrush redBrush = new SolidBrush(Color.Red);
             
    //Create array of points for curve.
    Point point1 = new Point(100, 100);
    Point point2 = new Point(200,  50);
    Point point3 = new Point(250, 200);
    Point point4 = new Point(50, 150);
    Point[] points = {point1, point2, point3, point4};
             
    // Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points);
}

Public Sub FillClosedCurvePoint(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim redBrush As New SolidBrush(Color.Red)

    'Create array of points for curve.
    Dim point1 As New Point(100, 100)
    Dim point2 As New Point(200, 50)
    Dim point3 As New Point(250, 200)
    Dim point4 As New Point(50, 150)
    Dim points As Point() = {point1, point2, point3, point4}

    ' Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points)
End Sub

Commenti

Questo metodo riempie l'interno di una spline cardinale chiusa che passa attraverso ogni punto della matrice. Se l'ultimo punto non corrisponde al primo punto, viene aggiunto un segmento di curva aggiuntivo dall'ultimo punto al primo punto per chiuderlo.

La matrice di punti deve contenere almeno quattro strutture Point.

Questo metodo usa una tensione predefinita di 0,5.

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points);

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, ... cli::array <System::Drawing::PointF> ^ points);

public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.PointF[] points);

public void FillClosedCurve (System.Drawing.Brush brush, params System.Drawing.PointF[] points);

member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.PointF[] -> unit

Public Sub FillClosedCurve (brush As Brush, points As PointF())

Public Sub FillClosedCurve (brush As Brush, ParamArray points As PointF())

Parametri

Eccezioni

Esempio

L'esempio di codice seguente è progettato per l'uso con Windows Form e richiede PaintEventArgse, che è un parametro del gestore eventi Paint. Il codice esegue le azioni seguenti:

• Crea un pennello rosso a tinta unita.

• Crea una matrice di quattro punti per definire una spline.

• Riempie la curva sullo schermo.

La curva ha una tensione predefinita di 0,5.

public:
   void FillClosedCurvePointF( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );

      //Create array of points for curve.
      PointF point1 = PointF(100.0F,100.0F);
      PointF point2 = PointF(200.0F,50.0F);
      PointF point3 = PointF(250.0F,200.0F);
      PointF point4 = PointF(50.0F,150.0F);
      array<PointF>^ points = {point1,point2,point3,point4};

      // Fill curve on screen.
      e->Graphics->FillClosedCurve( redBrush, points );
   }

public void FillClosedCurvePointF(PaintEventArgs e)
{
             
    // Create solid brush.
    SolidBrush redBrush = new SolidBrush(Color.Red);
             
    //Create array of points for curve.
    PointF point1 = new PointF(100.0F, 100.0F);
    PointF point2 = new PointF(200.0F,  50.0F);
    PointF point3 = new PointF(250.0F, 200.0F);
    PointF point4 = new PointF(50.0F, 150.0F);
    PointF[] points = {point1, point2, point3, point4};
             
    // Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points);
}

Public Sub FillClosedCurvePointF(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim redBrush As New SolidBrush(Color.Red)

    'Create array of points for curve.
    Dim point1 As New PointF(100.0F, 100.0F)
    Dim point2 As New PointF(200.0F, 50.0F)
    Dim point3 As New PointF(250.0F, 200.0F)
    Dim point4 As New PointF(50.0F, 150.0F)
    Dim points As PointF() = {point1, point2, point3, point4}

    ' Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points)
End Sub

Commenti

Questo metodo riempie l'interno di una spline cardinale chiusa che passa attraverso ogni punto della matrice. Se l'ultimo punto non corrisponde al primo punto, viene aggiunto un segmento di curva aggiuntivo dall'ultimo punto al primo punto per chiuderlo.

La matrice di punti deve contenere almeno quattro strutture PointF.

Questo metodo usa una tensione predefinita di 0,5.

Origine:

Graphics.cs

Origine:

Graphics.cs

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::Point> points);

public void FillClosedCurve (System.Drawing.Brush brush, scoped ReadOnlySpan<System.Drawing.Point> points);

member this.FillClosedCurve : System.Drawing.Brush * ReadOnlySpan<System.Drawing.Point> -> unit

Public Sub FillClosedCurve (brush As Brush, points As ReadOnlySpan(Of Point))

Parametri

Origine:

Graphics.cs

Origine:

Graphics.cs

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::PointF> points);

public void FillClosedCurve (System.Drawing.Brush brush, scoped ReadOnlySpan<System.Drawing.PointF> points);

member this.FillClosedCurve : System.Drawing.Brush * ReadOnlySpan<System.Drawing.PointF> -> unit

Public Sub FillClosedCurve (brush As Brush, points As ReadOnlySpan(Of PointF))

Parametri

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points, System::Drawing::Drawing2D::FillMode fillmode);

public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.Point[] points, System.Drawing.Drawing2D.FillMode fillmode);

member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.Point[] * System.Drawing.Drawing2D.FillMode -> unit

Public Sub FillClosedCurve (brush As Brush, points As Point(), fillmode As FillMode)

Parametri

Eccezioni

Esempio

L'esempio di codice seguente è progettato per l'uso con Windows Form e richiede PaintEventArgse, che è un parametro del gestore eventi Paint. Il codice esegue le azioni seguenti:

• Crea un pennello rosso a tinta unita.

