FileInfo.CopyTo メソッド

リファレンス

定義

名前空間:: System.IO

アセンブリ:: mscorlib.dll, System.IO.FileSystem.dll

アセンブリ:: System.IO.FileSystem.dll

アセンブリ:: System.Runtime.dll

アセンブリ:: mscorlib.dll

アセンブリ:: netstandard.dll

重要

一部の情報は、リリース前に大きく変更される可能性があるプレリリースされた製品に関するものです。 Microsoft は、ここに記載されている情報について、明示または黙示を問わず、一切保証しません。

既存のファイルを新しいファイルにコピーします。

オーバーロード

CopyTo(String)	既存のファイルを上書きできないようにして、既存のファイルを新しいファイルにコピーします。
CopyTo(String, Boolean)	既存のファイルを上書きできるようにして、既存のファイルを新しいファイルにコピーします。

CopyTo(String)

ソース:: FileInfo.cs

ソース:: FileInfo.cs

ソース:: FileInfo.cs

既存のファイルを上書きできないようにして、既存のファイルを新しいファイルにコピーします。

public:
 System::IO::FileInfo ^ CopyTo(System::String ^ destFileName);

public System.IO.FileInfo CopyTo (string destFileName);

member this.CopyTo : string -> System.IO.FileInfo

Public Function CopyTo (destFileName As String) As FileInfo

パラメーター

destFileName: String

コピー先の新しいファイルの名前。

戻り値

FileInfo

完全修飾パスを含む新しいファイル。

例外

ArgumentException

2.1 より前のバージョンの.NET Frameworkと .NET Core: destFileName が空であるか、空白のみを含んでいるか、無効な文字が含まれています。

IOException

エラーが発生したか、リンク先ファイルが既に存在します。

SecurityException

呼び出し元に、必要なアクセス許可がありません。

ArgumentNullException

destFileName が nullです。

UnauthorizedAccessException

ディレクトリパスが渡されるか、ファイルが別のドライブに移動されています。

DirectoryNotFoundException

destFileName で指定されたディレクトリが存在しません。

PathTooLongException

指定したパス、ファイル名、またはその両方がシステム定義の最大長を超えています。

NotSupportedException

destFileName の文字列内にコロン (:) が含まれていますが、ボリュームを指定していません。

例

次の例では、メソッドの両方のオーバーロードを CopyTo 示します。

using namespace System;
using namespace System::IO;

int main()
{
   String^ path = "c:\\MyTest.txt";
   String^ path2 = "c:\\MyTest.txttemp";
   FileInfo^ fi1 = gcnew FileInfo( path );
   FileInfo^ fi2 = gcnew FileInfo( path2 );
   try
   {
      // Create the file and clean up handles.
      FileStream^ fs = fi1->Create();
      if ( fs )
         delete (IDisposable^)fs;
      
      //Ensure that the target does not exist.
      fi2->Delete();
      
      //Copy the file.
      fi1->CopyTo( path2 );
      Console::WriteLine( "{0} was copied to {1}.", path, path2 );
      
      //Try to copy it again, which should succeed.
      fi1->CopyTo( path2, true );
      Console::WriteLine( "The second Copy operation succeeded, which is expected." );
   }
   catch ( Exception^ ) 
   {
      Console::WriteLine( "Double copying was not allowed, which is not expected." );
   }
}
//This code produces output similar to the following; 
//results may vary based on the computer/file structure/etc.:
//
//The second Copy operation succeeded, which is expected.

using System;
using System.IO;

class Test
{

    public static void Main()
    {
        string path = @"c:\SoureFile.txt";
        string path2 = @"c:\NewFile.txt";
        FileInfo fi1 = new FileInfo(path);
        FileInfo fi2 = new FileInfo(path2);

        try
        {
            // Create the source file.
            using (FileStream fs = fi1.Create()) { }

            //Ensure that the target file does not exist.
            if (File.Exists(path2))
            {
                fi2.Delete();
            }

