AssemblyBuilder.AddResourceFile Yöntem

Başvuru

Tanım

Ad Alanı:: System.Reflection.Emit

Bütünleştirilmiş Kod:: mscorlib.dll

Önemli

Bazı bilgiler ürünün ön sürümüyle ilgilidir ve sürüm öncesinde önemli değişiklikler yapılmış olabilir. Burada verilen bilgilerle ilgili olarak Microsoft açık veya zımni hiçbir garanti vermez.

Var olan bir kaynak dosyasını bu derlemeye ekler.

Aşırı Yüklemeler

AddResourceFile(String, String)	Var olan bir kaynak dosyasını bu derlemeye ekler.
AddResourceFile(String, String, ResourceAttributes)	Var olan bir kaynak dosyasını bu derlemeye ekler.

AddResourceFile(String, String)

Var olan bir kaynak dosyasını bu derlemeye ekler.

public:
 void AddResourceFile(System::String ^ name, System::String ^ fileName);

public void AddResourceFile (string name, string fileName);

member this.AddResourceFile : string * string -> unit

Public Sub AddResourceFile (name As String, fileName As String)

Parametreler

name: String

Kaynağın mantıksal adı.

fileName: String

Mantıksal adın eşlendiği fiziksel dosya adı (.resources dosyası). Bu bir yol içermemelidir; dosya, eklendiği derlemeyle aynı dizinde olmalıdır.

Özel durumlar

ArgumentException

name daha önce tanımlanmıştır.

-veya-

Derlemede adlı fileNamebaşka bir dosya var.

-veya-

uzunluğu name sıfırdır.

-veya-

uzunluğu fileName sıfırdır veya fileName bir yol içeriyorsa.

ArgumentNullException

name veya fileName şeklindedir null.

FileNotFoundException

Dosya fileName bulunamadı.

SecurityException

Çağıranın gerekli izni yok.

Örnekler

Aşağıdaki kod örneği, kullanarak AddResourceFiledinamik olarak oluşturulmuş bir derlemeye kaynak dosyasının nasıl eklenerek oluşturulduğunu gösterir.

using namespace System;
using namespace System::IO;
using namespace System::Threading;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
ref class AsmBuilderGetFileDemo
{
public:
   static String^ myResourceFileName = "MyResource.txt";
   static FileInfo^ CreateResourceFile()
   {
      FileInfo^ f = gcnew FileInfo( myResourceFileName );
      StreamWriter^ sw = f->CreateText();
      sw->WriteLine( "Hello, world!" );
      sw->Close();
      return f;
   }

   static AssemblyBuilder^ BuildDynAssembly()
   {
      String^ myAsmFileName = "MyAsm.dll";
      AppDomain^ myDomain = Thread::GetDomain();
      AssemblyName^ myAsmName = gcnew AssemblyName;
      myAsmName->Name = "MyDynamicAssembly";
      AssemblyBuilder^ myAsmBuilder = myDomain->DefineDynamicAssembly( myAsmName, AssemblyBuilderAccess::RunAndSave );
      myAsmBuilder->AddResourceFile( "MyResource", myResourceFileName );
      
      // To confirm that the resource file has been added to the manifest,
      // we will save the assembly as MyAsm.dll. You can view the manifest
      // and confirm the presence of the resource file by running
      // "ildasm MyAsm.dll" from the prompt in the directory where you executed
      // the compiled code.
      myAsmBuilder->Save( myAsmFileName );
      return myAsmBuilder;
   }

};

int main()
{
   FileStream^ myResourceFS = nullptr;
   AsmBuilderGetFileDemo::CreateResourceFile();
   Console::WriteLine( "The contents of MyResource.txt, via GetFile:" );
   AssemblyBuilder^ myAsm = AsmBuilderGetFileDemo::BuildDynAssembly();
   try
   {
      myResourceFS = myAsm->GetFile( AsmBuilderGetFileDemo::myResourceFileName );
   }
   catch ( NotSupportedException^ ) 
   {
      Console::WriteLine( "---" );
      Console::WriteLine( "System::Reflection::Emit::AssemblyBuilder::GetFile\nis not supported in this SDK build." );
      Console::WriteLine( "The file data will now be retrieved directly, via a new FileStream." );
      Console::WriteLine( "---" );
      myResourceFS = gcnew FileStream( AsmBuilderGetFileDemo::myResourceFileName,FileMode::Open );
   }