• Crea una matrice di quattro punti per definire una spline.

• Imposta la modalità di riempimento su Winding.

• Riempie la curva sullo schermo.

La curva ha una tensione predefinita di 0,5.

public:
   void FillClosedCurvePointFillMode( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );

      //Create array of points for curve.
      Point point1 = Point(100,100);
      Point point2 = Point(200,50);
      Point point3 = Point(250,200);
      Point point4 = Point(50,150);
      array<Point>^ points = {point1,point2,point3,point4};

      // Set fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Fill curve on screen.
      e->Graphics->FillClosedCurve( redBrush, points, newFillMode );
   }

public void FillClosedCurvePointFillMode(PaintEventArgs e)
{
             
    // Create solid brush.
    SolidBrush redBrush = new SolidBrush(Color.Red);
             
    //Create array of points for curve.
    Point point1 = new Point(100, 100);
    Point point2 = new Point(200,  50);
    Point point3 = new Point(250, 200);
    Point point4 = new Point(50, 150);
    Point[] points = {point1, point2, point3, point4};
             
    // Set fill mode.
    FillMode newFillMode = FillMode.Winding;
             
    // Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode);
}

Public Sub FillClosedCurvePointFillMode(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim redBrush As New SolidBrush(Color.Red)

    'Create array of points for curve.
    Dim point1 As New Point(100, 100)
    Dim point2 As New Point(200, 50)
    Dim point3 As New Point(250, 200)
    Dim point4 As New Point(50, 150)
    Dim points As Point() = {point1, point2, point3, point4}

    ' Set fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode)
End Sub

Commenti

Questo metodo riempie l'interno di una spline cardinale chiusa che passa attraverso ogni punto della matrice. Se l'ultimo punto non corrisponde al primo punto, viene aggiunto un segmento di curva aggiuntivo dall'ultimo punto al primo punto per chiuderlo.

La matrice di punti deve contenere almeno quattro strutture Point.

Questo metodo usa una tensione predefinita di 0,5.

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points, System::Drawing::Drawing2D::FillMode fillmode);

public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.PointF[] points, System.Drawing.Drawing2D.FillMode fillmode);

member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.PointF[] * System.Drawing.Drawing2D.FillMode -> unit

Public Sub FillClosedCurve (brush As Brush, points As PointF(), fillmode As FillMode)

Parametri

Eccezioni

Esempio

L'esempio di codice seguente è progettato per l'uso con Windows Form e richiede PaintEventArgse, che è un parametro del gestore eventi Paint. Il codice esegue le azioni seguenti:

• Crea un pennello rosso a tinta unita.

• Crea una matrice di quattro punti per definire una spline.

• Imposta la modalità di riempimento su Winding.

• Riempie la curva sullo schermo.

La curva ha una tensione predefinita di 0,5.

public:
   void FillClosedCurvePointFFillMode( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );

      // Create array of points for curve.
      PointF point1 = PointF(100.0F,100.0F);
      PointF point2 = PointF(200.0F,50.0F);
      PointF point3 = PointF(250.0F,200.0F);
      PointF point4 = PointF(50.0F,150.0F);
      array<PointF>^ points = {point1,point2,point3,point4};

      // Set fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Fill curve on screen.
      e->Graphics->FillClosedCurve( redBrush, points, newFillMode );
   }

public void FillClosedCurvePointFFillMode(PaintEventArgs e)
{
             
    // Create solid brush.
    SolidBrush redBrush = new SolidBrush(Color.Red);
             
    // Create array of points for curve.
    PointF point1 = new PointF(100.0F, 100.0F);
    PointF point2 = new PointF(200.0F,  50.0F);
    PointF point3 = new PointF(250.0F, 200.0F);
    PointF point4 = new PointF(50.0F, 150.0F);
    PointF[] points = {point1, point2, point3, point4};
             
    // Set fill mode.
    FillMode newFillMode = FillMode.Winding;
             
    // Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode);
}

Public Sub FillClosedCurvePointFFillMode(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim redBrush As New SolidBrush(Color.Red)

    ' Create array of points for curve.
    Dim point1 As New PointF(100.0F, 100.0F)
    Dim point2 As New PointF(200.0F, 50.0F)
    Dim point3 As New PointF(250.0F, 200.0F)
    Dim point4 As New PointF(50.0F, 150.0F)
    Dim points As PointF() = {point1, point2, point3, point4}

    ' Set fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode)
End Sub

Commenti

Questo metodo riempie l'interno di una spline cardinale chiusa che passa attraverso ogni punto della matrice. Se l'ultimo punto non corrisponde al primo punto, viene aggiunto un segmento di curva aggiuntivo dall'ultimo punto al primo punto per chiuderlo.