            //Copy the file.f
            fi1.CopyTo(path2);
            Console.WriteLine("{0} was copied to {1}.", path, path2);
        }
        catch (IOException ioex)
        {
            Console.WriteLine(ioex.Message);
        }
    }
}

Imports System.IO

Public Class Test

    Public Shared Sub Main()
        'Specify the directories you want to manipulate.
        Dim path As String = "c:\SourceFile.txt"
        Dim path2 As String = "c:\NewFile.txt"
        Dim fi As FileInfo = New FileInfo(path)
        Dim fi2 As FileInfo = New FileInfo(path2)

        Try
            Using fs As FileStream = fi.Create()
            End Using

            'Ensure that the target does not exist.
            If File.Exists(path2) Then
                fi2.Delete()
            End If
            
            'Copy the file.
            fi.CopyTo(path2)
            Console.WriteLine("{0} was copied to {1}.", path, path2)

        Catch ioex As IOException
            Console.WriteLine(ioex.Message)
        End Try
    End Sub
End Class

次の例では、あるファイルを別のファイルにコピーし、コピー先ファイルが既に存在する場合に例外をスローする方法を示します。

using namespace System;
using namespace System::IO;
int main()
{
   try
   {
      
      // Create a reference to a file, which might or might not exist.
      // If it does not exist, it is not yet created.
      FileInfo^ fi = gcnew FileInfo( "temp.txt" );
      
      // Create a writer, ready to add entries to the file.
      StreamWriter^ sw = fi->AppendText();
      sw->WriteLine( "Add as many lines as you like..." );
      sw->WriteLine( "Add another line to the output..." );
      sw->Flush();
      sw->Close();
      
      // Get the information out of the file and display it.
      StreamReader^ sr = gcnew StreamReader( fi->OpenRead() );
      Console::WriteLine( "This is the information in the first file:" );
      while ( sr->Peek() != -1 )
            Console::WriteLine( sr->ReadLine() );
      
      // Copy this file to another file. The file will not be overwritten if it already exists.
      FileInfo^ newfi = fi->CopyTo( "newTemp.txt" );
      
      // Get the information out of the new file and display it.* sr = new StreamReader(newfi->OpenRead());
      Console::WriteLine( "{0}This is the information in the second file:", Environment::NewLine );
      while ( sr->Peek() != -1 )
            Console::WriteLine( sr->ReadLine() );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine( e->Message );
   }

}
//This code produces output similar to the following; 
//results may vary based on the computer/file structure/etc.:
//
//This is the information in the first file:
//Add as many lines as you like...
//Add another line to the output...
//
//This is the information in the second file:

using System;
using System.IO;

public class CopyToTest
{
    public static void Main()
    {
        try
        {
            // Create a reference to a file, which might or might not exist.
            // If it does not exist, it is not yet created.
            FileInfo fi = new FileInfo("temp.txt");
            // Create a writer, ready to add entries to the file.
            StreamWriter sw = fi.AppendText();
            sw.WriteLine("Add as many lines as you like...");
            sw.WriteLine("Add another line to the output...");
            sw.Flush();
            sw.Close();
            // Get the information out of the file and display it.
            StreamReader sr = new StreamReader(fi.OpenRead());
            Console.WriteLine("This is the information in the first file:");
            while (sr.Peek() != -1)
                Console.WriteLine(sr.ReadLine());
            // Copy this file to another file. The file will not be overwritten if it already exists.
            FileInfo newfi = fi.CopyTo("newTemp.txt");
            // Get the information out of the new file and display it.
            sr = new StreamReader(newfi.OpenRead());
            Console.WriteLine("{0}This is the information in the second file:", Environment.NewLine);
            while (sr.Peek() != -1)
                Console.WriteLine(sr.ReadLine());
        }
        catch(Exception e)
        {
            Console.WriteLine(e.Message);
        }
    }
}
//This code produces output similar to the following;
//results may vary based on the computer/file structure/etc.:
//
//This is the information in the first file:
//Add as many lines as you like...
//Add another line to the output...

