How to read documents on another computer connected to the same wifi network
How to connect two computers on the same wifi network
Network Policy Server denied access to a user.
i used to connect the WIFI via RADIUS NPS server, but on the server i got the below error logs then i check the certificate on the NPS event, i find below, how do i fix it and make the WIFI user connect though Radius authority. Network Policy Server…
How do I fix slow 10G NICs in Windows 11 Pro
I can only get them to run at 2 Gbits/sec per iperf3 in Windows 11 Pro 23H2 64-bit using a 50 foot Cat 8 patch cable to connect the computers directly (ASUS Prime Z370-P motherboard; Intel Core i7-8700K processor). They are Intel X550-T2 and Asus…
sc-status 200 sc-win32status 64
I have an F5 load balancing setup configured with two servers. My MVC web application, which incorporates jQuery, and Bootstrap, is hosted on an IIS server with an SSL certificate. However, when accessing the application via HTTPS from outside the…
![](https://techprofile.blob.core.windows.net/images/1P-HevJX50CFOQJZsnsiMg.png?8D86C2)
LoopBack adapter not saving ip address
Hi, I am trying to create 3 loopback adapters with the following IP address suffixes 0.100, 0.200, 1.200. I have set up the 0.100 fine but the other 2 always revert back to an automatic IP after I have entered the static. It just wipes the whole IP. I…
Windows 11 doesn't support RFC 7217 - IPv6 Static Privacy SLAAC
I read online that windows should support (as almost all modern OS) RFC 7217 for IPv6. I have the latest Windows 11 Dev Insider, but it doesn't seem to work. RFC 7217 states that it should be possible to set a STATIC SLAAC suffix without exposing MAC…
How to allow non Admin local Users to change/Vlan ID on Windows 11?
Hello, I'm wondering how to allow non admin local users to set VlanID on the network adapter. Currently the user is part of the Network Configuration Operators but when I have have the user try go set it, the advanced tab that normally allows this…
TCP/IP concurrent connections
Hi When the TCP/IP connections reached 500 , the applications get hanged or getting too much slow, and it speed up slowly when the connection count decreases . So what is the maximum connection that we can have in a Windows server2016, is there anyway we…
Hosted Network doesn't remove the initial IP when I set a new one via control panel, resulting with multiple IPs.
I am trying to set a static IP address for a hosted network, created via command prompt. I used to set the IP address from control panel settings with no problems. Now, when I do the same, I get a problem. The new IP address is successfully added,…
setting new computers to let users log in from any pc in the office
we are going to replace all windows 10 desktop that we have for new windows 11 desktops. How could i setup so that any user can log in to any of the new desktops with their email and password?
![](https://techprofile.blob.core.windows.net/images/Nd_pi7-IHkuDC3BVgl0RFQ.png?8D81F2)
Why can I see only one PC in the network on both PCs but the other PC doesn't show up at all on either?
After confirming both of my PCs have all the "File and Printer Sharing" "on," PC1 is able to see and access PC2, but not see itself, PC1. PC2 can see itself and not see PC1. So Both PCs see PC2, but NIETHER PC see PC1.
![](https://techprofile.blob.core.windows.net/images/iUn-b9_AMkuBikaCwNTSLQ.png?8DA1C2)
what solution has replaced microsoft Network Access Protection (NAP)
NAP is a client health policy creation, enforcement, and remediation technology. With NAP, system administrators can establish and automatically enforce health policies, which can include software requirements, security update requirements, and other…
Too many clicks to launch Microsoft VPN under Windows 11
A few years ago, I created a custom Windows VPN client install using the Connection Manager Administration Kit. This generates an installable copy (*.exe) of our VPN configuration which I deploy to our PC's when they are built. Running the installation…
Intermittent Net::ERR_CONNECTION_RESET Error and Incomplete Loading over HTTPS
I have an F5 load balancing setup configured with two servers. My MVC web application, which incorporates Kendo UI, jQuery, and Bootstrap, is hosted on an IIS server with an SSL certificate. However, when accessing the application via HTTPS from outside…
![](https://techprofile.blob.core.windows.net/images/lvNaBJBqh0eurOu4q2bQSQ.png?8DA4E8)
vLANs in Windows 11 using Intel PROSet
Witam wszystkich! Od kilku dni staram się ustawić wirtualne karty sieciowe celem skonfigurowania VLANów na komputerze HP ProOne 440. Wszystko to robię na karcie sieciowej Intel I219-LM oraz na Windows 11 Pro ! Tu właśnie jest problem, bo w wielu…
![](https://techprofile.blob.core.windows.net/images/d-l7UytvV0isqwcBcDEnJA.png?8DAF56)
![](https://techprofile.blob.core.windows.net/images/iUn-b9_AMkuBikaCwNTSLQ.png?8DA1C2)
How do you setup NPS for VPN and Wireless Radius authentication on the same site(DC)
I have an existing NPS for VPN and would like to know to add another for Wireless Enterprise authentication. Any help with be much appreciated
How to assign a SSID to a specific Wifi adapter, while the other one is not affected
Hello, for my Laptop with Windows 11 I have two WiFi adapters. One of them I want to bind to a specific SSID of a device, which is acting like a access point, but without routing or gateway to the internet. This adapter should only connect to this SSID.…
UN/PW for shared folder (CIFS) not accept on one PC but it is on all others
I recently installed a NAS and created a shared folder (CIFS) To connect and map it, I ran: \\192.168.x.x. UN/PW. Selected to map it and done. This worked fine on 4 of the 5 Windows 11 PCs in my house. The fifth one is constantly getting a message that…
1 of 2 hosts request timed out ping but all VMs can talk to each other.
Good day, I am new to Hyper-V (normally VMWare tech) but this takes the cake no matter what you are working on. I have two Dell servers each hosting Hyper-V manager (we will call these SR1 and SR2 for this conversation). There are 3 VMs on each SR. SR1…
Local server does not respond to ping
Hello I have the following concern, I have a server where I connect remotely. However, in order to connect to that server, I must first enter another server and then connect to remote desktop. What strikes me is that when I connect to the server,…