La matrice di punti deve contenere almeno quattro strutture Point.

Questo metodo usa una tensione predefinita di 0,5.

Origine:

Graphics.cs

Origine:

Graphics.cs

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::Point> points, System::Drawing::Drawing2D::FillMode fillmode);

public void FillClosedCurve (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.Point> points, System.Drawing.Drawing2D.FillMode fillmode);

member this.FillClosedCurve : System.Drawing.Brush * ReadOnlySpan<System.Drawing.Point> * System.Drawing.Drawing2D.FillMode -> unit

Public Sub FillClosedCurve (brush As Brush, points As ReadOnlySpan(Of Point), fillmode As FillMode)

Parametri

Origine:

Graphics.cs

Origine:

Graphics.cs

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::PointF> points, System::Drawing::Drawing2D::FillMode fillmode);

public void FillClosedCurve (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.PointF> points, System.Drawing.Drawing2D.FillMode fillmode);

member this.FillClosedCurve : System.Drawing.Brush * ReadOnlySpan<System.Drawing.PointF> * System.Drawing.Drawing2D.FillMode -> unit

Public Sub FillClosedCurve (brush As Brush, points As ReadOnlySpan(Of PointF), fillmode As FillMode)

Parametri

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points, System::Drawing::Drawing2D::FillMode fillmode, float tension);

public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.Point[] points, System.Drawing.Drawing2D.FillMode fillmode, float tension);

member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.Point[] * System.Drawing.Drawing2D.FillMode * single -> unit

Public Sub FillClosedCurve (brush As Brush, points As Point(), fillmode As FillMode, tension As Single)

Parametri

Eccezioni

Esempio

L'esempio di codice seguente è progettato per l'uso con Windows Form e richiede PaintEventArgse, che è un parametro del gestore eventi Paint. Il codice esegue le azioni seguenti:

• Crea un pennello rosso a tinta unita.

• Crea una matrice di quattro punti per definire una spline.

• Imposta la modalità di riempimento su Winding.

• Imposta la tensione su 1,0.

• Riempie la curva sullo schermo.

public:
   void FillClosedCurvePointFillModeTension( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );

      // Create array of points for curve.
      Point point1 = Point(100,100);
      Point point2 = Point(200,50);
      Point point3 = Point(250,200);
      Point point4 = Point(50,150);
      array<Point>^ points = {point1,point2,point3,point4};

      // Set fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Set tension.
      float tension = 1.0F;

      // Fill curve on screen.
      e->Graphics->FillClosedCurve( redBrush, points, newFillMode, tension );
   }

public void FillClosedCurvePointFillModeTension(PaintEventArgs e)
{
             
    // Create solid brush.
    SolidBrush redBrush = new SolidBrush(Color.Red);
             
    // Create array of points for curve.
    Point point1 = new Point(100, 100);
    Point point2 = new Point(200,  50);
    Point point3 = new Point(250, 200);
    Point point4 = new Point(50, 150);
    Point[] points = {point1, point2, point3, point4};
             
    // Set fill mode.
    FillMode newFillMode = FillMode.Winding;
             
    // Set tension.
    float tension = 1.0F;
             
    // Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode, tension);
}

Public Sub FillClosedCurvePointFillModeTension(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim redBrush As New SolidBrush(Color.Red)

    ' Create array of points for curve.
    Dim point1 As New Point(100, 100)
    Dim point2 As New Point(200, 50)
    Dim point3 As New Point(250, 200)
    Dim point4 As New Point(50, 150)
    Dim points As Point() = {point1, point2, point3, point4}

    ' Set fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Set tension.
    Dim tension As Single = 1.0F

    ' Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode, tension)
End Sub

Commenti

Questo metodo riempie l'interno di una spline cardinale chiusa che passa attraverso ogni punto della matrice. Se l'ultimo punto non corrisponde al primo punto, viene aggiunto un segmento di curva aggiuntivo dall'ultimo punto al primo punto per chiuderlo.

La matrice di punti deve contenere almeno quattro strutture Point.