//This is the information in the second file:
//Add as many lines as you like...
//Add another line to the output...

Imports System.IO

Public Class CopyToTest
    Public Shared Sub Main()
        Try
            ' Create a reference to a file, which might or might not exist.
            ' If it does not exist, it is not yet created.
            Dim fi As New FileInfo("temp.txt")
            ' Create a writer, ready to add entries to the file.
            Dim sw As StreamWriter = fi.AppendText()
            sw.WriteLine("Add as many lines as you like...")
            sw.WriteLine("Add another line to the output...")
            sw.Flush()
            sw.Close()
            ' Get the information out of the file and display it.
            Dim sr As New StreamReader(fi.OpenRead())
            Console.WriteLine("This is the information in the first file:")
            While sr.Peek() <> -1
                Console.WriteLine(sr.ReadLine())
            End While
            ' Copy this file to another file.
            Dim newfi As FileInfo = fi.CopyTo("newTemp.txt")
            ' Get the information out of the new file and display it.
            sr = New StreamReader(newfi.OpenRead())
            Console.WriteLine("{0}This is the information in the second file:", Environment.NewLine)
            While sr.Peek() <> -1
                Console.WriteLine(sr.ReadLine())
            End While
        Catch e As Exception
            Console.WriteLine(e.Message)
        End Try
    End Sub
End Class
'This code produces output similar to the following; 
'results may vary based on the computer/file structure/etc.:
'
'This is the information in the first file:
'Add as many lines as you like...
'Add another line to the output...
'
'This is the information in the second file:
'Add as many lines as you like...
'Add another line to the output...

注釈

メソッドを CopyTo(String, Boolean) 使用して、既存のファイルの上書きを許可します。

注意事項

可能な限り、このメソッドで短いファイル名 (XXXXXX ~1.XXX など) を使用しないでください。 2 つのファイルに同等の短いファイル名がある場合、このメソッドは失敗し、例外が発生したり、望ましくない動作が発生したりする可能性があります

こちらもご覧ください

適用対象

CopyTo(String, Boolean)

ソース:: FileInfo.cs

ソース:: FileInfo.cs

ソース:: FileInfo.cs

既存のファイルを上書きできるようにして、既存のファイルを新しいファイルにコピーします。

public:
 System::IO::FileInfo ^ CopyTo(System::String ^ destFileName, bool overwrite);

public System.IO.FileInfo CopyTo (string destFileName, bool overwrite);

member this.CopyTo : string * bool -> System.IO.FileInfo

Public Function CopyTo (destFileName As String, overwrite As Boolean) As FileInfo

パラメーター

destFileName: String

コピー先の新しいファイルの名前。

overwrite: Boolean

既存のファイルを上書きできるようにする場合は true。それ以外の場合は false。

戻り値

FileInfo

新しいファイル。または、overwrite が true の場合は、既存のファイルを上書きしたファイル。ファイルが存在しており、overwrite が false の場合は、IOException がスローされます。

例外

ArgumentException

2.1 より前のバージョンの.NET Frameworkと .NET Core: destFileName が空であるか、空白のみを含んでいるか、無効な文字が含まれています。

IOException

エラーが発生したか、リンク先ファイルが既に存在し、overwrite が false です。

SecurityException

呼び出し元に、必要なアクセス許可がありません。

ArgumentNullException

destFileName が nullです。

DirectoryNotFoundException

destFileName で指定されたディレクトリが存在しません。

UnauthorizedAccessException

ディレクトリパスが渡されるか、ファイルが別のドライブに移動されています。

PathTooLongException

指定したパス、ファイル名、またはその両方がシステム定義の最大長を超えています。

NotSupportedException

destFileName の文字列の途中にコロン (:) が含まれています。

例

次の例では、メソッドの両方のオーバーロードを CopyTo 示します。

using namespace System;
using namespace System::IO;

int main()
{
   String^ path = "c:\\MyTest.txt";
   String^ path2 = "c:\\MyTest.txttemp";
   FileInfo^ fi1 = gcnew FileInfo( path );
   FileInfo^ fi2 = gcnew FileInfo( path2 );
   try
   {
      // Create the file and clean up handles.
      FileStream^ fs = fi1->Create();
      if ( fs )
         delete (IDisposable^)fs;
      