   StreamReader^ sr = gcnew StreamReader( myResourceFS,System::Text::Encoding::ASCII );
   Console::WriteLine( sr->ReadToEnd() );
   sr->Close();
}


using System;
using System.IO;
using System.Threading;
using System.Reflection;
using System.Reflection.Emit;

class AsmBuilderGetFileDemo

{
   private static string myResourceFileName = "MyResource.txt";

   private static FileInfo CreateResourceFile()
   {

        FileInfo f = new FileInfo(myResourceFileName);
    StreamWriter sw = f.CreateText();

    sw.WriteLine("Hello, world!");

    sw.Close();

    return f;
   }

   private static AssemblyBuilder BuildDynAssembly()
   {

    string myAsmFileName = "MyAsm.dll";
    
    AppDomain myDomain = Thread.GetDomain();
    AssemblyName myAsmName = new AssemblyName();
    myAsmName.Name = "MyDynamicAssembly";	

    AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(
                        myAsmName,
                        AssemblyBuilderAccess.RunAndSave);

    myAsmBuilder.AddResourceFile("MyResource", myResourceFileName);

    // To confirm that the resource file has been added to the manifest,
    // we will save the assembly as MyAsm.dll. You can view the manifest
    // and confirm the presence of the resource file by running
    // "ildasm MyAsm.dll" from the prompt in the directory where you executed
    // the compiled code.

    myAsmBuilder.Save(myAsmFileName);	

    return myAsmBuilder;
   }

   public static void Main()
   {

    FileStream myResourceFS = null;

    CreateResourceFile();

    Console.WriteLine("The contents of MyResource.txt, via GetFile:");

    AssemblyBuilder myAsm = BuildDynAssembly();

    try
        {
       myResourceFS = myAsm.GetFile(myResourceFileName);
        }
    catch (NotSupportedException)
    {
       Console.WriteLine("---");
       Console.WriteLine("System.Reflection.Emit.AssemblyBuilder.GetFile\nis not supported " +
                 "in this SDK build.");
       Console.WriteLine("The file data will now be retrieved directly, via a new FileStream.");
       Console.WriteLine("---");
       myResourceFS = new FileStream(myResourceFileName,
                     FileMode.Open);
    }
    
    StreamReader sr = new StreamReader(myResourceFS, System.Text.Encoding.ASCII);
    Console.WriteLine(sr.ReadToEnd());
    sr.Close();
   }
}


Imports System.IO
Imports System.Threading
Imports System.Reflection
Imports System.Reflection.Emit

 _

Class AsmBuilderGetFileDemo
   
   Private Shared myResourceFileName As String = "MyResource.txt"
   
   
   Private Shared Function CreateResourceFile() As FileInfo
      
      Dim f As New FileInfo(myResourceFileName)
      Dim sw As StreamWriter = f.CreateText()
      
      sw.WriteLine("Hello, world!")
      
      sw.Close()
      
      Return f

   End Function 'CreateResourceFile
    
   
   Private Shared Function BuildDynAssembly() As AssemblyBuilder
      
      Dim myAsmFileName As String = "MyAsm.dll"
      
      Dim myDomain As AppDomain = Thread.GetDomain()
      Dim myAsmName As New AssemblyName()
      myAsmName.Name = "MyDynamicAssembly"
      
      Dim myAsmBuilder As AssemblyBuilder = myDomain.DefineDynamicAssembly(myAsmName, _
                        AssemblyBuilderAccess.RunAndSave)
      
      myAsmBuilder.AddResourceFile("MyResource", myResourceFileName)
      