Il parametro tension determina la forma della spline. Se il valore del parametro tension è 0,0F, questo metodo disegna segmenti di linea retta per connettere i punti. In genere, il parametro tension è minore o uguale a 1,0F. I valori superiori a 1,0F producono risultati insoliti.

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

Origine:

Graphics.cs

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points, System::Drawing::Drawing2D::FillMode fillmode, float tension);

public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.PointF[] points, System.Drawing.Drawing2D.FillMode fillmode, float tension);

member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.PointF[] * System.Drawing.Drawing2D.FillMode * single -> unit

Public Sub FillClosedCurve (brush As Brush, points As PointF(), fillmode As FillMode, tension As Single)

Parametri

Eccezioni

Esempio

L'esempio di codice seguente è progettato per l'uso con Windows Form e richiede PaintEventArgse, che è un parametro del gestore eventi Paint. Il codice esegue le azioni seguenti:

• Crea un pennello rosso a tinta unita.

• Crea una matrice di quattro punti per definire una spline.

• Imposta la modalità di riempimento su Winding.

• Imposta la tensione su 1,0.

• Riempie la curva sullo schermo.

public:
   void FillClosedCurvePointFFillModeTension( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );

      // Create array of points for curve.
      PointF point1 = PointF(100.0F,100.0F);
      PointF point2 = PointF(200.0F,50.0F);
      PointF point3 = PointF(250.0F,200.0F);
      PointF point4 = PointF(50.0F,150.0F);
      array<PointF>^ points = {point1,point2,point3,point4};

      // Set fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Set tension.
      float tension = 1.0F;

      // Fill curve on screen.
      e->Graphics->FillClosedCurve( redBrush, points, newFillMode, tension );
   }

public void FillClosedCurvePointFFillModeTension(PaintEventArgs e)
{
             
    // Create solid brush.
    SolidBrush redBrush = new SolidBrush(Color.Red);
             
    // Create array of points for curve.
    PointF point1 = new PointF(100.0F, 100.0F);
    PointF point2 = new PointF(200.0F,  50.0F);
    PointF point3 = new PointF(250.0F, 200.0F);
    PointF point4 = new PointF(50.0F, 150.0F);
    PointF[] points = {point1, point2, point3, point4};
             
    // Set fill mode.
    FillMode newFillMode = FillMode.Winding;
             
    // Set tension.
    float tension = 1.0F;
             
    // Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode, tension);
}

Public Sub FillClosedCurvePointFFillModeTension(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim redBrush As New SolidBrush(Color.Red)

    ' Create array of points for curve.
    Dim point1 As New PointF(100.0F, 100.0F)
    Dim point2 As New PointF(200.0F, 50.0F)
    Dim point3 As New PointF(250.0F, 200.0F)
    Dim point4 As New PointF(50.0F, 150.0F)
    Dim points As PointF() = {point1, point2, point3, point4}

    ' Set fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Set tension.
    Dim tension As Single = 1.0F

    ' Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode, tension)
End Sub

Commenti

Questo metodo riempie l'interno di una spline cardinale chiusa che passa attraverso ogni punto della matrice. Se l'ultimo punto non corrisponde al primo punto, viene aggiunto un segmento di curva aggiuntivo dall'ultimo punto al primo punto per chiuderlo.

La matrice di punti deve contenere almeno quattro strutture Point.

Il parametro tension determina la forma della spline. Se il valore del parametro tension è 0,0F, questo metodo disegna segmenti di linea retta per connettere i punti. In genere, il parametro tension è minore o uguale a 1,0F. I valori superiori a 1,0F producono risultati insoliti.

Origine:

Graphics.cs

Origine:

Graphics.cs

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::Point> points, System::Drawing::Drawing2D::FillMode fillmode, float tension);

public void FillClosedCurve (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.Point> points, System.Drawing.Drawing2D.FillMode fillmode, float tension);

member this.FillClosedCurve : System.Drawing.Brush * ReadOnlySpan<System.Drawing.Point> * System.Drawing.Drawing2D.FillMode * single -> unit

Public Sub FillClosedCurve (brush As Brush, points As ReadOnlySpan(Of Point), fillmode As FillMode, tension As Single)

Parametri

Origine:

Graphics.cs

Origine:

Graphics.cs

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::PointF> points, System::Drawing::Drawing2D::FillMode fillmode, float tension);

public void FillClosedCurve (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.PointF> points, System.Drawing.Drawing2D.FillMode fillmode, float tension);

member this.FillClosedCurve : System.Drawing.Brush * ReadOnlySpan<System.Drawing.PointF> * System.Drawing.Drawing2D.FillMode * single -> unit

Public Sub FillClosedCurve (brush As Brush, points As ReadOnlySpan(Of PointF), fillmode As FillMode, tension As Single)

Parametri