      //Ensure that the target does not exist.
      fi2->Delete();
      
      //Copy the file.
      fi1->CopyTo( path2 );
      Console::WriteLine( "{0} was copied to {1}.", path, path2 );
      
      //Try to copy it again, which should succeed.
      fi1->CopyTo( path2, true );
      Console::WriteLine( "The second Copy operation succeeded, which is expected." );
   }
   catch ( Exception^ ) 
   {
      Console::WriteLine( "Double copying was not allowed, which is not expected." );
   }
}
//This code produces output similar to the following; 
//results may vary based on the computer/file structure/etc.:
//
//The second Copy operation succeeded, which is expected.

using System;
using System.IO;

class Test
{

    public static void Main()
    {
        string path = @"c:\SoureFile.txt";
        string path2 = @"c:\NewFile.txt";
        FileInfo fi1 = new FileInfo(path);
        FileInfo fi2 = new FileInfo(path2);

        try
        {
            // Create the source file.
            using (FileStream fs = fi1.Create()) { }

            //Ensure that the target file does not exist.
            if (File.Exists(path2))
            {
                fi2.Delete();
            }

            //Copy the file.f
            fi1.CopyTo(path2);
            Console.WriteLine("{0} was copied to {1}.", path, path2);
        }
        catch (IOException ioex)
        {
            Console.WriteLine(ioex.Message);
        }
    }
}

Imports System.IO

Public Class Test

    Public Shared Sub Main()
        'Specify the directories you want to manipulate.
        Dim path As String = "c:\SourceFile.txt"
        Dim path2 As String = "c:\NewFile.txt"
        Dim fi As FileInfo = New FileInfo(path)
        Dim fi2 As FileInfo = New FileInfo(path2)

        Try
            Using fs As FileStream = fi.Create()
            End Using

            'Ensure that the target does not exist.
            If File.Exists(path2) Then
                fi2.Delete()
            End If
            
            'Copy the file.
            fi.CopyTo(path2)
            Console.WriteLine("{0} was copied to {1}.", path, path2)

        Catch ioex As IOException
            Console.WriteLine(ioex.Message)
        End Try
    End Sub
End Class

次の例では、あるファイルを別のファイルにコピーし、既に存在するファイルを上書きするかどうかを指定します。

using namespace System;
using namespace System::IO;
int main()
{
   
   // Create a reference to a file, which might or might not exist.
   // If it does not exist, it is not yet created.
   FileInfo^ fi = gcnew FileInfo( "temp.txt" );
   
   // Create a writer, ready to add entries to the file.
   StreamWriter^ sw = fi->AppendText();
   sw->WriteLine( "Add as many lines as you like..." );
   sw->WriteLine( "Add another line to the output..." );
   sw->Flush();
   sw->Close();
   
   // Get the information out of the file and display it.
   StreamReader^ sr = gcnew StreamReader( fi->OpenRead() );
   Console::WriteLine( "This is the information in the first file:" );
   while ( sr->Peek() != -1 )
      Console::WriteLine( sr->ReadLine() );

   
   // Copy this file to another file. The true parameter specifies
   // that the file will be overwritten if it already exists.
   FileInfo^ newfi = fi->CopyTo( "newTemp.txt", true );
   