      ' To confirm that the resource file has been added to the manifest,
      ' we will save the assembly as MyAsm.dll. You can view the manifest
      ' and confirm the presence of the resource file by running 
      ' "ildasm MyAsm.dll" from the prompt in the directory where you executed
      ' the compiled code. 
      myAsmBuilder.Save(myAsmFileName)
      
      Return myAsmBuilder

   End Function 'BuildDynAssembly
    
   
   Public Shared Sub Main()
      
      Dim myResourceFS As FileStream = Nothing
      
      CreateResourceFile()
      
      Console.WriteLine("The contents of MyResource.txt, via GetFile:")
      
      Dim myAsm As AssemblyBuilder = BuildDynAssembly()
      
      Try

         myResourceFS = myAsm.GetFile(myResourceFileName)

      Catch nsException As NotSupportedException
     
     Console.WriteLine("---")
     Console.WriteLine("System.Reflection.Emit.AssemblyBuilder.GetFile is not supported " + _
                 "in this SDK build.")
     Console.WriteLine("The file data will now be retrieved directly, via a new FileStream.")
     Console.WriteLine("---")
     myResourceFS = New FileStream(myResourceFileName, FileMode.Open) 

      End Try
      
      Dim sr As New StreamReader(myResourceFS, System.Text.Encoding.ASCII)
      Console.WriteLine(sr.ReadToEnd())
      sr.Close()

   End Sub

End Class

Açıklamalar

fileName başka bir kalıcı modül, tek başına yönetilen kaynak veya tek başına bildirim dosyası ile aynı olmamalıdır.

Dosyadaki yönetilen kaynakların genel olduğu varsayılır.

Belirtilen kaynak dosyası derlemenin kaydedileceği dizinde olmalıdır.

Not

.NET Framework 2.0 Service Pack 1'den başlayarak, bu üye artık bayrağını ReflectionPermissionFlag.ReflectionEmit gerektirmezReflectionPermission. (Bkz. Yansıma Yaymada Güvenlik Sorunları.) Bu işlevselliği kullanmak için uygulamanızın .NET Framework 3.5 veya sonraki bir sürümü hedeflemesi gerekir.

Şunlara uygulanır

AddResourceFile(String, String, ResourceAttributes)

Var olan bir kaynak dosyasını bu derlemeye ekler.

public:
 void AddResourceFile(System::String ^ name, System::String ^ fileName, System::Reflection::ResourceAttributes attribute);

public void AddResourceFile (string name, string fileName, System.Reflection.ResourceAttributes attribute);

member this.AddResourceFile : string * string * System.Reflection.ResourceAttributes -> unit

Public Sub AddResourceFile (name As String, fileName As String, attribute As ResourceAttributes)

Parametreler

name: String

Kaynağın mantıksal adı.

fileName: String

Mantıksal adın eşlendiği fiziksel dosya adı (.resources dosyası). Bu bir yol içermemelidir; dosya, eklendiği derlemeyle aynı dizinde olmalıdır.

attribute: ResourceAttributes

Kaynak öznitelikleri.

Özel durumlar

ArgumentException

name daha önce tanımlanmıştır.

-veya-

Derlemede adlı fileNamebaşka bir dosya var.

-veya-

uzunluğu name sıfır veya uzunluğu fileName sıfır ise.

-veya-

fileName bir yol içerir.

ArgumentNullException

name veya fileName şeklindedir null.

FileNotFoundException

Dosya fileName bulunamazsa.

SecurityException

Çağıranın gerekli izni yok.