   // Get the information out of the new file and display it.* sr = new StreamReader( newfi->OpenRead() );
   Console::WriteLine( "{0}This is the information in the second file:", Environment::NewLine );
   while ( sr->Peek() != -1 )
      Console::WriteLine( sr->ReadLine() );
}
//This code produces output similar to the following; 
//results may vary based on the computer/file structure/etc.:
//
//This is the information in the first file:
//Add as many lines as you like...
//Add another line to the output...
//This is the information in the second file:
//

using System;
using System.IO;

public class CopyToTest
{
    public static void Main()
    {
        // Create a reference to a file, which might or might not exist.
        // If it does not exist, it is not yet created.
        FileInfo fi = new FileInfo("temp.txt");
        // Create a writer, ready to add entries to the file.
        StreamWriter sw = fi.AppendText();
        sw.WriteLine("Add as many lines as you like...");
        sw.WriteLine("Add another line to the output...");
        sw.Flush();
        sw.Close();
        // Get the information out of the file and display it.
        StreamReader sr = new StreamReader( fi.OpenRead() );
        Console.WriteLine("This is the information in the first file:");
        while (sr.Peek() != -1)
            Console.WriteLine( sr.ReadLine() );
        // Copy this file to another file. The true parameter specifies
        // that the file will be overwritten if it already exists.
        FileInfo newfi = fi.CopyTo("newTemp.txt", true);
        // Get the information out of the new file and display it.
        sr = new StreamReader( newfi.OpenRead() );
        Console.WriteLine("{0}This is the information in the second file:", Environment.NewLine);
        while (sr.Peek() != -1)
            Console.WriteLine( sr.ReadLine() );
    }
}
//This code produces output similar to the following;
//results may vary based on the computer/file structure/etc.:
//
//This is the information in the first file:
//Add as many lines as you like...
//Add another line to the output...
//Add as many lines as you like...
//Add another line to the output...

//This is the information in the second file:
//Add as many lines as you like...
//Add another line to the output...
//Add as many lines as you like...
//Add another line to the output...

Imports System.IO

Public Class CopyToTest
    Public Shared Sub Main()
        ' Create a reference to a file, which might or might not exist.
        ' If it does not exist, it is not yet created.
        Dim fi As New FileInfo("temp.txt")
        ' Create a writer, ready to add entries to the file.
        Dim sw As StreamWriter = fi.AppendText()
        sw.WriteLine("Add as many lines as you like...")
        sw.WriteLine("Add another line to the output...")
        sw.Flush()
        sw.Close()
        ' Get the information out of the file and display it.
        Dim sr As New StreamReader(fi.OpenRead())
        Console.WriteLine("This is the information in the first file:")
        While sr.Peek() <> -1
            Console.WriteLine(sr.ReadLine())
        End While
        ' Copy this file to another file. The true parameter specifies 
        ' that the file will be overwritten if it already exists.
        Dim newfi As FileInfo = fi.CopyTo("newTemp.txt", True)
        ' Get the information out of the new file and display it.
        sr = New StreamReader(newfi.OpenRead())
        Console.WriteLine("{0}This is the information in the second file:", Environment.NewLine)
        While sr.Peek() <> -1
            Console.WriteLine(sr.ReadLine())
        End While
    End Sub
End Class
'This code produces output similar to the following; 
'results may vary based on the computer/file structure/etc.:
'
'This is the information in the first file:
'Add as many lines as you like...
'Add another line to the output...
'
'This is the information in the second file:
'Add as many lines as you like...
'Add another line to the output...
'

注釈

既存のファイルの上書きを許可または防止するには、このメソッドを使用します。既定で既存の CopyTo(String) ファイルが上書きされないようにするには、メソッドを使用します。

注意事項

こちらもご覧ください

適用対象

次の方法で共有

FileInfo.CopyTo メソッド

定義

オーバーロード

CopyTo(String)

パラメーター

戻り値

例外

例

注釈

こちらもご覧ください

適用対象

CopyTo(String, Boolean)

パラメーター

戻り値

例外

例

注釈

こちらもご覧ください

適用対象

その他のリソース