Örnekler

Aşağıdaki kod örneği, kullanarak AddResourceFiledinamik olarak oluşturulmuş bir derlemeye kaynak dosyasının nasıl eklenerek oluşturulduğunu gösterir.

using namespace System;
using namespace System::IO;
using namespace System::Threading;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
ref class AsmBuilderGetFileDemo
{
public:
   static String^ myResourceFileName = "MyResource.txt";
   static FileInfo^ CreateResourceFile()
   {
      FileInfo^ f = gcnew FileInfo( myResourceFileName );
      StreamWriter^ sw = f->CreateText();
      sw->WriteLine( "Hello, world!" );
      sw->Close();
      return f;
   }

   static AssemblyBuilder^ BuildDynAssembly()
   {
      String^ myAsmFileName = "MyAsm.dll";
      AppDomain^ myDomain = Thread::GetDomain();
      AssemblyName^ myAsmName = gcnew AssemblyName;
      myAsmName->Name = "MyDynamicAssembly";
      AssemblyBuilder^ myAsmBuilder = myDomain->DefineDynamicAssembly( myAsmName, AssemblyBuilderAccess::RunAndSave );
      myAsmBuilder->AddResourceFile( "MyResource", myResourceFileName );
      
      // To confirm that the resource file has been added to the manifest,
      // we will save the assembly as MyAsm.dll. You can view the manifest
      // and confirm the presence of the resource file by running
      // "ildasm MyAsm.dll" from the prompt in the directory where you executed
      // the compiled code.
      myAsmBuilder->Save( myAsmFileName );
      return myAsmBuilder;
   }

};

int main()
{
   FileStream^ myResourceFS = nullptr;
   AsmBuilderGetFileDemo::CreateResourceFile();
   Console::WriteLine( "The contents of MyResource.txt, via GetFile:" );
   AssemblyBuilder^ myAsm = AsmBuilderGetFileDemo::BuildDynAssembly();
   try
   {
      myResourceFS = myAsm->GetFile( AsmBuilderGetFileDemo::myResourceFileName );
   }
   catch ( NotSupportedException^ ) 
   {
      Console::WriteLine( "---" );
      Console::WriteLine( "System::Reflection::Emit::AssemblyBuilder::GetFile\nis not supported in this SDK build." );
      Console::WriteLine( "The file data will now be retrieved directly, via a new FileStream." );
      Console::WriteLine( "---" );
      myResourceFS = gcnew FileStream( AsmBuilderGetFileDemo::myResourceFileName,FileMode::Open );
   }

   StreamReader^ sr = gcnew StreamReader( myResourceFS,System::Text::Encoding::ASCII );
   Console::WriteLine( sr->ReadToEnd() );
   sr->Close();
}


using System;
using System.IO;
using System.Threading;
using System.Reflection;
using System.Reflection.Emit;

class AsmBuilderGetFileDemo

{
   private static string myResourceFileName = "MyResource.txt";

   private static FileInfo CreateResourceFile()
   {

        FileInfo f = new FileInfo(myResourceFileName);
    StreamWriter sw = f.CreateText();

    sw.WriteLine("Hello, world!");

    sw.Close();

    return f;
   }

   private static AssemblyBuilder BuildDynAssembly()
   {

    string myAsmFileName = "MyAsm.dll";
    
    AppDomain myDomain = Thread.GetDomain();
    AssemblyName myAsmName = new AssemblyName();
    myAsmName.Name = "MyDynamicAssembly";	

    AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(
                        myAsmName,
                        AssemblyBuilderAccess.RunAndSave);

    myAsmBuilder.AddResourceFile("MyResource", myResourceFileName);

    // To confirm that the resource file has been added to the manifest,
    // we will save the assembly as MyAsm.dll. You can view the manifest
    // and confirm the presence of the resource file by running
    // "ildasm MyAsm.dll" from the prompt in the directory where you executed
    // the compiled code.

    myAsmBuilder.Save(myAsmFileName);	

    return myAsmBuilder;
   }

   public static void Main()
   {

    FileStream myResourceFS = null;

    CreateResourceFile();

    Console.WriteLine("The contents of MyResource.txt, via GetFile:");

    AssemblyBuilder myAsm = BuildDynAssembly();

    try
        {
       myResourceFS = myAsm.GetFile(myResourceFileName);
        }
    catch (NotSupportedException)
    {
       Console.WriteLine("---");
       Console.WriteLine("System.Reflection.Emit.AssemblyBuilder.GetFile\nis not supported " +
                 "in this SDK build.");
       Console.WriteLine("The file data will now be retrieved directly, via a new FileStream.");
       Console.WriteLine("---");
       myResourceFS = new FileStream(myResourceFileName,
                     FileMode.Open);
    }
    
    StreamReader sr = new StreamReader(myResourceFS, System.Text.Encoding.ASCII);
    Console.WriteLine(sr.ReadToEnd());
    sr.Close();
   }
}


Imports System.IO
Imports System.Threading
Imports System.Reflection
Imports System.Reflection.Emit

 _

Class AsmBuilderGetFileDemo
   
   Private Shared myResourceFileName As String = "MyResource.txt"
   
   
   Private Shared Function CreateResourceFile() As FileInfo
      
      Dim f As New FileInfo(myResourceFileName)
      Dim sw As StreamWriter = f.CreateText()
      
      sw.WriteLine("Hello, world!")
      
      sw.Close()
      
      Return f

   End Function 'CreateResourceFile
    
   
   Private Shared Function BuildDynAssembly() As AssemblyBuilder
      
      Dim myAsmFileName As String = "MyAsm.dll"
      
      Dim myDomain As AppDomain = Thread.GetDomain()
      Dim myAsmName As New AssemblyName()
      myAsmName.Name = "MyDynamicAssembly"
      
      Dim myAsmBuilder As AssemblyBuilder = myDomain.DefineDynamicAssembly(myAsmName, _
                        AssemblyBuilderAccess.RunAndSave)
      
      myAsmBuilder.AddResourceFile("MyResource", myResourceFileName)
      
      ' To confirm that the resource file has been added to the manifest,
      ' we will save the assembly as MyAsm.dll. You can view the manifest
      ' and confirm the presence of the resource file by running 
      ' "ildasm MyAsm.dll" from the prompt in the directory where you executed
      ' the compiled code. 
      myAsmBuilder.Save(myAsmFileName)
      
      Return myAsmBuilder

   End Function 'BuildDynAssembly
    
   
   Public Shared Sub Main()
      
      Dim myResourceFS As FileStream = Nothing
      
      CreateResourceFile()
      
      Console.WriteLine("The contents of MyResource.txt, via GetFile:")
      
      Dim myAsm As AssemblyBuilder = BuildDynAssembly()
      
      Try

         myResourceFS = myAsm.GetFile(myResourceFileName)

      Catch nsException As NotSupportedException
     
     Console.WriteLine("---")
     Console.WriteLine("System.Reflection.Emit.AssemblyBuilder.GetFile is not supported " + _
                 "in this SDK build.")
     Console.WriteLine("The file data will now be retrieved directly, via a new FileStream.")
     Console.WriteLine("---")
     myResourceFS = New FileStream(myResourceFileName, FileMode.Open) 

      End Try
      
      Dim sr As New StreamReader(myResourceFS, System.Text.Encoding.ASCII)
      Console.WriteLine(sr.ReadToEnd())
      sr.Close()

   End Sub

End Class

Açıklamalar

fileName başka bir kalıcı modül, tek başına yönetilen kaynak veya tek başına bildirim dosyası ile aynı olmamalıdır.

Yönetilen kaynak için öznitelikler belirtilebilir.

Belirtilen kaynak dosyası derlemenin kaydedileceği dizinde olmalıdır.

Not

Şunlara uygulanır

Aracılığıyla paylaş

AssemblyBuilder.AddResourceFile Yöntem

Tanım

Aşırı Yüklemeler

AddResourceFile(String, String)

Parametreler

Özel durumlar

Örnekler

Açıklamalar

Şunlara uygulanır

AddResourceFile(String, String, ResourceAttributes)

Parametreler

Özel durumlar

Örnekler

Açıklamalar

Şunlara uygulanır

Ek kaynaklar